Daytime CO2 urban surface fluxes from airborne measurements, eddy-covariance observations and emissions inventory in Greater London

Airborne measurements within the urban mixing layer (360 m) over Greater London are used to quantify CO2 emissions at the meso-scale. Daytime CO2 fluxes, calculated by the Integrative Mass Boundary Layer (IMBL) method, ranged from 46 to 104 μmol CO2 m−2 s−1 for four days in October 2011. The day-to-day variability of IMBL fluxes is at the same order of magnitude as for surface eddy-covariance fluxes observed in central London. Compared to fluxes derived from emissions inventory, the IMBL method gives both lower (by −37%) and higher (by 19%) estimates. The sources of uncertainty of applying the IMBL method in urban areas are discussed and guidance for future studies is given.

Floristic inventory of cerrado at Pedregulho, Sao Paulo State, Brazil

Pedregulho municipality in the far northeastern region of Sao Paulo state has fragments of cerrado vegetation thought to be floristically distinct from other cerrado remmants in the state. In this study, a floristic survey was carried out at Pedregulho, focusing on two geologically distinct regions: Furnas do Bom Jesus State Park and the Estreito district. In each region, 50x50 m plots were set up for a total sample area of 1 hectare, where 65 families and 379 angiosperm species were recorded. Collecting efforts in adjacent areas resulted in a total of 71 families and 443 species. The two study areas had low floristic similarity. Geographic species distribution was analyzed and eight patterns were defined for those species restricted to the Pedregulho region in Sao Paulo.

Childbirth self-efficacy inventory in Tanzania : a pilot study

Background. To give birth can be a stressful experience and women cope with thisstress in many different ways and have different personal outcomes. Self-efficacy orconfidence in ability to cope with labour can be considered as an important factoraffecting pregnant women’s motivation of normal childbirth and their interpretation ofthe childbirth event.The aim. The purpose of this study was to test the Chinese short form of theinstrument Childbirth self-efficacy instrument (CBSEI) in Tanzania, that measurepregnant women’s self-confidence and coping abilities during childbirth.Method. The Chinese short form of the CBSEI was used to pilot test the pregnantwomen’s confidence of childbirth to see if the questions were understood in theTanzanian culture. Besides this instrument socio-demographic data was collectedtogether with two open questions asking about attitudes and experiences of childbirth.The instrument was translated into Kiswahili. A sample of 60 pregnant women whowere visiting antenatal clinic (ANC) regularly were asked to participate and with helpfrom midwifes at two ANC places the questionnaires were filled out.Result. The result shows that the validity and reliability of the two subscales OE-16and EE-16 were established. The internal consistency reliability of the two subscaleswere high, suggesting that each of the subscale mean score provides a good overviewof self- reported belief in coping ability for childbirth.The results further show that the instrument, CBSEI in this pilot study is not able toidentify women who need extra support during childbirth.Conclusion. The reliability and validity of information presented in this pilot studysupport the use of the Chinese short form of the CBSEI as a research instrument in theTanzania culture. Further studies are recommended to get a wider understandingabout women’s coping abilities in a culture like Tanzania.

INVENTORY CONTROL SYSTEM : Optimization of production system and reliability

The main idea of this research to solve the problem of inventory management for the paper industry SPM PVT limited. The aim of this research was to find a methodology by which the inventory of raw material could be kept at minimum level by means of buffer stock level.The main objective then lies in finding the minimum level of buffer stock according to daily consumption of raw material, finding the Economic Order Quantity (EOQ) reorders point and how much order will be placed in a year to control the shortage of raw material.In this project, we discuss continuous review model (Deterministic EOQ models) that includes the probabilistic demand directly in the formulation. According to the formula, we see the reorder point and the order up to model. The problem was tackled mathematically as well as simulation modeling was used where mathematically tractable solution was not possible.The simulation modeling was done by Awesim software for developing the simulation network. This simulation network has the ability to predict the buffer stock level based on variable consumption of raw material and lead-time. The data collection for this simulation network is taken from the industrial engineering personnel and the departmental studies of the concerned factory. At the end, we find the optimum level of order quantity, reorder point and order days.

Psychometric evaluation of the body change inventory: an assessment instrument for adolescent boys and girls

A new instrument, the Body Change Inventory, was developed to provide an assessment of body change strategies that are used by both adolescent girls and boys. The novel aspect of this instrument is that it evaluates strategies to increase body size and increase muscle size, as well strategies to decrease body size. Independent samples of adolescent girls and boys aged between 11 and 17 years (N=1732) participated in four studies. The revised instrument consisted of three body change scales—Strategies to Decrease Body Size, Strategies to Increase Body Size, and Strategies to Increase Muscle Size. The studies demonstrated content validity, construct validity, internal consistency, and concurrent and discriminant validity for the new scales. The new scales provide a valuable addition in the literature for assessing three global body change strategies among adolescent girls and boys. They are needed in order to examine further the normative development of different kinds of body change strategies and how these may lead to behavioural problems such as disordered eating, exercise dependence, and steroid use.

The reliability, validity, discriminant and predictive properties of the social Phobia Inventory (SoPhI)

This paper reports on the psychometric properties of the Social Phobic Inventory (SoPhI) a 21-item scale that was designed to measure social anxiety according to the criteria of DSM-IV (American Psychiatric Association, APA (1994) Diagnostic and Statistical Manual of Mental Disorder , 4th Edn., Washington). Factor analysis of the SoPhI using data from a clinical sample of respondents with social phobia revealed one factor which explained approximately 59% of variance and which demonstrated strong internal reliability ( agr= 0.93). The SoPhI demonstrated concurrent validity with the SPAI ( r = 0.86) and convergent validity with the Fear of Negative Evaluations-Revised ( r = 0.68). The predictive utility of the scale was demonstrated in a sample of university students classified as extroverted, normal, shy/introverted, and phobic/withdrawn ( -2 57%). Multivariate Analysis of Variance (MANOVA) revealed that the combined university sample differed from the clinical sample on the summated scores on the SoPhI and that 43% ( -2 ) of this difference was attributable to group membership. This figure rose to 58% attributable to group membership when these same groups were compared for differences on the 21 individual items. Scores of the SoPhI that are indicative of concern and of possible diagnostic criteria, as well as suggestions for future research, are discussed.

Hybrid life-cycle inventory for road construction and use

Life-cycle assessment (LCA) is a technique that is used worldwide by clients and their design team to assess the impact of
their projects on the environment. The main advantage of LCA is in supporting decision making with quantitative data. LCA inventories
can be either fully developed or streamlined. Fully developed LCAs are time-consuming and costly to prepare. Streamlined LCAs can be
used as an effective decision-making tool when considering environmental performance during the design process, but with a loss of
inventory completeness. Acknowledging the advantages and disadvantages of both types of LCA, this paper proposes a hybrid LCA
method that uses input-output data to fill in those gaps routinely left in conventional LCA inventories.

Revising the critical care family needs inventory for the emergency department

Background: The Critical Care Family Needs Inventory (CCFNI) has been used widely over the last two decades for analysing the needs of family members in the intensive care unit. However, it has significant limitations as a needs assessment tool for use with families in the Emergency Department (ED). This paper discusses the methodological challenges encountered during the process of reviewing and adapting this tool for use in the ED. Aims: The purpose of this study was to revise and adapt the CCFNI for use with a population of family members of critically ill patients in an Australian Emergency Department. Instrument: The process of tool revision, adaptation and reconstruction included: critique of the CCFNI; concept definition; item review; content and structure revision; scale revision; and testing with a sample of the target population. Methods: Data collection methods were aimed at accessing a vulnerable population, while enhancing response rate and data quality. A sample of 84 relatives of critically ill patients from one Melbourne Metropolitan Emergency Department was used, 73% of whom returned questionnaires. Results: Pilot data were examined with the specific purpose of identifying elements of the tool that required refinement or modification. Methods used for establishing reliability and validity of the revised tool provided satisfactory results. Limitations: Limitations of this study include inadequate sample size for exploratory factor analysis, and an incomplete response set for some items, which influenced item analysis. Conclusion: The process used for addressing the identified methodological issues in reviewing and adapting the CCFNI for use in the ED provides a framework for adapting an established tool for a specific purpose.

Using bottlenecks to control production inventory

In this paper, we investigate how to best optimise the level of Production Inventory or Work In Progress (WIP) in a factory. Using a simulation model of the factory, we show that a level of inventory can be optimised by controlling the buffer levels of the key bottleneck workcenters. By firstly identifying the key bottlenecks, and then systematically reducing the maximum buffer level for each bottleneck, results show that the throughput does not drop rapidly from it's high levels until the WIP is halved. Conversely, the production lead time decreases rapidly and levels out around the point of the optimum WIP level.

Preliminary validation of the Chinese version of the pediatric quality of life inventory

The Pediatric Quality of Life Inventory (PedsQL) is a scale for assessing health-related quality of life of children and adolescents aged 2-18 years. Three reports of PedsQL for the age ranges 2-4 years and 5-7 years were translated into Chinese and their validities were examined. A total of 186 children and parents were involved in the study. Content validity, test-retest reliability, internal consistency reliability and construct validity were assessed. The correlation of parents' and children's reports was also examined. The results showed that the internal consistency is generally good, test-retest reliability ranged from moderate to good, differences between disabled and non-disabled individuals are significant in total scores and in all subscales except for the physical functioning subscale for the children's self-report for the age ranges of 2-4 years and 5-7 years and the correlation between the reports of the parents and children for the age range of 5-7 years is moderate to high. This suggests that the newly translated Chinese PedsQL for children aged 2-4 years and 5-7 years seems to be reliable and valid to be used as a measure of health-related quality of life in Chinese pediatric research and clinical applications.

A life cycle inventory of aluminium die casting

As part of an ongoing project, a life cycle inventory (LCI) of aluminium high pressure die casting (HPDC) has been collected. This has been conducted from the view of an individual product and also the entire process. The objective of the study was to analyse the process and suggest changes to reduce environmental impacts. One modem aluminium high pressure die casting plant located in Victoria, Australia was evaluated and modelled. Site specific data on energy and materials was gathered and the process was modelled using a typical automotive component. The paper also presents our experience and methodology used in this inventory data collection process from the real industry for LCA purposes. The inventory data collected itself reveals that the HPDC process is energy intensive and as such the major emissions were from the use of natural gas fired furnaces and from the brown coal derived electricity. It is also found the large environmental benefits of using secondary aluminium over primary aluminium in the HPDC process. A detailed LCA is being cal1ied out based on the inventory obtained.

Personality-based typology of adolescent sexual offenders using the Millon Adolescent Clinical Inventory

Previous research suggests that identifying specific subgroups amongst the population of adolescent sexual offenders may contribute to understanding the aetiology of their offending. Such knowledge may also help to improve the treatment outcomes for this group. The Millon Adolescent Clinical Inventory (MACI) profiles of 25 adolescent male sexual offenders aged 13 to 17 in a community-based treatment sample were analysed to determine if this measure could be used to identify different subtypes of offenders based on personality variables. Three groups were identified by cluster analysis: one group of antisocial and externalising types (n = 11), another group of withdrawn, socially inadequate types (n = 7) and a third group displaying few traits of clinically significant elevation (n = 7). Support was also shown for the hypothesis that adolescent sexual offenders exhibit personality profiles similar to those of delinquent non-sexual offenders. The observed typology suggests potentially different etiological pathways and different treatment needs.