Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review

Wet agglomeration processes have traditionally been considered an empirical art, with great difficulties in predicting and explaining observed behaviour. Industry has faced a range of problems including large recycle ratios, poor product quality control, surging and even the total failure of scale up from laboratory to full scale production. However, in recent years there has been a rapid advancement in our understanding of the fundamental processes that control granulation behaviour and product properties. This review critically evaluates the current understanding of the three key areas of wet granulation processes: wetting and nucleation, consolidation and growth, and breakage and attrition. Particular emphasis is placed on the fact that there now exist theoretical models which predict or explain the majority of experimentally observed behaviour. Provided that the correct material properties and operating parameters are known, it is now possible to make useful predictions about how a material will granulate. The challenge that now faces us is to transfer these theoretical developments into industrial practice. Standard, reliable methods need to be developed to measure the formulation properties that control granulation behaviour, such as contact angle and dynamic yield strength. There also needs to be a better understanding of the flow patterns, mixing behaviour and impact velocities in different types of granulation equipment. (C) 2001 Elsevier Science B.V. All rights reserved.

Effects of slurry rheology on industrial grinding performance

To determine the effect of slurry rheology on industrial grinding performance, 45 surveys were conducted on 16 full-scale grinding mills in five sites. Four operating variables - mill throughput, slurry density, slurry viscosity and feed fines content-were investigated. The rheology of the mill discharge slurries was measured either on-line or off-line, and the data were processed using a standard procedure to obtain a full range of flow curves. Multi-linear regression was employed as a statistical analysis tool to determine whether or not rheological effects exert an influence on industrial grinding, and to assess the influence of the four mill operating conditions on mill performance in terms of the Grinding Index, a criterion describing the overall breakage of particles across the mill. The results show that slurry rheology does influence industrial grinding. The trends of these effects on Grinding Index depend upon the rheological nature of the slurry-whether the slurries are dilatant or pseudoplastic, and whether they exhibit a high or low yield stress. The interpretation of the regression results is discussed, the observed effects are summarised, and the potential for incorporating rheological principles into process control is considered, Guidelines are established to improve industrial grinding operations based on knowledge of the rheological effects. This study confirms some trends in the effect of slurry rheology on grinding reported in the literature, and extends these to a broader understanding of the relationship between slurry properties and rheology, and their effects on industrial milling performance. (C) 2002 Elsevier Science B.V. All rights reserved.

Investigation of candidate division TM7, a recently recognized major lineage of the domain bacteria with no known pure-culture representatives

A molecular approach was used to investigate a recently described candidate division of the domain Bacteria, TM7, currently known only from environmental 16S ribosomal DNA sequence data, A number of TM7-specific primers and probes were designed and evaluated. Fluorescence in situ hybridization (FISH) of a laboratory scale bioreactor using two independent TM7-specific probes revealed a conspicuous sheathed-filament morphotype, fortuitously enriched in the reactor. Morphologically, the filament matched the description of the Eikelboom morphotype 0041-0675 widely associated with bulking problems in activated-sludge wastewater treatment systems. Transmission electron microscopy of the bioreactor sludge demonstrated that the sheathed-filament morphotype had a typical gram-positive cell envelope ultrastructure. Therefore, TM7 is only the third bacterial lineage recognized to have gram-positive representatives. TM7-specific FISH analysis of two full-scale wastewater treatment plant sludges, including the one used to seed the laboratory scale reactor, indicated the presence of a number of morphotypes, including sheathed filaments. TM7-specific PCR clone libraries prepared from the two full-scale sludges yielded 23 novel TM7 sequences. Three subdivisions could be defined based on these data and publicly available sequences. Environmental sequence data and TM7-specific FISH analysis indicate that members of the TM7 division are present in a variety of terrestrial, aquatic, and clinical habitats. A highly atypical base substitution (Escherichia coli position 912; C to U) for bacterial 16S rRNAs was present in almost all TM7 sequences, suggesting that TM7 bacteria, like Archaea, may be streptomycin resistant at the ribosome level.

Variation of bulk properties of anaerobic granules with wastewater type

Development of a granular sludge with high strength, high biological activity and a narrow settling distribution is necessary for optimal operation of high-rate upflow anaerobic treatment systems. Several studies have compared granules produced from different wastewaters but these have largely been from laboratory-fed reactors or compared granules from full-scale reactors fed similar wastewater types. Though two authors have commented on the inferiority of granules produced by a protein-based feed, the properties of these granules have not been characterised. In this paper, granules from full-scale reactors treating fruit and vegetable cannery effluent, two brewery effluents and a pig abattoir (slaughterhouse) were compared in terms of basic composition, size distribution, density, settling velocity, shear strength, and EPS content. The results supported previous qualitative observations by other researchers that indicate granule properties depend more on wastewater type rather than reactor design or operating conditions such as pre-acidification level. The cannery-fed granules bad excellent shear strength, settling distribution and density. Granules from the two brewery-fed reactors had statistically the same bulk properties, which were still acceptable for upflow applications. The protein-grown granule had poor strength and settling velocity. (C) 2001 Elsevier Science Ltd. All rights reserved.

Exceptionally high-rate nitrification in sequencing batch reactors treating high ammonia landfill leachate

The nitrogen removal capacity of a suspended culture system treating mature landfill leachate was investigated. Leachate containing high ammonium levels of 300-900 mg N/L was nitrified in a bench scale sequencing batch reactor. Leachate from four different landfills was treated over a two year period for the removal of nitrogen. In this time, a highly specific nitrifying culture was attained that delivered exceptionally high rates of ammonia removal. No sludge was wasted from the system to increase the throughput and up to 13 g/L of MLSS was obtained. Settleability of the purely nitrifying biomass was excellent with SVI less than 40 mL/g, even at the high sludge concentrations. Nitrification rates up to 246 mg NI(L h) (5.91 g N/(L d)) and specific nitrification rates of 36 mg N/(gVSS h) (880 mg N/(gVSS d)) were obtained. The loading to the system at this time allowed complete nitrification of the leachate with a hydraulic retention time of only 5 hours. Following these successful treatability studies, a full-scale plant was designed and built at one of the landfills investigated.

Theoretical and experimental studies of unbraced tubular trusses allowing for torsional stiffness

This paper describes the buckling phenomenon of a tubular truss with unsupported length through a full-scale test and presents a practical computational method for the design of the trusses allowing for the contribution of torsional stiffness against buckling, of which the effect has never been considered previously by others. The current practice for the design of a planar truss has largely been based on the linear elastic approach which cannot allow for the contribution of torsional stiffness and tension members in a structural system against buckling. The over-simplified analytical technique is unable to provide a realistic and an economical design to a structure. In this paper the stability theory is applied to the second-order analysis and design of the structural form, with detailed allowance for the instability and second-order effects in compliance with design code requirements. Finally, the paper demonstrates the application of the proposed method to the stability design of a commonly adopted truss system used in support of glass panels in which lateral bracing members are highly undesirable for economical and aesthetic reasons.

Model-based analysis of anaerobic acetate uptake by a mixed culture of polyphosphate-accumulating and glycogen-accumulating organisms

An increasing number of studies shows that the glycogen-accumulating organisms (GAOs) can survive and may indeed proliferate under the alternating anaerobic/aerobic conditions found in EBPR systems, thus forming a strong competitor of the polyphosphate-accumulating organisms (PAOs). Understanding their behaviors in a mixed PAO and GAO culture under various operational conditions is essential for developing operating strategies that disadvantage the growth of this group of unwanted organisms. A model-based data analysis method is developed in this paper for the study of the anaerobic PAO and GAO activities in a mixed PAO and GAO culture. The method primarily makes use of the hydrogen ion production rate and the carbon dioxide transfer rate resulting from the acetate uptake processes by PAOs and GAOs, measured with a recently developed titration and off-gas analysis (TOGA) sensor. The method is demonstrated using the data from a laboratory-scale sequencing batch reactor (SBR) operated under alternating anaerobic and aerobic conditions. The data analysis using the proposed method strongly indicates a coexistence of PAOs and GAOs in the system, which was independently confirmed by fluorescent in situ hybridization (FISH) measurement. The model-based analysis also allowed the identification of the respective acetate uptake rates by PAOs and GAOs, along with a number of kinetic and stoichiometric parameters involved in the PAO and GAO models. The excellent fit between the model predictions and the experimental data not involved in parameter identification shows that the parameter values found are reliable and accurate. It also demonstrates that the current anaerobic PAO and GAO models are able to accurately characterize the PAO/GAO mixed culture obtained in this study. This is of major importance as no pure culture of either PAOs or GAOs has been reported to date, and hence the current PAO and GAO models were developed for the interpretation of experimental results of mixed cultures. The proposed method is readily applicable for detailed investigations of the competition between PAOs and GAOs in enriched cultures. However, the fermentation of organic substrates carried out by ordinary heterotrophs needs to be accounted for when the method is applied to the study of PAO and GAO competition in full-scale sludges. (C) 2003 Wiley Periodicals, Inc.

The influence of key chemical constituents in activated sludge on surface and flocculating properties

This paper examines the influence of the chemical constituents of activated sludge and extracted extracellular polymeric substances (EPS) on the surface properties, hydrophobicity, surface charge (SC) and flocculating ability (FA) of activated sludge floes. Activated sludge samples from 7 different full-scale wastewater treatment plants were examined. Protein and humic substances were found to be the dominant polymeric compounds in the activated sludges and the extracted EPS, and they significantly affected the FA and surface properties, hydrophobicity and SC, of the sludge floes. The polymeric compounds proteins, humic substances and carbohydrates in the sludge floes and the extracted EPS contributed to the negative SC, but correlated negatively to the hydrophobicity of sludge floes. The quantity of protein and carbohydrate within the sludge and the extracted EPS was correlated positively to the FA of the sludge floes, while increased amounts of humic substances resulted in lower FA. In contrast, increased amounts of total extracted EPS had a negative correlation to FA. The results reveal that the quality and quantity of the polymeric compounds within the sludge floes is more informative, with respect to understanding the mechanisms involved in flocculation, than if only the extracted EPS are considered. This is an important finding as it indicates that extracting EPS may be insufficient to characterise the EPS. This is due to the low extraction efficiency and difficulties involved in the separation of EPS from other organic compounds. Correlations were observed between the surface properties and FA of the sludge floes., This confirms that the surface properties of the, sludge flocs play an important role in the bioflocculation process but that also other interactions like polymer entanglement are important. (C) 2002 Elsevier Science Ltd. All rights reserved.

Impacts of structural characteristics on activated sludge floc stability

Activated sludge samples from seven full-scale plants were investigated in order to determine the relationship between floc structure and floc stability. Floc stability was determined by shear sensitivity and floc strength. Floc structure was considered in terms of two size scales, the micro- and macrostructure. The microstructure refers to the organization of the floc components, such as the individual microorganisms. The macrostructure refers to the overall floc. The floc macrostructure was characterized by filament index, sludge volume index, size, and fractal dimension. It had a significant impact on floc stability. Large and open floes with low fractal dimensions containing large number of filaments were more shear sensitive and had lower floc strength compared to small and dense floes. Fluorescent in situ hybridization analysis indicated that the organization of the bacterial cells might also have an effect on the floc stability. (C) 2003 Elsevier Ltd. All rights reserved.

Information technology supporting healthcare and social care services

The authors are developing a pilot project for a Municipality in the North of Portugal, envisaging the definition and implementation of an e-marketplace for healthcare and social services, in order to facilitate the interaction between healthcare and social services professionals and people with special needs (or their relatives). Based on the results of a survey on user needs analysis and expectations conducted in 2011, the paper discusses the relevance and interest of such platforms and the main drivers and motivations of the population for using such services, as well as which services would motivate citizens to use the platform. The results of the study will be used to select the products and services perceived to be the most desired by the potential users. The paper thus makes three main contributions: (1) the results of the study confirm the interest and the perceived potential of such a service, from the end-users perspective; (2) the findings support the advantage of expanding this pilot project to a full scale implementation; and (3) the performed analysis improves our understanding of the relations between the characteristics of the inquired population and the perceived interest in such platforms.

Controlo fotogramétrico da condição de estruturas quebra-mar

Dissertação de natureza Científica para obtenção do grau de Mestre em Engenharia Civil

Development of a new pultrusion equipment to manufacture thermoplastic matrix composite profiles

This paper describes the design and manufacture of a low-cost full scale pultrusion prototype equipment and discusses the production and obtained mechanical properties of polypropylene/glass (GF/PP) reinforced composite ba rs fabricated by using the prototype equipment. Three different GF/PP pre-impregnated ra w-materials, a commercial GF/PP comingled system from Vetrotex, a GF/PP powder coat ed towpreg [1-3] and, a GF/PP pre- consolidated tape (PCT) produced in our laboratorie s, were used in the production of composite bars that were subsequently submitted to mechanical testing in order to determine the relevant mechanical properties and quantify the consolidation quality. Samples of the different composite profiles were also observed und er SEM microscopy.

Reducing effective dose to a paediatric phantom by using different combinations of kVp, mAs and additional filtration whilst maintaining image quality

Purpose: To determine whether using different combinations of kVp and mAs with additional filtration can reduce the effective dose to a paediatric phantom whilst maintaining diagnostic image quality. Methods: 27 images of a paediatric AP pelvis phantom were acquired with different kVp, mAs and additional copper filtration. Images were displayed on quality controlled monitors with dimmed lighting. Ten diagnostic radiographers (5 students and 5 experienced radiographers) had eye tests to assess visual acuity before rating the images. Each image was rated for visual image quality against a reference image using 2 alternative forced choice software using a 5-point Likert scale. Physical measures (SNR and CNR) were also taken to assess image quality. Results: Of the 27 images rated, 13 of them were of acceptable image quality and had a dose lower than the image with standard acquisition parameters. Two were produced without filtration, 6 with 0.1mm and 5 with 0.2mm copper filtration. Statistical analysis found that the inter-rater and intra-rater reliability was high. Discussion: It is possible to obtain an image of acceptable image quality with a dose that is lower than published guidelines. There are some areas of the study that could be improved. These include using a wider range of kVp and mAs to give an exact set of parameters to use. Conclusion: Additional filtration has been identified as amajor tool for reducing effective dose whilst maintaining acceptable image quality in a 5 year old phantom.

Vibration control with shape-memory alloys in civil engineering structures

Dissertação apresentada à Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Doutor em Engenharia Civil

Dor crónica lombar : incapacidade auto-reportada em trabalhadores das IPSS de Arronches e sua relação com factores psicossociais e intensidade da dor

RESUMO: Vários estudos realizados sugerem que os factores psicossociais (nível de satisfação laboral; nível educacional; a catastrofização da dor e crenças de medoevitamento)têm um importante papel como factores associados ao desenvolvimento de cronicidade da DL (Krismer & van Tulder, 2007; Kwon et al., 2006; Leclerc et al., 2009; Pincus, Santos, Breen, Burton e Underwood., 2008.) Objectivo: Analisar a associação entre as variáveis catastrofização da dor, crenças de medo-evitamento da dor e intensidade da dor com a incapacidade funcional auto-reportada, numa amostra de indivíduos com DCL. Metodologia: A população alvo foi constituída por 160 funcionários da Santa Casa da Misericórdia e Centro de Bem Estar Social de Arronches. Integraram a amostra 133 funcionários que se disponibilizaram a responder aos diferentes instrumentos de avaliação utilizados (“Roland–Morris Disability Questionnaire”(RMQ); “ Questionário de Caracterização e Levantamento de Factores de Risco e Impacto associado à DCL”; “Pain Catastrophing Scale” (PCS) e o “Fear- Avoidance Beliefs Questionnaire” (FABQ). A recolha de dados realizou-se entre Agosto e Novembro de 2010. Resultados: Neste estudo, verificou-se que 39,1 % dos indivíduos referiam DCL não específica. Relativamente à incapacidade funcional autoreportada, obteve-se um score médio 5,87 no RMQ. Obteve-se um valor de rs=0,425,p<0,01, para a associação entre a catastrofização da dor e incapacidade. Relativamente à associação entre crenças de medo-evitamento, sub-escala actividade física e incapacidade, foi obtido o valor de rs= 0,074 e para a associação entre as crenças de medo-evitamento, sub-escala trabalho e incapacidade, verificou-se rs=0,422, p<0,01. No que respeita à associação entre percepção da intensidade dor actual e a incapacidade, obteve-se um valor rs= 0,177 e a associação entre a dor percepcionada em 2009 e incapacidade, aferiu um resultado de rs=0,291, p<0,05. Conclusão: Concluímos que existe uma associação moderada entre catastrofização da dor e a incapacidade funcional auto-reportada, e também entre crenças de medo-evitamento relativamente ao trabalho e a incapacidade funcional auto-reportada. Relativamente à associação entre a dor percepcionada em 2009 e a incapacidade funcional auto-reportada a associação é baixa. Não sendo encontrada associação entre crenças de medo-evitamento relativamente à actividade física e a incapacidade funcional auto-reportada, nem para a associação entre percepção da intensidade da dor actual e a incapacidade. Esta pesquisa contribuiu assim, para dar a conhecer factores relevantes avaliar em indivíduos com DCL, podendo a sua modificação contribuir para a prevenir maiores níveis de incapacidade funcional ou melhorar a efectividade do tratamento utilizado. --------------------ABSTRACT: Several studies suggest that psychosocial factors (level of job satisfaction, education level, and the pain catastrophizing and fear-avoidance beliefs) have an important role as factors associated with development of chronicity LBP (Krisma & van Tulder, 2007 ; Kwon et al., 2006, Leclerc et al. 2009; Pincus, Santos, Breen, Burton and Underwood., 2008.) Objective: To assess the association between the variables of pain catastrophizing, fear-avoidance beliefs, pain, intensity pain and self-reported functional disability in a sample of people with chronic LBP. Methodology: The study consisted of 160 employees of the Santa Casa da Misericórdia and Centro de Bem Estar Social of Arronches. Integrated sample of 133 employees who agreed to respond to different assessment tools used (Roland-Morris Disability Questionnaire (RMQ), "Questionnaire Survey of Characterization and Risk Factors and Impact associated with the DCL," "Pain Catastrophing Scale(PCS) and "Fear-Avoidance Beliefs Questionnaire (FABQ). Data collection took place between August and November 2010. Results: In this study, it was found that 39.1% of subjects reported no specific chronic LBP. For the self-reported functional disability, we obtained a medium score of 5.87 on the RMQ. We obtained a value of rs = 0.425, p <0.01, for the association between catastrophizing in pain and disability. Regarding the association between fear-avoidance beliefs, sub-scale physical activity and disability, was obtained a value of rs = 0.074 and for the association between fear-avoidance beliefs, sub-scale work and disability, there was rs = 0.422, p <0.01. Regarding the association between perceived pain intensity and pain disability present we obtained a value rs = 0.177 association between pain and perceived disability in 2009 and measured an outcome of rs = 0.291, p <0.05.Conclusion: That there is a moderate association between catastrophizing and pain self-reported functional disability, and also between fear-avoidance beliefs in relation to employment and self-reported functional disability. Regarding the association between pain and perceived disability in 2009 self-reported the association is low. Not being an association between earavoidance beliefs for physical activity and self-reported functional disability, or for the association between perception of current pain intensity and disability. This research contributed so, to disclose relevant factors evaluate in individuals with chronic LBP, its modification may help to prevent higher levels of functional disability or improve the effectiveness of treatment used.