880 resultados para Freedom of conscience
Resumo:
Subsurface geophysical surveys were carried out using a large range of methods in an unconfined sandstone aquifer in semiarid south-western Niger for improving both the conceptual model of water flow through the unsaturated zone and the parameterization of numerical a groundwater model of the aquifer. Methods included: electromagnetic mapping, electrical resistivity tomography (ERT), resistivity logging, time domain electromagnetic sounding (TDEM), and magnetic resonance sounding (MRS). Analyses of electrical conductivities, complemented by geochemical measurements, allowed us to identify preferential pathways for infiltration and drainage beneath gullies and alluvial fans. The mean water content estimated by MRS (13%) was used for computing the regional groundwater recharge from long-term change in the water table. The ranges in permeability and water content obtained with MRS allowed a reduction of the degree of freedom of aquifer parameters used in groundwater modelling.
Resumo:
Deep packet inspection is a technology which enables the examination of the content of information packets being sent over the Internet. The Internet was originally set up using “end-to-end connectivity” as part of its design, allowing nodes of the network to send packets to all other nodes of the network, without requiring intermediate network elements to maintain status information about the transmission. In this way, the Internet was created as a “dumb” network, with “intelligent” devices (such as personal computers) at the end or “last mile” of the network. The dumb network does not interfere with an application's operation, nor is it sensitive to the needs of an application, and as such it treats all information sent over it as (more or less) equal. Yet, deep packet inspection allows the examination of packets at places on the network which are not endpoints, In practice, this permits entities such as Internet service providers (ISPs) or governments to observe the content of the information being sent, and perhaps even manipulate it. Indeed, the existence and implementation of deep packet inspection may challenge profoundly the egalitarian and open character of the Internet. This paper will firstly elaborate on what deep packet inspection is and how it works from a technological perspective, before going on to examine how it is being used in practice by governments and corporations. Legal problems have already been created by the use of deep packet inspection, which involve fundamental rights (especially of Internet users), such as freedom of expression and privacy, as well as more economic concerns, such as competition and copyright. These issues will be considered, and an assessment of the conformity of the use of deep packet inspection with law will be made. There will be a concentration on the use of deep packet inspection in European and North American jurisdictions, where it has already provoked debate, particularly in the context of discussions on net neutrality. This paper will also incorporate a more fundamental assessment of the values that are desirable for the Internet to respect and exhibit (such as openness, equality and neutrality), before concluding with the formulation of a legal and regulatory response to the use of this technology, in accordance with these values.
Resumo:
The objective is to present the formulation of numerically integrated modified virtual crack closure integral technique for concentrically and eccentrically stiffened panels for computation of strain-energy release rate and stress intensity factor based on linear elastic fracture mechanics principles. Fracture analysis of cracked stiffened panels under combined tensile, bending, and shear loads has been conducted by employing the stiffened plate/shell finite element model, MQL9S2. This model can be used to analyze plates with arbitrarily located concentric/eccentric stiffeners, without increasing the total number of degrees of freedom, of the plate element. Parametric studies on fracture analysis of stiffened plates under combined tensile and moment loads have been conducted. Based on the results of parametric,studies, polynomial curve fitting has been carried out to get best-fit equations corresponding to each of the stiffener positions. These equations can be used for computation of stress intensity factor for cracked stiffened plates subjected to tensile and moment loads for a given plate size, stiffener configuration, and stiffener position without conducting finite element analysis.
Resumo:
This article analyses support for censorship in Russia as part of the democratization process. Censorship has been an important part of Russian history and it was strengthened during the Soviet era. After the collapse of the Soviet system formal censorship was banned even though the reality has been different. Therefore it is not strange that many Russians would like to limit the freedom of the media and to censor certain topics. The views of Russians on censorship have been studied on the basis of a survey carried out in 2007. According to the results, three different dimensions of censorship were found. These dimensions include moral censorship, political censorship, and censorship of religious materials. Support for these dimensions varies on the basis of socio-demographic characteristics and media use. The article concludes that many Russians reject new phenomena, while support for the censorship of political criticism is not as high, but political censorship seems to enjoy more support among elites than among the common people.
Resumo:
This paper makes explicit the relation between relative part position and kinematic freedom of the parts which is implicitly available in the literature. An extensive set of representative papers in the areas of assembly and kinematic modelling is reviewed to specifically identify how the ideas in the two areas are related and influencing the development of each other. The papers are categorised by the approaches followed in the specification, representation, and solution of the part relations. It is observed that the extent of the part geometry is not respected in modelling schemes and as a result, the causal flow of events (proximity–contact–mobility) during the assembling process is not realised in the existing modelling paradigms, which are focusing on either the relative positioning problem or the relative motion problem. Though an assembly is a static description of part configuration, achievement of this configuration requires availability of relative motion for bringing parts together during the assembly process. On the other hand, the kinematic freedom of a part depends on the nature of contacting regions with other parts in its static configuration. These two problems are thus related through the contact geometry. The chronology of the approaches that significantly contributed to the development of the subject is also included in the paper.
Resumo:
This paper deals with the kinematics of pantograph masts. Pantograph masts have widespread use in space application as deployable structures. They are over constrained mechanisms with degree-of-freedom, evaluated by the Grübler–Kutzback formula, as less than one. In this paper, a numerical algorithm is used to evaluate the degree-of-freedom of pantograph masts by obtaining the null space of a constraint Jacobian matrix. In the process redundant joints in the masts are obtained. A method based on symbolic computation, to obtain the closed-form kinematics equations of triangular and box shaped pantograph masts, is presented. In the process, the various configurations such masts can attain during deployment, are obtained. The closed-form solution also helps in identifying the redundant joints in the masts. The symbolic computations involving the Jacobian matrix also leads to a method to evaluate the global degree-of-freedom for these masts.
Resumo:
The dissertation examines aspects of asymmetrical warfare in the war-making of the German military entrepreneur Ernst von Mansfeld during his involvement in the Thirty Years War. Due to the nature of the inquiry, which combines history with military-political theory, the methodological approach of the dissertation is interdisciplinary. The theoretical framework used is that of asymmetrical warfare. The primary sources used in the dissertation are mostly political pamphlets and newsletters. Other sources include letters, documents, and contemporaneous chronicles. The secondary sources are divided into two categories, literature on the history of the Thirty Years War and textbooks covering the theory of asymmetrical warfare. The first category includes biographical works on Ernst von Mansfeld, as well as general histories of the Thirty Years War and seventeenth-century warfare. The second category combines military theory and political science. The structure of the dissertation consists of eight lead chapters, including an introduction and conclusion. The introduction covers the theoretical approach and aims of the dissertation, and provides a brief overlook of the sources and previous research on Ernst von Mansfeld and asymmetrical warfare in the Thirty Years War. The second chapter covers aspects of Mansfeld s asymmetrical warfare from the perspective of operational art. The third chapter investigates the illegal and immoral aspects of Mansfeld s war-making. The fourth chapter compares the differing methods by which Mansfeld and his enemies raised and financed their armies. The fifth chapter investigates Mansfeld s involvement in indirect warfare. The sixth chapter presents Mansfeld as an object and an agent of image and information war. The seventh chapter looks into the counter-reactions, which Mansfeld s asymmetrical warfare provoked from his enemies. The eighth chapter offers a conclusion of the findings. The dissertation argues that asymmetrical warfare presented itself in all the aforementioned areas of Mansfeld s conduct during the Thirty Years War. The operational asymmetry arose from the freedom of movement that Mansfeld enjoyed, while his enemies were constrained by the limits of positional warfare. As a non-state operator Mansfeld was also free to flout the rules of seventeenth-century warfare, which his enemies could not do with equal ease. The raising and financing of military forces was another source of asymmetry, because the nature of early seventeenth-century warfare favoured private military entrepreneurs rather than embryonic fiscal-military states. The dissertation also argues that other powers fought their own asymmetrical and indirect wars against the Habsburgs through Mansfeld s agency. Image and information were asymmetrical weapons, which were both aimed against Mansfeld and utilized by him. Finally, Mansfeld s asymmetrical threat forced the Habsburgs to adapt to his methods, which ultimately lead to the formation of a subcontracted Imperial Army under the management and leadership of Albrecht von Wallenstein. Therefore Mansfeld s asymmetrical warfare ultimately paved way for the kind of state-monopolized, organised, and symmetrical warfare that has prevailed from 1648 onwards. The conclusion is that Mansfeld s conduct in the Thirty Years War matched the criteria for asymmetrical warfare. While traditional historiography treated Mansfeld as an anomaly in the age of European state formation, his asymmetrical warfare has begun to bear resemblance to the contemporary conflicts, where nation states no longer hold the monopoly of violence.
Resumo:
The anionic surfactant dodecyl sulfate (DDS) has been intercalated in an Mg-Al layered double hydroxide (LDH). Monolayer and bilayer arrangements of the alkyl chains of the intercalated surfactant can be engineered by tuning the Al/Mg ratio of the LDH. In both arrangements the anionic headgroup of the surfactant is tethered to the LDH sheets, and consequently translational mobility of the chains is absent. The degrees of freedom of the confined alkyl chains are restricted to changes in conformation. The effects of the arrangement of the intercalated surfactant chains on conformational order and dynamics have been,investigated by spectroscopic measurements and molecular dynamics simulations. Infrared, Raman, and C-13 NMR spectroscopies were used to investigate conformation of the alkyl chains in the monolayer and bilayer arrangements and variable contact time cross-polarization magic angle spinning (VCT CPMAS) NMR measurements to probe molecular motion. The alkyl chains in the monolayer arrangement of the intercalated DDS chains showed considerably greater conformational disorder and faster dynamics as compared to chains in the bilayer arrangement, in spite of the fact that the volume available per chain in the monolayer is smaller than that in the bilayer. Atomistic MD simulations of the two arrangements of the intercalated surfactant were carried out using an isothermal-isobaric ensemble. The simulations are able to reproduce the essential results of the experiment-greater conformational disorder and faster dynamics for the alkyl chains in the monolayer arrangement of the intercalated surfactant. The MD simulations show that these results are a consequence of the fact that the nature of conformational disorder in the two arrangements is different. In the monolayer arrangement the alkyl chains can sustain isolated gauche defects, whereas in the bilayer arrangement gauche conformers occur only as part of a kink a gauche(+) trans gauche(-) sequence.
Resumo:
We present the results of molecular-dynamics simulations of systems of dumbbell molecules confined by parallel molecular walls. We have carried out systematic studies of three cases: freezing, steady flows, and stick-slip friction. We find that the molecular orientational degrees of freedom cause the surface layers to deviate from a planar configuration. Nevertheless, steady flows, in a channel as narrow as 15 molecular sizes, display continuum behavior. A range of mechanisms in the dynamics of the freezing of a confined fluid is found, as a function of the wall-fluid interactions and the bond length of the dumbbell molecules. The simple order-disorder transition associated with stick-slip motion in the presence of a layer of monoatomic lubricant molecules is supplanted by more complex behavior due to rotational degrees of freedom of the diatomic molecules.
Resumo:
Fluorene and its derivatives are well-known organic semiconducting materials in the field of opto-electronic devices because of their charge transport properties. Three new organic semiconducting materials, namely, 2,2'-((9,9-butyl-9H-fluorene-2,7-diyl)bis(4,1 phenylene))bisbenzod]thiazole, C4; 2,2'-((octyl-9H-fluorene-2,7-diyl)bis(4,1 phenylene))bisbenzod]thiazole, C8; and 2,2'-((9,9-dodecayl-9H-fluorene-2,7-diyl)bis(4,1 phenylene))bisbenzod]thiazole, C12 with a benzothiazole-fluorene backbone, were synthesized and characterized for their photophysical properties. A phenomenon of concomitant polymorphism has been investigated in the first two derivatives (C4 and C8) and has been analyzed systematically in terms of the packing characteristics involving pi ... pi interactions. The conformational flexibility of the pi-conjugated 2,2'-(fluorene-2,7-diyl)bis(4,1 phenylene)bisbenzod]thiazole backbone coupled with orientational freedom of the terminal alkyl chains were found to be the key factors responsible for these polymorphic modifications. Attempts to grow suitable crystals for single crystal X-ray diffraction of compound C12 were unsuccessful.
Resumo:
We have recently suggested a method (Pallavi Bhattacharyya and K. L. Sebastian, Physical Review E 2013, 87, 062712) for the analysis of coherence in finite-level systems that are coupled to the surroundings and used it to study the process of energy transfer in the Fenna-Matthews-Olson (FMO) complex. The method makes use of adiabatic eigenstates of the Hamiltonian, with a subsequent transformation of the Hamiltonian into a form where the terms responsible for decoherence and population relaxation could be separated out at the lowest order. Thus one can account for decoherence nonperturbatively, and a Markovian type of master equation could be used for evaluating the population relaxation. In this paper, we apply this method to a two-level system as well as to a seven-level system. Comparisons with exact numerical results show that the method works quite well and is in good agreement with numerical calculations. The technique can be applied with ease to systems with larger numbers of levels as well. We also investigate how the presence of correlations among the bath degrees of freedom of the different bacteriochlorophyll a molecules of the FMO Complex affect the rate of energy transfer. Surprisingly, in the cases that we studied, our calculations suggest that the presence of anticorrelations, in contrast to correlations, make the excitation transfer more facile.
Resumo:
Based on Navier-Stokes equations and structural and flight dynamic equations of motion, dynamic responses in vertical discrete gust flow perturbation are investigated for a supersonic transport model. A tightly coupled method was developed by subiterations between aerodynamic equations and dynamic equations of motion. First, under the assumption of rigid-body and single freedom of motion in the vertical plunging, the results of a direct-coupling method are compared with the results of quasi-steady model method. Then, gust responses for the one-minus-cosine gust profile arc analyzed with two freedoms of motion in plunging and pitching for the airplane configurations with and without the consideration of structural deformation.
Resumo:
Resumen: El autor enfatiza la calidad moral del mundo de los negocios; destacando la importancia del reconocimiento de la vocación cristiana del empresario que lo dignifica y le impone obligaciones. Luego explica las ideas que considera claves en el documento: la afirmación de que el líder de negocios tiene un llamado divino para administrar los recursos y que es además un agente de la justicia. A continuación, sostiene que el líder debe respetar la dignidad humana y el bien común, para lo cual debe seguir seis principios rectores. Finalmente, destaca la parte final del documento, “Examen de conciencia”, como el aporte más valioso, puesto que invita a los líderes empresariales a llevar a la práctica laboral su vocación cristiana
Resumo:
This dissertation is concerned with the problem of determining the dynamic characteristics of complicated engineering systems and structures from the measurements made during dynamic tests or natural excitations. Particular attention is given to the identification and modeling of the behavior of structural dynamic systems in the nonlinear hysteretic response regime. Once a model for the system has been identified, it is intended to use this model to assess the condition of the system and to predict the response to future excitations.
A new identification methodology based upon a generalization of the method of modal identification for multi-degree-of-freedom dynaimcal systems subjected to base motion is developed. The situation considered herein is that in which only the base input and the response of a small number of degrees-of-freedom of the system are measured. In this method, called the generalized modal identification method, the response is separated into "modes" which are analogous to those of a linear system. Both parametric and nonparametric models can be employed to extract the unknown nature, hysteretic or nonhysteretic, of the generalized restoring force for each mode.
In this study, a simple four-term nonparametric model is used first to provide a nonhysteretic estimate of the nonlinear stiffness and energy dissipation behavior. To extract the hysteretic nature of nonlinear systems, a two-parameter distributed element model is then employed. This model exploits the results of the nonparametric identification as an initial estimate for the model parameters. This approach greatly improves the convergence of the subsequent optimization process.
The capability of the new method is verified using simulated response data from a three-degree-of-freedom system. The new method is also applied to the analysis of response data obtained from the U.S.-Japan cooperative pseudo-dynamic test of a full-scale six-story steel-frame structure.
The new system identification method described has been found to be both accurate and computationally efficient. It is believed that it will provide a useful tool for the analysis of structural response data.
Resumo:
While some of the deepest results in nature are those that give explicit bounds between important physical quantities, some of the most intriguing and celebrated of such bounds come from fields where there is still a great deal of disagreement and confusion regarding even the most fundamental aspects of the theories. For example, in quantum mechanics, there is still no complete consensus as to whether the limitations associated with Heisenberg's Uncertainty Principle derive from an inherent randomness in physics, or rather from limitations in the measurement process itself, resulting from phenomena like back action. Likewise, the second law of thermodynamics makes a statement regarding the increase in entropy of closed systems, yet the theory itself has neither a universally-accepted definition of equilibrium, nor an adequate explanation of how a system with underlying microscopically Hamiltonian dynamics (reversible) settles into a fixed distribution.
Motivated by these physical theories, and perhaps their inconsistencies, in this thesis we use dynamical systems theory to investigate how the very simplest of systems, even with no physical constraints, are characterized by bounds that give limits to the ability to make measurements on them. Using an existing interpretation, we start by examining how dissipative systems can be viewed as high-dimensional lossless systems, and how taking this view necessarily implies the existence of a noise process that results from the uncertainty in the initial system state. This fluctuation-dissipation result plays a central role in a measurement model that we examine, in particular describing how noise is inevitably injected into a system during a measurement, noise that can be viewed as originating either from the randomness of the many degrees of freedom of the measurement device, or of the environment. This noise constitutes one component of measurement back action, and ultimately imposes limits on measurement uncertainty. Depending on the assumptions we make about active devices, and their limitations, this back action can be offset to varying degrees via control. It turns out that using active devices to reduce measurement back action leads to estimation problems that have non-zero uncertainty lower bounds, the most interesting of which arise when the observed system is lossless. One such lower bound, a main contribution of this work, can be viewed as a classical version of a Heisenberg uncertainty relation between the system's position and momentum. We finally also revisit the murky question of how macroscopic dissipation appears from lossless dynamics, and propose alternative approaches for framing the question using existing systematic methods of model reduction.