The institutional environment and its influence on political options to Protect Winnipeg’s Female garments Workers against the impact of globalization

The principal objective of this paper is to identify the relationship between the re­sults of the Canadian policies implemented to protect female workers against the impact of globalization on the garment industry and the institutional setting in which this labour market is immersed in Winnipeg. This research paper begins with a brief summary of the institutional theory appro­ach that sheds light on the analysis of the effects of institutions on the policy options to protect female workers of the Winnipeg garment industry. Next, this paper identi­fies the set of beliefs, formal procedures, routines, norms and conventions that cha­racterize the institutional environment of the female workers of Winnipeg’s garment industry. Subsequently, this paper descri­bes the impact of free trade policies on the garment industry of Winnipeg. Afterward, this paper presents an analysis of the ba­rriers that the institutional features of the garment sector in Winnipeg can set to the successful achievement of policy options addressed to protect the female workforce of this sector. Three policy options are considered: ethical purchasing; training/retraining programs and social engage­ment support for garment workers; and protection of migrated workers through promoting and facilitating bonds between Canada’s trade unions and trade unions of the labour sending countries. Finally, this paper concludes that the formation of isolated cultural groups inside of factories; the belief that there is gender and race discrimination on the part of the garment industry management against workers; the powerless social conditions of immi­grant women; the economic rationality of garment factories’ managers; and the lack of political will on the part of Canada and the labour sending countries to set effective bilateral agreements to protect migrate wor­kers, are the principal barriers that divide the actors involved in the garment industry in Winnipeg. This division among the prin­cipal actors of Winnipeg’s garment industry impedes the change toward more efficient institutions and, hence, the successful achievement of policy options addressed to protect women workers. 

Iglesias pentecostales: ¿empresas de la fe?

Este trabajo de investigación tiene como objetivo principal relatar la manera en que operan las iglesias pentecostales o conocidas popularmente en Colombia como cristianas y que tienen su sede principal en la ciudad de Bogotá. Para este fin se realizaron numerosas entrevistas a varios personajes que pertenecen a estas congregaciones y que se encargaron de contar cómo se crearon, de dónde viene el dinero que solventa sus necesidades, los gastos que tienen mensualmente y además, dieron detalles que permitirán al lector conocer de cerca las diferencias entre una iglesia pequeña, una mediana y una de gran tamaño. La voz de un experto y estudioso del fenómeno religioso en Colombia también está presente en este texto que además cuestiona de manera implícita el proceso de regulación que el Ministerio de Interior y las autoridades ejercen sobre estos lugares.

Vivienda obrera en Bilbao y el Bajo Nervión: las casas baratas, una nueva forma de alojamiento (1911-1936)

A finales del siglo XIX y principios del siglo XX la provincia de Vizcaya despuntó en el contexto internacional como importe centro extractor de mineral de hierro y como relevante foco productor siderometalúrgico. Las explotaciones mineras se adueñaron de los Montes de Triano y las fábricas conquistaron las márgenes del Río Nervión, arrastrando tras de sí una densa marea humana. Alojar a esa población se convirtió en una cuestión de primer orden. Paralelamente, las instituciones estatales desbordadas por problemas similares en otros puntos de la geografía española, idearon y pusieron en práctica un complejo engranaje administrativo para erigir las primeras viviendas sociales. Así, las denominadas Casas Baratas fueron la respuesta oficial a la insuficiencia de vivienda obrera y Vizcaya fue una de las provincias donde mayor desarrollo tuvieron este tipo de propuestas constructivas. De este modo, la presente investigación comienza indagando sobre el origen de la problemática en Bilbao y la Cuenca del Bajo Nervión, para después repasar las medidas adoptadas por el Estado y la Diputación de Vizcaya en esta materia. Hecho esto, se da paso a un concienzudo repaso de las características principales de la edificación de Casas Baratas en toda la provincia de Vizcaya, descendiendo, posteriormente, a la realidad de Bilbao, Baracaldo, Sestao, Portugalete, Guecho y Erandio, haciendo hincapié en las inquietudes locales. El estudio finaliza con un ejercicio comparativo con las Casas Baratas de Barcelona, Sabadell y Tarrasa, estableciéndose similitudes y divergencias con el foco industrial más importante del momento en el panorama nacional.

Comportamento de compra face à obsolescência planificada

No século XXI as fábricas produzem mais do que necessário, os fabricantes competem entre eles pelo mercado de consumo e são pressionados para vender. Para não ficarem com produtos em stock, recorrem a diversas técnicas de marketing, entre elas a inserção de obsolescência planificada nos seus produtos no ato da criação. A presente dissertação pretende estudar o comportamento de compra face à obsolescência planificada. O conceito de obsolescência planificada divide-se em três (3) tipologias: tecnológica, por qualidade, e psicológica. Quando um modelo mais recente do mesmo produto é colocado no mercado, este pode ser colocado com base em inovações tecnológicas reais ou melhoramentos superficiais fictícios. Em ambos os casos é considerado obsolescência tecnológica. Se um produto avaria antes do tempo ou é utilizada matéria-prima de qualidade inferior ou defeituosa, o fabricante introduziu obsolescência por qualidade no produto. Por fim, existe a obsolescência psicológica. Neste caso o problema não é do produto, pois continua funcional, mas sim do consumidor. Este está psicologicamente cansado do produto e opta pela sua substituição. O que se pretende estudar é o comportamento humano adotado face ao conceito. Terá a sociedade consumidora conhecimento deste assunto tabu? Este e outros fatores serão questionados e estudados nos capítulos seguintes.

Auge y decadencia de la fábrica de hilados y tejidos de algodón La Industrial, 1935-1999 (Estudios)

Este artículo presenta una aproximación general al mundo obrero de Quito, tomando como estudio de caso una de las fábricas de textiles e hilados de la ciudad, entre los años treinta y noventa del siglo XX. El autor presenta, en primer lugar, una descripción sobre la industria en la ciudad, para centrar, luego, su atención en la Fábrica La Industrial, su producción textil, ambiente de trabajo y dinámicas internas, la vida de los obreros, su organización sindical y relaciones con los propietarios de la fábrica. Las fuentes que alimentan el análisis son documentación proveniente de los acervos administrativos de la fábrica, litigios, notas de prensa relacionadas con las protestas y movilizaciones sociales de los trabajadores en reivindicación de sus demandas salariales y laborales, así como testimonios de exobreros de La Industrial.

Large-scale functional expression of WT and truncated human adenosine A(2A) receptor in Pichia pastoris bioreactor cultures

Background: The large-scale production of G-protein coupled receptors (GPCRs) for functional and structural studies remains a challenge. Recent successes have been made in the expression of a range of GPCRs using Pichia pastoris as an expression host. P. pastoris has a number of advantages over other expression systems including ability to post-translationally modify expressed proteins, relative low cost for production and ability to grow to very high cell densities. Several previous studies have described the expression of GPCRs in P. pastoris using shaker flasks, which allow culturing of small volumes (500 ml) with moderate cell densities (OD600 similar to 15). The use of bioreactors, which allow straightforward culturing of large volumes, together with optimal control of growth parameters including pH and dissolved oxygen to maximise cell densities and expression of the target receptors, are an attractive alternative. The aim of this study was to compare the levels of expression of the human Adenosine 2A receptor (A(2A)R) in P. pastoris under control of a methanol-inducible promoter in both flask and bioreactor cultures. Results: Bioreactor cultures yielded an approximately five times increase in cell density (OD600 similar to 75) compared to flask cultures prior to induction and a doubling in functional expression level per mg of membrane protein, representing a significant optimisation. Furthermore, analysis of a C-terminally truncated A2AR, terminating at residue V334 yielded the highest levels (200 pmol/mg) so far reported for expression of this receptor in P. pastoris. This truncated form of the receptor was also revealed to be resistant to C-terminal degradation in contrast to the WT A(2A)R, and therefore more suitable for further functional and structural studies. Conclusion: Large-scale expression of the A(2A)R in P. pastoris bioreactor cultures results in significant increases in functional expression compared to traditional flask cultures.

Influence of fermentation conditions on the surface properties and adhesion of Lactobacillus rhamnosus GG

Background: The surface properties of probiotic bacteria influence to a large extent their interactions within the gut ecosystem. There is limited amount of information on the effect of the production process on the surface properties of probiotic lactobacilli in relation to the mechanisms of their adhesion to the gastrointestinal mucosa. The aim of this work was to investigate the effect of the fermentation pH and temperature on the surface properties and adhesion ability to Caco-2 cells of the probiotic strain Lactobacillus rhamnosus GG. Results: The cells were grown at pH 5, 5.5, 6 (temperature 37 °C) and at pH 6.5 (temperature 25 °C, 30 °C and 37 °C), and their surfaces analysed by X-ray photoelectron spectrometry (XPS), Fourier transform infrared spectroscopy (FT-IR) and gel-based proteomics. The results indicated that for all the fermentation conditions, with the exception of pH 5, a higher nitrogen to carbon ratio and a lower phosphate content was observed at the surface of the bacteria, which resulted in a lower surface hydrophobicity and reduced adhesion levels to Caco-2 cells as compared to the control fermentation (pH 6.5, 37 oC). A number of adhesive proteins, which have been suggested in previous published works to take part in the adhesion of bacteria to the human gastrointestinal tract, were identified by proteomic analysis, with no significant differences between samples however. Conclusions: The temperature and the pH of the fermentation influenced the surface composition, hydrophobicity and the levels of adhesion of L. rhamnosus GG to Caco-2 cells. It was deduced from the data that a protein rich surface reduced the adhesion ability of the cells.

A Guide to Office Clerical Time Standards

A Guide to Office Clerical Time Standards is an instructional performance piece based on a corporate manual from 1960. The pamphlet is focused on the time necessary for the accomplishment of minute labour procedures in the office, from the depressing and releasing of typewriter keys to the opening and closing of filing cabinet drawers. In the performance, seven costumed performers represent the different levels of management and employment while performing the actions described in the guide, accompanied by a live musical score. There has been much discussion of the changes to work in the west following the decline of post-Fordist service sector jobs. These increasingly emphasise the specificity of employees’ knowledge and cognitive skill. However, this greater flexibility and creativity at work has been accompanied by an opposite trajectory. The proletarisation of white collar work has given rise to more bureaucracy, target assessment and control for workers in previously looser creative professions, from academia to the arts. The midcentury office is the meeting point of these cultures, where the assembly line efficiency management of the factory meets the quantifying control of the knowledge economy. A Guide to Office Clerical Time Standards explores the survival of one regime into its successor following the lines of combined and uneven development that have turned the emancipatory promise of immaterial labour into the perma-temp hell of the cognitariat. The movement is accompanied by a score of guitar, bass and drums, the componenets of the rock ‘n’ roll music that rose from the car factories of the motor city and the cotton fields of the southern states to represent the same junction of expression and control.

How the double spherules of infectious bronchitis virus impact our understanding of RNA virus replicative organelles

Powered by advances in electron tomography, recent studies have extended our understanding of how viruses construct "replication factories" inside infected cells. Their function, however, remains an area of speculation with important implications for human health. It is clear from these studies that whatever their purpose, organelle structure is dynamic (M. Ulasli, M. H. Verheije, C. A. de Haan, and F. Reggiori, Cell. Microbiol. 12:844-861, 2010) and intricate (K. Knoops, M. Kikkert, S. H. Worm, J. C. Zevenhoven-Dobbe, Y. van der Meer, et al., PLOS Biol. 6:e226, 2008). But by concentrating on medically important viruses, these studies have failed to take advantage of the genetic variation inherent in a family of viruses that is as diverse as the archaea, bacteria, and eukaryotes combined (C. Lauber, J. J. Goeman, M. del Carmen Parquet, P. T. Nga, E. J. Snijder, et al., PLOS Pathog. 9:e1003500, 2013). In this climate, Maier et al. (H. J. Maier, P. C. Hawes, E. M. Cottam, J. Mantell, P. Verkade, et al., mBio 4:e00801-13, 2013) explored the replicative structures formed by an avian coronavirus that appears to have diverged at an early point in coronavirus evolution and shed light on controversial aspects of viral biology.

Does form meet function in the coronavirus replicative organelle?

If we use the analogy of a virus as a living entity, then the replicative organelle is the body where its metabolic and reproductive activities are concentrated. Recent studies have illuminated the intricately complex replicative organelles of coronaviruses, a group that includes the largest known RNA virus genomes. This review takes a virus-centric look at the coronavirus replication transcription complex organelle in the context of the wider world of positive sense RNA viruses, examining how the mechanisms of protein expression and function act to produce the factories that power the viral replication cycle.

Dual drive series actuator

Industrial robotic manipulators can be found in most factories today. Their tasks are accomplished through actively moving, placing and assembling parts. This movement is facilitated by actuators that apply a torque in response to a command signal. The presence of friction and possibly backlash have instigated the development of sophisticated compensation and control methods in order to achieve the desired performance may that be accurate motion tracking, fast movement or in fact contact with the environment. This thesis presents a dual drive actuator design that is capable of physically linearising friction and hence eliminating the need for complex compensation algorithms. A number of mathematical models are derived that allow for the simulation of the actuator dynamics. The actuator may be constructed using geared dc motors, in which case the benefits of torque magnification is retained whilst the increased non-linear friction effects are also linearised. An additional benefit of the actuator is the high quality, low latency output position signal provided by the differencing of the two drive positions. Due to this and the linearised nature of friction, the actuator is well suited for low velocity, stop-start applications, micro-manipulation and even in hard-contact tasks. There are, however, disadvantages to its design. When idle, the device uses power whilst many other, single drive actuators do not. Also the complexity of the models mean that parameterisation is difficult. Management of start-up conditions still pose a challenge.

Separation and Execution of graphical engine on a cross platform IDE to enhance performance

“Biosim” is a simulation software which works to simulate the harvesting system.This system is able to design a model for any logistic problem with the combination of several objects so that the artificial system can show the performance of an individual model. The system will also describe the efficiency, possibility to be chosen for real life application of that particular model. So, when any one wish to setup a logistic model like- harvesting system, in real life he/she may be noticed about the suitable prostitution for his plants and factories as well as he/she may get information about the least number of objects, total time to complete the task, total investment required for his model, total amount of noise produced for his establishment in advance. It will produce an advance over view for his model. But “Biosim” is quite slow .As it is an object based system, it takes long time to make its decision. Here the main task is to modify the system so that it can work faster than the previous. So, the main objective of this thesis is to reduce the load of “Biosim” by making some modification of the original system as well as to increase its efficiency. So that the whole system will be faster than the previous one and performs more efficiently when it will be applied in real life. Theconcept is to separate the execution part of ”Biosim” form its graphical engine and run this separated portion in a third generation language platform. C++ is chosenhere as this external platform. After completing the proposed system, results with different models have been observed. The results show that, for any type of plants of fields, for any number of trucks, the proposed system is faster than the original system. The proposed system takes at least 15% less time “Biosim”. The efficiency increase with the complexity of than the original the model. More complex the model, more efficient the proposed system is than original “Biosim”.Depending on the complexity of a model, the proposed system can be 56.53 % faster than the original “Biosim”.

Arbetsorganisation i träbränslefabriker

The objective of this study has been to describe and analyse existing forms of organisation in wood fuel plants regarding work tasks, organisational structure, work content, skill demands, crew recruitment, working hours and wage conditions. The study has been introductory, con¬sisting of 2-3 hour visits to 12 plants.The production of refined wood fuels is carried out in rather small plants. The number of employees ranges from 6 to 15 persons in the factories producing between 20 and 100 thousand tons per year. Generally one shift crew consists of only two persons. The operator job requires multiskill capacity, dexterity and autonomous problem-solving.The job can be considered as qualified, responsible, autonomous, meaningful and variable. It was generally considered that it takes about a year to become a good operator. And even after that, one is still learning. Negative factors are shift work, partly poor physical working environment (dust and noise) and, occasionally, mental pressure and overtime.Modern organisation concepts are, to a large extent, applied in the wood fuel plants. The organisation is flat, lean and customer-oriented.

Globalisation and manufacturing strategy in the TCF industry

Purpose – The textiles, clothing, and footwear (TCF) industry has struggled in Australia since the government commenced dismantling tariffs. By sourcing from Asia, middlemen undercut established suppliers, and retail chains set benchmark low prices with their imported “house” labels. The policy-makers predicted that local producers would become more efficient, and export to make up for lost sales, but the media paints a picture of rising imports, retrenchments, and factory closures. The research objective was to discover what strategies the survivors (actually) employ in adapting to the pressures of globalisation.

Design/methodology/approach – More than 30 companies were involved in the study, ranging from small family businesses to subsidiaries of big multinationals. Each case study was based on an interview with a senior executive, normally followed by a plant tour. This methodology suits a fresh topic, as it avoids preconceptions and imposes no bounds.

Findings – Results show that the policy change was based on “pie in the sky” forecasts. Increasingly, TCF production is transferred to cheap offshore locations, generally via subcontracting plus the “badging” of foreign designs. To survive, local factories should focus on quality and customer service, preferably in niche markets (like uniforms), or for specific customer groups, and develop technologically advanced products. A move down the supply chain into retailing can also assist. Large multinational corporations that engage in foreign direct investment dominate the management literature.

Originality/value – This paper presents a different perspective, neglected in international operations management, whereby domestically oriented businesses attempt to defend themselves against the adverse consequences of globalisation.