Novel technology for preparation of optically active chemicals

Asymmetric synthesis using modified heterogeneous catalysts has gained lots of interest in the production of optically pure chemicals, such as pharmaceuticals, nutraceuticals, fragrances and agrochemicals. Heterogeneous modified catalysts capable of inducing high enantioselectivities are preferred in industrial scale due to their superior separation and handling properties. The topic has been intensively investigated both in industry and academia. The enantioselective hydrogenation of ethyl benzoylformate (EBF) to (R)-ethyl mandelate over (-)-cinchonidine (CD)-modified Pt/Al2O3 catalyst in a laboratory-scale semi-batch reactor was studied as a function of modifier concentration, reaction temperature, stirring rate and catalyst particle size. The main product was always (R)-ethyl mandelate while small amounts of (S)-ethyl mandelate were obtained as by product. The kinetic results showed higher enantioselectivity and lower initial rates approaching asymptotically to a constant value as the amount of modifier was increased. Additionally, catalyst deactivation due to presence of impurities in the feed was prominent in some cases; therefore activated carbon was used as a cleaning agent of the raw material to remove impurities prior to catalyst addition. Detailed characterizations methods (SEM, EDX, TPR, BET, chemisorption, particle size distribution) of the catalysts were carried out. Solvent effects were also studied in the semi-batch reactor. Solvents with dielectric constant (e) between 2 and 25 were applied. The enantiomeric excess (ee) increased with an increase of the dielectric coefficient up to a maximum followed by a nonlinear decrease. A kinetic model was proposed for the enantioselectivity dependence on the dielectric constant based on the Kirkwood treatment. The non-linear dependence of ee on (e) successfully described the variation of ee in different solvents. Systematic kinetic experiments were carried out in the semi-batch reactor. Toluene was used as a solvent. Based on these results, a kinetic model based on the assumption of different number of sites was developed. Density functional theory calculations were applied to study the energetics of the EBF adsorption on pure Pt(1 1 1). The hydrogenation rate constants were determined along with the adsorption parameters by non-linear regression analysis. A comparison between the model and the experimental data revealed a very good correspondence. Transient experiments in a fixed-bed reactor were also carried out in this work. The results demonstrated that continuous enantioselective hydrogenation of EBF in hexane/2-propanol 90/10 (v/v) is possible and that continuous feeding of (-)-cinchonidine is needed to maintain a high steady-state enantioselectivity. The catalyst showed a good stability and high enantioselectivity was achieved in the fixed-bed reactor. Chromatographic separation of (R)- and (S)-ethyl mandelate originating from the continuous reactor was investigated. A commercial column filled with a chiral resin was chosen as a perspective preparative-scale adsorbent. Since the adsorption equilibrium isotherms were linear within the entire investigated range of concentrations, they were determined by pulse experiments for the isomers present in a post-reaction mixture. Breakthrough curves were measured and described successfully by the dispersive plug flow model with a linear driving force approximation. The focus of this research project was the development of a new integrated production concept of optically active chemicals by combining heterogeneous catalysis and chromatographic separation technology. The proposed work is fundamental research in advanced process technology aiming to improve efficiency and enable clean and environmentally benign production of enantiomeric pure chemicals.

Lipase and omega-transaminase catalysis in preparation of alcohol and amine enantiomers

Enantiopure intermediates are of high value in drug synthesis. Biocatalysis alone or combined with chemical synthesis provides powerful tools to access enantiopure compounds. In biocatalysis, chemo-, regio- and enantioselectivity of enzymes are combined with their inherent environmentally benign nature. Enzymes can be applied in versatile chemical reactions with non-natural substrates under synthesis conditions. Immobilization of an enzyme is a crucial part of an efficient biocatalytic synthesis method. Successful immobilization enhances the catalytic performance of an enzyme and enables its reuse in successive reactions. This thesis demonstrates the feasibility of biocatalysis in the preparation of enantiopure secondary alcohols and primary amines. Viability and synthetic usability of the studied biocatalytic methods have been addressed throughout this thesis. Candida antarctica lipase B (CAL-B) catalyzed enantioselective O-acylation of racemic secondary alcohols was successfully incorporated with in situ racemization in the dynamic kinetic resolution, affording the (R)-esters in high yields and enantiopurities. Side reactions causing decrease in yield and enantiopurity were suppressed. CAL-B was also utilized in the solvent-free kinetic resolution of racemic primary amines. This method produced the enantiomers as (R)-amides and (S)-amines under ambient conditions. An in-house sol-gel entrapment increased the reusability of CAL-B. Arthrobacter sp. omega-transaminase was entrapped in sol-gel matrices to obtain a reusable catalyst for the preparation enantiopure primary amines in an aqueous medium. The obtained heterogeneous omega-transaminase catalyst enabled the enantiomeric enrichment of the racemic amines to their (S)-enantiomers. The synthetic usability of the sol-gel catalyst was demonstrated in five successive preparative kinetic resolutions.

Studies in selectivity of lipases in preparation of cyanohydrins, sugar conjugates and secondary alcohols

Biocatalysis can be applied in organic synthetic chemistry to counter challenges posed by increased demands towards chemo-, regio- and stereoselectivity, not forgetting the need for greener chemistry. During the last 30 years, biocatalysis with the use of enzymes as chiral catalysts has become more common in chemistry laboratories and industrial processes. In this thesis, the use of lipases as versatile biocatalysts in the acylation of alcohols is examined both in the light of literature examples and four original publications. In the first part of the work presented in this thesis lipases were utilized in two examples concerning secondary alcohols. First, the kinetic resolution of heterocyclic aromatic secondary alcohols through transesterification was thoroughly examined including the studies of competing hydrolysis and esterification reactions. In another example, lipases were utilized in the formation of a dynamic systemic resolution (DSR) process which in turn was used as a developmental tool in the optimization of the dynamic kinetic resolution (DKR) of five heterocyclic aromatic cyanohydrins in one pot for the preparation of cyanohydrin esters as single enantiomers. In the second part of the work, the regio- and stereoselectivity of lipases was used to form sugar conjugates of glyceric and β-amino acids. The primary hydroxyl groups of methyl α-D-galacto-, -gluco- and -mannopyranosides were now acylated trough lipasecatalyzed transesterification and enantioselective lipase-catalyzed ring-opening of β- lactams, respectively.

Design and synthesis of new monoterpenoid derived ligands for asymmetric catalysis /

The work to be presented herein illustrates several important facts. First, the synthesis of BIBOL (19), a 1,4-diol derived from the monoterpene camphor has allowed us to demonstrate that oxidative dimerizations of enolates can, and do proceed with nearly complete diastereoselectivity under kinetically controlled conditions. The yield of BIBOL is now 50% on average, with a 10% yield of a second diastereomer, which is likely the result of a non-kinetic hydride reduction, thereby affording the epimeric alcohol, 20, coupled on the exo face of camphor. This implies the production of 60% of a single coupling diastereomer. No other diastereomers from the reduction were observed. The utility of BEBOL has been illustrated in early asymmetric additions of diethylzinc to aryl aldehydes, with e.e.'s as high as 25-30%. '^' To further the oxidative coupling work, the same methodology which gave rise to BIBOL was applied to the chiral pool ketone, menthone. Interestingly, this gave an excellent yield of the a-halohydrin (31), which is the result of a chlorination of menthone. This result clearly indicates the high stereoselectivity of the process regardless of the outcome, and has illustrated an interesting dichotomy between camphor and menthone. The utility of the chlorination product as a precursor other chiral ligands is currently being investigated. > ' Finally, a new series of 1,3-diols as well as a new aminoalcohol have successfully been synthesized from highly diastereoselective aldol/mannich reactions. Early studies have indicated their potential in asymmetric catalysis, while employing pi-stack interactions as a means of controlling enantioselective aldol reactions.

Synthesis of chiral homoallylic alcohols and phthalans through the asymmetric allylation of carbonyl compounds /

The implementation of chiral centres within biologically active compounds has been a perplexing yet motivational force in chemistry. This work presents the attempted formation of a concurrent or sequential tandem catalyzed methodology of enantioselective nucleophilic addition and electrophilic cyclization. The 2'- arylalkynyl- aldehyde, ketone, and imine substrates used within were adeptly chosen with a dually activated structure; 1) for nucleophilic addition to the electrophilic substituents; and 2) for carbophilic activation of the alkyne substituent to undergo cyclization. To accomplish the nucleophilic addition, two distinct allylation methodologies were pursued: (/?)-BINOL catalyzed-allylboration and (5)- BINAP-AgF catalyzed-allylsilylation. BINAP catalyzed enantioselective allylation of 2'-arylalkynyl-aldehydes, to form chiral homoallylic alcohols, was successful. Homoallylic alcohols were isolated with high enantio-purity (>80%), which then underwent sequential cyclization to form chiral allylic phthalans, in moderate yields. An application of this methodology towards the construction of biologically active compounds was included with the partial synthesis of the natural product and H. pylori inhibitor, (+)-Spirolaxine methyl ether.

Synthesis of Chiral Benzimidazolylidenes from 1,10-Phenathrolines and 1,10-Phenathroline-2,9-dione /

A^-heterocyclic carbenes (NHCs) have become the focus of much interest as ancillary ligands for transition metal catalysts in recent years. Their structural variability and strong cy-donation properties have led to the preparation of demonstrably useful organometallic catalysts. Among the three general structural types of NHCs (imidazolylidenes, imidazolinylidenes, and benzimidazolylidenes), benzimidazolylidenes are the least investigated because of the limitation of current synthetic approaches. The preparation of chiral analogues is even more challenging. Previously, our group has demonstrated an alternative approach to synthesizing benzimidazolylidenes with a tetracyclic framework in three steps from 1,10-phenanthroline. This thesis is focused on approaches to chiral benzimidazolylidenes derived from substituted 1,10-phenanthrolines. A key step in the preparation of these ligands involves a reduction of the pyridyl rings in 1,10-phenanthrolines. Chirality can be introduced to phenanthrolines before, during, or after the reduction as illustrated by three approaches: 1) de novo construction of the phenanthroline from chiral ketones with endo and exo faces to provide a degree of diastereoselectivity during subsequent reduction; 2) introduction of substituents into the 2- and 2,9- position of phenanthroline by nucleophilic aromatic substitution, followed by a reduction-resolution sequence; and 3) use of the protected octahydrophenanthroline as a substrate for chiral induction a to nitrogen.

Modifications to the Suzuki reaction and mechanistic insights on the NBS mediated cleavage of benzylidene acetals /

One of the most challenging tasks for a synthetic organic chemist today, is the development of chemo, regio, and stereoselective methodologies toward the total synthesis of macromolecules. r . The objective of my thesis was to develop methodologies towards this end. The first part of my project was to develop highly functionalized chirons from D-glucose, a cheap, chiral starting material, to be utilized in this capacity. The second part of the project dealt with modifying the carbon-carbon bond forming Suzuki reaction, which is utilized quite often as a means of combining molecular sub units in total synthesis applications. As previously stated the first area of the project was to develop high value chirons from D-glucose, but the mechanism of their formation was also investigated. The free radical initiated oxidative fragmentation of benzylidene acetals was investigated through the use of several test-case substrates in order to unravel the possible mechanistic pathways. This was performed by reacting the different acetals with N-bromosuccinimide and benzoyl peroxide in chlorobenzene at 70^C in all cases. Of the three mechanistic pathways discussed in the literature, it was determined, from the various reaction products obtained, that the fragmentation of the initial benzylic radical does not occur spontaneously but rather, oxidation proceeds to give the benzyl bromide, which then fragments via a polar pathway. It was also discovered that the regioselectivity of the fragmentation step could be altered through incorporation of an allylic system into the benzylidene acetal. This allows for the acquisition of a new set of densely functionalized. chiral, valuable synthetic intermediates in only a few steps and in high yields from a-Dglucose. The second part of the project was the utilization of the phosphonium salt room temperature ionic liquid tetradecyltrihexylphosphonium chloride (THPC) as an efficient reusable medium for the palladium catalyzed Suzuki cross-coupling reaction of aryl halides, including aryl chlorides, under mild conditions. The cross-coupling reactions were found to proceed in THPC containing small amounts of water and toluene using potassium phosphate and 1% Pd2(dba)3. Variously substituted iodobenzenes, including electron rich derivatives, reacted efficiently in THPC with a variety of arylboronic acids and afforded complete conversion within 1 hour at 50 ^C. The corresponding aryl bromides also reacted under these conditions with the addition of a catalytic amount of triphenylphosphine that allowed for complete conversion and high isolated yields. The reactions involving aryl chlorides were considerably slower, although the addition of triphenylphosphine and heating at 70 ^C allowed high conversion of electron deficient derivatives. Addition of water and hexane to the reaction products results in a triphasic system in which the top hexane phase contained the biaryl products, the palladium catalyst remained fully dissolved in the central THPC layer, while the inorganic salts were extracted into the lower aqueous phase. The catalyst was then recycled by removing the top and bottom layers and adding the reagents to the ionic liquid which was heated again at 50 ^C; resulting in complete turnover of iodobenzene. Repetition of this procedure gave the biphenyl product in 82-97% yield (repeated five times) for both the initial and recycled reaction sequences.

Asymmetric cyclopropanation via catalysts incorporating the 1,4-diol ligands and the newly designed dioxaborolane /

The development of new methodology for the asymmetric synthesis of chiral organic compounds is a major focus in modem organic chemistry. The use of chiral catalysts is replacing chiral auxiliaries as a new tool for synthetic chemists. An efficient chiral catalyst allows for large quantities of optically active product to be obtained on use of relatively small amount of enantiopure material, without the need for the removal and recovery of a chiral auxiliary. Furthermore, the most practical catalytic methods utilize an inexpensive and readily available chiral ligand that can provide high and predictable enantioselectivity across a wide range of substrates. In our project, two type of versatile, upgraded chiral ligands have been designed and synthesized. Their application in Simmons-Smith type cyclopropanation is investigated, and the pleasing results suggest that they are the potential catalytic enantioselective candidates to build C-C bonds.

Enantiodivergent chemoenzymatic synthesis of Balanol and approaches to the synthesis of (+)-Codine

The present thesis reviews the development of a formal enantiodivergent synthesis of the (+)- and (-)-isomers of balanol. This approach commences from a cis-dihydrodiol derived from the enzymatic dihydroxylation of bromobenzene. The stereochemistry of the diol is used to direct the synthesis of two different aziridines, each used in the formal synthesis of one enantiomer of balanol. Also described are several enantioselective approaches to (+ )-codeine. Each strategy begins with the enzymatic dihydroxylation of p-bromoethylbenzene and involves a Mitsunobu inversion and intramolecular Heck reaction as key steps.

Stereoselective synthesis of substituted hexahydro-3a,4a-diazacyclopentaphenanthren-4-ones and aminoferrocenes

This thesis explored the development of several methodologies for the stereoselective construction of ligand frameworks and some of their applications. The first segment concerns the application of an enantioselective lithiation at an Sp3_ hybridized position adjacent to nitrogen by means of the widely used and typically highly effective enantioselective lithiation with ( -)-sparteine. This investigation was intended to develop a method to install chirality into a system that would be converted into a family of diaminoylidenes for use as phosphine mimics in transition metal catalysis or as nucleophilic reagents. Molecular modeling of the system revealed some key interactions between the substrate and (-)-sparteine that provided general insight into the diamine's mode of action and should lend some predictive value to its future applications. The second portion focuses on the development of methods to access 1,2- disubstituted aminoferrocenes, an underexplored class of metallocenes possessing planar chirality. Two routes were examined involving a diastereoselective and an enantioselective pathway, where the latter method made use of the first BF3-mediated lithiation-substitution to install planar chirality. Key derivatives such as 1,2- aminophosphines, made readily accessible by the new route, were evaluated as ligands for Pd(II), Pt(II) and Ir(I). These complexes show activity in a number of transformations with both achiral and prochiral substrates. Optimization experiments were conducted to prepare enantiomerically enriched 2-substituted-I-aminoferrocenes by direct asymmetric lithiation of BF3-coordinated tertiary aminoferrocenes. A predictive computational model describing the transition state of this reaction was developed in collaboration with Professor Travis Dudding's group (Department of Chemistry, Brock University). The predicted stereochemistry of the process was confirmed by single-crystal X-ray analysis of a 2-phosphino-l-dimethylaminoferrocene derivative. Enantiomerically pure samples of the aminophosphine ligands derived from this new process have given promising preliminary results in the enantioselective hydrogenation of prochiral alkenes and warrant further stUdy in metal-mediated catalysis.

Experimental and Computational Studies on Copper and Hydrobenzoin Derivatives in Catalytic Asymmetric Reactions

The use of theory to understand and facilitate catalytic enantioselective organic transformations involving copper and hydrobenzoin derivatives is reported. Section A details the use of theory to predict, facilitate, and understand a copper promoted amino oxygenation reaction reported by Chemler et al. Using Density Functional Theory (DFT), employing the hybrid B3LYP functional and a LanL2DZ/6-31G(d) basis set, the mechanistic details were studied on a N-tosyl-o-allylaniline and a [alpha]-methyl-[gamma]-alkenyl sulfonamide substrate. The results suggest the N-C bond formation proceeds via a cisaminocupration, and not through a radical-type mechanism. Additionally, the origin of diastereoselection observed with [alpha]-methyl-[gamma]-alkenyl sulfonamide arises from avoidance of unfavourable steric interactions between the methyl substituent and the N -protecting group. Section B details the computationally guided, experimental investigation of two hydrobenzoin derivatives as ligands/ catalysts, as well as the attempted synthesis of a third hydrobenzoin derivative. The bis-boronic acid derived from hydrobenzoin was successful as a Lewis acid catalyst in the Bignielli reaction and the Conia ene reaction, but provided only racemic products. The chiral diol derived from hydrobenzoin successfully increased the rate of the addition of diethyl zinc to benzaldehyde in the presence of titanium tetraisopropoxide, however poor enantioinduction was obseverved. Notably, the observed reactivity was successfully predicted by theoretical calculations.

Synthèse diastéréosélective et énantiosélective de dérivés cyclopropaniques 1,2,3-substitués à l’aide de carbénoïdes gem-dizinciques

Les dérivés cyclopropaniques 1,2,3-substitutés sont des composés intéressants dans de nombreux domaines de la chimie. Au cours de cet ouvrage, nous nous sommes intéressés à la synthèse, tout d’abord diastéréosélective puis énantiosélective de ces composés. Nous nous sommes en particulier intéressés à l’utilisation de la zinciocyclopropanation pour l’obtention de ces dérivés cyclopropaniques 1,2,3-substitutés. Cette méthode consiste en l’utilisation d’un carbénoïde gem-dizincique pour effectuer une réaction de type Simmons-Smith. Cette stratégie a l’avantage d’être diastéréosélective favorisant la formation du zinciocyclopropane dont l’atome de zinc est dans une configuration cis avec le groupement directeur qu’est l’oxygène allylique basique. Lors de cette réaction, l’existence d’une réaction compétitive avec un réactif monozincique diminuait l’utilité de la zinciocyclopropanation. L’issue de la réaction s’est avérée dépendre fortement de la nature du carbénoïde utilisé, de la température réactionnelle et de la présence de ZnI2 dans le milieu. L’étude par GCMS de nombreuses conditions pour la formation des différents carbénoïdes a permis d’identifier les paramètres clés conduisant à la zinciocyclopropanation. Ces découvertes ont notamment permis d’étendre la réaction de zinciocyclopropanation aux alcools allyliques portant un seul groupement directeur (ie. non dérivé du 1,4-buténediol). Dans ces conditions, la réaction s’est avérée extrêmement diastéréosélective favorisant la formation du zinciocyclopropane dont l’atome de zinc est dans une configuration cis avec le groupement directeur. Afin de fonctionnaliser les zinciocyclopropanes ainsi obtenus, plusieurs réactions de fonctionnalisation in situ ont été développées. Chacune de ces méthodes a montré une conservation totale de la diastéréosélectivité obtenue lors de la réaction de zinciocyclopropanation. La versatilité de la zinciocyclopropanation a donc été démontrée. Avec une méthode diastéréosélective efficace pour la formation de zinciocyclopropanes à partir d’alcools allyliques ne portant qu’un seul groupement directeur, il est devenu possible d’envisager le développement énantiosélectif de la réaction. L’utilisation d’un dioxaborolane énantiopur a permis la zinciocyclopropanation avec de très bons excès énantiomères de divers alcools allyliques chiraux. La présence sur la même molécule d’un lien C–Zn nucléophile est d’un atome de bore électrophile a conduit à un échange bore-zinc in situ, formant un cyclopropylborinate énantioenrichi. La formation de ce composé bicyclique a permis d’obtenir une diastéréosélectivité parfaite. De nombreux alcools allyliques ont pu ainsi être convertis en cyclopropylborinates. Une réaction de Suzuki subséquente a permis la formation de dérivés cyclopropaniques 1,2,3-trisubstitués avec de très bons excès énantiomères et une excellente diastéréosélectivité. Les cyclopropylborinates obtenus à l’issue de la zinciocyclopropanation énantiosélective se sont avérés être des unités très versatiles puisque de nombreuses méthodes ont pu être développés pour leur fonctionnalisation.

Synthèse de 4-désoxy hexopyrannoses, C-disaccharides et C-glycosides biologiquement actifs

Les glucides constituent la classe de molécules organiques la plus abondante et ceux-ci jouent des rôles cruciaux dans divers processus biologiques. De part leur importance médicinale, la préparation des désoxy-sucres, des C-glycosides et des C-disaccharides est devenue un sujet de pointe en synthèse organique. De façon générale, cette thèse décrit une nouvelle synthèse de novo des 4-désoxy hexopyrannoses en plus de la préparation de C-glycosides biologiquement actifs. De plus, une attention particulière a été portée à la préparation de novo de 4-désoxy-C-disaccharides. Dans un premier temps, le catalyseur de Cr(III) de Jacobsen et un complexe binaphtol/titane ont été utilisés pour réaliser des hétéro-Diels-Alder énantiosélectives. Les dihydropyrannes ainsi générés ont été transformés en 4-désoxy hexopyrannoses présents dans la nature. De cette façon, un dérivé de l’acide ézoaminuroïque, un précurseur de la désosamine et de la néosidomycine, a été préparé suivant cette approche de novo. De plus, à titre comparatif, la néosidomycine a également été fabriquée selon une approche chiron, à partir du méthyl alpha-D-mannopyrannoside. Finalement, une évaluation biologique préliminaire de la néosidomycine a été effectuée sur une la concanavaline-A (Chapitre 2). Dans un deuxième temps, une allylation stéréosélective sur un aldéhyde lié via des liens C-C à une unité mannoside a permis de générer un alcool homoallylique. Cette dernière fonctionnalité a été transformée en 4-désoxy hexopyrannose de configuration D ou L. De cette façon, la préparation de pseudo 4-désoxy-C-disaccharides, de 4-désoxy-C-disaccharides et de pseudo 4-désoxy aza-C-disaccharides a facilement été réalisée. Les rapports diastéréoisomériques de la réaction d’allylation ont été déterminés en plus de la configuration absolue des nouveaux centres stéréogéniques formés. La transformation des alcools homoallyliques en pyrannes poly hydroxylés ou en lactames poly hydroxylés a été réalisée, en plus de la déprotection de certains membres de cette famille pour une évaluation biologique préliminaire sur la concanavaline-A (Chapitre 3). Finalement, la synthèse de C-glycosides biologiquement actifs a été réalisée selon deux volets: i) préparation de 3-C-mannopyrannosyl coumarines et ii) synthèse de C-galactosides, inhibiteurs de la lectine PA-IL. Pour ce faire, le couplage de Heck a été utilisé à partir d’un ester alpha,bêta-insaturé, attaché à une unité glycosidique via des liens C-C, pour générer un dérivé glycosyl cinnamate de méthyle. Cependant, lorsque le 2-iodophénol est utilisé comme partenaire de Heck, la coumarine correspondante a été isolée. Les dérivés C-galactopyrannosyl cinnamates de méthyle représentent de bons inhibiteurs monovalents de la PA-IL avec un Kd aussi bas que 37 micro M (Chapitre 4).

Les esters cyclopropane-1,1-dicarboxyliques et les dérivés cyclopropaniques 1,2,3-substitués : synthèses et applications

Les cyclopropanes sont des motifs d’une grande importance puisqu’ils sont présents dans plusieurs molécules biologiquement actives en plus d’être de puissants intermédiaires dans la synthèse de molécules complexes. Au cours de cet ouvrage, nous avons développé une nouvelle méthode générale pour la synthèse d’ylures d’iodonium de malonates, soit d’importants précurseurs d’esters cyclopropane-1,1-dicarboxyliques. Ainsi, à l’aide de ces ylures, une méthode très efficace pour la synthèse d’esters cyclopropane-1,1-dicarboxyliques racémiques a été développée. Des travaux ont aussi été entrepris pour la synthèse énantiosélective de ces composés. Par ailleurs, les esters cyclopropane-1,1-dicarboxyliques ont été utilisés dans le développement de deux nouvelles méthodologies, soit dans une réaction de cycloaddition (3+3) avec des imines d’azométhines et dans la formation d’allènes par l’addition-1,7 de cuprates. Nous avons aussi poursuivi l’étude synthétique du cylindrocyclophane F impliquant l’utilisation de cyclopropanes pour le contrôle des centres chiraux. Ainsi l’addition-1,5 d’un cuprate sur un ester cyclopropane-1,1-dicarboxylique a été utilisée comme l’une des étapes clés de notre synthèse. L’autre centre chiral a pu être contrôlé par l’hydrogénolyse sélective d’un cyclopropylméthanol. Ces études ont, par ailleurs, mené au développement d’une nouvelle réaction d’arylcyclopropanation énantiosélective utilisant des carbénoïdes de zinc générés in situ à partir de réactifs diazoïques. Cette méthode permet d’accéder très efficacement aux cyclopropanes 1,2,3-substitués. De plus, nous avons développé la première réaction de Simmons-Smith catalytique en zinc menant à un produit énantioenrichi.

Réactions d’ouverture d’aziridines Troc-protégées

Ce mémoire a comme sujet principal les réactions d’ouvertures d’aziridines et leur application synthétique. Notre groupe de recherche a récemment mis au point une méthode d’aziridination énantiosélective catalysée au cuivre à partir de N-tosyloxycarbamates qui permet d’obtenir une grande variété d’arylaziridines protégées avec un groupement carbamate. Or, même si le motif aziridine se retrouve dans certains produits naturels, l’intérêt de sa synthèse provient en partie de l’accès facile à différents composés contenant une fonction amine protégée qui peuvent être obtenus suite à l’ouverture d’aziridines par différents nucléophiles. L’ouverture nucléophile des aziridines fut largement explorée pour une variété de nucléophiles et d’aziridines. Toutefois, puisque les arylaziridines protégées par un groupement carbamate n’étaient auparavant pas disponibles, leur régio- et stéréosélectivité est encore méconnue. Nous présentons ici dans un premier temps, les résultats obtenus lors de l’ouverture de la p-nitrophénylaziridine protégée par un groupement Troc avec différents nucléophiles. Puis, suite à l’obtention de bonnes diastéréosélectivités lors de la synthèse d’aziridines avec le dérivé chiral PhTrocNHOTs, des réactions d’ouvertures ont été tentées avec la p-nitrophénylaziridine protégée avec un groupement PhTroc. Les conditions optimisées d’ouverture impliquent l’acide de Lewis BF3∙OEt2 (10 mol%) à 23 °C avec une variété de nucléophiles. Ces conditions ont été appliquées à l’ouverture d’une gamme d’aziridines protégées par le groupement PhTroc dont les résultats sont décrits dans cet ouvrage. Finalement, le dernier chapitre de ce mémoire rapporte l’utilisation de ces conditions dans la synthèse du (R)-Nifenalol, un agent beta-bloquant qui a démontré une activité en tant qu’antiangineux et antiarythmique.