Poster: EMMON: a WSN system architecture and toolset for large-scale and dense real-time embedded monitoring

Wireless sensor networks (WSNs) have attracted growing interest in the last decade as an infrastructure to support a diversity of ubiquitous computing and cyber-physical systems. However, most research work has focused on protocols or on specific applications. As a result, there remains a clear lack of effective and usable WSN system architectures that address both functional and non-functional requirements in an integrated fashion. This poster outlines the EMMON system architecture for large-scale, dense, real-time embedded monitoring. It provides a hierarchical communication architecture together with integrated middleware and command and control software. It has been designed to maintain as much as flexibility as possible while meeting specific applications requirements. EMMON has been validated through extensive analytical, simulation and experimental evaluations, including through a 300+ nodes test-bed the largest single-site WSN test-bed in Europe.

EMMON: a WSN system architecture for large scale and dense real-time embedded monitoring

Wireless sensor networks (WSNs) have attracted growing interest in the last decade as an infrastructure to support a diversity of ubiquitous computing and cyber-physical systems. However, most research work has focused on protocols or on specific applications. As a result, there remains a clear lack of effective, feasible and usable system architectures that address both functional and non-functional requirements in an integrated fashion. In this paper, we outline the EMMON system architecture for large-scale, dense, real-time embedded monitoring. EMMON provides a hierarchical communication architecture together with integrated middleware and command and control software. It has been designed to use standard commercially-available technologies, while maintaining as much flexibility as possible to meet specific applications requirements. The EMMON architecture has been validated through extensive simulation and experimental evaluation, including a 300+ node test-bed, which is, to the best of our knowledge, the largest single-site WSN test-bed in Europe to date.

Orchestration of heterogeneous middleware services and its application to a comand and control platform

MSC Dissertation in Computer Engineering

Marcação CE de dispositivos médicos e segurança em software

Com o crescente aumento da Teleradiologia, sentiu-se necessidade de criar mais e melhores softwares para sustentar esse crescimento. O presente trabalho pretende abordar a temática da certificação de software e a sua marcação CE, pois para dar entrada no mercado Europeu todos os Dispositivos Médicos (DM) têm de estar devidamente certificados. Para efetuar a marcação CE e a certificação serão estudadas normas e normativos adequados para marcação de DM ao nível Europeu e também dos Estados Unidos da América. A temática da segurança de dados pessoais será também estudada de forma a assegurar que o dispositivo respeite a legislação em vigor. Este estudo tem como finalidade a certificação de um software proprietário da efficientia sysPACS, um serviço online abrangente, que permite a gestão integrada do armazenamento e distribuição de imagens médicas para apoio ao diagnóstico.

Environmental indicator frameworks to design and assess environmental monitoring programs

Impact Assessment and Project Appraisal, vol. 22, n.1, March 2004, p. 47–62

Stress Ratio Effects on the fatigue Properties of Biaxially Loaded Tubular FRP-Specimens – Experimental Study

In this work tubular fiber reinforced specimens are tested for fatigue life. The specimens are biaxially loaded with tension and shear stresses, with a load angle β of 30° and 60° and a load ratio of R=0,1. There are many factors that affect fatigue life of a fiber reinforced material and the main goal of this work is to study the effects of load ratio R by obtaining S-N curves and compare them to the previous works (1). All the other parameters, such as specimen production, fatigue loading frequency and temperature, will be the same as for the previous tests. For every specimen, stiffness, temperature of the specimen during testing, crack counting and final fracture mode are obtained. Prior to testing, a study if the literature regarding the load ratio effects on composites fatigue life and with that review estimate the initial stresses to be applied in testing. In previous works (1) similar specimens have only been tested for a load ratio of R=-1 and therefore the behaviour of this tubular specimens for a different load ratio is unknown. All the data acquired will be analysed and compared to the previous works, emphasizing the differences found and discussing the possible explanations for those differences. The crack counting software, developed at the institute, has shown useful before, however different adjustments to the software parameters lead to different cracks numbers for the same picture, and therefore a better methodology will be discussed to improve the crack counting results. After the specimen’s failure, all the data will be collected and stored and fibre volume content for every specimen is also determinate. The number of tests required to make the S-N curves are obtained according to the existent standards. Additionally are also identified some improvements to the testing machine setup and to the procedures for future testing.

Autonomous guided vehicles applied to industrial engineering and management studies

This article presents a framework to an Industrial Engineering and Management Science course from School of Management and Industrial Studies using Autonomous Ground Vehicles (AGV) to supply materials to a production line as an experimental setup for the students to acquire knowledge in the production robotics area. The students must be capable to understand and put into good use several concepts that will be of utmost importance in their professional life such as critical decisions regarding the study, development and implementation of a production line. The main focus is a production line using AGVs, where the students are required to address several topics such as: sensors actuators, controllers and an high level management and optimization software. The presented framework brings to the robotics teaching community methodologies that allow students from different backgrounds, that normally don’t experiment with the robotics concepts in practice due to the big gap between theory and practice, to go straight to ”making” robotics. Our aim was to suppress the minimum start point level thus allowing any student to fully experience robotics with little background knowledge.

Phenotypical and genotypical characterization of Bordetella pertussis strains isolated in São Paulo, Brazil, 1988-2002

Whooping cough or pertussis was a major cause of childhood morbidity and mortality in the world until the introduction of a whole-cell vaccine in the 1940's. However, since the early 1980's whooping cough cases have increased in many countries, becoming an important problem of public health. This increase may be due to accuracy of laboratory diagnosis and reporting of the disease, a decline in immunity over time, demographic changes, and adaptation of the bacterial population to vaccine-induced immunity. The purpose of this study was to analyze phenotypically and genotypically a collection of 67 Bordetella pertussis isolates recovered during the period 1988-2002 in São Paulo State, Brazil to determine their characteristics and relatedness. All isolates were submitted to susceptibility testing to erythromycin, serotyping, and 56 isolates were analyzed by Pulsed Field Gel Electrophoresis (PFGE). All isolates were susceptible to erythromycin and the majority of them belonged to serotype 1,3. The 56 isolates were classified into 11 PFGE profiles according to the differences in banding patterns. Although more than 60% of the isolates were recovered from patients aged less than three months, almost 15% of them were isolated from adolescents/adults evidencing the increase in the incidence of pertussis among this group of age.

Desenvolvimento de Frameworks de Testes Automáticos de Software

O objetivo deste trabalho é o desenvolvimento de frameworks de testes automáticos de software. Este tipo de testes normalmente está associado ao modelo evolucionário e às metodologias ágeis de desenvolvimento de software, enquanto que os testes manuais estão relacionados com o modelo em cascata e as metodologias tradicionais. Como tal foi efetuado um estudo comparativo sobre os tipos de metodologias e de testes existentes, para decidir quais os que melhor se adequavam ao projeto e dar resposta à questão "Será que realmente compensa realizar testes (automáticos)?". Finalizado o estudo foram desenvolvidas duas frameworks, a primeira para a implementação de testes funcionais e unitários sem dependências a ser utilizada pelos estagiários curriculares da LabOrders, e a segunda para a implementação de testes unitários com dependências externas de base de dados e serviços, a ser utilizada pelos funcionários da empresa. Nas últimas duas décadas as metodologias ágeis de desenvolvimento de software não pararam de evoluir, no entanto as ferramentas de automação não conseguiram acompanhar este progresso. Muitas áreas não são abrangidas pelos testes e por isso alguns têm de ser feitos manualmente. Posto isto foram criadas várias funcionalidades inovadoras para aumentar a cobertura dos testes e tornar as frameworks o mais intuitivas possível, nomeadamente: 1. Download automático de ficheiros através do Internet Explorer 9 (e versões mais recentes). 2. Análise do conteúdo de ficheiros .pdf (através dos testes). 3. Obtenção de elementos web e respetivos atributos através de código jQuery utilizando a API WebDriver com PHP bindings. 4. Exibição de mensagens de erro personalizadas quando não é possível encontrar um determinado elemento. As frameworks implementadas estão também preparadas para a criação de outros testes (de carga, integração, regressão) que possam vir a ser necessários no futuro. Foram testadas em contexto de trabalho pelos colaboradores e clientes da empresa onde foi realizado o projeto de mestrado e os resultados permitiram concluir que a adoção de uma metodologia de desenvolvimento de software com testes automáticos pode aumentar a produtividade, reduzir as falhas e potenciar o cumprimento de orçamentos e prazos dos projetos das organizações.

Landslide susceptibility assessment in Karanganyar regency - Indonesia - Comparison of knowledge-based and Data-driven Models

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Chemotherapeutic effects on larval stages of Schistosoma mansoni during infection and re-infection of mice

The sensitivity of the larval stages of Schistosoma mansoni to chemotherapy with praziquantel and oxamniquine was tested in mice during primary and secondary infections and after different intervals from cercarial exposure. Worm recovery by perfusion of the porto-mesenteric system, followed by counting and a morphometric study of the parasite, allowed the conclusion that the relative resistance of the larval stages of S. mansoni to schistosomicide drugs, demonstrated in primary infections, also persists when the host is already infected. This indicates that a therapeutic failure may result when an infected host is treated some time after being re-infected, because of the presence of migrating, drug-resistant, immature forms of the parasite.

A distributed platform for the volunteer execution of workflows on a local area network

Thesis submitted in fulfilment of the requirements for the Degree of Master of Science in Computer Science

Integrated data model and DSL modifications

Companies are increasingly more and more dependent on distributed web-based software systems to support their businesses. This increases the need to maintain and extend software systems with up-to-date new features. Thus, the development process to introduce new features usually needs to be swift and agile, and the supporting software evolution process needs to be safe, fast, and efficient. However, this is usually a difficult and challenging task for a developer due to the lack of support offered by programming environments, frameworks, and database management systems. Changes needed at the code level, database model, and the actual data contained in the database must be planned and developed together and executed in a synchronized way. Even under a careful development discipline, the impact of changing an application data model is hard to predict. The lifetime of an application comprises changes and updates designed and tested using data, which is usually far from the real, production, data. So, coding DDL and DML SQL scripts to update database schema and data, is the usual (and hard) approach taken by developers. Such manual approach is error prone and disconnected from the real data in production, because developers may not know the exact impact of their changes. This work aims to improve the maintenance process in the context of Agile Platform by Outsystems. Our goal is to design and implement new data-model evolution features that ensure a safe support for change and a sound migration process. Our solution includes impact analysis mechanisms targeting the data model and the data itself. This provides, to developers, a safe, simple, and guided evolution process.

UAV - based imagery processing using structure from motion and remote sensing technology

With the recent advances in technology and miniaturization of devices such as GPS or IMU, Unmanned Aerial Vehicles became a feasible platform for a Remote Sensing applications. The use of UAVs compared to the conventional aerial platforms provides a set of advantages such as higher spatial resolution of the derived products. UAV - based imagery obtained by a user grade cameras introduces a set of problems which have to be solved, e. g. rotational or angular differences or unknown or insufficiently precise IO and EO camera parameters. In this work, UAV - based imagery of RGB and CIR type was processed using two different workflows based on PhotoScan and VisualSfM software solutions resulting in the DSM and orthophoto products. Feature detection and matching parameters influence on the result quality as well as a processing time was examined and the optimal parameter setup was presented. Products of the both workflows were compared in terms of a quality and a spatial accuracy. Both workflows were compared by presenting the processing times and quality of the results. Finally, the obtained products were used in order to demonstrate vegetation classification. Contribution of the IHS transformations was examined with respect to the classification accuracy.

O uso do software de edição áudio Audacity 2.0.5: aprendizagens decorrentes da sua utilização

Contém CD com áudio como anexo