A modelling approach for coupling numerical analytical techniques applied in microsystems

In this paper, a method for the integration of several numerical analytical techniques that are used in microsystems design and failure analysis is presented. The analytical techniques are categorized into four groups in the discussion, namely the high-fidelity analytical tools, i.e. finite element (FE) method, the fast analytical tools referring to reduced order modeling (ROM); the optimization tools, and probability based analytical tools. The characteristics of these four tools are investigated. The interactions between the four tools are discussed and a methodology for the coupling of these four tools is offered. This methodology consists of three stages, namely reduced order modeling, deterministic optimization and probabilistic optimization. Using this methodology, a case study for optimization of a solder joint is conducted. It is shown that these analysis techniques have mutual relationship of interaction and complementation. Synthetic application of these techniques can fully utilize the advantages of these techniques and satisfy various design requirements. The case study shows that the coupling method of different tools provided by this paper is effective and efficient and it is highly relevant in the design and reliability analysis of microsystems

Ranking of length-class seasonal and regional effects on dietary compositions of the co-occurring Pagrus auratus (Sparidae) and Pseudocaranx georgianus (Carangidae)

Using an effective combination of multivariate testing and ordination analyses, this study compares the extents to which the diets of two co-occurring fish species (Pagrus auratus and Pseudocaranx georgianus) are related to body size (length class), season and region and the rank order importance of those effects. Thus, volumetric dietary compositions were determined for these species on the lower west coast of Australia, where both are abundant, and for P. auratus from the mid west coast and P. georgianus from the south coast. The diet of P. auratus on the lower west coast was strongly related to body size and slightly less to season. With increasing body size, its diet shifted from predominantly ophiuroids to larger prey, such as brachyuran crabs, teleosts, echinoids and ultimately asteroids, probably reflecting a shift from foraging over soft sediments to areas over and around reefs. Seasonal changes on the lower west coast were restricted mainly to small P. auratus, while larger fish underwent seasonal changes further north. Analyses using a common size range of medium to larger P. auratus demonstrated that dietary composition differed more between regions than seasons. The relationships between diet and length class of P. georgianus on both the lower west and south coasts were less pronounced than for P. auratus and seasonal changes were restricted to the south coast, where amphipod consumption increased markedly in summer. The diet of P. georgianus was related far more to region than length class and season, with more small teleosts, small crabs, carideans and littorinids and less amphipods, isopods and small bivalves being ingested on the lower west than south coasts. Although crabs and teleosts were important typifying prey of P. auratus and P. georgianus, when co-occurring, the former predator tended to ingest greater volumes of larger and often less mobile prey. This reflects differences in dentition, jaw morphology and feeding behaviour and reduces the potential for competition for food resources. The results imply that P. auratus and P. georgianus are opportunistic feeders and that the effects of length class, season and region on dietary composition and their rank orders can vary markedly between species and for length class and season between regions for the same species.

Addressing Bed Costs for the Elderly: A New Methodology for Modelling Patient Outcomes and Length of Stay

The proportion of elderly in the population has dramatically increased and will continue to do so for at least the next 50 years. Medical resources throughout the world are feeling the added strain of the increasing proportion of elderly in the population. The effective care of elderly patients in hospitals may be enhanced by accurately modelling the length of stay of the patients in hospital and the associated costs involved. This paper examines previously developed models for patient length of stay in hospital and describes the recently developed conditional phase-type distribution (C-Ph) to model patient duration of stay in relation to explanatory patient variables. The Clinics data set was used to demonstrate the C-Ph methodology. The resulting model highlighted a strong relationship between Barthel grade, patient outcome and length of stay showing various groups of patient behaviour. The patients who stay in hospital for a very long time are usually those that consume the largest amount of hospital resources. These have been identified as the patients whose resulting outcome is transfer. Overall, the majority of transfer patients spend a considerably longer period of time in hospital compared to patients who die or are discharged home. The C-Ph model has the potential for considering costs where different costs are attached to the various phases or subgroups of patients and the anticipated cost of care estimated in advance. It is hoped that such a method will lead to the successful identification of the most cost effective case-mix management of the hospital ward.

Effective collision strengths for electron impact excitation of C1III

Effective collision strengths for electron-impact excitation of the phosphorus-like ion Cl III are presented for all fine- structure transitions among the levels arising from the lowest 23 LS states. The collisional cross sections are computed in the multichannel close-coupling R-matrix approximation, where sophisticated configuration-interaction wave functions are used to represent the target states. The 23 LS states are formed from the basis configurations 3s(2)3p(3). 3s3p(4). 3s(2)3p(2)3d, and 3s(2)3p(2)4s, and correspond to 49 fine- structure levels, leading to a total possible 1176 fine- structure transitions. The effective collision strengths. obtained by averaging the electron collision strengths over a Maxwellian distribution of electron velocities. are tabulated in this paper for all 1176 transitions and for electron temperatures in the ranges T(K) = 7500-25.000 and log T(K) = 4.4-5.3. The former range encompasses the temperatures of particular importance for application to gaseous nebulae. while the latter range is more applicable to the study of solar and laboratory-type plasmas. (C) 2001 Academic Press.

Mixed-dimensional coupling in finite element models

In many finite element analysis models it would be desirable to combine reduced- or lower-dimensional element types with higher-dimensional element types in a single model. In order to achieve compatibility of displacements and stress equilibrium at the junction or interface between the differing element types, it is important in such cases to integrate into the analysis some scheme for coupling the element types. A novel and effective scheme for establishing compatibility and equilibrium at the dimensional interface is described and its merits and capabilities are demonstrated. Copyright (C) 2000 John Wiley & Sons, Ltd.

Determination of the Tolman length in the improved Derjaguin-Broekhoff-de Boer theory for capillary condensation of ethanol in mesoporous thin films by ellipsometric porosimetry

Ethanol adsorption-desorption isotherms on well-organized mesoporous silica and titania films with hexagonal pores structure were studied by ellipsometric porosimetry. The mesopore volume Was calculated from the change of the effective refractive index at the end points of the isotherm. An improved Derjaguin-Broekhoff-de Boer (IDBdB) model for cylindrical pores is proposed for the determination of the pore size. In this model, the disjoining pressure isotherms were obtained by measuring the thickness of the ethanol film on a non-porous film with the same chemical composition. This approach eliminates uncertainties related to the application of the statistical film thickness determined via t-plots in previous versions of the DBdB model. The deviation in the surface tension of ethanol in the mesopores from that of a flat interface was described by the Tolman parameter in the Gibbs-Tolman-Koening-Buff equation. A positive value of the Tolman parameter of 0.2 nm was found from the fitting of the desorption branch of the isotherms to the experimental data obtained by Low Angle X-ray Diffraction (LA-XRD) and Transmission Electron Microscopy (TEM) measurements in the range of pore diameters between 2.1 and 8.3 nm. (C) 2009 Elsevier Inc. All rights reserved.

Assessing length of stay and associated characteristics of geriatric patients in Northern Ireland

The effective provision of care for the elderly is becoming increasingly more difficult. This is due to the rising proportion of elderly in the population, increasing demands placed on the health services and the financial strain placed on an already stretched economy. The research presented in this paper uses three different models to represent the length of stay distribution of geriatric patients admitted to one of the six key acute hospitals in Northern Ireland and various patient characteristics associated with their respective length of stay. The accurate modelling of bed usage within wards would enable hospital managers to prepare patient discharge packages and rehabilitation services in advance. The models presented within the paper include a Cox proportional hazards model, a Bayesian network with a discrete variable to represent length of stay and a special conditional phase-type model (C-Ph) with a connecting outcome node. This research demonstrates the new efficient fitting algorithm employed for Coxian phase-type distributions while updating C-Ph models for recent elderly patient data.

Collisions Strengths and Effective Collision Strengths for transitions within the ground state configuration of S III

We have carried out a 29-state R-matrix calculation in order to calculate collision strengths and effective collision strengths for the electron impact excitation of S III. The recently developed parallel RMATRX II suite of codes have been used, which perform the calculation in intermediate coupling. Collision strengths have been generated over an electron energy range of 0-12 Ryd, and effective collision strength data have been calculated from these at electron temperatures in the range 1000-100,000 K. Results are here presented for the fine-structure transitions between the ground-state configurations of 3s(2)3p(2) P-3(0,1,2), D-1(2), and S-1(0), and the values given resolve a discrepancy between two previous R-matrix calculations.

Effective cutting of a quantum spin chain by bond impurities

Spin chains are promising media for short-haul quantum communication. Their usefulness is manifested in all those situations where stationary information carriers are involved. In the majority of the communication schemes relying on quantum spin chains, the latter are assumed to be finite in length, with well-addressable end-chain spins. In this paper we propose that such a configuration could actually be achieved by a mechanism that is able to effectively cut a spin ring through the insertion of bond defects. We then show how suitable physical quantities can be identified as figures of merit for the effectiveness of the cut. We find that, even for modest strengths of the bond defect, a ring is effectively cut at the defect site. In turn, this has important effects on the amount of correlations shared by the spins across the resulting chain, which we study by means of a scattering-based mechanism of a clear physical interpretation. © 2013 American Physical Society.

Realizing Accelerated Cost-Effective Distributed RAID

The exponential growth in user and application data entails new means for providing fault tolerance and protection against data loss. High Performance Com- puting (HPC) storage systems, which are at the forefront of handling the data del- uge, typically employ hardware RAID at the backend. However, such solutions are costly, do not ensure end-to-end data integrity, and can become a bottleneck during data reconstruction. In this paper, we design an innovative solution to achieve a flex- ible, fault-tolerant, and high-performance RAID-6 solution for a parallel file system (PFS). Our system utilizes low-cost, strategically placed GPUs — both on the client and server sides — to accelerate parity computation. In contrast to hardware-based approaches, we provide full control over the size, length and location of a RAID array on a per file basis, end-to-end data integrity checking, and parallelization of RAID array reconstruction. We have deployed our system in conjunction with the widely-used Lustre PFS, and show that our approach is feasible and imposes ac- ceptable overhead.

Dipolar emission in trench metal-insulator-metal waveguides for short-scale plasmonic communications: numerical optimization

Here we consider the numerical optimization of active surface plasmon polariton (SPP) trench waveguides suited for integration with luminescent polymers for use as highly localized SPP source devices in short-scale communication integrated circuits. The numerical analysis of the SPP modes within trench waveguide systems provides detailed information on the mode field components, effective indices, propagation lengths and mode areas. Such trench waveguide systems offer extremely high confinement with propagation on length scales appropriate to local interconnects, along with high efficiency coupling of dipolar emitters to waveguided plasmonic modes which can be close to 80%. The large Purcell factor exhibited in these structures will further lead to faster modulation capabilities along with an increased quantum yield beneficial for the proposed plasmon-emitting diode, a plasmonic analog of the light-emitting diode. The confinement of studied guided modes is on the order of 50 nm and the delay over the shorter 5 μm length scales will be on the order of 0.1 ps for the slowest propagating modes of the system, and significantly less for the faster modes.

Effective collision strengths for election impact excitation of Cl III

Effective collision strengths for electron-impact excitation of the phosphorus-like ion Cl III are presented for all fine-structure transitions among the levels arising from the lowest 23 LS states. The collisional cross sections are computed in the multichannel close-coupling R-matrix approximation, where sophisticated configuration-interaction wave functions are used to represent the target states. The 23 LS states are formed from the basis configurations 3s²3p³, 3s3p⁴, 3s²3p²3d, and 3s²3p²4s, and correspond to 49 fine-structure levels, leading to a total possible 1176 fine-structure transitions. The effective collision strengths, obtained by averaging the electron collision strengths over a Maxwellian distribution of electron velocities, are tabulated in this paper for all 1176 transitions and for electron temperatures in the ranges T(K)=7500-25,000 and log T(K)=4.4-5.4. The former range encompasses the temperatures of particular importance for application to gaseous nebulae, while the latter range is more applicable to the study of solar and laboratory-type plasmas. © 2001 Academic Press.

Effective collision strengths for forbidden transitions among the 3s23p3 fine-structure levels of Cl III

Effective collision strengths for the 10 astrophysically important fine-structure forbidden transitions among the ⁴S^o, ²D^o and ²P^o levels in the 3s²3p³ configuration of Cl III are presented. The calculation employs the multichannel R-matrix method to compute the electron-impact excitation collision strengths in a close-coupling expansion, which incorporates the lowest 23 LS target eigenstates of Cl III. These states are formed from the 3s²3p³, 3s3p⁴, 3s²3p²3d and 3s²3p²4s configurations. The Maxwellian-averaged effective collision strengths are presented graphically for all 10 fine-structure transitions over a wide range of electron temperatures appropriate for astrophysical applications [log T(K) = 3.3 - log T(K) = 5.9]. Comparisons are made with the earlier seven-state close-coupling calculation of Butler & Zeippen, and in general excellent agreement is found in the low-temperature region where a comparison is possible [log T(K) = 3.3 - log T(K) = 4.7]. However, discrepancies of up to 30 per cent are found to occur for the forbidden transitions which involve the ⁴S^o ground state level, particularly for the lowest temperatures considered. At the higher temperatures, the present data are the only reliable results currently available.

Effective collision strengths for fine-structure forbidden transitions among the 2s22p3 levels of S x

Effective collision strengths for electron-impact excitation of the N-like ion S x are calculated in the close-coupling approximation using the multichannel R-matrix method. Specific attention is given to the 10 astrophysically important fine-structure forbidden transitions among the ⁴S^O, ²D^o and ²P^o levels in the 2s²2p³ ground configuration. The total (e^- + ion) wavefunction is expanded in terms of the 11 lowest LS eigenstates of S x, and each eigenstate is represented by extensive configuration-interaction wavefunctions. The collision strengths obtained are thermally averaged over a Maxwellian distribution of velocities, for all 10 fine-structure transitions, over the range of electron temperatures log T(K) = 4.6-6.7 (the range appropriate for astrophysical applications). The present effective collision strengths are the only results currently available for these fine-structure transition rates.

Effective collision strengths for fine-structure forbidden transitions among the 2s22p3 levels of Ne IV

Effective collision strengths for electron-impact excitation of the N-like ion NeIV are calculated in the close-coupling approximation using the multichannel R-matrix method. Specific attention is given to the 10 astrophysically important fine-structure forbidden transitions among the ⁴S^o, ²D^o and ²P^o levels in the 2s²2p³ ground-state configuration. The expansion of the total wavefunction incorporates the lowest 11 LS eigenstates of NeIV, consisting of eight n = 2 terms with configurations 2s²2p³, 2s2p⁴ and 2p⁵, together with three n = 3 states of configuration 2s²2p²3s. We present in graphical form the effective collision strengths obtained by thermally averaging the collision strengths over a Maxwellian distribution of velocities, for all 10 fine-structure transitions, over the range of electron temperatures log T(K) = 3.6 to log T(K) = 6.1 (the range appropriate for astrophysical applications). Comparisons are made with the earlier, less sophisticated close-coupling calculation of Giles, and excellent agreement is found in the limited temperature region where a comparison is possible [log T(K) = 3.7 to log 7(K) = 4.3]. At higher temperatures the present data are the only reliable results currently available.