Optical properties of zirconium oxynitride films: the effect of composition, electronic and crystalline structures

tThis work is devoted to the investigation of zirconium oxynitride (ZrOxNy) films with varied opticalresponses prompted by the variations in their compositional and structural properties. The films wereprepared by dc reactive magnetron sputtering of Zr, using Ar and a reactive gas mixture of N2+ O2(17:3).The colour of the films changed from metallic-like, very bright yellow-pale and golden yellow, for low gasflows to red-brownish for intermediate gas flows. Associated to this colour change there was a significantdecrease of brightness. With further increase of the reactive gas flow, the colour of the samples changedfrom red-brownish to dark blue or even to interference colourations. The variations in composition dis-closed the existence of four different zones, which were found to be closely related with the variationsin the crystalline structure. XRD analysis revealed the change from a B1 NaCl face-centred cubic zirco-nium nitride-type phase for films prepared with low reactive gas flows, towards a poorly crystallizedover-stoichiometric nitride phase, which may be similar to that of Zr3N4with some probable oxygeninclusions within nitrogen positions, for films prepared with intermediate reactive gas flows. For highreactive gas flows, the films developed an oxynitride-type phase, similar to that of -Zr2ON2with someoxygen atoms occupying some of the nitrogen positions, evolving to a ZrO2monoclinic type structurewithin the zone where films were prepared with relatively high reactive gas flows. The analysis carriedout by reflected electron energy loss spectroscopy (REELS) revealed a continuous depopulation of thed-band and an opening of an energy gap between the valence band (2p) and the Fermi level close to 5 eV.The ZrN-based coatings (zone I and II) presented intrinsic colourations, with a decrease in brightness anda colour change from bright yellow to golden yellow, red brownish and dark blue. Associated to thesechanges, there was also a shift of the reflectivity minimum to lower energies, with the increase of thenon-metallic content. The samples lying in the two last zones (zone III, oxynitride and zone IV, oxide films)revealed a typical semi-transparent-optical behaviour showing interference-like colourations only dueto the complete depopulation of the d band at the Fermi level. The samples lying in these zones presentedalso an increase of the optical bandgap from 2 to 3.6 eV.

Electronic tongue: a versatile tool for mineral and fruit-flavored waters recognition

Natural mineral waters (still), effervescent natural mineral waters (sparkling) and aromatized waters with fruit-flavors (still or sparkling) are an emerging market. In this work, the capability of a potentiometric electronic tongue, comprised with lipid polymeric membranes, to quantitatively estimate routinely quality physicochemical parameters (pH and conductivity) as well as to qualitatively classify water samples according to the type of water was evaluated. The study showed that a linear discriminant model, based on 21 sensors selected by the simulated annealing algorithm, could correctly classify 100 % of the water samples (leave-one out cross-validation). This potential was further demonstrated by applying a repeated K-fold cross-validation (guaranteeing that at least 15 % of independent samples were only used for internal-validation) for which 96 % of correct classifications were attained. The satisfactory recognition performance of the E-tongue could be attributed to the pH, conductivity, sugars and organic acids contents of the studied waters, which turned out in significant differences of sweetness perception indexes and total acid flavor. Moreover, the E-tongue combined with multivariate linear regression models, based on sub-sets of sensors selected by the simulated annealing algorithm, could accurately estimate waters pH (25 sensors: R 2 equal to 0.99 and 0.97 for leave-one-out or repeated K-folds cross-validation) and conductivity (23 sensors: R 2 equal to 0.997 and 0.99 for leave-one-out or repeated K-folds cross-validation). So, the overall satisfactory results achieved, allow envisaging a potential future application of electronic tongue devices for bottled water analysis and classification.

Development of a semi-automatic self learning pattern recognition system for the control of electronic boards

This project was funded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway - Mayo Institute of Technology and an industrial company, Tyco/Mallinckrodt Galway. The project aimed to develop a semi - automatic, self - learning pattern recognition system capable of detecting defects on the printed circuits boards such as component vacancy, component misalignment, component orientation, component error, and component weld. The research was conducted in three directions: image acquisition, image filtering/recognition and software development. Image acquisition studied the process of forming and digitizing images and some fundamental aspects regarding the human visual perception. The importance of choosing the right camera and illumination system for a certain type of problem has been highlighted. Probably the most important step towards image recognition is image filtering, The filters are used to correct and enhance images in order to prepare them for recognition. Convolution, histogram equalisation, filters based on Boolean mathematics, noise reduction, edge detection, geometrical filters, cross-correlation filters and image compression are some examples of the filters that have been studied and successfully implemented in the software application. The software application developed during the research is customized in order to meet the requirements of the industrial partner. The application is able to analyze pictures, perform the filtering, build libraries, process images and generate log files. It incorporates most of the filters studied and together with the illumination system and the camera it provides a fully integrated framework able to analyze defects on printed circuit boards.

Cardiovascular Research Publications from Latin America between 1999 and 2008. A Bibliometric Study

Background:Cardiovascular research publications seem to be increasing in Latin America overall.Objective:To analyze trends in cardiovascular publications and their citations from countries in Latin America between 1999 and 2008, and to compare them with those from the rest of the countries.Methods:We retrieved references of cardiovascular publications between 1999 and 2008 and their five-year post-publication citations from the Web of Knowledge database. For countries in Latin America, we calculated the total number of publications and their citation indices (total citations divided by number of publications) by year. We analyzed trends on publications and citation indices over time using Poisson regression models. The analysis was repeated for Latin America as a region, and compared with that for the rest of the countries grouped according to economic development.Results:Brazil (n = 6,132) had the highest number of publications in1999-2008, followed by Argentina (n = 1,686), Mexico (n = 1,368) and Chile (n = 874). Most countries showed an increase in publications over time, leaded by Guatemala (36.5% annually [95%CI: 16.7%-59.7%]), Colombia (22.1% [16.3%-28.2%]), Costa Rica (18.1% [8.1%-28.9%]) and Brazil (17.9% [16.9%-19.1%]). However, trends on citation indices varied widely (from -33.8% to 28.4%). From 1999 to 2008, cardiovascular publications of Latin America increased by 12.9% (12.1%-13.5%) annually. However, the citation indices of Latin America increased 1.5% (1.3%-1.7%) annually, a lower increase than those of all other country groups analyzed.Conclusions:Although the number of cardiovascular publications of Latin America increased from 1999 to 2008, trends on citation indices suggest they may have had a relatively low impact on the research field, stressing the importance of considering quality and dissemination on local research policies.

Serial publications in the British Museum (Natural History) Library.

1 (A-F)

Serial publications in the British Museum (Natural History) Library.

2 (G-Q)

Serial publications in the British Museum (Natural History) Library.

3 (R-Z)

Citation-based Plagiarism Detection : applying citation pattern analysis to identify currently non-machine-detectible disguised plagiarism in scientific publications

Magdeburg, Univ., Fak. für Informatik, Diss., 2013

Publications of Field Museum of Natural History.

Fieldiana. Botany, v. 13, part 2

Publications of Field Museum of Natural History.

Fieldiana. Botany series v. 11, index

Mycological contributions of Rolf Singer : field itinerary, index to new taxa, and list of publications / Gregory M. Mueller and Qiuxin Wu, editors.

n.s. no.38(1997)

University of Kansas publications, Museum of Natural History.

v.1 (1946-1950)

University of Kansas publications, Museum of Natural History.

v.6 (1952)