Gender differences in patients referred for atrial fibrillation management to a tertiary center

BACKGROUND: Atrial fibrillation (AF) ablation is less frequently performed in women than in men. Although the prevalence of AF is slightly higher in men, this does not fully account for the lower number of AF ablations performed in women. This study sought to examine the effect of gender on referral for AF and subsequent AF management. METHODS: Consecutive patients referred to our tertiary arrhythmia outpatient clinic for AF management were retrospectively analyzed. RESULTS: Of 264 patients referred, only 27% were women. Women were older than men (63 +/- 9 vs 58 +/- 11 years, P = 0.002), more often had paroxysmal AF (78% vs 63% in men, P = 0.022), and women more frequently complained about palpitations (71% vs 49%, P = 0.002). In addition, they had more often experienced amiodarone side effects than men (56% vs 36%, P = 0.046). In this referred population, there was no difference in the proportion of women and men undergoing AF ablation immediately following the initial evaluation (21% vs 25%, P = ns), at any time during the follow-up (38% vs 44%, P = ns), and there was no difference in the proportion of patients undergoing atrioventricular node ablation in both sexes (6% of women vs 3% of men, P = ns). CONCLUSIONS: There is an important difference in the proportion of men and women referred for management of AF in a specialized outpatient arrhythmia clinic, with women being referred three times less often than men. However, there is no gender-related difference in the subsequent treatment decisions. These findings emphasize the importance of focusing on management of symptomatic AF in women.

Validation of the estimation of physiologic ability and surgical stress (E-PASS) score in liver surgery

BACKGROUND: The estimation of physiologic ability and surgical stress (E-PASS) has been used to produce a numerical estimate of expected mortality and morbidity after elective gastrointestinal surgery. The aim of this study was to validate E-PASS in a selected cohort of patients requiring liver resections (LR). METHODS: In this retrospective study, E-PASS predictor equations for morbidity and mortality were applied to the prospective data from 243 patients requiring LR. The observed rates were compared with predicted rates using Fisher's exact test. The discriminative capability of E-PASS was evaluated using receiver-operating characteristic (ROC) curve analysis. RESULTS: The observed and predicted overall mortality rates were both 3.3% and the morbidity rates were 31.3 and 26.9%, respectively. There was a significant difference in the comprehensive risk scores for deceased and surviving patients (p = 0.043). However, the scores for patients with or without complications were not significantly different (p = 0.120). Subsequent ROC curve analysis revealed a poor predictive accuracy for morbidity. CONCLUSIONS: The E-PASS score seems to effectively predict mortality in this specific group of patients but is a poor predictor of complications. A new modified logistic regression might be required for LR in order to better predict the postoperative outcome.

Estimation and calibration of the water isotope differential diffusion length in ice core records

Palaeoclimatic information can be retrieved from the diffusion of the stable water isotope signal during firnification of snow. The diffusion length, a measure for the amount of diffusion a layer has experienced, depends on the firn temperature and the accumulation rate. We show that the estimation of the diffusion length using power spectral densities (PSDs) of the record of a single isotope species can be biased by uncertainties in spectral properties of the isotope signal prior to diffusion. By using a second water isotope and calculating the difference in diffusion lengths between the two isotopes, this problem is circumvented. We study the PSD method applied to two isotopes in detail and additionally present a new forward diffusion method for retrieving the differential diffusion length based on the Pearson correlation between the two isotope signals. The two methods are discussed and extensively tested on synthetic data which are generated in a Monte Carlo manner. We show that calibration of the PSD method with this synthetic data is necessary to be able to objectively determine the differential diffusion length. The correlation-based method proves to be a good alternative for the PSD method as it yields precision equal to or somewhat higher than the PSD method. The use of synthetic data also allows us to estimate the accuracy and precision of the two methods and to choose the best sampling strategy to obtain past temperatures with the required precision. In addition to application to synthetic data the two methods are tested on stable-isotope records from the EPICA (European Project for Ice Coring in Antarctica) ice core drilled in Dronning Maud Land, Antarctica, showing that reliable firn temperatures can be reconstructed with a typical uncertainty of 1.5 and 2 °C for the Holocene period and 2 and 2.5 °C for the last glacial period for the correlation and PSD method, respectively.

Online Format vs. Live Mode of Instruction: Do Human Capital Differences or Differences in Returns to Human Capital Explain the Differences in Outcomes?

Our paper asks the question: Does mode of instruction format (live or online format) effect test scores in the principles of macroeconomics classes? Our data are from several sections of principles of macroeconomics, some in live format, some in online format, and all taught by the same instructor. We find that test scores for the online format, when corrected for sample selection bias, are four points higher than for the live format, and the difference is statistically significant. One possible explanation for this is that there was slightly higher human capital in the classes that had the online format. A Oaxaca decomposition of this difference in grades was conducted to see how much was due to human capital and how much was due to the differences in the rates of return to human capital. This analysis reveals that 25% of the difference was due to the higher human capital with the remaining 75% due to differences in the returns to human capital. It is possible that for the relatively older student with the appropriate online learning skill set, and with schedule constrains created by family and job, the online format provides them with a more productive learning environment than does the alternative traditional live class format. Also, because our data are limited to the student s academic transcript, we recommend future research include data on learning style characteristics, and the constraints formed by family and job choices.

Differences in health status of HIV infected children cared for by parents as compared to those cared for by grandparents

Purpose. The purpose of the study was to use measures of an HIV positive child's health to examine whether or not there is a difference in their health status according to caretaker and household economic status. ^ Study design. This was a case comparison study between HIV infected children living with parents and those living with grandparents. ^ Study setting. The study was conducted at the Pediatric Infectious Disease Clinic (PIDC) in Mulago, Kampala, Uganda. ^ Participants. 369 HIV-infected children aged seven months to 15 years attending the PIDC between June 13th and August 15th 2007 as well as their caretakers. ^ Method. Patients were recruited during their clinic visits after they had seen the health care providers and waited to receive their medication. Methods used included a survey of all the 369 caregiver participants and abstraction of data from the 369 patient charts. ^ Results. There was no significant association between staging and caretaker status (OR: 0.73 95%CI 0.44–1.21 p=0.09). Children taken care of by grandparents were more likely to have low height for age z-scores and higher weight for height z-scores (OR: 0.32, 95%CI: 0.14–0.74, p = 0.005). There was no difference is social support seeking behavior between parents and grandparents. ^ Conclusion. There was no statistically significant association observed between caretaker status and presenting in advanced stages. This implies that the stage at which HIV-infected children present for care is not determined by the type of caretaker. Caretakers for HIV-infected children need a lot of support beyond medical care. ^

Racial differences in heart failure with preserved ejection fraction in the ambulatory heart failure population

Racial differences in heart failure with preserved ejection fraction (HFpEF) have rarely been studied in an ambulatory, financially "equal access" cohort, although the majority of such patients are treated as outpatients. ^ Retrospective data was collected from 2,526 patients (2,240 Whites, 286 African American) with HFpEF treated at 153 VA clinics, as part of the VA External Peer Review Program (EPRP) between October 2000 and September 2002. Kaplan Meier curves (stratified by race) were created for time to first heart failure (HF) hospitalization, all cause hospitalization and death and Cox proportional multivariate regression models were constructed to evaluate the effect of race on these outcomes. ^ African American patients were younger (67.7 ± 11.3 vs. 71.2 ± 9.8 years; p < 0.001), had lower prevalence of atrial fibrillation (24.5 % vs. 37%; p <0.001), chronic obstructive pulmonary disease (23.4 % vs. 36.9%, p <0.001), but had higher blood pressure (systolic blood pressure > 120 mm Hg 77.6% vs. 67.8%; p < 0.01), glomerular filtration rate (67.9 ± 31.0 vs. 61.6 ± 22.6 mL/min/1.73 m2; p < 0.001), anemia (56.6% vs. 41.7%; p <0.001) as compared to whites. African Americans were found to have higher risk adjusted rate of HF hospitalization (HR 1.52, 95% CI 1.1 - 2.11; p = 0.01), with no difference in risk-adjusted all cause hospitalization (p = 0.80) and death (p= 0.21). ^ In a financially "equal access" setting of the VA, among ambulatory patients with HFpEF, African Americans have similar rates of mortality and all cause hospitalization but have an increased risk of HF hospitalizations compared to whites.^

Differences in performance for quality of care indicators for acute myocardial infarction (AMI) across various hospital categories in Texas

The study analyzed Hospital Compare data for Medicare Fee-for-service patients at least 65 years of age to determine whether hospital performance for AMI outcome and processes of care measures differ amongst Texas hospitals with respect to ownership status (for profit vs. not-for-profit), academic status (teaching vs. non-teaching) and geographical setting (rural vs. urban). ^ The study found a statistically significant difference between for-profit and not-for-profit hospitals in four process-of-care measures (aspirin at discharge, P=0.028; ACE or ARB inhibitor for LSVD, P=0.048; Smoking cessation advice: P=0.034; outpatients who got aspirin with 24 hours of arrival in the ED, P=0.044). No significant difference in performance was found between COTH-member teaching and non-teaching hospitals for any of the eight process-of-care measures or the two outcome measures for AMI. The study was unable to compare performance based on geographic setting of hospitals due to lack of sufficient data for rural hospitals. ^ The results of the study suggest that for-profit Texas hospitals might be slightly better than not-for –profit hospitals at providing possible heart attack patients with certain processes of care.^

Selected topics in the Hydrodynamics of floating offshore wind turbines: heave damping and second order surge motions

La Energía eléctrica producida mediante tecnología eólica flotante es uno de los recursos más prometedores para reducir la dependencia de energía proveniente de combustibles fósiles. Esta tecnología es de especial interés en países como España, donde la plataforma continental es estrecha y existen pocas áreas para el desarrollo de estructuras fijas. Entre los diferentes conceptos flotantes, esta tesis se ha ocupado de la tipología semisumergible. Estas plataformas pueden experimentar movimientos resonantes en largada y arfada. En largada, dado que el periodo de resonancia es largo estos puede ser inducidos por efectos de segundo orden de deriva lenta que pueden tener una influencia muy significativa en las cargas en los fondeos. En arfada las fuerzas de primer orden pueden inducir grandes movimientos y por tanto la correcta determinación del amortiguamiento es esencial para la analizar la operatividad de la plataforma. Esta tesis ha investigado estos dos efectos, para ello se ha usado como caso base el diseño de una plataforma desarrollada en el proyecto Europeo Hiprwind. La plataforma se compone de 3 columnas cilíndricas unidas mediante montantes estructurales horizontales y diagonales, Los cilindros proporcionan flotabilidad y momentos adrizante. A la base de cada columna se le ha añadido un gran “Heave Plate” o placa de cierre. El diseño es similar a otros diseños previos (Windfloat). Se ha fabricado un modelo a escala de una de las columnas para el estudio detallado del amortiguamiento mediante oscilaciones forzadas. Las dimensiones del modelo (1m diámetro en la placa de cierre) lo hacen, de los conocidos por el candidato, el mayor para el que se han publicado datos. El diseño del cilindro se ha realizado de tal manera que permite la fijación de placas de cierre planas o con refuerzo, ambos modelos se han fabricado y analizado. El modelo con refuerzos es una reproducción exacta del diseño a escala real incluyendo detalles distintivos del mismo, siendo el más importante la placa vertical perimetral. Los ensayos de oscilaciones forzadas se han realizado para un rango de frecuencias, tanto para el disco plano como el reforzado. Se han medido las fuerzas durante los ensayos y se han calculado los coeficientes de amortiguamiento y de masa añadida. Estos coeficientes son necesarios para el cálculo del fondeo mediante simulaciones en el dominio del tiempo. Los coeficientes calculados se han comparado con la literatura existente, con cálculos potenciales y por ultimo con cálculos CFD. Para disponer de información relevante para el diseño estructural de la plataforma se han medido y analizado experimentalmente las presiones en la parte superior e inferior de cada placa de cierre. Para la correcta estimación numérica de las fuerzas de deriva lenta en la plataforma se ha realizado una campaña experimental que incluye ensayos con modelo cautivo de la plataforma completa en olas bicromaticas. Pese a que estos experimentos no reproducen un escenario de oleaje realista, los mismos permiten una verificación del modelo numérico mediante la comparación de fuerzas medidas en el modelo físico y el numérico. Como resultados de esta tesis podemos enumerar las siguientes conclusiones. 1. El amortiguamiento y la masa añadida muestran una pequeña dependencia con la frecuencia pero una gran dependencia con la amplitud del movimiento. siendo coherente con investigaciones existentes. 2. Las medidas con la placa de cierre reforzada con cierre vertical en el borde, muestra un amortiguamiento significativamente menor comparada con la placa plana. Esto implica que para ensayos de canal es necesario incluir estos detalles en el modelo. 3. La masa añadida no muestra grandes variaciones comparando placa plana y placa con refuerzos. 4. Un coeficiente de amortiguamiento del 6% del crítico se puede considerar conservador para el cálculo en el dominio de la frecuencia. Este amortiguamiento es equivalente a un coeficiente de “drag” de 4 en elementos de Morison cuadráticos en las placas de cierre usadas en simulaciones en el dominio del tiempo. 5. Se han encontrado discrepancias en algunos valores de masa añadida y amortiguamiento de la placa plana al comparar con datos publicados. Se han propuesto algunas explicaciones basadas en las diferencias en la relación de espesores, en la distancia a la superficie libre y también relacionadas con efectos de escala. 6. La presión en la placa con refuerzos son similares a las de la placa plana, excepto en la zona del borde donde la placa con refuerzo vertical induce una gran diferencias de presiones entre la cara superior e inferior. 7. La máxima diferencia de presión escala coherentemente con la fuerza equivalente a la aceleración de la masa añadida distribuida sobre la placa. 8. Las masas añadidas calculadas con el código potencial (WADAM) no son suficientemente precisas, Este software no contempla el modelado de placas de pequeño espesor con dipolos, la poca precisión de los resultados aumenta la importancia de este tipo de elementos al realizar simulaciones con códigos potenciales para este tipo de plataformas que incluyen elementos de poco espesor. 9. Respecto al código CFD (Ansys CFX) la precisión de los cálculos es razonable para la placa plana, esta precisión disminuye para la placa con refuerzo vertical en el borde, como era de esperar dado la mayor complejidad del flujo. 10. Respecto al segundo orden, los resultados, en general, muestran que, aunque la tendencia en las fuerzas de segundo orden se captura bien con los códigos numéricos, se observan algunas reducciones en comparación con los datos experimentales. Las diferencias entre simulaciones y datos experimentales son mayores al usar la aproximación de Newman, que usa únicamente resultados de primer orden para el cálculo de las fuerzas de deriva media. 11. Es importante remarcar que las tendencias observadas en los resultados con modelo fijo cambiarn cuando el modelo este libre, el impacto que los errores en las estimaciones de fuerzas segundo orden tienen en el sistema de fondeo dependen de las condiciones ambientales que imponen las cargas ultimas en dichas líneas. En cualquier caso los resultados que se han obtenido en esta investigación confirman que es necesaria y deseable una detallada investigación de los métodos usados en la estimación de las fuerzas no lineales en las turbinas flotantes para que pueda servir de guía en futuros diseños de estos sistemas. Finalmente, el candidato espera que esta investigación pueda beneficiar a la industria eólica offshore en mejorar el diseño hidrodinámico del concepto semisumergible. ABSTRACT Electrical power obtained from floating offshore wind turbines is one of the promising resources which can reduce the fossil fuel energy consumption and cover worldwide energy demands. The concept is the most competitive in countries, such as Spain, where the continental shelf is narrow and does not provide space for fixed structures. Among the different floating structures concepts, this thesis has dealt with the semisubmersible one. Platforms of this kind may experience resonant motions both in surge and heave directions. In surge, since the platform natural period is long, such resonance can be excited with second order slow drift forces and may have substantial influence on mooring loads. In heave, first order forces can induce significant motion, whose damping is a crucial factor for the platform downtime. These two topics have been investigated in this thesis. To this aim, a design developed during HiPRWind EU project, has been selected as reference case study. The platform is composed of three cylindrical legs, linked together by a set of structural braces. The cylinders provide buoyancy and restoring forces and moments. Large circular heave plates have been attached to their bases. The design is similar to other documented in literature (e.g. Windfloat), which implies outcomes could have a general value. A large scale model of one of the legs has been built in order to study heave damping through forced oscillations. The final dimensions of the specimen (one meter diameter discs) make it, to the candidate’s knowledge, the largest for which data has been published. The model design allows for the fitting of either a plain solid heave plate or a flapped reinforced one; both have been built. The latter is a model scale reproduction of the prototype heave plate and includes some distinctive features, the most important being the inclusion of a vertical flap on its perimeter. The forced oscillation tests have been conducted for a range of frequencies and amplitudes, with both the solid plain model and the vertical flap one. Forces have been measured, from which added mass and damping coefficients have been obtained. These are necessary to accurately compute time-domain simulations of mooring design. The coefficients have been compared with literature, and potential flow and CFD predictions. In order to provide information for the structural design of the platform, pressure measurements on the top and bottom side of the heave discs have been recorded and pressure differences analyzed. In addition, in order to conduct a detailed investigation on the numerical estimations of the slow-drift forces of the HiPRWind platform, an experimental campaign involving captive (fixed) model tests of a model of the whole platform in bichromatic waves has been carried out. Although not reproducing the more realistic scenario, these tests allowed a preliminary verification of the numerical model based directly on the forces measured on the structure. The following outcomes can be enumerated: 1. Damping and added mass coefficients show, on one hand, a small dependence with frequency and, on the other hand, a large dependence with the motion amplitude, which is coherent with previously published research. 2. Measurements with the prototype plate, equipped with the vertical flap, show that damping drops significantly when comparing this to the plain one. This implies that, for tank tests of the whole floater and turbine, the prototype plate, equipped with the flap, should be incorporated to the model. 3. Added mass values do not suffer large alterations when comparing the plain plate and the one equipped with a vertical flap. 4. A conservative damping coefficient equal to 6% of the critical damping can be considered adequate for the prototype heave plate for frequency domain analysis. A corresponding drag coefficient equal to 4.0 can be used in time domain simulations to define Morison elements. 5. When comparing to published data, some discrepancies in added mass and damping coefficients for the solid plain plate have been found. Explanations have been suggested, focusing mainly on differences in thickness ratio and distance to the free surface, and eventual scale effects. 6. Pressures on the plate equipped with the vertical flap are similar in magnitude to those of the plain plate, even though substantial differences are present close to the edge, where the flap induces a larger pressure difference in the reinforced case. 7. The maximum pressure difference scales coherently with the force equivalent to the acceleration of the added mass, distributed over the disc surface. 8. Added mass coefficient values predicted with the potential solver (WADAM) are not accurate enough. The used solver does not contemplate modeling thin plates with doublets. The relatively low accuracy of the results highlights the importance of these elements when performing potential flow simulations of offshore platforms which include thin plates. 9. For the full CFD solver (Ansys CFX), the accuracy of the computations is found reasonable for the plain plate. Such accuracy diminishes for the disc equipped with a vertical flap, an expected result considering the greater complexity of the flow. 10. In regards to second order effects, in general, the results showed that, although the main trend in the behavior of the second-order forces is well captured by the numerical predictions, some under prediction of the experimental values is visible. The gap between experimental and numerical results is more pronounced when Newman’s approximation is considered, making use exclusively of the mean drift forces calculated in the first-order solution. 11. It should be observed that the trends observed in the fixed model test may change when the body is free to float, and the impact that eventual errors in the estimation of the second-order forces may have on the mooring system depends on the characteristics of the sea conditions that will ultimately impose the maximum loads on the mooring lines. Nevertheless, the preliminary results obtained in this research do confirm that a more detailed investigation of the methods adopted for the estimation of the nonlinear wave forces on the FOWT would be welcome and may provide some further guidance for the design of such systems. As a final remark, the candidate hopes this research can benefit the offshore wind industry in improving the hydrodynamic design of the semi-submersible concept.

Identification of the method to quantify soluble fibre and the effect of the source of fibre on the ileal and faecal digestibility of soluble and insoluble fibre in rabbits = Identificación del método para cuantificar la fibra soluble y el efecto de la fuente de fibra en la digestibilidad ileal y fecal de la fibra soluble e insoluble en conejos

La presente tesis constituye un avance en el estudio de los métodos para cuantificar la fibra soluble y los efectos de las fracciones de fibra y las fuentes de fibra sobre la digestión de las diferentes fracciones de fibra (soluble e insoluble) en el conejo. Hay un efecto positivo de la fibra soluble sobre la salud intestinal de los conejos y, por ende, una reducción de la mortalidad en animales destetados. Pese a esto, no está claro si estos efectos se deben específicamente a la fracción soluble. Por lo que los objetivos generales de esta tesis fueron: 1) comparar diferentes metodologías químicas e in vitro para cuantificar la fibra soluble y estudiar las posibles interferencias en la cuantificación de la fibra soluble por las mucinas, y viceversa, 2) determinar los efectos de la fibra, el lugar de fermentación, el método para valorar la fibra soluble e insoluble, y la corrección de la fibra soluble por el contenido intestinal de mucinas sobre la digestibilidad de las distintas fracciones de la fibra y 3) evaluar los efectos individuales de las fracciones soluble e insoluble de la fibra de pulpa de remolacha y de manzana, sobre la digestibilidad de la fibra soluble e insoluble y los parámetros digestivos. Para ello se llevaron a cabo 4 estudios. En el primer estudio se compararon diferentes metodologías químicas e in vitro para valorar la fibra soluble de diferentes alimentos y se estudió la posible interferencia en la determinación de la fibra soluble y mucinas. Para ello se utilizaron seis ingredientes (pulpa de remolacha, pectinas de pulpa de remolacha, pulpa de remolacha lavada, paja de cereal, cascarilla de girasol y lignocelulosa) y siete piensos de conejos con diferentes niveles de fibra soluble. En un primer experimento se analizó la fibra dietética total (FDT), la fibra dietética insoluble (FDI), la fibra dietética soluble (FDS), la fibra neutro detergente corregida por cenizas y proteínas (aFNDmo-pb), y la digestibilidad in vitro 2 pasos pepsina/pancreatina (residuo corregido por cenizas y proteína, ivMSi2) de los ingredientes y piensos. Además la fibra soluble se calculó mediante la diferencia entre FDT-FDI (FDSFDI), FDT- ivMSi2 (FDSivMSi2), y FDT - aFNDmo-pb (FDSaFNDmo-pb). Cuando la fibra soluble se determinó directamente como FDS o se calculó como FDT-FDI no se observaron diferencias (109 g/kg MS, en promedio). Sin embargo, cuando la fibra soluble se calculó como FDT - aFNDmo-pb su valor fue un 40% menor (153 g/kg MS. P < 0,05), mientras que la FDSFDI (124 g/kg MS) no fue diferente a ninguna de las otras metodologías. La correlación entre los tres métodos fue elevada (r > 0,96. P < 0,001. n = 13), pero disminuyó o incluso desapareció cuando la pulpa o las pectinas de la remolacha fueron excluidas del análisis. En un segundo experimento, se comparó el método ivDMi2 usando crisoles (método de referencia) con una modificación del mismo usando bolsas ANKOM digeridas individualmente o en colectivo para simplificar la determinación de la FDSivMSi2. La FDSivMSi2 no difirió entre los métodos comparados. En un tercer experimento, se analizó la posible interferencia entre la determinación de la fibra soluble y las mucinas intestinales. Se observó un contenido de FDT y de mucinas elevado en las muestras de pectinas de remolacha (994 y 709 g/kg MS), así como en el moco intestinal de conejo (571 y 739 g/kg MS) cuando se aplicó el método de mucinas por precipitación con etanol. Sin embargo, después de aplicar una pectinasa en el material precipitado, la cantidad de mucinas recuperadas en las muestras de pectinas de remolacha fue cercana a cero, mientras que en el moco intestinal fue similar a los resultados previos al uso de la enzima. Con los resultados de este ensayo se estimaron los carbohidratos de mucinas retenidos en los contenidos digestivos y se propuso una corrección para la determinación de la digestibilidad de la FDT y fibra soluble. En conclusión, la contaminación de las mucinas de la digesta con fibra soluble se soluciona usando pectinasas. El segundo estudio se centró en estudiar: 1) el efecto del tipo de fibra, 2) el sitio de fermentación, 3) el método para cuantificar fibra y 4) la corrección por mucinas sobre la digestibilidad de la fibra. Para ello se formularon tres piensos con diferentes niveles de fibra soluble (FDT-aFNDmo-pb). Un pienso bajo en fibra soluble (LSF. 85 g/kg DM), un pienso medio en fibra soluble (MSF. 102 g/kg DM), y un pienso alto en fibra soluble (HSF. 145 g/kg DM). Estos piensos se obtuvieron reemplazando un 50% del heno del alfalfa en el pienso MSF por una mezcla de pulpa de manzana y remolacha (HSF) o por una mezcla de cascarilla de avena y proteína de soja (LSF). Se utilizaron 30 conejas canuladas para determinar la digestibilidad ileal y fecal. La digestibilidad cecal se calculó mediante diferencia entre la digestibilidad fecal e ileal. La fibra insoluble se determinó como aFNDmo-pb, IDF, e ivMSi2, mientras que la fibra soluble se calculó como FDSFDI, FDSaFNDmo-pb, y FDSivMSi2. La digestibilidad de la FDT y la fibra soluble se corrigieron por las mucinas. La concentración de mucinas en la digesta ileal y fecal, aumento desde el grupo LSF hasta el grupo con el pienso HSF (P < 0,01). La corrección por mucinas aumentó las digestibilidades de la FDT y la fibra soluble a nivel ileal, mientras que a nivel cecal las redujo. (P < 0.01). El coeficiente de digestibilidad ileal de FDT aumentó desde el grupo LSF al grupo HSF (0,12 vs. 0,281. P < 0,01), sin diferencias en el coeficiente de digestibilidad cecal (0,264), por lo que la tendencia a nivel fecal entre los grupos se mantuvo. El coeficiente de digestibilidad ileal de la fibra insoluble aumento desde el grupo con el pienso LSF al grupo con el pienso HSF (0,113 vs. 0,210. P < 0,01), sin diferencias a nivel cecal (0,139) y sin efecto del método usado, resultando en una digestibilidad elevada a nivel fecal, con tendencias similares a las observadas a nivel ileal. El coeficiente de digestibilidad de la FND fue elevada en comparación con la FDI o la ivMSi2 (P > 0.01). El coeficiente de la digestibilidad ileal de la fibra soluble fue mayor en el grupo LSF respecto al grupo LSF (0,436 vs. 0,145. P < 0,01) y el método no afectó a esta determinación. El coeficiente de la digestibilidad cecal de la fibra soluble se redujo desde el grupo LSF hasta el grupo HSF (0,721 vs. 0,492. P < 0,05). El valor más bajo de digestibilidad cecal y fecal de fibra soluble fue medido con el método FDSaFNDmo-pb (P < 0,01). Se observó una alta correlación entre las digestibilidades de la fibra soluble determinada como FDSFDI, FDSaFNDmo-pb, y FDSivMSi2, por lo tanto la información proporcionada por una u otra metodología fueron similares. Sin embargo, cuando se compararon con efectos fisiológicos (producción de mucinas y peso del ciego y pH del ciego de un trabajo previo), la FDSaFNDmo-pb globalmente mostró estar mejor correlacionado con estos parámetros fisiológicos. En conclusión, la corrección por mucinas es necesaria para determinar la digestibilidad ileal de la FDT y fibra soluble, mientras que la elección de uno u otro método es menos relevante. La inclusión de pulpa de manzana y remolacha incrementa la cantidad de FDT que desaparece antes de llegar al ciego. En el tercer estudio se estudió el efecto de la fracción fibrosa soluble e insoluble de la pulpa de remolacha y el método de cuantificación de la fibra soluble e insoluble sobre la digestibilidad de la fibra y algunos parámetros digestivos. Para ello se formularon cuatro piensos con niveles similares de fibra insoluble (315g aFNDmo-pb/kg MS) y proteína (167 g/kg MS). El pienso control contuvo el nivel más bajo de fibra soluble (30,3 g/kg, con cascarilla de girasol y paja como fuente de fibra). Un segundo pienso se obtuvo mediante la sustitución de 60 g de almidón/kg del pienso control por pectinas de remolacha (82,9 g fibra soluble/kg MS). Los otras dos piensos resultaron de la sustitución parcial de las fuentes de fibra del pienso control por la fracción insoluble de la pulpa de remolacha y la pulpa de remolacha entera (42.2 y 82.3 g fibra soluble/kg MS, respectivamente). Cincuenta y seis conejos en cebo (14/pienso), de 2,4  0.21 kg de peso, fueron usados para determinar la digestibilidad ileal y fecal de la FDT, FDI, aFNDmo-pb, FDSFDI, y FDSaFNDmo-pb. La concentración de mucinas en el íleon y heces se utilizaron para corregir la digestibilidad de la FDT y fibra soluble. También se midió el peso de diferentes segmentos del tracto digestivo y el pH del contenido digestivo. Los conejos alimentados con el pienso de fibra insoluble de pulpa de remolacha mostraron los consumos más bajos con respecto a los demás grupos (124 vs. 139 g/d, respectivamente. P < 0,05). El flujo de mucinas ileales fue más alto (P < 0.05) en el grupo alimentado con el pienso de pectinas de remolacha (9,0 g/d en promedio) que los del grupo control (4,79 g/d), mostrando los otros dos grupos valores intermedios, sin detectarse diferencias a nivel fecal. La digestibilidad ileal de la FDT (corregida por mucinas) y la fibra insoluble no se vieron afectadas por el tipo de pienso. El método usado para determinar la fibra insoluble afectó su digestibilidad ileal (0,123 para FDI vs. 0,108 para aFNDmo-pb. P < 0.01). De todas formas, los métodos no afectaron al cálculo de la fibra fermentada antes del ciego (4,9 g/d en promedio). Los conejos alimentados con el pienso de pulpa de remolacha y con el pienso con la fracción insoluble de la pulpa de remolacha mostraron las digestibilidades fecales más altas de la fibra insoluble (0,266 en promedio vs. 0,106 del grupo control), mientras que en los animales del pienso con pectinas esta digestibilidad fue un 47% mayor respecto al pienso control (P < 0,001). La digestibilidad fecal de la fibra insoluble fue un 20% más alta cuando se usó la FND en lugar de FDI para determinarla (P < 0.001). Esto hizo variar la cantidad de fibra insoluble fermentada a lo largo del tracto digestivo (9,5 ó 7,5 g/d cuando fue calculada como FDI o aFNDmo-pb, respectivamente. P < 0,001). Las digestibilidades ileales de la fibra soluble fueron positivas cuando los análisis de fibra soluble de los contenidos ileales fueron corregidos por mucinas, (P < 0,001) excepto para la digestibilidad ileal de la FDSIDF del grupo control. Una vez corregidas por mucinas, los conejos alimentados con los piensos que contuvieron la fracción soluble de la pulpa de remolacha (pienso de pectina y pulpa de remolacha) mostraron una mayor digestibilidad ileal de la fibra soluble, respecto al grupo control (0,483 vs. -0,010. P = 0.002), mientras que el grupo del pienso de fibra insoluble de pulpa de remolacha mostró un valor intermedio (0,274). La digestibilidad total de la fibra soluble fue similar entre todos los grupos (0.93). Los conejos alimentados con pulpa de remolacha y su fracción insoluble mostraron los pesos relativos más altos del estómago respecto a los del pienso control y de pectinas (11 y 56 % respectivamente; P < 0,05). Por otra parte, el peso relativo del ciego aumentó en los animales que consumieron tanto la fracción soluble como insoluble de la pulpa de remolacha, siendo un 16% más pesados (P < 0,001) que el grupo control. El pH del contenido cecal fue más bajo en los animales del grupo de pulpa de remolacha que en los del grupo control (5,64 vs. 6,03; P < 0,001), mientras que los del grupo de pectinas y de fibra insoluble de pulpa de remolacha mostraron valores intermedios. En conclusión, el efecto positivo de la pulpa de remolacha en el flujo de mucinas a nivel ileal se debe a la fracción soluble e insoluble de la pulpa de remolacha. La mitad de la fibra soluble de la pulpa de remolacha desaparece antes de llegar al ciego, independientemente si esta proviene de pectinas puras o de la pulpa de remolacha. El pH cecal esta mejor correlacionado con la cantidad de FDT que desaparece antes del ciego más que con la que se degrada en el ciego. En el último estudio se estudiaron los efectos de la fibra soluble e insoluble de la pulpa de manzana sobre la digestibilidad de la fibra y algunos parámetros digestivos. Cuatro dietas fueron formuladas con niveles similares de fibra insoluble (aFNDmo-pb 32,4%) y proteína (18,6% ambos en base seca). El pienso control contuvo el nivel más bajo de fibra soluble (46 g de fibra soluble/kg, con cascarilla de girasol y paja de cereales como la fuentes de fibra). Un segundo pienso fue obtenido mediante la sustitución de 60 g de almidón/kg del pienso control por pectinas de manzana (105 g fibra soluble/kg). Los otros dos piensos se obtuvieron por la substitución de parte de las fuentes de fibra del pienso control por pulpa de manzana o pulpa de manzana despectinizada (93 y 71 g de fibra soluble/kg, respectivamente). La digestibilidad fecal fue determinada en 23 conejos/pienso con 1.68 ± 0.23 kg de peso vivo, los cuales fueron sacrificados a los 60 d edad para recolectar su contenido digestivo para determinar digestibilidad ileal y otros parámetros digestivos. La fibra soluble de manzana (pectinas y pulpa entera) estimuló el flujo ileal de mucinas (P = 0,002), pero no asi la pulpa despectinizada. La corrección por mucinas incrementó la digestibilidad de la FDT y la fibra soluble a nivel fecal, y especialmente a nivel ileal. Cerca de la mitad de la fibra soluble proveniente de los piensos con cualquiera de las fracciones de la pulpa de manzana fue degradada a nivel ileal, sin mostrar diferencias entre los grupos (46 y 86% en promedio a nivel ileal y fecal respectivamente). La inclusión de pulpa despectinizada de manzana mejoró la digestibilidad de la FND a nivel fecal (P < 0,05) pero no a nivel ileal. El contenido cecal de los conejos alimentados con la pulpa de manzana tuvieron el pH cecal más ácido que los del pienso control (5,55 vs. 5,95. P < 0,001), mientras que los animales con el pienso de pectinas de manzana y de pulpa de manzana despectinizada mostraron valores intermedios. En conclusión los efectos positivo de la pulpa de manzana en el flujo de mucinas se debió principalmente a la fracción soluble de la pulpa de manzana. La mitad de la fibra soluble fue degradada antes del ciego independientemente de si esta provino de las pectinas o de la pulpa de manzana. El pH cecal estuvo mejor correlacionado con la cantidad de FDT fermentada en todo el tracto digestivo y antes de llegar al ciego que con la que se degradó en el ciego. Al integrar los resultados de los estudio 2, 3 y 4 se concluyó que la corrección de mucinas de los contenidos digestivos al determinar FDT y fibra soluble es necesaria para ajustar los cálculos de su digestibilidad. Esta corrección es mucho más importante a nivel ileal y en dietas bajas en fibra soluble. Por otra parte, la FDT desapareció en proporciones importantes antes de llegar al ciego, especialmente en piensos que contienen pulpa de remolacha o de manzana o alguna fracción soluble o insoluble de las mismas y estas diferencias observadas entre los piensos a nivel ileal se correlacionaron mejor con el pH cecal, lo que indicaría que la FDT se solubilizó antes de llegar al ciego y una vez en esté fermentó. Estos resultados implican que determinar la fibra soluble como FDSaFNDmo-pb es la mejor opción y que en la determinación de la digestibilidad de la FDT y fibra soluble se debe considerar la corrección por mucinas especialmente a nivel ileal y en piensos bajos en fibra soluble. ABSTRACT The present thesis constitutes a step forward in advancing the knowledge of the methods to quantify soluble fibre and the effects of the fibre fractions and source of fibre on the site the digestion of different fractions of fibre (soluble and insoluble) in the rabbit. There is a positive effect of soluble fibre on rabbit digestive health and therefore on the reduction of mortality in weaning rabbits. Nevertheless, it is no so clear that the effects of soluble fibre on rabbits are due particularly to this fraction. This thesis aims: 1) to compare the quantification of soluble fibre in feeds using different chemical and in vitro approaches, and to study the potential interference between soluble fibre and mucin determinations, 2) to identify the effects of type of fibre, site of fermentation, method to quantify insoluble and soluble fibre, and correction of the intestinal soluble fibre content for intestinal mucin on the digestibility of fibre fractions and 3) to evaluate the individual effect of soluble and insoluble fibre from sugar beet pulp and apple pulp on ileal and faecal soluble and insoluble digestibility and digestive traits. These objectives were developed in four studies: The first study compared the quantification of soluble fibre in feeds using different chemical and in vitro approaches, and studied the potential interference between soluble fibre and mucin determinations. Six ingredients, sugar beet pulp (SBP), SBP pectins, insoluble SBP, wheat straw, sunflower hulls and lignocellulose, and seven rabbit diets, differing in soluble fibre content, were evaluated. In experiment 1, ingredients and diets were analysed for total dietary fibre (TDF), insoluble dietary fibre (IDF), soluble dietary fibre (SDF), aNDFom (corrected for protein, aNDFom-cp) and 2-step pepsin/pancreatin in vitro DM indigestibility (corrected for ash and protein, ivDMi2). Soluble fibre was estimated by difference using three procedures: TDF - IDF (SDFIDF), TDF - ivDMi2 (SDFivDMi2), and TDF - aNDFom-cp (SDFaNDFom-cp). Soluble fibre determined directly (SDF) or by difference, as SDFivDMi2 were not different (109 g/kg DM, on average). However, when it was calculated as SDFaNDFom-cp the value was 40% higher (153 g/kg DM, P < 0.05), whereas SDFIDF (124 g/kg DM) did not differ from any of the other methods. The correlation between the four methods was high (r ≥ 0.96. P ≤ 0.001. n = 13), but it decreased or even disappeared when SBP pectins and SBP were excluded and a lower and more narrow range of variation of soluble fibre was used. In experiment 2, the ivDMi2 using crucibles (reference method) were compared to those made using individual or collective ankom bags in order to simplify the determination of SDFivDMi2. The ivDMi2 was not different when using crucibles or individual or collective ankom bags. In experiment 3, the potential interference between soluble fibre and intestinal mucin determinations was studied using rabbit intestinal raw mucus, digesta and SBP pectins, lignocelluloses and a rabbit diet. An interference was observed between the determinations of soluble fibre and crude mucin, as the content of TDF and apparent crude mucin were high in SBP pectins (994 and 709 g/kg DM) and rabbit intestinal raw mucus (571 and 739 g/kg DM). After a pectinase treatment, the coefficient of apparent mucin recovery of SBP pectins was close to zero, whereas that of rabbit mucus was not modified. An estimation of the crude mucin carbohydrates retained in digesta TDF is proposed to correct TDF and soluble fibre digestibility. In conclusion, the values of soluble fibre depend on the methodology used. The contamination of crude mucin with soluble fibre is avoided using pectinase. The second study focused on the effect of type of fibre, site of fermentation, method for quantifying insoluble and soluble dietary fibre, and their correction for intestinal mucin on fibre digestibility. Three diets differing in soluble fibre were formulated (85 g/kg DM soluble fibre, in the low soluble fibre [LSF] diet; 102 g/kg DM in the medium soluble fibre [MSF] diet; and 145 g/kg DM in the high soluble fibre [HSF] diet). They were obtained by replacing half of the dehydrated alfalfa in the MSF diet with a mixture of beet and apple pulp (HSF diet) or with a mix of oat hulls and soybean protein (LSF diet). Thirty rabbits with ileal T-cannulas were used to determine total tract apparent digestibility (CTTAD) and ileal apparent digestibility (CIAD). Caecal digestibility was determined by difference between CTTAD and CIAD. Insoluble fibre was measured as aNDFom-cp, IDF, and ivDMi2, whereas soluble fibre was calculated as SDFaNDFom-cp, SDFIDF, SDFivDMi2. The intestinal mucin content was used to correct the TDF and soluble fibre digestibility. Ileal and faecal concentration of mucin increased from the LSF to the HSF diet group (P < 0.01). Once corrected for intestinal mucin, The CTTAD and CIAD of TDF and soluble fibre increased whereas caecal digestibility decreased (P < 0.01). The CIAD of TDF increased from the LSF to the HSF diet group (0.12 vs. 0.281. P < 0.01), with no difference in the caecal digestibility (0.264), resulting in a higher CTTAD from the LSF to the HSF diet group (P < 0.01). The CIAD of insoluble fibre increased from the LSF to the HSF diet group (0.113 vs. 0.21. P < 0.01), with no difference in the caecal digestibility (0.139) and no effect of fibre method, resulting in a higher CTTAD for rabbits fed the HSF diet compared with the MSF and LSF diets groups (P < 0.01). The CTTAD of aNDFom-cp was higher compared with IDF or ivDMi2 (P < 0.01). The CIAD of soluble fibre was higher for the HSF than for the LSF diet group (0.436 vs. 0.145. P < 0.01) and fibre method did not affect it. Caecal soluble fibre digestibility decreased from the LSF to the HSF diet group (0.721 vs. 0.492. P < 0.05). The lowest caecal and faecal soluble fibre digestibility was measured using SDFaNDFom-cp (P < 0.01). There was a high correlation among the digestibilities of soluble fibre measured as SDFaNDFom-cp, SDFIDF, and SDFivDMi2. Therefore, these methodologies provide similar information. However, the method that seems to be globally better related to the physiological traits (ileal flow of mucins, and relative weight of the caecum and caecal pH from previous work) was the SDFaNDFom-cp. In conclusion, a correction for intestinal mucin is necessary for ileal TDF and soluble fibre digestibility whereas the selection of the fibre method has a minor relevance. The inclusion of sugar beet and apple pulp increased the amount of TDF fermented in the small intestine. The third study examined the effect of fibre fractions of sugar beet pulp (SBP) and the method for quantifying soluble and insoluble fibre on soluble and insoluble fibre digestibility and digestive traits. Four diets were formulated with similar level of insoluble fibre (aNDFom-cp: 315 g/kg DM) and protein (167 g/kg DM). Control diet contained the lowest level of soluble fibre (30.3 g/kg DM, including sunflower hulls and straw as sole sources of fibre). A second diet was obtained by replacing 60 g starch/kg of control diet with SBP pectins (82.9 g soluble fibre/kg DM). Two more diets were obtained by replacing part of the fibrous sources of the control diet with either insoluble SBP fibre or SBP (42.2 and 82.3 g soluble fibre/kg DM, respectively). Fifty six (14/diet) rabbits weighing 2.40  0.213 kg were used to determine faecal and ileal digestibility of total dietary fibre (TDF), insoluble dietary fibre (IDF), neutral detergent fibre corrected for ash and CP (aNDFom-cp) and soluble fibre estimated as SDFaNDFom-cp and SDFIDF. Faecal and ileal mucin content was used to correct TDF and soluble fibre digestibility. It was also recorded weight of digestive segments and digesta pH. Rabbits fed insoluble SBP showed the lowest feed intake with respect to the other 3 diets (124 vs. 139 g/d, respectively. P < 0.05). Ileal mucin flow was higher (P < 0.05) in animals fed pectin and SBP diets (9.0 g/d, as average) than those fed control diet (4.79 g/d), showing InsSBP group an intermediate value. No differences on mucin content were detected at faecal level. There was no diet effect on the CIAD of TDF (corrected for mucin) and insoluble fibre. Fibre methodology influenced the CIAD of insoluble fibre (0.123 for IDF vs. 0.108 for aNDFom-cp. P < 0.01). Anyway, the amount of insoluble fibre fermented before the caecum did not differ between both methods (4.9 g/d, on average). Rabbits fed insoluble SBP and SBP diets showed the highest CTTAD of insoluble fibre (0.266 on average vs. 0.106 for control group), whereas those fed pectin diet had an intermediate value (0.106. P < 0.001). The CTTAD of insoluble fibre measured with IDF was higher than that measured with aNDFom-cp (by 20%. P < 0.001). It led that the amount of insoluble fibre fermented along the digestive tract were different (9.5 or 7.5 g/d when calculated as IDF or aNDFom-cp, respectively; P < 0.001). When the CIAD of soluble fibre was corrected for mucin they became positive (P < 0.001) except for control group measured as SDFIDF. Once corrected for mucin content, rabbits fed soluble fibre from SBP (pectin and SBP groups) showed higher CIAD of soluble fibre than control group (0.483 vs. -0.019. respectively), whereas the value for insoluble SBP group was intermediate 0.274. The CTTAD of soluble fibre (mucin corrected) was similar among diets 0.93. Rabbits fed with SBP and insoluble SBP diets showed higher total digestive tract and stomach relative weight than those fed pectin and control diets (by 11 and 56 %. respectively, P < 0.05). The caecal relative weight did not differ in rabbits fed pectin, insoluble SBP, and SBP diets (62 g/kg BW, as average) and they were on average 16% higher (P < 0.001) than in control group. Caecal content of rabbits fed SBP diet was more acid than those fed control diet (5.64 vs. 6.03. P < 0.001), whereas those from pectin and insoluble SBP diets showed intermediate values. In conclusion, the positive effect of SBP fibre on ileal mucin flow was due to both its soluble and insoluble fibre fraction. Half of the soluble SBP fibre was degraded before the caecum independently it came from pectin or SBP. The caecal pH correlated better with the ileal amount of fermented TDF in the digestive tract rather than with that fermented in the caecum. The last study examined the effect of soluble and insoluble fibre of apple pulp on fibre digestibility and digestive traits. Four diets were formulated with similar level of insoluble fibre (aNDFom-cp: 324 g/kg DM) and protein (18.6 g/kg DM). Control diet contained the lowest level of soluble fibre (46 g soluble fibre/kg DM, including oat hulls and straw as sole sources of fibre). A second diet was obtained by replacing 60 g starch/kg of control diet with apple pectins (105 g soluble fibre/kg DM). Two more diets were obtained by substituting part of the fibrous sources of the control diet by either apple pulp or depectinized apple pulp (93 and 71 g soluble fibre/kg, respectively). The CTTAD was determined in 23 rabbits/diet weighing 1.68  0.23 kg BW, and 23 rabbits/diet were slaughtered at 60 d of age to collect ileal digesta to determine CIAD and record other digestive traits. Soluble fibre from apple stimulated ileal flow of mucin (P = 0.002), but depectinized apple pulp did not. The correction for mucin increased the digestibility of crude protein, total dietary fibre, and soluble fibre at faecal, but especially at ileal level, depending in this case on the diet. Around half of the soluble fibre in diets containing any fibre fraction from apple was degraded at ileal level, with no differences among these diets (0.46 vs. 0.066 for control group, P=0.046). Faecal soluble fibre digestibility was 0.86 on average for all groups). Inclusion of the apple insoluble fibre improved NDF digestibility at faecal (0.222 vs. 0.069. P < 0.05) but not at ileal level. Caecal content of rabbits fed apple pulp diet was more acid than those fed control diet (5.55 vs. 5.95. P < 0.001), whereas those from pectin and depectinised apple pulp diets showed intermediate values. In conclusion, the positive effect of apple fibre on ileal mucin flow was mainly due to its soluble fibre fraction. Half of the soluble apple fibre was degraded before the caecum independently it came from pectin or apple pulp. The caecal pH correlated better with the total and ileal amount of fermented TDF in the digestive tract rather than with that fermented in the caecum. The results obtained in the studies 2, 3 and 4 were considered together. These results showed that the mucin correction is necessary when the TDF and soluble fibre digestibility is determined, and it correction is more important at ileal level and in diets with low level of soluble fibre. On another hand, incrementing the soluble fibre using sugar beet and apple pulp increased the amount of TDF disappear before the caecum. Moreover, the caecal pH correlated better with the ileal amount of fermented TDF in the digestive tract rather than with that fermented in the caecum. This suggests that an ileal fibre solubilisation may occur rather than ileal fermentation. Therefore the implications of this work were that: the estimation of soluble fibre as SDFaNDFom-cp is an adequate method considering its correlation with the physiological effects; and the TDF and soluble fibre digestibility must be corrected with intestinal mucins, especially when the ileal digestibility is determined.

Differences in water release for the binding of EcoRI to specific and nonspecific DNA sequences.

The free energy difference between complexes of the restriction nuclease EcoRI with nonspecific DNA and with the enzyme's recognition sequence is linearly dependent on the water chemical potential of the solution, set using several very different solutes, ranging from glycine and glycerol to triethylene glycol and sucrose. This osmotic dependence indicates that the nonspecific complex sequesters some 110 waters more than the specific complex with the recognition sequence. The insensitivity of the difference in number of waters released to the solute identity further indicates that this water is sequestered in a space that is sterically inaccessible to solutes, most likely at the protein-DNA interface of the nonspecific complex. Calculations based on the structure of the specific complex suggest that the apposing DNA and protein surfaces in the nonspecific complex retain approximately a full hydration layer of water.

An Empirical Comparison of Reuse in Embedded and Nonembedded Systems

High-quality software, delivered on time and budget, constitutes a critical part of most products and services in modern society. Our government has invested billions of dollars to develop software assets, often to redevelop the same capability many times. Recognizing the waste involved in redeveloping these assets, in 1992 the Department of Defense issued the Software Reuse Initiative. The vision of the Software Reuse Initiative was "To drive the DoD software community from its current "re-invent the software" cycle to a process-driven, domain-specific, architecture-centric, library-based way of constructing software.'' Twenty years after issuing this initiative, there is evidence of this vision beginning to be realized in nonembedded systems. However, virtually every large embedded system undertaken has incurred large cost and schedule overruns. Investigations into the root cause of these overruns implicates reuse. Why are we seeing improvements in the outcomes of these large scale nonembedded systems and worse outcomes in embedded systems? This question is the foundation for this research. The experiences of the Aerospace industry have led to a number of questions about reuse and how the industry is employing reuse in embedded systems. For example, does reuse in embedded systems yield the same outcomes as in nonembedded systems? Are the outcomes positive? If the outcomes are different, it may indicate that embedded systems should not use data from nonembedded systems for estimation. Are embedded systems using the same development approaches as nonembedded systems? Does the development approach make a difference? If embedded systems develop software differently from nonembedded systems, it may mean that the same processes do not apply to both types of systems. What about the reuse of different artifacts? Perhaps there are certain artifacts that, when reused, contribute more or are more difficult to use in embedded systems. Finally, what are the success factors and obstacles to reuse? Are they the same in embedded systems as in nonembedded systems? The research in this dissertation is comprised of a series of empirical studies using professionals in the aerospace and defense industry as its subjects. The main focus has been to investigate the reuse practices of embedded systems professionals and nonembedded systems professionals and compare the methods and artifacts used against the outcomes. The research has followed a combined qualitative and quantitative design approach. The qualitative data were collected by surveying software and systems engineers, interviewing senior developers, and reading numerous documents and other studies. Quantitative data were derived from converting survey and interview respondents' answers into coding that could be counted and measured. From the search of existing empirical literature, we learned that reuse in embedded systems are in fact significantly different from nonembedded systems, particularly in effort in model based development approach and quality where the development approach was not specified. The questionnaire showed differences in the development approach used in embedded projects from nonembedded projects, in particular, embedded systems were significantly more likely to use a heritage/legacy development approach. There was also a difference in the artifacts used, with embedded systems more likely to reuse hardware, test products, and test clusters. Nearly all the projects reported using code, but the questionnaire showed that the reuse of code brought mixed results. One of the differences expressed by the respondents to the questionnaire was the difficulty in reuse of code for embedded systems when the platform changed. The semistructured interviews were performed to tell us why the phenomena in the review of literature and the questionnaire were observed. We asked respected industry professionals, such as senior fellows, fellows and distinguished members of technical staff, about their experiences with reuse. We learned that many embedded systems used heritage/legacy development approaches because their systems had been around for many years, before models and modeling tools became available. We learned that reuse of code is beneficial primarily when the code does not require modification, but, especially in embedded systems, once it has to be changed, reuse of code yields few benefits. Finally, while platform independence is a goal for many in nonembedded systems, it is certainly not a goal for the embedded systems professionals and in many cases it is a detriment. However, both embedded and nonembedded systems professionals endorsed the idea of platform standardization. Finally, we conclude that while reuse in embedded systems and nonembedded systems is different today, they are converging. As heritage embedded systems are phased out, models become more robust and platforms are standardized, reuse in embedded systems will become more like nonembedded systems.

The gender differences in health effects of environmental cadmium exposure and potential mechanisms

On a viewpoint of gender differences in Cd body burden and its health effects, we reviewed the population- based research including our own which conducted in Japan, Thailand, Australia, Poland, Belgium and Sweden to assess health effects of human exposure to environmental cadmium and their potential mechanisms. As a result, six risk factors in Cd health effects in women have been identified; ( 1) more serious type of renal tubular dysfunction, ( 2) difference in calcium metabolism and its regulatory hormones, ( 3) kidney sensitivity; difference in P450 phenotype, ( 4) pregnancy, ( 5) body iron store status, and ( 6) genetic factors. Further studies of Cd toxicity targeted to women would now appear necessary.

Statistical modeling and projections of lung cancer mortality in 4 industrialized countries

The purpose of this work was to model lung cancer mortality as a function of past exposure to tobacco and to forecast age-sex-specific lung cancer mortality rates. A 3-factor age-period-cohort (APC) model, in which the period variable is replaced by the product of average tar content and adult tobacco consumption per capita, was estimated for the US, UK, Canada and Australia by the maximum likelihood method. Age- and sex-specific tobacco consumption was estimated from historical data on smoking prevalence and total tobacco consumption. Lung cancer mortality was derived from vital registration records. Future tobacco consumption, tar content and the cohort parameter were projected by autoregressive moving average (ARIMA) estimation. The optimal exposure variable was found to be the product of average tar content and adult cigarette consumption per capita, lagged for 2530 years for both males and females in all 4 countries. The coefficient of the product of average tar content and tobacco consumption per capita differs by age and sex. In all models, there was a statistically significant difference in the coefficient of the period variable by sex. In all countries, male age-standardized lung cancer mortality rates peaked in the 1980s and declined thereafter. Female mortality rates are projected to peak in the first decade of this century. The multiplicative models of age, tobacco exposure and cohort fit the observed data between 1950 and 1999 reasonably well, and time-series models yield plausible past trends of relevant variables. Despite a significant reduction in tobacco consumption and average tar content of cigarettes sold over the past few decades, the effect on lung cancer mortality is affected by the time lag between exposure and established disease. As a result, the burden of lung cancer among females is only just reaching, or soon will reach, its peak but has been declining for I to 2 decades in men. Future sex differences in lung cancer mortality are likely to be greater in North America than Australia and the UK due to differences in exposure patterns between the sexes. (c) 2005 Wiley-Liss, Inc.

Population differences in finger-length ratios: Ethnicity or latitude?

The relative length of the second and fourth fingers (the 2D:4D ratio) has been taken to be an indicator of prenatal exposure to testosterone, and hence possibly relevant to sexual orientation and other sex-differentiated behaviors. Studies have reported a difference in this ratio between Caucasian males in Britain and in the U.S.: higher average 2D:4D ratios were obtained in Britain. This raises the question of whether differences among different Caucasian gene pools were responsible or whether some environmental variable associated with latitude might be involved (e.g., exposure to sunlight or different day-length patterns). This question was explored by examining 2D:4D ratios for an Australian adolescent sample. The Australians were predominantly of British ancestry, but lived at distances from the equator more like those of the U.S. studies. The Australian 2D:4D ratios resembled those in Britain rather than those in the U.S., tending to exclude hypotheses related to latitude and making differences in gene pools a plausible explanation.

Ethnic differences in health related quality of life for patients with type 2 diabetes

Background - The objective of this study was to investigate the association between ethnicity and health related quality of life (HRQoL) in patients with type 2 diabetes. Methods - The EuroQol EQ-5D measure was administered to 1,978 patients with type 2 diabetes in the UK Asian Diabetes Study (UKADS): 1,486 of south Asian origin (Indian, Pakistani, Bangladeshi or other south Asian) and 492 of white European origin. Multivariate regression using ordinary least square (OLS), Tobit, fractional logit and Censored Least Absolutes Deviations estimators was used to estimate the impact of ethnicity on both visual analogue scale (VAS) and utility scores for the EuroQol EQ-5D. Results - Mean EQ-5D VAS and utility scores were lower among south Asians with diabetes compared to the white European population; the unadjusted effect on the mean EQ-5D VAS score was −7.82 (Standard error [SE] = 1.06, p < 0.01) and on the EQ-5D utility score was −0.06 (SE = 0.02, p < 0.01) (OLS estimator). After controlling for socio-demographic and clinical confounders, the adjusted effect on the EQ-5D VAS score was −9.35 (SE = 2.46, p < 0.01) and on the EQ-5D utility score was 0.06 (SE = 0.04), although the latter was not statistically significant. Conclusions - There was a large and statistically significant association between south Asian ethnicity and lower EQ-5D VAS scores. In contrast, there was no significant difference in EQ-5D utility scores between the south Asian and white European sub-groups. Further research is needed to explain the differences in effects on subjective EQ-5D VAS scores and population-weighted EQ-5D utility scores in this context.