Influence of microstructure variability on short crack growth behavior

Fatigue life in metals is predicted utilizing regression analysis of large sets of experimental data, thus representing the material’s macroscopic response. Furthermore, a high variability in the short crack growth (SCG) rate has been observed in polycrystalline materials, in which the evolution and distributionof local plasticity is strongly influenced by the microstructure features. The present work serves to (a) identify the relationship between the crack driving force based on the local microstructure in the proximity of the crack-tip and (b) defines the correlation between scatter observed in the SCG rates to variability in the microstructure. A crystal plasticity model based on the fast Fourier transform formulation of the elasto-viscoplastic problem (CP-EVP-FFT) is used, since the ability to account for the both elastic and plastic regime is critical in fatigue. Fatigue is governed by slip irreversibility, resulting in crack growth, which starts to occur during local elasto-plastic transition. To investigate the effects of microstructure variability on the SCG rate, sets of different microstructure realizations are constructed, in which cracks of different length are introduced to mimic quasi-static SCG in engineering alloys. From these results, the behavior of the characteristic variables of different length scale are analyzed: (i) Von Mises stress fields (ii) resolved shear stress/strain in the pertinent slip systems, and (iii) slip accumulation/irreversibilities. Through fatigue indicator parameters (FIP), scatter within the SCG rates is related to variability in the microstructural features; the results demonstrate that this relationship between microstructure variability and uncertainty in fatigue behavior is critical for accurate fatigue life prediction.

Fatigue Crack Propagation in Pressurized metallic Fuselages

On the basis of well-known literature, an analytical tool named LEAF (Linear Elastic Analysis of Fracture) was developed to predict the Damage Tolerance (DT) proprieties of aeronautical stiffened panels. The tool is based on the linear elastic fracture mechanics and the displacement compatibility method. By means of LEAF, an extensive parametric analysis of stiffened panels, representative of typical aeronautical constructions, was performed to provide meaningful design guidelines. The effects of riveted, integral and adhesively bonded stringers on the fatigue crack propagation performances of stiffened panels were investigated, as well as the crack retarder contribution using metallic straps (named doublers) bonded in the middle of the stringers bays. The effect of both perfectly bonded and partially debonded doublers was investigated as well. Adhesively bonded stiffeners showed the best DT properties in comparison with riveted and integral ones. A great reduction of the skin crack growth propagation rate can be achieved with the adoption of additional doublers bonded between the stringers.

Laser shock peening treatment to control and moderate fatigue crack growth in aircraft structure based on residual stress engineering approach

Laser Shock Peening (LSP) is a surface enhancement treatment which induces a significant layer of beneficial compressive residual stresses of up to several mm underneath the surface of metal components in order to improve the detrimental effects of the crack growth behavior rate in it. The aim of this thesis is to predict the crack growth behavior in metallic specimens with one or more stripes which define the compressive residual stress area induced by the Laser Shock Peening treatment. The process was applied as crack retardation stripes perpendicular to the crack propagation direction with the object of slowing down the crack when approaching the peened stripes. The finite element method has been applied to simulate the redistribution of stresses in a cracked model when it is subjected to a tension load and to a compressive residual stress field, and to evaluate the Stress Intensity Factor (SIF) in this condition. Finally, the Afgrow software is used to predict the crack growth behavior of the component following the Laser Shock Peening treatment and to detect the improvement in the fatigue life comparing it to the baseline specimen. An educational internship at the “Research & Technologies Germany – Hamburg” department of AIRBUS helped to achieve knowledge and experience to write this thesis. The main tasks of the thesis are the following: •To up to date Literature Survey related to “Laser Shock Peening in Metallic Structures” •To validate the FE model developed against experimental measurements at coupon level •To develop design of crack growth slowdown in Centered Cracked Tension specimens based on residual stress engineering approach using laser peened strip transversal to the crack path •To evaluate the Stress Intensity Factor values for Centered Cracked Tension specimens after the Laser Shock Peening treatment via Finite Element Analysis •To predict the crack growth behavior in Centered Cracked Tension specimens using as input the SIF values evaluated with the FE simulations •To validate the results by means of experimental tests

Effect of Laser Shock Peening on Fatigue Crack Propagation of Aeronautical Structures

Laser Shock Peening (LSP) is a surface enhancement treatment which induces a significant layer of beneficial compressive residual stresses up to several mm underneath the surface of metal components in order to improve the detrimental effects of crack growth behavior rate in it. The aim of this thesis is to predict the crack growth behavior of thin Aluminum specimens with one or more LSP stripes defining a compressive residual stress area. The LSP treatment has been applied as crack retardation stripes perpendicular to the crack growing direction, with the objective of slowing down the crack when approaching the LSP patterns. Different finite element approaches have been implemented to predict the residual stress field left by the laser treatment, mostly by means of the commercial software Abaqus/Explicit. The Afgrow software has been used to predict the crack growth behavior of the component following the laser peening treatment and to detect the improvement in fatigue life comparing to the specimen baseline. Furthermore, an analytical model has been implemented on the Matlab software to make more accurate predictions on fatigue life of the treated components. An educational internship at the Research and Technologies Germany- Hamburg department of Airbus helped to achieve knowledge and experience to write this thesis. The main tasks of the thesis are the following: -To up to date Literature Survey related to laser shock peening in metallic structures -To validate the FE models developed against experimental measurements at coupon level -To develop design of crack growth slow down in centered and edge cracked tension specimens based on residual stress engineering approach using laser peened patterns transversal to the crack path -To predict crack growth behavior of thin aluminum panels -To validate numerical and analytical results by means of experimental tests.

Interazione tra squalo bianco (Carcharadon carcharias) e otaria orsina del Capo (Arctocephalus pusillus pusillus) nell'area di Seal Island a Mossel Bay, Sud Africa.

Gli squali bianchi sono tra i più importanti predatori dei Pinnipedi (Klimley et al., 2001; Kock, 2002). La loro principale strategia di caccia consiste nel pattugliare le acque circostanti ad una colonia di otarie e nell’attaccarle quando queste sono in movimento, mentre si allontanano o avvicinano all’isola (Klimley et al., 2001; Kock, 2002). Tuttavia, la strategia e la dinamica della predazione osservate anche in relazione al ciclo riproduttivo della preda e le tattiche comportamentali messe in atto dalla preda per ridurre la probabilità di predazione, e quindi diminuire la sua mortalità, sono ancora poco conosciute. Con questo studio, effettuato nell’area di Seal Island all’interno della baia di Mossel Bay in Sud Africa, abbiamo cercato di definire proprio questi punti ancora poco conosciuti. Per studiare la strategia e le dinamica di predazione dello squalo bianco abbiamo utilizzato il sistema di monitoraggio acustico, in modo da poter approfondire le conoscenze sui loro movimenti e quindi sulle loro abitudini. Per dare un maggiore supporto ai dati ottenuti con la telemetria acustica abbiamo effettuato anche un monitoraggio visivo attraverso l’attrazione (chumming) e l’identificazione fotografica degli squali bianchi. Per comprendere invece i loro movimenti e le tattiche comportamentali messi in atto dalle otarie orsine del capo per ridurre la probabilità di predazione nella baia di Mossel Bay, abbiamo utilizzato il monitoraggio visivo di 24 ore, effettuato almeno una volta al mese, dalla barca nell’area di Seal Island. Anche se gli squali bianchi sono sempre presenti intorno all’isola i dati ottenuti suggeriscono che la maggior presenza di squali/h si verifica da Maggio a Settembre che coincide con l’ultima fase di svezzamento dei cuccioli delle otarie del capo, cioè quando questi iniziano a foraggiare lontano dall'isola per la prima volta; durante il sunrise (alba) durante il sunset (tramonto) quando il livello di luce ambientale è bassa e soprattutto quando la presenza delle prede in acqua è maggiore. Quindi possiamo affermare che gli squali bianchi a Seal Island prendono delle decisioni che vanno ad ottimizzare la loro probabilità di catturare una preda. I risultati preliminari del nostro studio indicano anche che il numero di gruppi di otarie in partenza dall'isola di notte sono di gran lunga maggiori di quelle che partono durante il giorno, forse questo potrebbe riflettere una diminuzione del rischio di predazione; per beneficiare di una vigilanza condivisa, le otarie tendono in media a formare gruppi di 3-5 o 6-9 individui quando si allontanano dall’isola e questo probabilmente le rende meno vulnerabili e più attente dall’essere predate. Successivamente ritornano all’isola da sole o in piccoli gruppi di 2 o 3 individui. I gruppi più piccoli probabilmente riflettono la difficoltà delle singole otarie a riunirsi in gruppi coordinati all'interno della baia.

Gunshot energy transfer profile in ballistic gelatine, determined with computed tomography using the total crack length method

By measuring the total crack lengths (TCL) along a gunshot wound channel simulated in ordnance gelatine, one can calculate the energy transferred by a projectile to the surrounding tissue along its course. Visual quantitative TCL analysis of cut slices in ordnance gelatine blocks is unreliable due to the poor visibility of cracks and the likely introduction of secondary cracks resulting from slicing. Furthermore, gelatine TCL patterns are difficult to preserve because of the deterioration of the internal structures of gelatine with age and the tendency of gelatine to decompose. By contrast, using computed tomography (CT) software for TCL analysis in gelatine, cracks on 1-cm thick slices can be easily detected, measured and preserved. In this, experiment CT TCL analyses were applied to gunshots fired into gelatine blocks by three different ammunition types (9-mm Luger full metal jacket, .44 Remington Magnum semi-jacketed hollow point and 7.62 × 51 RWS Cone-Point). The resulting TCL curves reflected the three projectiles' capacity to transfer energy to the surrounding tissue very accurately and showed clearly the typical energy transfer differences. We believe that CT is a useful tool in evaluating gunshot wound profiles using the TCL method and is indeed superior to conventional methods applying physical slicing of the gelatine.

Complications associated with the arterial puncture closure device--Angio-Seal

BACKGROUND: Arterial puncture closure devices (APCD) are frequently used after cardiac catheterization. Here, the diagnosis and therapy of femoral artery complications after the use of the Angio-Seal APCD is reported. PATIENTS AND METHODS: The Angio-Seal APCD was deployed in 1600 patients undergoing transfemoral catheterization. RESULTS: In 7 of 1600 cases (0.4%) vascular complications occurred following Angio-Seal deployment. Diagnosis was made by duplex sonography. Intraoperative findings consisted of a complete occlusion with dissection of the femoral artery in all patients. In 6 cases, the femoral bifurcation had to be reconstructed after endarterectomy. Follow-up is complete with a mean of 6 months. CONCLUSION: The Angio-Seal device should not be used for closure of the superficial femoral artery and in patients with severe arteriosclerosis. The application of arteriography as well as the use of ultrasound-guided puncture is advisable. In all cases, surgical intervention was successful and an adequate therapy for management of complications.

Behavioral and psychosocial factors associated with sexual risk in a population of crack cocaine users

The purpose of this dissertation was to examine the relationship between key psychosocial and behavioral components of the Transtheoretical Model and the Theory of Reasoned Action for sexual risk reduction in a population of crack cocaine smokers and sex workers, not in drug treatment. ^ The first study examined the results of an analysis of the association between two principal constructs in the Transtheoretical Model, the processes of change and the stages of change for condom use, in a high risk population. In the analysis of variance for all respondents, the overall F-test revealed that people in different stages have different levels of experiential process use, F(3,317) = 17.79, p = 0.0001 and different levels of behavioral process use, F(3,317) = 28.59, p = .0001. For the experiential processes, there was a significant difference between the precontemplation/contemplation stage, and both the action, and maintenance, stages.^ The second study explored the relationship between the Theory of Reasoned Action “beliefs” and the stages-of-change in the same population. In the analysis of variance for all participants, the results indicate that people in different stages did value the positive beliefs differently, F(3,502) = 15.38, p = .0001 but did not value the negative beliefs differently, F(3,502) = 2.08, p = .10. ^ The third study explored differences in stage-of-change by gender, partner type drug use, and HIV status. Three discriminant functions emerged, with a combined χ2(12) = 139.57, p = <.0001. The loading matrix of correlations between predictors and discriminant functions demonstrate that the strongest predictor for distinguishing between the precontemplation/contemplation stage and the preparation, action, and maintenance stages (first function) is partner type (.962). The loadings on the second discriminant function suggest that once partner type has been accounted for, ever having HIV/AIDS (.935) was the best predictor for distinguishing between the first three stages and the maintenance stage. ^ These studies demonstrate that behavioral change theories can contribute important insight to researchers and program planners attempting to alter HIV risk behavior in high-risk populations. ^