A comparison of the relative toxicity of bone meal and other P sources used as remedial treatments to the earthworm Eisenia fetida

It has been suggested that sources of P could be used to remediate metal-contaminated soil. The toxicity of four potential P sources, potassium hydrogen phosphate (PHP), triple superphosphate (TSP), rock phosphate (RP) and raw bone meal (RBM) to Eisenia fetida was determined. The concentration of P that is statistically likely to kill 50% of the population (LC50) for PHP, TSP and RBM was determined in OECD acute toxicity tests. 14 day LC50s expressed as bulk P concentration lay in the range 3319–4272 mg kg−1 for PHP, 3107–3590 mg kg−1 for TSP and 1782–2196 mg kg−1 for RBM (ranges present the 95% confidence intervals). For PHP and TSP mortality was significantly impacted by the electrical conductivity of the treated soils. No consistent relationship existed between mortality and electrical conductivity, soil pH and available (Olsen) P across the PHP, TSP and RBM amendment types. In RP toxicity tests mortality was low and it was not possible to determine a LC50 value. Incineration of bone meal at temperatures between 200 and 300 ◦C, pre-washing the bone meal, co-amendment with 5% green waste compost and delaying introduction of earthworms after bone meal amendments by 21 days or more led to significant reductions in the bone meal toxicity. These results are consistent with the toxicity being associated with the release and/or degradation of a soluble organic component present in raw bone meal. Bone meal can be used as an earthworm-friendly remedial amendment in metal-contaminated soils but initial additions may have a negative effect on any earthworms surviving in the contaminated soil before the organic component in the bone meal degrades in the soil.

A comparison of the Thlaspi caerulescens and Thlaspi arvense shoot transcriptomes

Whole-genome transcriptome profiling is revealing how biological systems are regulated at the transcriptional level. This study reports the development of a robust method to profile and compare the transcriptomes of two nonmodel plant species, Thlaspi caerulescens, a zinc (Zn) hyperaccumulator, and Thlaspi arvense, a nonhyperaccumulator, using Affymetrix Arabidopsis thaliana ATH1-121501 GeneChip (R) arrays (Affymetrix, Santa Clara, CA, USA). Transcript abundance was quantified in the shoots of agar- and compost-grown plants of both species. Analyses were optimized using a genomic DNA (gDNA)-based probe-selection strategy based on the hybridization efficiency of Thlaspi gDNA with corresponding A. thaliana probes. In silico alignments of GeneChip (R) probes with Thlaspi gene sequences, and quantitative real-time PCR, confirmed the validity of this approach. Approximately 5000 genes were differentially expressed in the shoots of T. caerulescens compared with T. arvense, including genes involved in Zn transport and compartmentalization. Future functional analyses of genes identified as differentially expressed in the shoots of these closely related species will improve our understanding of the molecular mechanisms of Zn hyperaccumulation.

Distribution and availability of trace elements in municipal solid waste composts

Trace element contamination is one of the main problems linked to the quality of compost, especially when it is produced from urban wastes, which can lead to high levels of some potentially toxic elements such as Cu, Pb or Zn. In this work, the distribution and bioavailability of five elements (Cu, Zn, Pb, Cr and Ni) were studied in five Spanish composts obtained from different feedstocks (municipal solid waste, garden trimmings, sewage sludge and mixed manure). The five composts showed high total concentrations of these elements, which in some cases limited their commercialization due to legal imperatives. First, a physical fractionation of the composts was performed, and the five elements were determined in each size fraction. Their availability was assessed by several methods of extraction (water, CaCl2–DTPA, the PBET extract, the TCLP extract, and sodium pyrophosphate), and their chemical distribution was assessed using the BCR sequential extraction procedure. The results showed that the finer fractions were enriched with the elements studied, and that Cu, Pb and Zn were the most potentially problematic ones, due to both their high total concentrations and availability. The partition into the BCR fractions was different for each element, but the differences between composts were scarce. Pb was evenly distributed among the four fractions defined in the BCR (soluble, oxidizable, reducible and residual); Cu was mainly found in the oxidizable fraction, linked to organic matter, and Zn was mainly associated to the reducible fraction (iron oxides), while Ni and Cr were mainly present almost exclusively in the residual fraction. It was not possible to establish a univocal relation between trace elements availability and their BCR fractionation. Given the differences existing for the availability and distribution of these elements, which not always were related to their total concentrations, we think that legal limits should consider availability, in order to achieve a more realistic assessment of the risks linked to compost use.

Greenhouse gas emissions from waste management—assessment of quantification methods

Of the many sources of urban greenhouse gas (GHG) emissions, solid waste is the only one for which management decisions are undertaken primarily by municipal governments themselves and is hence often the largest component of cities’ corporate inventories. It is essential that decision-makers select an appropriate quantification methodology and have an appreciation of methodological strengths and shortcomings. This work compares four different waste emissions quantification methods, including Intergovernmental Panel on Climate Change (IPCC) 1996 guidelines, IPCC 2006 guidelines, U.S. Environmental Protection Agency (EPA) Waste Reduction Model (WARM), and the Federation of Canadian Municipalities- Partners for Climate Protection (FCM-PCP) quantification tool. Waste disposal data for the greater Toronto area (GTA) in 2005 are used for all methodologies; treatment options (including landfill, incineration, compost, and anaerobic digestion) are examined where available in methodologies. Landfill was shown to be the greatest source of GHG emissions, contributing more than three-quarters of total emissions associated with waste management. Results from the different landfill gas (LFG) quantification approaches ranged from an emissions source of 557 kt carbon dioxide equivalents (CO2e) (FCM-PCP) to a carbon sink of −53 kt CO2e (EPA WARM). Similar values were obtained between IPCC approaches. The IPCC 2006 method was found to be more appropriate for inventorying applications because it uses a waste-in-place (WIP) approach, rather than a methane commitment (MC) approach, despite perceived onerous data requirements for WIP. MC approaches were found to be useful from a planning standpoint; however, uncertainty associated with their projections of future parameter values limits their applicability for GHG inventorying. MC and WIP methods provided similar results in this case study; however, this is case specific because of similarity in assumptions of present and future landfill parameters and quantities of annual waste deposited in recent years being relatively consistent.

Organic contaminant content and physico-chemical characteristics of waste materials recycled in agriculture

A range of wastes representative of materials currently applied, or with future potential to be applied, to agricultural land in the UK as fertilisers and soil improvers or used as animal bedding in livestock production, were investigated. In addition to full physico-chemical characterization, the materials were analysed for a suite of priority organic contaminants. In general, contaminants were present at relatively low concentrations. For example, polychlorinated dibenzo-p-dioxins/dibenzofurans and polychlorinated biphenyls in biosolids and compost-like-outputs (CLOs) were, in most cases, between 5-50 times lower than proposed and implemented European limit values for biosolids or composts applied to agricultural land. However, the technical basis for these limits may need to be re-evaluated. Polybrominated, and mixed halogenated, dibenzo-p-dioxins/dibenzofurans are not currently considered in risk assessments of dioxins and dioxin-like chemicals, but were detected in the biosolids and compost-like-outputs and their potential contribution to the overall toxic equivalency will be assessed. Other, ‘emerging’ contaminants such as perfluoralkyl compounds (PFCs) and organophosphate flame retardants were detected in several of the waste materials, and their potential significance is discussed. The study is part of a wider research programme that will provide evidence to improve confidence in the use of waste-derived materials in agriculture and establish guidelines to protect the food chain where necessary.

Does fertilizer type and method of application cause significant differences in essential oil yield and composition in rosemary (Rosmarinus officinalis L.)?

Organic fertilizers based on seaweed extract potentially have beneficial effects on many crop plants. Herewe investigate the impact of organic fertilizer on Rosmarinus officinalis measured by both yield and oilquality. Plants grown in a temperature-controlled greenhouse with a natural photoperiod and a controlledirrigation system were treated with seaweed fertilizer and an inorganic fertilizer of matching mineralcomposition but with no organic content. Treatments were either by spraying on to the foliage or wateringdirect to the compost. The essential oil was extracted by hydro-distillation with a Clevenger apparatusand analysed by gas-chromatography mass-spectrometry (GC–MS) and NMR. The chemical composi-tions of the plants were compared, and qualitative differences were found between fertilizer treatmentsand application methods. Thus sprayed seaweed fertilizer showed a significantly higher percentage of�-pinene, �-phellandrene, �-terpinene (monoterpenes) and 3-methylenecycloheptene than other treat-ments. Italicene, �-bisabolol (sesquiterpenes), �-thujene, and E-isocitral (monoterpenes) occurred insignificantly higher percentages for plants watered with the seaweed extract. Each was significantly dif-ferent to the inorganic fertilizer and to controls. The seaweed treatments caused a significant increasein oil amount and leaf area as compared with both inorganic treatments and the control regardless ofapplication method.

Characterization of organic matter from composting of different residues by physicochemical and spectroscopic methods

Chemical and spectroscopic methods were used to characterize organic matter transformations during the composting process. Four different residue mixtures were studied: P1 - garden trimmings (GT) only, P2 - GT plus fresh cattle manure, P3 - GT plus orange pomace and P4 - GT plus filter cake. The thermophilic phase was not reached in PI compost, but the P2, P3 and P4 composts showed all three typical process phases. The thermophilic phase and CEC/C ratio stabilized after 90 days, while C/N ratio and the ash content stabilized after 60 days. The increasing E(4)/E(6) ratio indicated oxidation reactions occurring during the process in the material from P2, P3 and P4. The (13)C NMR and FTIR results suggested extraction of both pectin and lignin in the HA-like fraction. The CEC/C ratio, temperature and E(4)/E(6) ratio showed that within 90 days P2, P3 and P4 composts were humified. However, material from P1 did not show characteristics of humified compost. From these data, it is apparent that C/N ratio and ash content are not reliable methods for monitoring the composting process. (C) 2009 Elsevier Ltd. All rights reserved.

Mineralização de carbono e de nitrogênio provenientes de composto de lixo urbano em argissolo

Estudos da mineralização do C e do N em solos que receberam aplicação de composto de lixo urbano são importantes para avaliar o comportamento desse resíduo no solo e dar subsídios para definir as doses adequadas às culturas, com vistas em atender à necessidade de N das plantas. Foram realizados dois experimentos em condições de laboratório com o objetivo de avaliar a mineralização de C e de N em um Argissolo textura média adubado com composto de lixo urbano. No primeiro experimento, utilizou-se delineamento inteiramente ao acaso, com cinco tratamentos e três repetições, com os tratamentos constituídos de cinco doses de composto de lixo urbano, equivalentes a 0, 30, 60, 90 e 120 t ha-1. No segundo experimento, empregou-se esquema fatorial, com delineamento inteiramente ao acaso e três repetições, combinando as mesmas cinco doses de composto de lixo urbano utilizadas no primeiro experimento e 11 tempos de incubação (0, 7, 14, 28, 42, 56, 70, 84, 98, 112 e 126 dias). Os maiores aumentos de N-NO3- no solo foram obtidos até os 42 dias de incubação, independentemente da dose de composto de lixo aplicada, percebendo-se, a partir dos 70 dias, tendência de estabilização. A fração de mineralização de C-orgânico em C-CO2 menor do que 2 % em 168 dias indica que o composto de lixo urbano é material que contribui para aumentar os estoques de matéria orgânica do solo. Na ausência de adubação nitrogenada complementar, a fração de mineralização de N-orgânico de 12 % em 126 dias evidencia que o composto de lixo urbano apresenta potencial fertilizante de liberação lenta de N para as plantas.

Alterações nos atributos de fertilidade em solo adubado com composto de lixo urbano

O composto de lixo urbano é um adubo orgânico que vem sendo, com bastante freqüência, utilizado em áreas de produção de hortaliças. Assim, o objetivo deste trabalho foi avaliar o efeito da aplicação do composto de lixo urbano na fertilidade do solo, na produção de alface e no acúmulo de nutrientes nas plantas. O experimento foi realizado em casa de vegetação, em colunas de PVC, em delineamento em blocos ao acaso, com cinco tratamentos, doses de 0; 30; 60; 90 e 120 t ha-1 de composto de lixo urbano e oito repetições. As colunas receberam solo das profundidades de 0-20 (tratado com composto de lixo), 20-40 e 40-60 cm de um Argissolo, textura média, e uma muda de alface. Ao final do cultivo, colunas de quatro repetições de cada tratamento foram desmontadas e, nas demais colunas, fez-se um segundo cultivo de alface. A incorporação de composto de lixo urbano na profundidade de 0-20 cm melhorou a fertilidade do solo da própria camada em que foi aplicado e da camada de 20-40 cm, mas não alterou as características da camada de 40-60 cm. A adubação com composto de lixo urbano propiciou aumento do pH e dos teores de MO, P, K, Ca e Mg do solo, na camada de 0-20 cm, e de pH e Ca, na profundidade de 20-40 cm. A melhora da fertilidade do solo com a aplicação de composto de lixo urbano acarretou aumento de produção de alface e provocou maior acúmulo de P, K e Ca nas plantas.

Níveis de irrigação e de composto de lixo orgânico na formação de mudas cítricas em casa de vegetação

O presente trabalho visou a estudar o efeito da associação entre a irrigação e tipos de substratos na formação de mudas de laranjeira. O delineamento experimental utilizado foi o de blocos casualizados, com parcelas subdivididas, com quatro repetições, três níveis de irrigação e cinco tipos de substratos. Foram utilizados os seguintes substratos: 100% de casca de pínus; 80% de casca de pinus + 20% de composto de lixo orgânico; 60% de casca de pinus + 40% de composto de lixo orgânico; 20% de casca de pinus + 80% de composto de lixo orgânico, e 100% de composto de lixo orgânico. A irrigação por gotejamento foi feita com lâminas de 50%, 100% e 150% da evaporação do atmômetro modificado. A avaliação do desenvolvimento das plantas foi feita quinzenalmente, medindo-se o diâmetro do caule e a altura. Os resultados mostraram que as mudas de citrus apresentaram necessidade de água variável com os diferentes estádios de desenvolvimento e tipos de substratos, dos quais se destacou o substrato 3 (60% de casca de pinus e 40% de composto de lixo urbano), pois propiciou melhores condições para o desenvolvimento das raízes das plantas e também forneceu nutrientes, por meio da decomposição do material orgânico. A irrigação 3 (150% da evaporação do atmômetro) foi a que proporcionou o melhor desenvolvimento das mudas de laranjeira.

Biological control of Bradysia matogrossensis (Diptera : Sciaridae) in mushroom cultivation with predatory mites

Larvae of Sciaridae flies (Diptera) cause considerable damage to the mushroom Agaricus blazei (Murrill) ss. Heinemann in Brazil. Brazilian growers have had considerable difficulties in controlling this pest. The objective of this work was to test the effect of the predatory Laelapidae mite Stratiolaelaps scimitus (Womersley) as a control agent of Bradysia matogrossensis (Lane) in cultures of A. blazei. The work corresponded to an evaluation of the efficiency of that predator when released in boxes containing each about 15 L of commercial mushroom compost naturally infested with the pest. The results showed a significant effect of that predator on the population of B. matogrossensis. The release of either 665 or 1330 S. scimitus per box significantly reduced the pest population to levels that, according to grower's experience, apparently could not cause considerable damage. The positive results obtained warrant the conduction of complementary studies to determine the lowest rates of the predator that could still produce acceptable levels of control.

Seedlings production of Tabebuia heptaphylla in different substrates and levels of irrigation, in greenhouse conditions

The objective of this research was to evaluate the growth of Tabebuia heptaphylla seedlings in distinct substrates with different amounts of urban waste compost and the relation between this growth and irrigation. A completely randomized experimental design was used, with a factorial arrangement of 15 substrates and 2 irrigation levels. The substrates were composed by the combination of different materials: urban waste, tanned cattle manure, vermiculite, soil and the commercial form Plantmax (R). For the study of the seedlings development, the following characteristics were evaluated: plant height, stem diameter at soil level, number of leaves, above ground dry matter, root system dry matter, relation between plant height and stem base diameter, Dickson quality index and relation between plant height and above ground dry matter. Evaluations of plant height, stem diameter at soil level and number of leaves were made at 75, 90, 105, 120, 135 and 150 days after sowing. According to the results, it was concluded that urban waste compost does not increase plant development. Significant differences in relation to the irrigation levels were found, with better results for the 150% irrigation level compared to 100% evapotranspiration.

Adubação nitrogenada em cobertura e substratos na produção de mudas de mamoeiro 'Formosa'

Objetivando-se avaliar a produção de mudas de mamoeiro em diferentes substratos com adubações de nitrogênio em cobertura, conduziu-se um experimento em viveiro de formação de mudas no pomar da Universidade Federal de Lavras (UFLA), Minas Gerais. Foram testadas cinco doses de nitrogênio 0; 400; 800; 1600 e 3200 mg de N dm-3 de substrato, aplicados cinco vezes, sendo que em cada aplicação foram adicionados aos sacos de polietileno (capacidade de 500 mL) 20 mL de solução contendo o N e duas composições de substratos: A (composto orgânico + areia + solo na proporção de 1:1:3 em volume) e B (Plantmax® + areia + solo na proporção de 1:1:3 em volume). Foi utilizado o delineamento experimental em blocos ao acaso em esquema fatorial 5 x 2, com 4 repetições e cinco plantas por parcela. Após 150 dias da semeadura avaliaram-se as seguintes variáveis: comprimento da parte aérea (cm); comprimento de raiz (cm), número de folha/muda, matéria seca da parte aérea, da raiz e total (g/planta). Verificou-se que dosagem de até 1.800 mg de N dm-3 em cobertura, foram as que proporcionaram melhor qualidade na formação das mudas. em relação aos substratos verificou-se que o substrato B (Plantmax® + areia + solo na proporção de 1:1:3 em volume) foi o que promoveu os melhores resultados na produção das mudas do mamoeiro 'Formosa'.

Emergência e crescimento inicial de plântulas de pimenta ornamental e celosia em substrato à base de composto de lodo de curtume

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise da influência da qualidade em um ciclo de serviços na satisfação do cliente: estudo de caso em uma instituição de ensino.

With the increasing offer of education services in Brazil, it is necessary to evaluate the quality of service in education, especially in those institutions for vocational education which have a greater interaction with the labor market, in order to form qualified professionals and meet the growing demand that the country has today[A1] . In Brazil, the evaluation of the quality of library services has influenced the assessment of educational institutions and in this context, there needs to be a process to monitor the quality of services provided by libraries. However, the service is not done in a single moment and thus to a more detailed assessment it needs to be measured and evaluated each different time the customer uses it. Therefore, the aim of this work consists in measuring the quality in every moment of truth of a cycle of library services to assess which are the most relevant moments in the client's perspective at the library of the Federal Institute of Education, Science and Technology of Rio Grande do Norte (IFRN) Campus João Câmara in building the overall quality of service. In the literature review, internal secondary sources were used, from the database of the institution studied, and also external sources, through literature in books, articles, dissertations, theses and journals on compost quality, service quality, cycle services, measuring quality, satisfaction, teaching activities, and on library services specifically. We applied a questionnaire to students in the library based on models of quality measurement SERVPERF and SERVQUAL and its variations such as SERVQUAL pondered and SERVPERF pondered . Through analysis based on concepts of reliability and validity of measuring instruments, it was found that the SERVPERF model is the instrument that most closely matches the dimensions of quality assessed in the library with customer satisfaction measured by the questionnaire. From there, the search results as measured by statistical techniques of analysis, indicated that the initial and final moments of truth of the cycle of service quality had the greatest influence on overall customer satisfaction with the library service