Numerical modelling of lubricated foil rolling

A model of lubricated cold strip rolling (1, 2) is extended to the thin foil regime. The model considers the evolution of asperity geometry and lubricant pressure through the bite, treating the strip using a conventional slab model. The elastic deflections of the rolls are coupled into the problem using an elastic finite element model. Friction between the roll and the asperities on the strip is modelled using the Coulomb and Tresca friction factor approaches. The shear stress in the Coulomb friction model is limited to the shear yield stress of the strip. A novel modification to these standard friction laws is used to mimic slipping friction in the reduction regions and sticking friction in a central neutral zone. The model is able to reproduce the sticking and slipping zones predicted by Fleck et al. (3). The variation of rolling load, lubricant film thickness and asperity contact area with rolling speed is examined, for conditions typical of rolling aluminium foil from a thickness of 50 to 25 μm. T he contact area and hence friction rises as the speed drops, leading to a large increase in rolling load. This increase is considerably more marked using Coulomb friction as compared with the friction factor approach. Forward slip increases markedly as the speed falls and a significant sticking region develops.

Incidence of epizootic ulcerative syndrome (EUS) in freshwater fishes in the endemic area of Punjab, Pakistan

Incidence of Epizootic Ulcerative Syndrome (EUS) has been recorded for the first time in freshwater fishes in the endemic area of Punjab, Pakistan. Survey of private fish farms, hatchery and natural water bodies was conducted in a radius of 14 Km from around river Ravi near Lahore (Punjab Province) Pakistan. Out Of 1628 fishes belonging to 18 genera, 517 fishes of 10 genera were found affected with EUS. The incidence of EUS in culturable fishes was higher in Cirrhina mrigala (15.4%) moderate in Catla cat/a (13.3%) and lower in Labeo rohita (5.0%). Exotic fish, Chinese carp Ctenoparyngodon idella and Hypophthalmicthys molitrix were not affected with EUS. In non-culturable fishes the incidence of EUS was highest in Channa punctatus (72.8%) moderate in by C. straitus (65.45%) and comparatively lower Puntius ticto (43.7%). A slow growing temperature sensitive Saprolegnia spp. was isolated from all of EUS infected fish species. Aeromonas spp. and Pseudomonas spp. were isolated from the diseased fishes. Ectoparasites viz. Lernaea, Argulus and Triclwdina spp. were also isolated from the skin and gills of infected fish species. The disease was more severe in water having low alkalinity (70 mg/1), hardness (75 mg/1) and low temperature of 10-12 °C.

Abalone culture - a new business opportunity

There are about 100 species of abalone in the world, but only 20 are of high commercial importance. In the Philippines, the abalone species are Haliotis asinina, H. varia, H. ovina and H.glabra, but it is the former which has high commercial value. The semi-processed abalone are frozen, dried or canned for export to many countries. An outline is given of the major aquaculture activities and duration of breeding and culture. Abalone hatchery production operations and investment costs and returns are detailed. Particular reference is made to the modular system of abalone culture in floating cages.

苹果绵蚜与苹果绵蚜蚜小蜂种间关系的模拟研究——Ⅰ.两种群生物学的数量特征比较

本研究通过对苹果绵蚜(Eriosoma lanigerum Haus.)和苹果绵蚜蚜小蜂(Aphelinus mali Hald.)的生物学和生态学特性的比较分析,得到如下结论:(1)苹果绵蚜完成一世代的积温要求和发育起点温度均低于苹果绵蚜蚜小蜂,二者的有效积温分别为352.19日度和375.51日度,发育起点温度分别为7.62度和7.95度。因此,苹果绵蚜较其寄生蜂更适合于昆明地区的气候条件;(2)苹果绵蚜种群的增长能力大于苹果绵蚜蚜小蜂,二者的内禀增长率在20℃下分别为0.1390和0.1146,在25℃下分别为0.2647和0.1628。这可能是昆明地区苹果绵蚜蚜小蜂不能控制苹果绵蚜为害的主要原因。

银鲫ZP3的表达特征和卵壳ZP3蛋白的分离

克隆得到银鲫(Carassius auratus gibelio)ZP3基因全长cDNA,在体外表达出银鲫的ZP3融合蛋白,并制备出多抗血清;通过免疫印迹和RT-PCR分析,研究了银鲫ZP3在卵子发生过程中的表达特征和在早期发育胚胎中的状态变化。研究结果表明,银鲫ZP3的转录发生在卵黄发生以前,而ZP3蛋白的翻译起始于卵黄形成阶段,且随着卵母细胞进一步成熟,其含量不断增加。ZP3蛋白的存在状态在受精后和早期胚胎发育过程中发生了明显变化。在受精后5—30min期间,抽提液中原始的ZP3蛋白带迅速消失,取而代

Engineering of micro- and nanostructured surfaces with anisotropic geometries and properties

Widespread approaches to fabricate surfaces with robust micro- and nanostructured topographies have been stimulated by opportunities to enhance interface performance by combining physical and chemical effects. In particular, arrays of asymmetric surface features, such as arrays of grooves, inclined pillars, and helical protrusions, have been shown to impart unique anisotropy in properties including wetting, adhesion, thermal and/or electrical conductivity, optical activity, and capability to direct cell growth. These properties are of wide interest for applications including energy conversion, microelectronics, chemical and biological sensing, and bioengineering. However, fabrication of asymmetric surface features often pushes the limits of traditional etching and deposition techniques, making it challenging to produce the desired surfaces in a scalable and cost-effective manner. We review and classify approaches to fabricate arrays of asymmetric 2D and 3D surface features, in polymers, metals, and ceramics. Analytical and empirical relationships among geometries, materials, and surface properties are discussed, especially in the context of the applications mentioned above. Further, opportunities for new fabrication methods that combine lithography with principles of self-assembly are identified, aiming to establish design principles for fabrication of arbitrary 3D surface textures over large areas. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

PCB-integrated optical waveguide sensors: An ammonia gas sensor

This paper presents a novel platform for the formation of cost-effective PCB-integrated optical waveguide sensors. The sensor design relies on the use of multimode polymer waveguides that can be formed directly on standard PCBs and commercially-available chemical dyes, enabling the integration of all essential sensor components (electronic, photonic, chemical) on low-cost substrates. Moreover, it enables the detection of multiple analytes from a single device by employing waveguide arrays functionalised with different chemical dyes. The devices can be manufactured with conventional methods of the PCB industry, such as solder-reflow processes and pick-and-place assembly techniques. As a proof of principle, a PCB-integrated ammonia gas sensor is fabricated on a FR4 substrate. The sensor operation relies on the change of the optical transmission characteristics of chemically functionalised optical waveguides in the presence of ammonia molecules. The fabrication and assembly of the sensor unit, as well as fundamental simulation and characterisation studies, are presented. The device achieves a sensitivity of approximately 30 ppm and a linear response up to 600 ppm at room temperature. Finally, the potential to detect multiple analytes from a single device is demonstrated using principal-component analysis. © 1983-2012 IEEE.

Idea Competitions under scrutiny: Acquisition, intelligence or public relations mechanism?

Idea Competitions (ICs) are becoming a popular mechanism chosen by firms to perform Open Innovation. They are a way to engage with external sources of knowledge such as individual entrepreneurs and small firms who are asked to submit ideas and compete for a prize. However, little is known about the success of ICs as acquisition mechanisms. The researchers conducted interviews in five multinational companies to evaluate the effects of using ICs as an acquisition mechanism. Although still preliminary, the results of this study show that the success of ICs as an acquisition mechanism remains uncertain because their output (i.e. the number of ideas acquired) is often low compared to the input (i.e. the number of ideas submitted) and effort required to run them (e.g. to vet ideas). Across the cases observed, ICs appear to be more successful at identifying and acquiring early-stage ideas, particularly those outside the current business focus. The study shows that ICs deliver other functional benefits such as improved intelligence and public relations and that these need to be considered as part of the evaluation of the IC's success. The paper concludes by discussing the conditions in which ICs are implemented and the implications for Open Innovation theory. © 2013 Elsevier Inc.

Effects of dietary ascorbic acid supplementation on the growth performance, immune and stress response in juvenile Leiocassis longirostris Gunther exposed to ammonia

This experiment was designed to investigate the effect of dietary supplemental ascorbic acid (AA) on the feed intake, growth, serum lysozyme, hepatic superoxide dismutase (SOD) and handling stress response in Chinese longsnout catfish (Leiocassis longirostris Gunther) exposed to three levels of unionized ammonia nitrogen (UIA-N). Juvenile Chinese longsnout catfish were reared in 54 fibreglass tanks with a 3 x 3 factorial design treatment consisting of three supplemental AA levels in ascorbyl 2-monophosphate (38, 364 and 630 mg AA equivalent kg(-1) diet) and three UIA-N concentrations [0.004 (the control), 0.037 and 0.292 mg L-1]. The fish were sampled on the 11th, 32nd and 60th day. On the 62nd day, the remaining fish were subjected to an acute stress by being held in a dipnet out of water for 60 s, and sampled at 30 min post handling. The results showed that the specific growth rate (SGR) in 32 days significantly decreased with increased water UIA-N (P=0.0476) but was not affected by dietary supplemental AA (P > 0.05). After 60 days, SGR, feeding rate (FR) and feed conversion efficiency (FCE) significantly increased with increased dietary supplemental AA (P < 0.001) while remaining unaffected by water UIA-N (P > 0.05). There was no significant interaction between dietary AA and UIA-N for growth responses (P > 0.05). The serum lysozyme activity on the 11th day and the hepatic SOD activity on the 32nd day were significantly affected at high (0.292 mg L-1) water UIA-N. On the 62nd day, the increase in cortisol resulting from acute stress significantly decreased by higher UIA-N (P=0.038). It is suggested that Chinese longsnout catfish displayed an adaptive response after long-term UIA-N exposure, and AA had beneficial effects on the growth and feed intake of catfish and alleviated the negative effects of chronic ammonia stress. A chronically higher ammonia level shows a tendency to inhibit the cortisol response to another acute stressor.

Quantitative structure-property relationship study on reductive dehalogenation of selected halogenated aliphatic hydrocarbons in sediment slurries

In this study, by the use of partial least squares (PLS) method and 26 quantum chemical descriptors computed by PM3 Hamiltonian, a quantitative structure-property relationship (QSPR) model was developed for reductive dehalogenation rate constants of 13 halogenated aliphatic compounds in sediment slurry under anaerobic conditions. The model can be used to explain the dehalogenation mechanism. Halogenated aliphatic compounds with great energy of the lowest unoccupied molecular orbital (E-lumo), total energy (TE), electronic energy (EE), the smallest bond order of the carbon-halogen bonds (BO) and the most positive net atomic charges on an atom of the molecule (q(+)) values tend to be reductively dehalogenated slow, whereas halogenated aliphatic compounds with high values of molecular weight (Mw), average molecular polarizability (a) and core-core repulsion energy (CCR) values tend to be reductively dehalogenated fastest. (C) 2001 Published by Elsevier Science Ltd.