883 resultados para Classificação de fibras
Resumo:
This research was motivated by the requirement of asbestos s replacement in building systems and the need to generate jobs and income in the country side of the state of Bahia, Brazil. The project aimed at using fibers from licuri leaves (syagrus coronata), an abundant palm in the region, to produce composites appropriate for the sustainable production of cement fibre reinforced products in small plants. The composites were produced in laboratory using Portland cement CP-II-F32, sand, water, licuri palm fiber contents of 1.0, 1.5 and 2.0% by weight of binder (two different fiber length) and metakaolin. The latter was chosen as an additional binder for its efficiency to reduce the alkalinity of cementitious matrixes therefore preventing the degradation of vegetable fibers. The characterization of the composite components was carried out by sieving and laser particle size analyses, thermal analysis, fluorescence and X-ray diffraction. The composites performance was evaluated by 3- point-bending tests, compressive strength, ultrasound module of elasticity, free and restrained shrinkage, water capillarity absorption and apparent specific gravity. It has been found that the addition of fibers increased the time to onset of cracking over 200.00% and a 25% reduction in cracks opening in the restrained shrinkage test. The capillary absorption reduced about 25% when compared to fiber-free composites. It was also observed with regard to flexural strength, compressive strength and specific gravity, that the addiction of fibers did not affect the composite performance presenting similar results for compounds with and without fibers. In general it can be stated that the reinforced composite fibers of palm licuri presents physical and mechanical characteristics which enable them to be used in the intended proposals of this research
Resumo:
This master dissertation presents the study and implementation of inteligent algorithms to monitor the measurement of sensors involved in natural gas custody transfer processes. To create these algoritmhs Artificial Neural Networks are investigated because they have some particular properties, such as: learning, adaptation, prediction. A neural predictor is developed to reproduce the sensor output dynamic behavior, in such a way that its output is compared to the real sensor output. A recurrent neural network is used for this purpose, because of its ability to deal with dynamic information. The real sensor output and the estimated predictor output work as the basis for the creation of possible sensor fault detection and diagnosis strategies. Two competitive neural network architectures are investigated and their capabilities are used to classify different kinds of faults. The prediction algorithm and the fault detection classification strategies, as well as the obtained results, are presented
Resumo:
Stroke represents the first cause of disabilities among adults. Although different professions work together in treatment of stroke patients, all they use different terminologies for the description of the patients problems and it can constitute an impediment in the communication between the staff members. Thus, the multidisciplinary and interdisciplinary work would be facilitated if using a reference common tool, as the new International Classification of Functioning, Disability and Health (ICF). However, the ICF is very extensive and complex and due to its complexity, it has been evidenced the necessity to select its categories to become it more practical. The aim of the study was to investigate which categories of the ICF are more suitable to evaluate and to describe the stroke patient in the view of teachers and municipal public health professionals. It was a descriptive research, which involved 5 professors and 11 professionals of Physiotherapy that have worked at the health public area in Natal / RN. It was used the Delphi Technique in 3 rounds and the Likert Scale to select the categories among the ICF components. As result, from the 362 IFC categories, 94 were selected. The selected categories correspond to rehabilitative characteristics of Stroke patients in the universe of the Physiotherapy performance. The methodology applied was suitable to the studied object emphasizing the necessity of future studies for validation of the chosen categories
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
As efusões são problemas clínicos frequentes e que ocorrem em consequência de uma enfermidade que culmine com diminuição da pressão coloidosmótica intravascular, elevação da pressão hidrostática local, aumento da permeabilidade vascular e/ou comprometimento da drenagem realizada pelos vasos linfáticos. Dessa maneira, a avaliação laboratorial desse fluido torna-se relevante para que, em conjunto com os sinais clínicos apresentados pelo paciente, possa ser firmado um possível diagnóstico e instituída ação terapêutica adequada. Assim sendo, a classificação de uma efusão em transudato ou exsudato torna-se um dos pontos críticos para a elucidação do diagnóstico e condução do caso clínico. em Medicina Veterinária, o método tradicional de classificação de uma efusão é baseado na contagem celular e na concentração de proteínas do fluido. Contudo, diversos estudos evidenciam que tais parâmetros não são suficientes para a correta classificação de todas as efusões. Assim, o presente estudo foi conduzido com o objetivo de verificar a correlação de outros parâmetros bioquímicos com a diferenciação das efusões transudativas e exsudativas e, para tal, foram avaliadas as atividades de lacatato desidrogenase (LDH) das efusões, a relação de sua atividade fluido/soro, concentração de lactato das efusões, o gradiente de concentração de lactato do soro para o fluido e a concentração de proteínas das efusões. Os resultados obtidos permitiram observar que a atividade de LDH, a relação LDH efusão/soro, a concentração de lactato e o gradiente de concentração de lactato soro/efusão apresentam diferença estatisticamente significativa (P<0,05), bem como alta correlação com a classificação de uma efusão exsudativa.
Resumo:
The aim of this study was to typify the skeletal striated fibers of the gluteus medius muscle of young Brasileiro de Hipismo (BH) horses by means of histochemical analysis with m-ATPase and NADH-TR according to the sex and the biopsy depth. It was observed that the frequency (F;%) and the relative cross sectional area (RCSA;%) of the fibers type IIX were greater than the fibers type IIA, which F and RCSA were greater than the fibers type I. The comparison between sex and muscles depht, showed no significant difference in F and RCSA in the three types of fibers. The results of morphometry showed that the gluteus medius muscle has greater glycolitic metabolism and anaerobic capacity because of the presence of large proportion of type IIX fibers. This may be justified by the genetic influence of Thoroughbred in the formation of Brasileiro de Hipismo breed.
Resumo:
No município de Itatiba-SP, no período de março a julho de 2007, foi realizado um experimento com o objetivo de avaliar doses de nitrogênio e potássio e espaçamentos entre plantas na produtividade e classificação de brócolos para indústria. O experimento foi instalado sob delineamento de blocos ao acaso, com os tratamentos em esquema fatorial 5 x 4, e três repetições, sendo avaliadas as doses de nitrogênio-potássio: 105-105; 157,5-157,5; 210-210; 262,5-262,5 e 315-315 kg ha-1 de N e K2O e os espaçamentos entre plantas: 0,2; 0,3; 0,4 e 0,5 m. O espaçamento entre linhas foi de 0,8 m. Foram avaliados o teor foliar de nitrogênio (TN) e de potássio (TP), produtividade de inflorescência (PI), produtividade de floretes (PF), rendimento industrial (RI) e classificação dos floretes com base em seu comprimento: PF5 (<5 cm); PF57 (>5 e <7 cm); PF79 (>7 e <9 cm) e PF9 (>9 cm). Maiores espaçamentos entre plantas proporcionaram maior TN e menores PI e PF. As doses NK e os espaçamentos entre plantas não influenciaram significativamente o TP e o RI. As maiores produtividades de inflorescências (22,08 t ha-1) e de floretes (17,09 t ha-1) foram obtidas com 0,20 m entre plantas e 315 kg ha-1 de N e de K2O. Maior percentagem de floretes na classe PF5 foi obtida no menor espaçamento entre plantas. As doses NK e os espaçamentos entre plantas não influenciaram as percentagens de floretes nas classes PF79 e PF9.
Resumo:
The venous ulcer is an epidemiological problem of high prevalence, causing disability and dependence. Assess the tissue impairment level of patients with venous lesions, within a nursing referential, is relevant for the implementation of a directed assistance to specific clientele. Thus, this work aims to characterize the health status regarding the integrity the lower limbs skin of patients with venous ulcers, according to the of tissue integrity outcome indicators from the Nursing Outcomes Classification. A cross-sectional study conducted in a university hospital in Natal - Rio Grande do Norte. The sample consisted of 50 participants, selected through consecutive sampling. Data collection occurred through a interview and physical examination form and a operational definitions tool for indicators of the nursing Tissue Integrity outcome directed to patients with venous ulcer, applied from February to June 2012. Data analysis was done by descriptive statistics and nonparametric tests (Spearman, Kruskal-Wallis and Mann-Whitney tests). The project was approved by the Research Ethics Committee with protocol 608/11 and Presentation Certificate to Ethical Consideration No. 0038.0.294.000-11. The results were presented using three scientific articles derivatives of research. It was found that the indicators show moderate impairment, light and not impaired, as the median. The respondents had an average of 59.72 years, 66% female, 50% were retired, 60% with a partner, 44% had arterial hypertension, 26% allergies, 20% diabetes mellitus, 96% were sedentary, 14% drank alcohol and 6% were smokers. There was a statistically significant correlation of low intensity between age and hydration (p=0.032; rs=-0.304) and skin desquamation (p=0.026; rs=-0.316), family income and necrosis (p=0.012; rs=-0.353); Ankle Brachial Index and tissue perfusion (p=0,044; rs=-0,329); Diabetes Mellitus and texture (p=0.015) and tissue perfusion (p=0.026); allergy and texture (p=0.034), physical activity and hydration (p=0.034), smoking and thickness (p=0.018), and alcohol consumption and exudate (p=0.045). We conclude that the patients had light to moderate impairment, indicating a good state of health on the integrity of the skin of the lower limbs, according to the indicators of the outcome of tissue integrity Classification Nursing Outcomes valued in the present study. It is believed that the evaluation of impairment tissue using a self-nursing system and its relation with socioeconomic, clinical and risk factors are unique tools in the care planning and in the wound healing
Resumo:
One of needs of modern agriculture is the prediction of spatial variability of soil properties at more detailed scales for sustainable management and optimization of management practices. The mathematical model associated with knowledge of variability of soil attributes and mapping of relief forms has helped in agricultural planning. In this regard the aim of this study was to characterize the spatial variability of physical and chemical properties of Oxisols and Ultisols using numerical classification and the digital elevation model. Two distinct landforms: convex for the Oxisol (158 ha) and linear for the Ultisol (172 ha). 53 samples from the Oxisol and 57 samples from the Ultisol were taken. Multivariate analysis of clusters of attributes studied from their euclidean distances was performed. This analysis by dendograms along with digital elevation models for different soils characterized was more homogeneous in Ultisol groups, and less homogeneous for the Oxisol in convex landform. These quantitative methods showed that the landforms conditioned the spatial pattern of soil attributes.
Resumo:
The concrete for centuries constituted an essential structural element in the construction industry due to its relative ease of forming, before the weather durability, low cost, its lower maintenance compared to other materials such as steel. However, when the concrete is exposed to high temperatures tends to lose its mechanical characteristics, and may even result in loss of section, which undermines the stability and mechanical strength of structural elements. The pathologies resulting from exposure to elevated temperatures ranging from cracks, pops up chipping explosives (spalling). Recently, the technology of concrete is closely related to the study of its microstructure. The use of fibers added to concrete has been revealed as a solution to increase the mechanical strength of the concrete, it acts directly on the distribution of efforts to act in the play within the microstructure. In this work we used recycled PET fibers embedded in concrete with 15x2mm fck = 30MPa, water/cement ratio of 0.46, in works made for verification of mechanical strength of this mixture submitted to high temperature. The specimens of concrete with addition of PET fibers were tested after exposure to temperatures: ambient (30ºC), 100°C, 200°C, 300°C, 400°C, 600°C and 900°C. It was found that the concrete loses significant strength when exposed to temperatures above 300°C, however the use of fiber PET may delay the risk of collapse of structures for the formation of a network of channels that facilitate the escape of vapor 'water, reducing the pore pressure inside the structural element
Resumo:
The reinforced concrete structures are largely used in buildings worldwide. Upon the occurrence of fire in buildings, there is a consensus among researchers that the concrete has a high resistance to fire, due mainly to its low thermal conductivity. However, this does not mean that this material is not affected by exposure to high temperatures. Reduction of the compressive strength, modulus of elasticity, discoloration and cracking, are some of the effects caused by thermal exposure. In the case of concretes with higher resistance occurs even desplacamentos explosives, exposing the reinforcement to fire and contributing to reducing the support capacity of the structural element. Considering the above, this study aims to examine how the compressive strength and porosity of concrete are affected when subjected to high temperatures. Were evaluated concrete of different resistances, and even was the verified if addition fibers of polyethylene terephthalate (PET) in concrete can be used as an alternative to preventing spalling. The results indicated that explosive spalling affect not only high strength concrete whose values of this study ranged from 70 to 88 MPa, as well as conventional concrete of medium strength (52 MPa) and the temperature range to which the concrete begins to suffer significant changes in their resistance is between 400 º C and 600 º C, showing to 600 º C a porosity up to 188% greater than the room temperature
Resumo:
The objective of this work is to draw attention to the importance of use of techniques of loss prevention in small retail organization, analyzing and creating a classification model related to the use of these in companies. This work identifies the fragilities and virtues of companies and classifies them relating the use of techniques of loss prevention. The used methodology is based in a revision of the available literature on measurements and techniques of loss prevention, analyzing the processes that techniques needed to be adopted to reduce losses, approaching the "pillars" of loss prevention, the cycle life of products in retail and cycles of continues improvement in business. Based on the objectives of this work and on the light of researched techniques, was defined the case study, developed from a questionnaire application and the researcher's observation on a net of 16 small supermarkets. From those studies a model of classification of companies was created. The practical implications of this work are useful to point mistakes in retail administration that can become losses, reducing the profitability of companies or even making them impracticable. The academic contribution of this study is a proposal of an unpublished model of classification for small supermarkets based on the use of techniques of loss prevention. As a result of the research, 14 companies were classified as Companies with Minimum Use of Loss Prevention Techniques - CMULPT, and 02 companies were classified as Companies with Deficient Use of Loss Prevention Techniques - CDULPT. The result of the research concludes that on average the group was classified as being Companies with Minimum Use of Techniques of Prevention of Losses EUMTPP, and that the companies should adopt a program of loss prevention focusing in the identification and quantification of losses and in a implantation of a culture of loss prevention
Resumo:
Este trabalho tem como objetivo estudar os sistemas de Classificações existentes para a garantia da gestão da qualidade no setor hoteleiro, tendo como foco principal a Matriz de Classificação para os Meios de Hospedagem da EMBRATUR e a ISO 9000, observando os benefícios que esses sistemas e/ou processos de gestão poderão vir a proporcionar para o setor hoteleiro no que se refere à qualidade de seus serviços. Para a obtenção dessas informações foi realizada uma análise comparativa dos sistemas de gestão da qualidade através de pesquisas bibliográficas e de questionários enviados para empreendimentos hoteleiros certificados e classificados, onde os principais resultados fornecidos pela pesquisa foram trabalhados de forma a apresentar, de maneira clara, a superioridade de um sistema em relação ao outro
Resumo:
A utilização de dois critérios de seleção na pré-desmama, ganho médio diário do nascimento à desmama (GMD) e dias para ganhar 160 kg do nascimento à desmama (D160), foi estudada, analisando-se informações de 16.592 animais, provenientes do controle de desenvolvimento ponderal da Associação Brasileira dos Criadores de Zebu, nascidos no período de 1978 a 1994. Foram incluídos no modelo o efeito fixo de grupo de contemporâneos e os efeitos aleatórios genético aditivo de animal e materno, de ambiente permanente materno e o erro. A covariância entre os efeitos direto e materno foi considerada igual a zero. As estimativas dos componentes de variância e herdabilidade foram obtidas pelo método da máxima verossimilhança restrita e os valores genéticos preditos (VGs), por modelos animais uni-característica. As estimativas de herdabilidade foram: 0,12; 0,05; 0,10 e 0,05 para GMD (efeito direto), GMD (efeito materno), D160 (efeito direto) e D160 (efeito materno), respectivamente. Foram estimadas a correlação genética entre GMD e D160 (efeito direto e materno) e a correlação de classificação (Spearman) entre os valores genéticos para as categorias de touros, vacas e bezerros. As estimativas de correlação genética entre GMD e D160 foram 0,86 e 0,88, para o efeito direto e materno, respectivamente. As estimativas de correlação de ;rank;, também foram altas, entretanto, nenhuma foi igual a um, resultando em alterações na classificação dos animais. A relação entre as médias aritmética (A) e harmônica (H) e o desvio-padrão (S) do GMD ajustado para efeitos ambientais e maternos (GMDc) foi verificada utilizando-se um modelo restrito, sem intercepto, mediante as regressões linear e quadrática do S do GMDc sobre a diferença entre a média aritmética e média harmônica (A-H). Os resultados evidenciaram que, semelhantemente a H, o critério D160 apresentou a propriedade de discriminar touros com progênie mais uniforme.
Resumo:
The use of the maps obtained from remote sensing orbital images submitted to digital processing became fundamental to optimize conservation and monitoring actions of the coral reefs. However, the accuracy reached in the mapping of submerged areas is limited by variation of the water column that degrades the signal received by the orbital sensor and introduces errors in the final result of the classification. The limited capacity of the traditional methods based on conventional statistical techniques to solve the problems related to the inter-classes took the search of alternative strategies in the area of the Computational Intelligence. In this work an ensemble classifiers was built based on the combination of Support Vector Machines and Minimum Distance Classifier with the objective of classifying remotely sensed images of coral reefs ecosystem. The system is composed by three stages, through which the progressive refinement of the classification process happens. The patterns that received an ambiguous classification in a certain stage of the process were revalued in the subsequent stage. The prediction non ambiguous for all the data happened through the reduction or elimination of the false positive. The images were classified into five bottom-types: deep water; under-water corals; inter-tidal corals; algal and sandy bottom. The highest overall accuracy (89%) was obtained from SVM with polynomial kernel. The accuracy of the classified image was compared through the use of error matrix to the results obtained by the application of other classification methods based on a single classifier (neural network and the k-means algorithm). In the final, the comparison of results achieved demonstrated the potential of the ensemble classifiers as a tool of classification of images from submerged areas subject to the noise caused by atmospheric effects and the water column