Application of the nZEB methodology in the retrofitting of a typical Portuguese dwelling from the 60's.

Buildings and the whole built environment are in a key role when societies are mitigating climate change and adapting to its consequences. More than 50% of the existing residential buildings in EU-25 were built before 1970. Thus, these buildings are of significant importance in reducing energy consumption and CO2 emissions. The existence of more nearly zero energy buildings (nZEB) is a possible solution for this problem. This study aims to analyze the application of the nZEB methodology in the retrofitting of a typical Portuguese dwelling build in 1950. It was shown that the primary energy used can be reduced to a very low value (11,95 kWhep/m2.y) in comparison with the reference consumption (69,15 kWhep/m2.y), with the application of the best construction techniques together with the use of energy from on-site renewable sources.

Lecciones aprendidas en la implementación del Manejo Integrado Costero: las experiencias demostrativas del ecosistema Sabana-Camagüey, Cuba

En el archipiélago Sabana-Camagüey, Cuba, y sus áreas marino-costeras, se ha logrado un avance importante en la implementación del Manejo Integrado Costero(MIC) a través del establecimiento de Programas Demostrativos de implementación al nivel de municipios. Para ello fue decisiva la ejecución del proyecto PNUD/GEF Ecosistema Sabana-Camagüey durante casi 20 años. Se describen logros destacados, estrategias y acciones aplicadas, lecciones aprendidas y la importancia de estas para la protección y uso sostenible de la biodiversidad y el enfrentamiento de los peligros de la variabilidad del clima y el cambio climático. Fueron claves: (1) una intensa y sistemática educación, concienciación y capacitación de los actores claves, en temas pertinentes al MIC y a la biodiversidad, desde el comienzo del proyecto, a nivel nacional, provincial y municipios involucrados; (2) la inserción de la ejecución del proyecto dentro del tejido institucional del país; y (3) una fuerte participación de los actores claves (gobiernos, sectores productivos, instituciones científicas y docentes, comunidades y organizaciones no gubernamentales). El proceso de gobernanza de MIC se basó en la concepción y metodología de ECOCOSTAS/Coastal Resource Center-University of Rhode Island,incluyendo la aplicación del conocido ciclo de generación de MIC, los cuatro órdenes de resultados, y el apoyo en los resultados de la ciencia y en el mejor conocimiento general disponibles. Se brindan los resultados recientes de la aplicación, por el proyecto PNUD/ GEF Ecosistema Sabana-Camagüey, de un formulario de autoevaluación anual de desempeño operativo de MIC. La misma se realizó de manera participativa en siete Programas demostrativos de Manejo Integrado Costero para el Ecosistema Sabana-Camagüey, cuyas áreas de intervención fueron declaradas y certificadas por el Ministerio de Ciencia, Tecnología y Medio Ambiente, como “Zonas bajo régimen de Manejo Integrado Costero”. Cada programa de MIC estuvo conducido por el gobierno local y tuvo su estructura particular de composición e de integración. ABSTRACT: In the Sabana-Camagüey archipelago, Cuba, and its coastal marine areas, advances in the implementation of Integrated Coastal Management have been achieved through the establishment of Demonstrative Programs among other actions. For that, the execution of the “Sabana Camagüey Ecosystem” UNDP/ GEF Project during 20 years was decisive. Outstanding outcomes, applied strategies and actions, lessons learned, and their importance for protecting and sustainably use of biodiversity and for facing threats of both climate change and variability are described herein. Key actions were: (1) an intense and systematic stakeholder education, awareness and capacity building to key stakeholders about issues related to ICM and biodiversity since the beginning of the Project, at the involved national, province and municipality levels; as well as (3) a strong participation of key stakeholders (government, productive sectors, scientific and teaching institutions, communities, and non-governmental organizations). The governance process was based on the ECOCOSTAS/Coastal Resource Center-University of Rhode Island conception and methodology, including the application of the known MIC generation cycle, the four result orders, and the support from science and the best available knowledge. Recent results are provided about the application, by the UNDP/GEF Sabana-Camagüey Ecosystem Project, of an annual ICM operative performance self-assessment form. This was carried out in a participative way in seven ICM demonstrative Programs for the Sabana-Camagüey Ecosystem, which intervention areas were declared and certified as “Zones under Integrated Coastal Management Regime”. Each ICM program was led by the local government and had it particular composition and integration structure.

Epidemiology and genetic architecture of blood pressure: a family based study of Generation Scotland

Hypertension is a major risk factor for cardiovascular disease and mortality, and a growing global public health concern, with up to one-third of the world’s population affected. Despite the vast amount of evidence for the benefits of blood pressure (BP) lowering accumulated to date, elevated BP is still the leading risk factor for disease and disability worldwide. It is well established that hypertension and BP are common complex traits, where multiple genetic and environmental factors contribute to BP variation. Furthermore, family and twin studies confirmed the genetic component of BP, with a heritability estimate in the range of 30-50%. Contemporary genomic tools enabling the genotyping of millions of genetic variants across the human genome in an efficient, reliable, and cost-effective manner, has transformed hypertension genetics research. This is accompanied by the presence of international consortia that have offered unprecedentedly large sample sizes for genome-wide association studies (GWASs). While GWAS for hypertension and BP have identified more than 60 loci, variants in these loci are associated with modest effects on BP and in aggregate can explain less than 3% of the variance in BP. The aims of this thesis are to study the genetic and environmental factors that influence BP and hypertension traits in the Scottish population, by performing several genetic epidemiological analyses. In the first part of this thesis, it aims to study the burden of hypertension in the Scottish population, along with assessing the familial aggregation and heritialbity of BP and hypertension traits. In the second part, it aims to validate the association of common SNPs reported in the large GWAS and to estimate the variance explained by these variants. In this thesis, comprehensive genetic epidemiology analyses were performed on Generation Scotland: Scottish Family Health Study (GS:SFHS), one of the largest population-based family design studies. The availability of clinical, biological samples, self-reported information, and medical records for study participants has allowed several assessments to be performed to evaluate factors that influence BP variation in the Scottish population. Of the 20,753 subjects genotyped in the study, a total of 18,470 individuals (grouped into 7,025 extended families) passed the stringent quality control (QC) criteria and were available for all subsequent analysis. Based on the BP-lowering treatment exposure sources, subjects were further classified into two groups. First, subjects with both a self-reported medications (SRMs) history and electronic-prescription records (EPRs; n =12,347); second, all the subjects with at least one medication history source (n =18,470). In the first group, the analysis showed a good concordance between SRMs and EPRs (kappa =71%), indicating that SRMs can be used as a surrogate to assess the exposure to BP-lowering medication in GS:SFHS participants. Although both sources suffer from some limitations, SRMs can be considered the best available source to estimate the drug exposure history in those without EPRs. The prevalence of hypertension was 40.8% with higher prevalence in men (46.3%) compared to women (35.8%). The prevalence of awareness, treatment and controlled hypertension as defined by the study definition were 25.3%, 31.2%, and 54.3%, respectively. These findings are lower than similar reported studies in other populations, with the exception of controlled hypertension prevalence, which can be considered better than other populations. Odds of hypertension were higher in men, obese or overweight individuals, people with a parental history of hypertension, and those living in the most deprived area of Scotland. On the other hand, deprivation was associated with higher odds of treatment, awareness and controlled hypertension, suggesting that people living in the most deprived area may have been receiving better quality of care, or have higher comorbidity levels requiring greater engagement with doctors. These findings highlight the need for further work to improve hypertension management in Scotland. The family design of GS:SFHS has allowed family-based analysis to be performed to assess the familial aggregation and heritability of BP and hypertension traits. The familial correlation of BP traits ranged from 0.07 to 0.20, and from 0.18 to 0.34 for parent-offspring pairs and sibling pairs, respectively. A higher correlation of BP traits was observed among first-degree relatives than other types of relative pairs. A variance-component model that was adjusted for sex, body mass index (BMI), age, and age-squared was used to estimate heritability of BP traits, which ranged from 24% to 32% with pulse pressure (PP) having the lowest estimates. The genetic correlation between BP traits showed a high correlation between systolic (SBP), diastolic (DBP) and mean arterial pressure (MAP) (G: 81% to 94%), but lower correlations with PP (G: 22% to 78%). The sibling recurrence risk ratio (λS) for hypertension and treatment were calculated as 1.60 and 2.04 respectively. These findings confirm the genetic components of BP traits in GS:SFHS, and justify further work to investigate genetic determinants of BP. Genetic variants reported in the recent large GWAS of BP traits were selected for genotyping in GS:SFHS using a custom designed TaqMan® OpenArray®. The genotyping plate included 44 single nucleotide polymorphisms (SNPs) that have been previously reported to be associated with BP or hypertension at genome-wide significance level. A linear mixed model that is adjusted for age, age-squared, sex, and BMI was used to test for the association between the genetic variants and BP traits. Of the 43 variants that passed the QC, 11 variants showed statistically significant association with at least one BP trait. The phenotypic variance explained by these variant for the four BP traits were 1.4%, 1.5%, 1.6%, and 0.8% for SBP, DBP, MAP, and PP, respectively. The association of genetic risk score (GRS) that were constructed from selected variants has showed a positive association with BP level and hypertension prevalence, with an average effect of one mmHg increase with each 0.80 unit increases in the GRS across the different BP traits. The impact of BP-lowering medication on the genetic association study for BP traits has been established, with typical practice of adding a fixed value (i.e. 15/10 mmHg) to the measured BP values to adjust for BP treatment. Using the subset of participants with the two treatment exposure sources (i.e. SRMs and EPRs), the influence of using either source to justify the addition of fixed values in SNP association signal was analysed. BP phenotypes derived from EPRs were considered the true phenotypes, and those derived from SRMs were considered less accurate, with some phenotypic noise. Comparing SNPs association signals between the four BP traits in the two model derived from the different adjustments showed that MAP was the least impacted by the phenotypic noise. This was suggested by identifying the same overlapped significant SNPs for the two models in the case of MAP, while other BP traits had some discrepancy between the two sources

Using Needs Assessment to Understand Continuing Disability in Patients with Enduring Mental Illness. Implications for Considerations of Service Development

Particular strengths of the MRC Needs for Care Assessment Schedule have been used to investigate the treatment status of patients with persistent psychiatric disability in ways that other needs assessment tools are unable to. One hundred and seventy-nine such patients from three settings; a private sector psychiatric hospital, two public sector day hospitals situated in the same town, and a high security hospital, were found to have a high level of need. Although there were differences between settings, overall these needs were well met in all three. The high level of persistent disability found amongst these patients could not be attributed to failure on the part of those treating them to use the best available methods, or to failures to comply or engage with treatment on the patient's part. In some two thirds of instances persistent disability was best explained by the fact that even the most suitable available treatments have to be considered only partially effective.

Processo biotecnológico voltado a produção de estoques poliploides do camarão-branco litopenaeus vannamei (decapoda, penaeidae)

without practical results so far. Protocols used in biotechnological cultured aquatic organisms aimed at increasing growth rates and disease resistance, have been studied and perfected. Among the available techniques, the application of chromosomal manipulation, although still nascent, is presented as a tool aimed at mitigating ecological and economical issues in shrimp farming. The polyploidization artificial method already employed in fish and shellfish, has been widely researched for use in farmed shrimp. Some limitations of this method of expansion in shrimp refer to a better knowledge of cytogenetic aspects, the level of sexual dimorphism and performance in growing conditions. To contribute on some of these issues, the present study aimed to characterize cytogenetic species Litopenaeus vannamei (Decapoda) and Artemia franciscana (Anostraca), analyze the effectiveness of methods for detection of ploidy, through the use of flow cytometry in processes of induction polyploidy cold thermal shock at different stages of development of newly fertilized eggs. Additionally, aimed also the qualitative and quantitative comparison of larval development between diploid and polyploid organisms, besides the identification of sexual dimorphism in L. vannamei, through geometric morphometrics. The results provide information relevant to the improvement and widespread use of biotechnological methods applied toward national productivity in shrimp farming

Redes de metrologia: um estudo de caso da rede de defesa e segurança do SIBRATEC

Tese (Doutorado em Tecnologia Nuclear)

The Effectiveness of Community-Based Nutrition Education on the Nutrition Status of Under-five Children in Developing Countries. A Systematic Review

Aim This systematic review aimed at examining the best available evidence on the effectiveness of community-based nutrition education in improving the nutrition status of under five children in developing countries. Methods A systematic search of the literature was conducted utilising the following data bases: Cumulative Index to Nursing and Allied Health Literature (CINAHL), EMBASE, Medline, and Web of Knowledge. 9 studies were identified for the critical appraisal process. The Joanna Briggs Institute (JBI) critical appraisal check-list for experimental studies was utilised and two reviewers conducted the appraisal process independently. 7 studies were included for this review and data was extracted using the JBI data extraction form for experimental studies. The extracted data was heterogeneous as such narrative synthesis was conducted. Results The nutritional status of children in all studies improved and this was evidenced by increases in weight, height, mid upper arm circumference and reduced morbidity. Key messages about education were age at introduction of complementary foods, nutrition value on different types of feeds found locally and frequency of feeding the children. However, there were varied Results regarding the effects of the intervention on the nutrition status of children. This was attributed by differences in implementers’ characteristics, different intervention strategy and intensity, difference in age of the children at enrolment, pre-existing children’s growth and nutritional status and follow-up periods. In addition to home visiting, conducting group meetings of care givers and community leaders, providing education twice a week and use of cooking demonstrations have shown that they produce highly significant findings. Conclusion The evidence from the identified studies suggests that community- based nutrition education improves the nutrition status of under-five children in developing countries.

FOCUS : frailty management optimisation through EIPAHA commitments and utilisation of stakeholders’ input – an innovative European project in elderly care

The goal of FOCUS, which stands for Frailty Management Optimization through EIPAHA Commitments and Utilization of Stakeholders’ Input, is to reduce the burden of frailty in Europe. The partners are working on advancing knowledge of frailty detection, assessment, and management, including biological, clinical, cognitive and psychosocial markers, in order to change the paradigm of frailty care from acute intervention to prevention. FOCUS partners are working on ways to integrate the best available evidence from frailty-related screening tools, epidemiological and interventional studies into the care of frail people and their quality of life. Frail citizens in Italy, Poland and the UK and their caregivers are being called to express their views and their experiences with treatments and interventions aimed at improving quality of life. The FOCUS Consortium is developing pathways to leverage the knowledge available and to put it in the service of frail citizens. In order to reach out to the broadest audience possible, the FOCUS Platform for Knowledge Exchange and the platform for Scaling Up are being developed with the collaboration of stakeholders. The FOCUS project is a development of the work being done by the European Innovation Partnership on Active and Healthy Ageing (EIPAHA), which aims to increase the average healthy lifespan in Europe by 2020 while fostering sustainability of health/social care systems and innovation in Europe. The knowledge and tools developed by the FOCUS project, with input from stakeholders, will be deployed to all EIPAHA participants dealing with frail older citizens to support activities and optimize performance.

Atlantic salmon in regulated rivers : Migration, dam passage, and fish behavior

Hydropower dams block migration routes and disrupt longitudinal connectivity in rivers, thereby posing a threat to migratory fish species. Various fish passage solutions have been implemented to improve connectivity with varying success. A well-functioning passage solution must ensure safe and timely passage routes that are used by a substantial portion of the migrating fish. In this thesis, I report the results from telemetry studies where the behavior and survival of migrating Atlantic salmon spawners, post-spawners and smolts have been evaluated in relation to hydropower dam passage. I evaluate downstream passage performance at dams with no passage solutions in the River Klarälven, and with simple passage solutions in in the Winooski River. In the River Ätran, I study both upstream- and downstream passage performance at a dam with sophisticated passage solutions based on the best available technology. In addition, I have studied the survival and behavior of post-spawners and hatchery-released smolts. A substantial portion of the spawners survived spawning and initiated downstream migration. Most males migrated downstream in autumn following spawning, whereas females tended to stay in the river until spring. For hatchery-reared smolts, early release was associated with faster initiation of migration and higher survival compared to late release. Multiple dam passage resulted in high mortality for both smolts and kelts. For smolts, dam passage, even with simple passage solutions, was associated with substantial delay and mortality. High spill levels were linked to high survival and short delay for downstream migrating salmon. The best available passage solution, which consisted of a nature-like fishway and a low sloping intake rack to guide fish to a bypass, resulted in rapid passage of a large portion of the adult migrants.

Determining conservation priority areas for Palearctic passerine migrant birds in sub-Saharan Africa

Migratory bird species breeding in the Palearctic and overwintering in sub-Saharan Africa face multiple conservation challenges. As a result, many of these species have declined in recent decades, some dramatically. We therefore used the best available database for the distribution of 68 passerine migrants in sub-Saharan Africa to determine priority regions for their conservation. After modeling each species’ distribution using BIOMOD software, we entered the resulting species distributions at a 1° × 1° grid resolution into MARXAN software. We then used several different selection procedures that varied the boundary length modifier, species penalty factor, and the inclusion of grid cells with high human footprint and with protected areas. While results differed between selection procedures, four main regions were regularly selected: (1) one centered on southern Mali; (2) one including Eritrea, central Sudan, and northern Ethiopia; (3) one encompassing southwestern Kenya and much of Tanzania and Uganda; and (4) one including much of Zimbabwe and southwestern Zambia. We recommend that these four regions become priority regions for research and conservation efforts for the bird species considered in this study.

Energy consumption and energy efficiency in olive oil mills: case studies in Portugal and Spain in the frame of TESLA project

TESLA project (Transfering Energy Save Laid on Agroindustry) financed by the European Commission, had the main goals of evaluating the energy consumption and to identify the best available practices to improve energy efficiency in key agro-food sectors, such as the olive oil mills. A general analysis of energy consumptions allowed identifying the partition between electrical and thermal energy (approximately 50%) and the production processes responsible for the higher energy consumptions, as being the in the mill and paste preparation and the phases separation. Some measures for reducing energy waste and for improving energy efficiency were identified and the impact was evaluated by using the TESLA tool developed by Circe and available at the TESLA website.

A finite-strain solid–shell using local Löwdin frames and least-squares strains

A finite-strain solid–shell element is proposed. It is based on least-squares in-plane assumed strains, assumed natural transverse shear and normal strains. The singular value decomposition (SVD) is used to define local (integration-point) orthogonal frames-of-reference solely from the Jacobian matrix. The complete finite-strain formulation is derived and tested. Assumed strains obtained from least-squares fitting are an alternative to the enhanced-assumed-strain (EAS) formulations and, in contrast with these, the result is an element satisfying the Patch test. There are no additional degrees-of-freedom, as it is the case with the enhanced-assumed-strain case, even by means of static condensation. Least-squares fitting produces invariant finite strain elements which are shear-locking free and amenable to be incorporated in large-scale codes. With that goal, we use automatically generated code produced by AceGen and Mathematica. All benchmarks show excellent results, similar to the best available shell and hybrid solid elements with significantly lower computational cost.

A finite-strain solid–shell using local Löwdin frames and least-squares strains

A finite-strain solid–shell element is proposed. It is based on least-squares in-plane assumed strains, assumed natural transverse shear and normal strains. The singular value decomposition (SVD) is used to define local (integration-point) orthogonal frames-of- reference solely from the Jacobian matrix. The complete finite-strain formulation is derived and tested. Assumed strains obtained from least-squares fitting are an alternative to the enhanced-assumed-strain (EAS) formulations and, in contrast with these, the result is an element satisfying the Patch test. There are no additional degrees-of-freedom, as it is the case with the enhanced- assumed-strain case, even by means of static condensation. Least-squares fitting produces invariant finite strain elements which are shear-locking free and amenable to be incorporated in large-scale codes. With that goal, we use automatically generated code produced by AceGen and Mathematica. All benchmarks show excellent results, similar to the best available shell and hybrid solid elements with significantly lower computational cost.

Sustainable improvement of water networks : to achieve best decisions for rehabilitation plans using advanced GIS and statistical techniques

Many of developing countries are facing crisis in water management due to increasing of population, water scarcity, water contaminations and effects of world economic crisis. Water distribution systems in developing countries are facing many challenges of efficient repair and rehabilitation since the information of water network is very limited, which makes the rehabilitation assessment plans very difficult. Sufficient information with high technology in developed countries makes the assessment for rehabilitation easy. Developing countries have many difficulties to assess the water network causing system failure, deterioration of mains and bad water quality in the network due to pipe corrosion and deterioration. The limited information brought into focus the urgent need to develop economical assessment for rehabilitation of water distribution systems adapted to water utilities. Gaza Strip is subject to a first case study, suffering from severe shortage in the water supply and environmental problems and contamination of underground water resources. This research focuses on improvement of water supply network to reduce the water losses in water network based on limited database using techniques of ArcGIS and commercial water network software (WaterCAD). A new approach for rehabilitation water pipes has been presented in Gaza city case study. Integrated rehabilitation assessment model has been developed for rehabilitation water pipes including three components; hydraulic assessment model, Physical assessment model and Structural assessment model. WaterCAD model has been developed with integrated in ArcGIS to produce the hydraulic assessment model for water network. The model have been designed based on pipe condition assessment with 100 score points as a maximum points for pipe condition. As results from this model, we can indicate that 40% of water pipeline have score points less than 50 points and about 10% of total pipes length have less than 30 score points. By using this model, the rehabilitation plans for each region in Gaza city can be achieved based on available budget and condition of pipes. The second case study is Kuala Lumpur Case from semi-developed countries, which has been used to develop an approach to improve the water network under crucial conditions using, advanced statistical and GIS techniques. Kuala Lumpur (KL) has water losses about 40% and high failure rate, which make severe problem. This case can represent cases in South Asia countries. Kuala Lumpur faced big challenges to reduce the water losses in water network during last 5 years. One of these challenges is high deterioration of asbestos cement (AC) pipes. They need to replace more than 6500 km of AC pipes, which need a huge budget to be achieved. Asbestos cement is subject to deterioration due to various chemical processes that either leach out the cement material or penetrate the concrete to form products that weaken the cement matrix. This case presents an approach for geo-statistical model for modelling pipe failures in a water distribution network. Database of Syabas Company (Kuala Lumpur water company) has been used in developing the model. The statistical models have been calibrated, verified and used to predict failures for both networks and individual pipes. The mathematical formulation developed for failure frequency in Kuala Lumpur was based on different pipeline characteristics, reflecting several factors such as pipe diameter, length, pressure and failure history. Generalized linear model have been applied to predict pipe failures based on District Meter Zone (DMZ) and individual pipe levels. Based on Kuala Lumpur case study, several outputs and implications have been achieved. Correlations between spatial and temporal intervals of pipe failures also have been done using ArcGIS software. Water Pipe Assessment Model (WPAM) has been developed using the analysis of historical pipe failure in Kuala Lumpur which prioritizing the pipe rehabilitation candidates based on ranking system. Frankfurt Water Network in Germany is the third main case study. This case makes an overview for Survival analysis and neural network methods used in water network. Rehabilitation strategies of water pipes have been developed for Frankfurt water network in cooperation with Mainova (Frankfurt Water Company). This thesis also presents a methodology of technical condition assessment of plastic pipes based on simple analysis. This thesis aims to make contribution to improve the prediction of pipe failures in water networks using Geographic Information System (GIS) and Decision Support System (DSS). The output from the technical condition assessment model can be used to estimate future budget needs for rehabilitation and to define pipes with high priority for replacement based on poor condition. rn

Adhesive thickness effects of a ductile adhesive by optical measurement techniques

Adhesive bonding is an excellent alternative to traditional joining techniques such as welding, mechanical fastening or riveting. However, there are many factors that have to be accounted for during joint design to accurately predict the joint strength. One of these is the adhesive layer thickness (tA). Most of the results are for epoxy structural adhesives, tailored to perform best with small values of tA, and these show that the lap joint strength decreases with increase of tA (the optimum joint strength is usually obtained with tA values between 0.1 and 0.2 mm). Recently, polyurethane adhesives were made available in the market, designed to perform with larger tA values, and whose fracture behaviour is still not studied. In this work, the effect of tA on the tensile fracture toughness (View the MathML source) of a bonded joint is studied, considering a novel high strength and ductile polyurethane adhesive for the automotive industry. This work consists on the fracture characterization of the bond by a conventional and the J-integral techniques, which accurately account for root rotation effects. An optical measurement method is used for the evaluation of crack tip opening (δn) and adherends rotation at the crack tip (θo) during the test, supported by a Matlab® sub-routine for the automated extraction of these parameters. As output of this work, fracture data is provided in traction for the selected adhesive, enabling the subsequent strength prediction of bonded joints.