Functional and environmental design of detached, low crest level breakwaters

In this article we research the design of detached breakwaters, a type of coastal defence work designed to combat erosion on beaches in a stable, sustainable fashion. Our aim is to formulate a functional and environmental (nonstructural) method of design that defines the fundamental characteristics of a detached breakwater as a function of the desired effect on the coast whilst meeting social demands and preserving or improving the quality of the littoral environment. We aim to make this method generally applicable by considering relations between variables of different natures (climatic, geomorphologic, and geometric) influencing the changes experienced on the coast after the detached breakwater has been built. We carried out the study of the relations between the different variables on the data from 19 actual, existing detached breakwaters on the Spanish Mediterranean coastline, and we followed a methodology based on the implementation of nondimensional monomials and on a search for relations of dependency between them. Finally, we discussed the results obtained and came up with a proposal for a design method that uses some of the graphic relations found between the variables studied and that achieves the main objective. For example, a case of a detached breakwater’s geometric presizing is solved as a practical demonstration of how the method is applied. La investigación que se presenta en este artículo aborda el diseño de los diques exentos, por constituir estos un tipo de obras de defensa costera con el que poder luchar de una forma estable y sostenible contra muchos de los problemas de erosión que existen en las playas. El objetivo principal de este trabajo es la formulación de un método de diseño funcional y ambiental (no estructural) que permita definir las características fundamentales de un dique exento en función del efecto que se quiera inducir en la costa, satisfaciendo las demandas sociales y preservando o mejorando la calidad del medio ambiente litoral. Además, se busca la aplicabilidad general del método mediante la consideración de relaciones entre variables de distinta naturaleza (climáticas, geomorfológicas y geométricas) que tienen influencia en los cambios que se experimentan en la costa tras la construcción del dique exento. El estudio de las relaciones entre las distintas variables se realiza sobre los datos de una base de diecinueve diques exentos reales, existentes en el litoral mediterráneo español, y sigue una metodología basada en el planteamiento de monomios adimensionales y en la búsqueda de relaciones de dependencia entre ellos. Finalmente, la discusión de los resultados obtenidos conduce a la propuesta de un método de diseño que utiliza algunas de las relaciones graficas encontradas entre las variables estudiadas y con el que se consigue el objetivo principal anteriormente expuesto. Para demostrar la aplicación práctica del método se resuelve un caso de predimensionamiento geométrico de un dique exento a modo de ejemplo.

Optimizing the creation of base populations for aquaculture breeding programs using phenotypic and genomic data and its consequences on genetic progress

The success of an aquaculture breeding program critically depends on the way in which the base population of breeders is constructed since all the genetic variability for the traits included originally in the breeding goal as well as those to be included in the future is contained in the initial founders. Traditionally, base populations were created from a number of wild strains by sampling equal numbers from each strain. However, for some aquaculture species improved strains are already available and, therefore, mean phenotypic values for economically important traits can be used as a criterion to optimize the sampling when creating base populations. Also, the increasing availability of genome-wide genotype information in aquaculture species could help to refine the estimation of relationships within and between candidate strains and, thus, to optimize the percentage of individuals to be sampled from each strain. This study explores the advantages of using phenotypic and genome-wide information when constructing base populations for aquaculture breeding programs in terms of initial and subsequent trait performance and genetic diversity level. Results show that a compromise solution between diversity and performance can be found when creating base populations. Up to 6% higher levels of phenotypic performance can be achieved at the same level of global diversity in the base population by optimizing the selection of breeders instead of sampling equal numbers from each strain. The higher performance observed in the base population persisted during 10 generations of phenotypic selection applied in the subsequent breeding program.

A multi-level analysis of innovation diffusion: The case of solar photovoltaic systems in Germany and the disillusion of grid parity

¿Suministrarán las fuentes de energía renovables toda la energía que el mundo necesita algún día? Algunos argumentan que sí, mientras que otros dicen que no. Sin embargo, en algunas regiones del mundo, la producción de electricidad a través de fuentes de energía renovables ya está en una etapa prometedora de desarrollo en la que su costo de generación de electricidad compite con fuentes de electricidad convencionales, como por ejemplo la paridad de red. Este logro ha sido respaldado por el aumento de la eficiencia de la tecnología, la reducción de los costos de producción y, sobre todo, los años de intervenciones políticas de apoyo financiero. La difusión de los sistemas solares fotovoltaicos (PV) en Alemania es un ejemplo relevante. Alemania no sólo es el país líder en términos de capacidad instalada de sistemas fotovoltaicos (PV) en todo el mundo, sino también uno de los países pioneros donde la paridad de red se ha logrado recientemente. No obstante, podría haber una nube en el horizonte. La tasa de difusión ha comenzado a declinar en muchas regiones. Además, las empresas solares locales – que se sabe son importantes impulsores de la difusión – han comenzado a enfrentar dificultades para manejar sus negocios. Estos acontecimientos plantean algunas preguntas importantes: ¿Es ésta una disminución temporal en la difusión? ¿Los adoptantes continuarán instalando sistemas fotovoltaicos? ¿Qué pasa con los modelos de negocio de las empresas solares locales? Con base en el caso de los sistemas fotovoltaicos en Alemania a través de un análisis multinivel y dos revisiones literarias complementarias, esta tesis doctoral extiende el debate proporcionando riqueza múltiple de datos empíricos en un conocimiento de contexto limitado. El primer análisis se basa en la perspectiva del adoptante, que explora el nivel "micro" y el proceso social que subyace a la adopción de los sistemas fotovoltaicos. El segundo análisis es una perspectiva a nivel de empresa, que explora los modelos de negocio de las empresas y sus roles impulsores en la difusión de los sistemas fotovoltaicos. El tercero análisis es una perspectiva regional, la cual explora el nivel "meso", el proceso social que subyace a la adopción de sistemas fotovoltaicos y sus técnicas de modelado. Los resultados incluyen implicaciones tanto para académicos como políticos, no sólo sobre las innovaciones en energía renovable relativas a la paridad de red, sino también, de manera inductiva, sobre las innovaciones ambientales impulsadas por las políticas que logren la competitividad de costes. ABSTRACT Will renewable energy sources supply all of the world energy needs one day? Some argue yes, while others say no. However, in some regions of the world, the electricity production through renewable energy sources is already at a promising stage of development at which their electricity generation costs compete with conventional electricity sources’, i.e., grid parity. This achievement has been underpinned by the increase of technology efficiency, reduction of production costs and, above all, years of policy interventions of providing financial support. The diffusion of solar photovoltaic (PV) systems in Germany is an important frontrunner case in point. Germany is not only the top country in terms of installed PV systems’ capacity worldwide but also one of the pioneer countries where the grid parity has recently been achieved. However, there might be a cloud on the horizon. The diffusion rate has started to decline in many regions. In addition, local solar firms – which are known to be important drivers of diffusion – have started to face difficulties to run their businesses. These developments raise some important questions: Is this a temporary decline on diffusion? Will adopters continue to install PV systems? What about the business models of the local solar firms? Based on the case of PV systems in Germany through a multi-level analysis and two complementary literature reviews, this PhD Dissertation extends the debate by providing multiple wealth of empirical details in a context-limited knowledge. The first analysis is based on the adopter perspective, which explores the “micro” level and the social process underlying the adoption of PV systems. The second one is a firm-level perspective, which explores the business models of firms and their driving roles in diffusion of PV systems. The third one is a regional perspective, which explores the “meso” level, i.e., the social process underlying the adoption of PV systems and its modeling techniques. The results include implications for both scholars and policymakers, not only about renewable energy innovations at grid parity, but also in an inductive manner, about policy-driven environmental innovations that achieve the cost competiveness.

Laboratorios virtuales y docencia de la automática en la formación tecnológica de base

Recientemente, ha surgido un interés por aprender a programar, debido a las oportunidades profesionales que da este tipo de estudios universitarios. Es fácil de entender porque el número de trabajos para programadores e ingenieros informáticos está creciendo rápidamente. Por otro lado, un amplio grupo de psicólogos opinan que el pensamiento computacional es una destreza fundamental para cualquiera, no sólo para los ingenieros informáticos. Para leer, escribir y realizar operaciones aritméticas, deberíamos utilizar el pensamiento computacional y por lo tanto, para desarrollar todas las habilidades analíticas de los niños. Es necesario cambiar los requerimientos de las destrezas necesarias para trabajar, los nuevos trabajadores necesitarán destrezas más sofisticadas en ciencias, matemáticas, ingeniería y tecnología. Consecuentemente, los contenidos sobre Tecnología de la Información tales como electrónica, programación, robótica y control se incrementan en la educación tecnológica en enseñanza secundaria. El desarrollo y utilización de los Laboratorios Virtuales de Control y Robótica ayuda a alcanzar este objetivo. Nos vamos a centrar en control y robótica porque un proyecto de control y robótica incluye contenidos de otras tecnologías tales como electrónica, programación, … Se ha implementado un sitio web con Laboratorios Virtuales de Control y Robótica. En este trabajo, se muestran seis grupos de laboratorios virtuales para la enseñanza del control y la robótica a niveles preuniversitarios. Estos laboratorios virtuales han sido usados para la docencia de alumnos de enseñanza secundaria. Las estadísticas del proceso de enseñanza-aprendizaje permiten validar ciertos aspectos de dicho trabajo. Se describen dichos laboratorios y la mejora del aprendizaje en cuanto a conocimientos procedimentales y conceptuales, así como la mejora de la interactividad respecto al aprendizaje con análogas aplicaciones con objetivos de aprendizaje idénticos, pero careciendo de la componente de laboratorio virtual. Se explican algunas de las experiencias realizadas con los alumnos. Los resultados sugieren, que dentro de la educación tecnológica de la educación secundaria, los laboratorios virtuales pueden ser explotados como un efectivo y motivacional entorno de aprendizaje. ABSTRACT Recently, there has been a surge of interest in learning to code, focusing especially on career opportunities. It is easy to understand why: the number of jobs for programmers and computer scientists is growing rapidly. On the other hand, the psychologists think that computational thinking is a fundamental skill for everyone, not just for computer scientists. To reading, writing, and arithmetic, we should add computational thinking to every child’s analytical ability. It is necessary to change workforce requirements mean that new workers will need ever more sophisticated skills in science, mathematics, engineering and technology. Consequently, the contents about Information Technology as well as electronics, coding, robotics and control increase in Technology Education in High School . The development and utilization of the Virtual Laboratories of Control and Robotics help to achieve this goal. We focus on control and robotics because a control and robotics project includes other technologies contents like electronics, coding,... A web site with Virtual Laboratories of Control and Robotics was implemented. In this work, six groups of virtual laboratories for teaching control and robotics in preuniversity level are shown. These Virtual Laboratories were used for teaching students at high school. The statistics of teaching-learning process allow to check some issues of this work. The laboratories, the improvement of learning (concepts and procedures) and interactivity are described and are compared to similar applications. They share identical learning objectives but they lack the virtual laboratory aspect. Some experiences with students are explained too. The results suggest that within high school technology education, virtual laboratories can be exploited as effective and motivational learning environments.

Diseño y realización de una base de datos para el control de inventario del Museo Historia de la Informática

El objetivo principal de este proyecto es la realización de un sistema, que permita a través de alguna herramienta accesible a cualquier usuario, poder interactuar con una base de datos que contenga un catálogo bien documentado de los objetos disponibles en el Museo Histórico de la Informática (MHI) perteneciente a la Escuela Técnica Superior de Ingenieros Informáticos (ETSIINF) de la Universidad Politécnica de Madrid (UPM). Hasta el momento, no existía inventario alguno, por lo que la contribución del trabajo que aquí se presenta, supone un gran avance en la organización de los fondos del Museo. Ello contribuirá al desarrollo del objetivo principal del MHI, que es la difusión de la historia de la informática, mediante un medio de los más usados hoy en día, internet. El trabajo realizado se presenta a lo largo de 10 capítulos. En los que se muestran, el análisis del problema, los requisitos y las distintas alternativas posibles de solución, así como la solución adoptada y su desarrollo, tanto en el diseño de la base de datos como de sitio Web que hace posible la visualización e interacción de la información. En el primer capítulo, se puede encontrar una breve introducción del proyecto. Se indican los objetivos, la motivación y el alcance del mismo. En el segundo capítulo, se muestran los requisitos del problema, se analizan las tecnologías, herramientas y lenguajes disponibles para diseñar bases de datos, y se propone la elección de una de las tecnologías, teniendo en cuenta las limitaciones del entorno en el cual se va a implantar la solución. En el tercer capítulo, se diseña la solución propuesta para el sistema. Primero se muestra el diseño de bajo nivel, que serán los cimientos y posteriormente se explica el diseño de alto nivel. Finalmente, se introduce el conjunto de pruebas que el sistema tendrá que pasar para garantizar su correcto funcionamiento. El cuarto capítulo, muestra todas las tecnologías, herramientas, lenguajes y plantillas utilizadas para la implementación de la WEB. Mientras que en el capítulo cinco, se pueden ver los resultados de las pruebas realizadas. En el capítulo seis, se evalúan los costes económicos de realización de proyecto y se presenta la agenda de actividades y tareas llevadas a cabo para su desarrollo. El séptimo capítulo, resume las contribuciones técnicas del proyecto tratadas en los capítulos anteriores, así como las conclusiones personales. Mientras que, el capítulo ocho, apunta una serie de trabajos futuros que se podrían realizarse utilizando como base este proyecto. El capítulo nueve contiene las referencias de la información que se han consultado y que se citan en el texto, y el décimo complementa este proceso de información, incluyendo un glosario de términos técnicos. El contenido de la memoria concluye con el manual de usuario para la administración de la base de datos, que se incluye en forma de anexo.---ABSTRACT---The main goal of this project is the development of a system that would allow through some accessible tool for any user to interact with a database that contains a well-documented objects available in the Computer History Museum's (MHI) catalog, which belongs to the School of Computer Engineers (ETSIINF) of the Polytechnic University of Madrid (UPM). So far, there was no inventory, so the contribution of the work presented here, is a breakthrough in the organization of the Museum's collections. This will contribute to the development of the main goal of the MHI, which is the diffusion of computer history, by means of the most used today, internet. The work is presented along 10 chapters. Which show the analysis of the problem, requirements, the different possible solutions and the solution adopted and its development, both in the design of the database and Web site, which enables the visualization and interaction of the information. In the first chapter, a brief introduction of the project is found. Objectives, motivation and scope of the project are specified. In the second chapter, the requirements of the problem are shown. Technologies, tools and languages available to design databases are analysed, and the choice of a technology is proposed, taking into account the limitations of the environment in which it will to implement the solution. In the third chapter, the proposed system solution is designed. First, low-level design, which will be the foundation of the project, is shown, and then the high-level design is explained. Finally, test suite, which the system will have to past to ensure their proper functioning, are introduced. The fourth chapter shows all technologies, tools, languages and templates used to implement the WEB. While in chapter five, the results of the tests are shown. The economic costs of development the project are evaluated in chapter six, and the schedule of activities and tasks carried out for this development are shown. The seventh chapter summarizes the technical contributions of the project discussed in previous chapters, as well as personal conclusions. While the eighth chapter, suggests future works that could be made, based on this project. Ninth chapter contains references to information that have been consulted and cited in the text, and the tenth chapter includes a glossary of technical terms, to complement that process of information. Finally an annex includes a user manual for managing the database.

Mixed spermatogenic germ cell nuclear extracts exhibit high base excision repair activity

Spermatogenic cells exhibit a lower spontaneous mutation frequency than somatic tissues in a lacI transgene and many base excision repair (BER) genes display the highest observed level of expression in the testis. In this study, uracil-DNA glycosylase-initiated BER activity was measured in nuclear extracts prepared from tissues obtained from each of three mouse strains. Extracts from mixed spermatogenic germ cells displayed the greatest activity followed by liver then brain for all three strains, and the activity for a given tissue was consistent among the three strains. Levels of various BER proteins were examined by western blot analyses and found to be consistent with activity levels. Nuclear extracts prepared from purified Sertoli cells, a somatic component of the seminiferous epithelium, exhibited significantly lower activity than mixed spermatogenic cell-type nuclear extracts, thereby suggesting that the high BER activity observed in mixed germ cell nuclear extracts was not a characteristic of all testicular cell types. Nuclear extracts from thymocytes and small intestines were assayed to assess activity in a mitotically active cell type and tissue. Overall, the order of tissues/cells exhibiting the greatest to lowest activity was mixed germ cells > Sertoli cells > thymocytes > small intestine > liver > brain.

Highly efficient base excision repair (BER) in human and rat male germ cells

The quality of germ cell DNA is critical for the fate of the offspring, yet there is limited knowledge of the DNA repair capabilities of such cells. One of the main DNA repair pathways is base excision repair (BER) which is initiated by DNA glycosylases that excise damaged bases, followed by incision of the generated abasic (AP) sites. We have studied human and rat methylpurine-DNA glycosylase (MPG), uracil-DNA glycosylase (UNG), and the major AP endonuclease (HAP1/APEX) in male germ cells. Enzymatic activities and western analyses indicate that these enzymes are present in human and rat male germ cells in amounts that are at least as high as in somatic cells. Minor differences were observed between different cellular stages of rat spermatogenesis and spermiogenesis. Repair of methylated DNA was also studied at the cellular level using the Comet assay. The repair was highly efficient in both human and rat male germ cells, in primary spermatocytes as well as round spermatids, compared to rat mononuclear blood cells or hepatocytes. This efficient BER removes frequently occurring DNA lesions that arise spontaneously or via environmental agents, thereby minimising the number of potential mutations transferred to the next generation.

Mechanical bases of frequency tuning and neural excitation at the base of the cochlea: Comparison of basilar-membrane vibrations and auditory-nerve-fiber responses in chinchilla

We review the mechanical origin of auditory-nerve excitation, focusing on comparisons of the magnitudes and phases of basilar-membrane (BM) vibrations and auditory-nerve fiber responses to tones at a basal site of the chinchilla cochlea with characteristic frequency ≈ 9 kHz located 3.5 mm from the oval window. At this location, characteristic frequency thresholds of fibers with high spontaneous activity correspond to magnitudes of BM displacement or velocity in the order of 1 nm or 50 μm/s. Over a wide range of stimulus frequencies, neural thresholds are not determined solely by BM displacement but rather by a function of both displacement and velocity. Near-threshold, auditory-nerve responses to low-frequency tones are synchronous with peak BM velocity toward scala tympani but at 80–90 dB sound pressure level (in decibels relative to 20 microPascals) and at 100–110 dB sound pressure level responses undergo two large phase shifts approaching 180°. These drastic phase changes have no counterparts in BM vibrations. Thus, although at threshold levels the encoding of BM vibrations into spike trains appears to involve only relatively minor signal transformations, the polarity of auditory-nerve responses does not conform with traditional views of how BM vibrations are transmitted to the inner hair cells. The response polarity at threshold levels, as well as the intensity-dependent phase changes, apparently reflect micromechanical interactions between the organ of Corti, the tectorial membrane and the subtectorial fluid, and/or electrical and synaptic processes at the inner hair cells.

Evolução das doses no ambiente do Reator IEA-R1 e tendências com base nos resultados atuais

O Ipen/Cnen-SP possui um Reator de Pesquisa(IEA-R1) em operação desde 1957. Ele utiliza água leve como blindagem, moderador e como fluido refrigerante, o volume desta piscina é de 273m3. Até 1995 a operação do Reator era descontinua, ou seja, operava diariamente sendo desligado no final do dia, a uma potência de 2,0 MW. A partir daquele ano, após algumas modificações de segurança, o Reator passou a operar de forma continua, ou seja, de segunda-feira a quarta-feira sem ser desligado, totalizando 64 horas semanais. A potência também foi aumentando até 4,5 MW em 2012. Em virtude dessas alterações, a saber, operação contínua e do aumento da potência, as doses dos trabalhadores aumentaram e por isso foram realizados vários estudos para diminui-las. Estudos demonstraram que uma das principais limitações para operação de um reator em potência elevada, provém das radiações gama emitidas pelo sódio-24. Outros elementos como magnésio-27, Alumínio-28, Argônio-51, contribuem de forma considerável para a atividade da água da piscina. A introdução de uma camada de água quente em sua superfície, estável e isenta de elementos radioativos com 1,5m a 2m de espessura constituiria uma blindagem às radiações provenientes dos elementos radioativos dissolvidos na água. Estudos de otimização provaram que a instalação da camada quente não era necessária para o regime e potência atual de operação do Reator, pois outros procedimentos adotados eram mais eficazes. A partir desta decisão o serviço de Proteção Radiológica do Reator IEA-R1, montou um programa de avaliação das doses para certificar-se de que elas se mantinham em valores razoáveis baseados em princípios estabelecidos em normas nacionais e internacionais. O intuito deste trabalho é realizar uma análise das doses individuais dos IOE (Individuo Ocupacionalmente Expostos), considerando as mudanças no regime de operação do Reator e sugerir opções de proteção e segurança, viáveis em primeira instância, para reduzir as doses analisadas, visando se chegar aos níveis de referencia de 3 mSv/ano adotados pela instalação em apreço.

Multi-scale approaches to Food Sciences: computational QM and MM explorations at the microscopic level

L'obiettivo principale della politica di sicurezza alimentare è quello di garantire la salute dei consumatori attraverso regole e protocolli di sicurezza specifici. Al fine di rispondere ai requisiti di sicurezza alimentare e standardizzazione della qualità, nel 2002 il Parlamento Europeo e il Consiglio dell'UE (Regolamento (CE) 178/2002 (CE, 2002)), hanno cercato di uniformare concetti, principi e procedure in modo da fornire una base comune in materia di disciplina degli alimenti e mangimi provenienti da Stati membri a livello comunitario. La formalizzazione di regole e protocolli di standardizzazione dovrebbe però passare attraverso una più dettagliata e accurata comprensione ed armonizzazione delle proprietà globali (macroscopiche), pseudo-locali (mesoscopiche), ed eventualmente, locali (microscopiche) dei prodotti alimentari. L'obiettivo principale di questa tesi di dottorato è di illustrare come le tecniche computazionali possano rappresentare un valido supporto per l'analisi e ciò tramite (i) l’applicazione di protocolli e (ii) miglioramento delle tecniche ampiamente applicate. Una dimostrazione diretta delle potenzialità già offerte dagli approcci computazionali viene offerta nel primo lavoro in cui un virtual screening basato su docking è stato applicato al fine di valutare la preliminare xeno-androgenicità di alcuni contaminanti alimentari. Il secondo e terzo lavoro riguardano lo sviluppo e la convalida di nuovi descrittori chimico-fisici in un contesto 3D-QSAR. Denominata HyPhar (Hydrophobic Pharmacophore), la nuova metodologia così messa a punto è stata usata per esplorare il tema della selettività tra bersagli molecolari strutturalmente correlati e ha così dimostrato di possedere i necessari requisiti di applicabilità e adattabilità in un contesto alimentare. Nel complesso, i risultati ci permettono di essere fiduciosi nel potenziale impatto che le tecniche in silico potranno avere nella identificazione e chiarificazione di eventi molecolari implicati negli aspetti tossicologici e nutrizionali degli alimenti.

Effects of microstructure, temperature and R-ratio on fatigue crack propagation and threshold behaviour in two Ni-base alloys

Fatigue crack propagation and threshold data for two Ni-base alloys, Astroloy and Nimonic 901, are reported. At room temperature the effect which altering the load ratio (R-ratio) has on fatigue behaviour is strongly dependent on grain size. In the coarse grained microstructures crack growth rates increase and threshold values decrease markedly as R rises from 0. 1 to 0. 8, whereas only small changes in behaviour occur in fine grained material. In Astroloy, when strength level and gamma grain size are kept constant, there is very little effect of processing route and gamma prime distribution on room temperature threshold and crack propagation results. The dominant microstructural effect on this type of fatigue behaviour is the matrix ( gamma ) grain size itself.

Semantic Search of Internet Information Resources on Base of Ontologies and Multilinguistic Thesauruses

The approaches to the analysis of various information resources pertinent to user requirements at a semantic level are determined by the thesauruses of the appropriate subject domains. The algorithms of formation and normalization of the multilinguistic thesaurus, and also methods of their comparison are given.

An empirical investigation on firm-level performance of cross border mergers and acquisitions

This empirical study investigates the performance of cross border M&A. The first stage is to identify the determinants of making cross border M&A complete. One focus here is to extend the existing empirical evidence in the field of cross border M&A and exploit the likelihood of M&A from a different perspective. Given the determinants of cross border M&A completions, the second stage is to investigate the effects of cross border M&A on post-acquisition firm performance for both targets and acquirers. The thesis exploits a hitherto unused data base, which consists of those firms that are rumoured to be undertaking M&A, and then follow the deal to completion or abandonment. This approach highlights a number of limitations to the previous literature, which relies on statistical methodology to identify potential but non-existent mergers. This thesis changes some conventional understanding for M&A activity. Cross border M&A activity is underpinned by various motives such as synergy, management discipline, and acquisition of complementary resources. Traditionally, it is believed that these motives will boost the international M&A activity and improve firm performance after takeovers. However, this thesis shows that such factors based on these motives as acquirer’s profitability and liquidity and target’s intangible resource actually deter the completion of cross border M&A in the period of 2002-2011. The overall finding suggests that the cross border M&A is the efficiency-seeking activity rather than the resource-seeking activity. Furthermore, compared with firms in takeover rumours, the completion of M&A lowers firm performance. More specifically, the difficulties in transfer of competitive advantages and integration of strategic assets lead to low firm performance in terms of productivity. Besides, firms cannot realise the synergistic effect and managerial disciplinary effect once a cross border M&A is completed, which suggests a low post-acquisition profitability level.

Monetary efficacy in the community level

Hypothesis of the paper is that the monetary room for manoeuvre in the European Community is determined by the institutional and strategic characteristics of the ECB, moreover the financial market environment composed by multi-state community. The methodology of the paper is built on the evaluation of the decision making and strategy of ECB as institutional aspect, and the monetary transmission in national financial markets. In policy evaluation, the monetary targeting is surveyed through HICP, monetary base, central bank rates, exchange rates and treatment of price impacts. The transmission is examined through analysis of structure of the member state’s financial markets.

Indication strength of coenological similarity patterns based on genus-level taxon lists and prevalence distribution

Several methods and indicators can be used to evaluate the coenological state of a given habitat, the ones which can be created simply, quickly, standardizably and reliably and which can be used to exactly quantify the state of a given habitat in point of numbers can be of outstanding practical importance in ecology. One possible method is the examination of the genera which can be found in a given habitat in great abundance and have little number of species and various ecological characteristics. For this purpose one of the most appropriate groups is that of ground-dwelling oribatid mites (Acari: Oribatida). In our research, joining the bioindication methodological project of the “Adaptation to Climate Change” Research Group of the Hungarian Academy of Sciences, the indication strength of genus-level taxon lists and the effects of the main pattern-generating factors creating similarity patterns were analysed with the help of data series on oribatid mites collected by us and originating from literature. Our aim was to develop a method with the help of which the difference expressed with distance functions between two oribatid mite genus lists originating from any sources can correspond to spatial and temporal scales. Our results prove that these genus lists are able to express the spatial distance of the habitats. With the help of this base of comparison changes in disturbed or transformed habitats can be expressed by means of oribatid mite communities, with spatial and temporal distances.