Biotechnological Utilization of Biodiesel-Derived Glycerol for the Production of Ribonucleotides and Microbial Biomass

Ten yeast strains were evaluated concerning their capabilities to assimilate biodiesel-derived glycerol in batch cultivation. The influence of glycerol concentration, temperature, pH and yeast extract concentration on biomass production was studied for the yeast selected. Further, the effect of agitation on glycerol utilization by the yeast Hansenula anomala was also studied. The yeast H. anomala CCT 2648 showed the highest biomass yield (0.30 g g(-1)) and productivity (0.19 g L-1 h(-1)). Citric acid, succinic acid, acetic acid and ethanol were found as the main metabolites produced. The increase of yeast extract concentration from 1 to 3 g L-1 resulted in high biomass production. The highest biomass concentration (21 g L-1), yield (0.45 g g(-1)) and productivity (0.31 g L-1 h(-1)), as well as ribonucleotide production (13.13 mg g(-1)), were observed at 700 rpm and 0.5 vvm. These results demonstrated that glycerol from biodiesel production process showed to be a feasible substrate for producing biomass and ribonucleotides by yeast species.

Glycerine derived from biodiesel production as a feedstuff for broiler diets

The performance, carcass traits, and litter humidity of broilers fed increasing levels of glycerine derived from biodiesel production were evaluated. In this experiment, 1,575 broilers were distributed according to a completely randomized experimental design into five treatments with seven replicates of 45 birds each. Treatments consisted of a control diet and four diets containing 2.5, 5.0, 7.5, or 10% glycerine. The experimental diets contained equal nutritional levels and were based on corn, soybean meal and soybean oil. The glycerine included in the diets contained 83.4% glycerol, 1.18% sodium, and 208 ppm methanol, and a calculated energy value of 3,422 kcal AMEn/kg. Performance parameters (weight gain, feed intake, feed conversion ratio, live weight, and livability) were monitored when broilers were 7, 21, and 42 days of age. On day 43, litter humidity was determined in each pen, and 14 birds/treatment were sacrificed for the evaluation of carcass traits. During the period of 1 to 7 days, there was a positive linear effect of the treatments on weight gain, feed intake, and live weight gain. Livability linearly decreased during the period of 1 to 21 days. During the entire experimental period, no significant effects were observed on performance parameters or carcass traits, but there was a linear increase in litter humidity. Therefore, the inclusion of up to 5% glycerine in the diet did not affect broiler performance during the total rearing period.

Life cycle assessment of biodiesel production from micro-algae: a case study in Denmark

Le sperimentazioni riguardanti la produzione di biodiesel da alghe sono state condotte solo in laboratorio o in impianti pilota e il processo produttivo non è ancora stato sviluppato su scala industriale. L’obiettivo di questo lavoro di tesi è stato quello di valutare la potenziale sostenibilità ambientale ed energetica della produzione industriale di biodiesel da microalghe nella realtà danese ipotizzando la coltivazione in fotobioreattori. La tesi ha analizzato le diverse tecnologie attualmente in sperimentazione cercando di metterne in evidenza punti di forza e punti di debolezza. La metodologia applicata in questa tesi per valutare la sostenibilità ambientale ed energetica dei processi analizzati è LCA strumento che permette di effettuare la valutazione sull’intero ciclo di vita di un prodotto o di un processo. L’unità funzionale scelta è 1 MJ di biodiesel. I confini del sistema analizzato comprendono: coltivazione, raccolta, essicazione, estrazione dell’olio, transesterificazione, digestione anaerobica della biomassa residuale e uso del glicerolo ottenuto come sottoprodotto della transesterificazione. Diverse categorie d’impatto sono state analizzate. In questo caso studio, sono stati ipotizzati 24 diversi scenari differenziati in base alle modalità di coltivazione, di raccolta della biomassa, di estrazione dell’olio algale. 1. la produzione di biodiesel da microalghe coltivate in fotobioreattori non appare ancora conveniente né dal punto di vista energetico né da quello ambientale. 2. l’uso di CO2 di scarto e di acque reflue per la coltivazione, fra l’altro non ancora tecnicamente realizzabili, migliorerebbero le prestazioni energetiche ed ambientali del biodiesel da microalghe 3. la valorizzazione di prodotti secondari svolge un ruolo importante nel processo e nel suo sviluppo su larga scala Si conclude ricordando che il progetto di tesi è stato svolto in collaborazione con la Danish Technical University of Denmark (DTU) svolgendo presso tale università un periodo di tirocinio per tesi di sei mesi

Design and Use of an Alternative Fuel Testing Apparatus and Assessment of the Feasibility of Biodiesel

Petroleum supply and environmental pollution issues constantly increase interest in renewable low polluting alternative fuels. Published test results show decreased pollution with similar power output and fuel consumption from Internal Combustion Engines (ICE) burning alternative fuels. More specifically, diesel engines burning biodiesel derived from plant oils and animal fats not only reduce harmful exhaust emissions but are renewable and environmentally friendly. To validate these claims and assess the feasibility of alternative fuels, independent engine dynamometer and emissions testing was performed. A testing apparatus capable of making relevant measurements was designed, built, and used to test and determine the feasibility of biodiesel. The apparatus marks the addition of a valuable testing tool to the University and provides a foundation for future experiments. This thesis will discuss the background of biodiesel, testing methods, design and function of the testing apparatus, experimental results, relevant calculations, and conclusions.

Biochemical Conversions of Lignocellulosic Biomass for Sustainable Fuel-Ethanol Production in the Upper Midwest

Biofuels are an increasingly important component of worldwide energy supply. This research aims to understand the pathways and impacts of biofuels production, and to improve these processes to make them more efficient. In Chapter 2, a life cycle assessment (LCA) is presented for cellulosic ethanol production from five potential feedstocks of regional importance to the upper Midwest - hybrid poplar, hybrid willow, switchgrass, diverse prairie grasses, and logging residues - according to the requirements of Renewable Fuel Standard (RFS). Direct land use change emissions are included for the conversion of abandoned agricultural land to feedstock production, and computer models of the conversion process are used in order to determine the effect of varying biomass composition on overall life cycle impacts. All scenarios analyzed here result in greater than 60% reduction in greenhouse gas emissions relative to petroleum gasoline. Land use change effects were found to contribute significantly to the overall emissions for the first 20 years after plantation establishment. Chapter 3 is an investigation of the effects of biomass mixtures on overall sugar recovery from the combined processes of dilute acid pretreatment and enzymatic hydrolysis. Biomass mixtures studied were aspen, a hardwood species well suited to biochemical processing; balsam, a high-lignin softwood species, and switchgrass, an herbaceous energy crop with high ash content. A matrix of three different dilute acid pretreatment severities and three different enzyme loading levels was used to characterize interactions between pretreatment and enzymatic hydrolysis. Maximum glucose yield for any species was 70% oftheoretical for switchgrass, and maximum xylose yield was 99.7% of theoretical for aspen. Supplemental β-glucosidase increased glucose yield from enzymatic hydrolysis by an average of 15%, and total sugar recoveries for mixtures could be predicted to within 4% by linear interpolation of the pure species results. Chapter 4 is an evaluation of the potential for producing Trichoderma reesei cellulose hydrolases in the Kluyveromyces lactis yeast expression system. The exoglucanases Cel6A and Cel7A, and the endoglucanase Cel7B were inserted separately into the K. lactis and the enzymes were analyzed for activity on various substrates. Recombinant Cel7B was found to be active on carboxymethyl cellulose and Avicel powdered cellulose substrates. Recombinant Cel6A was also found to be active on Avicel. Recombinant Cel7A was produced, but no enzymatic activity was detected on any substrate. Chapter 5 presents a new method for enzyme improvement studies using enzyme co-expression and yeast growth rate measurements as a potential high-throughput expression and screening system in K. lactis yeast. Two different K. lactis strains were evaluated for their usefulness in growth screening studies, one wild-type strain and one strain which has had the main galactose metabolic pathway disabled. Sequential transformation and co-expression of the exoglucanase Cel6A and endoglucanase Cel7B was performed, and improved hydrolysis rates on Avicel were detectable in the cell culture supernatant. Future work should focus on hydrolysis of natural substrates, developing the growth screening method, and utilizing the K. lactis expression system for directed evolution of enzymes.

Estudio técnico-económico de una planta de producción de biodiesel

Se explica las posibles razones que han obligado a varias de las plantas de biodiésel en España a cerrar a pesar de estar siendo auspiciadas por la Unión Europea y fomentadas, mediante normativas específicas y ayudas sustanciales en cada uno de los países miembros, a fin de reforzar la utilización de los biocarburantes, como energía alternativa a los combustibles fósiles, debido a las ventajas medioambientales y sociopolíticas que conllevan. Para ello se ha empezado realizando un estudio del sector y de su funcionamiento así como de la evolución reciente del mercado tanto en Europa como en España. Posteriormente se ha modelizado una planta de biodiesel tipo desde las primeras fases de su construcción hasta su puesta en funcionamiento, para, a continuación analizar su desarrollo haciendo especial hincapié en la evolución de las principales variables económicas anteriormente estudiadas que han llevado finalmente a tener que cerrarla por falta de rentabilidad. El proceso de producción del biodiésel desde aceites vegetales y grasas animales mantiene un fuerte crecimiento en los mercados de la Unión Europea al igual que en Estados Unidos y Canadá. La producción de biodiésel se ha incrementado rápidamente en los últimos años, ya que es una alternativa renovable a los carburantes, como el petróleo o el diésel. La producción por trasesterificación de aceites vegetales y grasas animales, dan al biodiésel una densidad, un punto de encendido, viscosidad, estabilidad a la oxidación similares al diésel. Estas propiedades permiten a la mezcla de biodiésel poder usarlo en motores convencionales sin necesidad de grandes modificaciones. El objetivo fundamental de este proyecto es, dentro de un entorno económico hostil, explicar el posible porqué de la situación de las plantas de biodiésel en España, haciendo un análisis de la viabilidad económico – financiera de una planta de producción de biodiésel. La instalación de la que parte el presente proyecto es la de una planta, situada en la provincia de Jaén, con una capacidad de producción de 100 000 t/año, con una previsión de funcionamiento continua y con una vida útil estimada de 15 años. Una vez finalizado el estudio económico, se ha valorado el impacto del mercado en el funcionamiento de la planta, tanto a nivel internacional debido a la competencia desleal, como nacional, debido a las ayudas en los cultivos. Se deduce que la rentabilidad de una planta de biodiésel es relativamente positiva pero viene dada por un gran número de variables internas y externas que hacen un negocio inestable y poco rentable. ABSTRACT It explains the possible reasons that have forced several biodiesel plants in Spain to close in spite of being sponsored by the European Union and promoted by specific regulations and substantial aid in each of the member countries to strengthen the use of biofuels as alternative energy to fossil fuels because of the environmental and sociopolitical involving VII For this we have begun a study of the sector and its operation as well as the recent market developments in Europe and in Spain. Later was modeled biodiesel plant type from the early stages of construction to commissioning, to then analyze its development with particular emphasis on the evolution of the main economic variables that have been previously studied eventually have to close by unprofitability. The processes and production of biodiesel (methyl ester) from vegetable oil and animal fat feedstocks remain a strong growth market in the European Union as well as the United States and Canada. Biodiesel production has increased rapidly in this last years as producers sought a renewable alternative to petroleum fuel. Produced by the trans-esterification of vegetable oils and animal fats, biodiesel has similar density, flash point, viscosity, oxidation stability to petroleum diesel. These similarities enable biodiesel blends to be used in conventional diesel engines without significant modifications. This proyect gives an overview of current developments with regard to biodiesel technology, the Spain biofuel market, and national biofuel policies, looking at closely the economic-financial feasibility of a biodiesel production plant. The installation, situated at Linares (Jaén), has a production capability of 100 000 t/year. The operation estimated is constant and with a product life of 15 years. Finished the part destined to the economic view of this project, it has been considered the adverse effects on the overall performance and the financial situation of the industry. It follows form the study that biodiesel plant´s profitability is relatively high, but it is given by a large numbers of variables, internals and externals, which have made an unviable and unsustainable business.

Production of biodiesel from animal fat using supercritical ethanol

Biodiesel is currently produced from a catalytic transesterification reaction of various types of edible and non-edible oil with methanol. The use of waste animal tallow instead of edible oils opens a route to recycle this waste. This material has the advantage of lower costs but the problem of high content of free fatty acids, becoming necessary a pre-esterification reaction that increases the cost of the catalytic process. The production of biodiesel using supercritical alcohols is appropriate for materials with high acidity and water content, therefore the use of this process with animal fat is a promising alternative. Ethanol has been used because it can be produced from biomass via fermentation resulting in a complete renewable biodiesel, instead of methanol that derives from fossil feedstocks. Two different processes have been studied: first, the direct transesterification of animal fat using supercritical ethanol and second a two-step process where the first step is a hydrolysis of the animal fat and the second step is the esterification of the resulting fatty acids. The temperature, the molar ratio ethanol:fat and the time have been modified in the different reactions to study the effect in the final conversion and the degradation of the unsaturated fatty acid esters, main inconvenient of these high temperature and pressure processes.

Biodiesel production by acid catalysis with heteropolyacids supported on activated carbon fibers

Different catalysts, based on heteropolyacids supported on activated carbon fibers, have been prepared for palmitic acid esterification reaction. The influence of the catalyst (heteropolyacid) and the support on the catalytic activity have been analyzed. The results prove that an adequate combination of both is required to achieve the most suitable catalysts. Regarding to the heteropolyacid, phosphomolybdic acid seems to be the most suitable appropriate taking into account its lowest leaching. About the support, it must show an optimum microporosity, which must be wide enough to allow the entrance and exit of the reagents and products but not too wide in order to avoid the leaching of the catalyst. In addition, both decreasing of the catalytic activity and its recovery over several cycles have been analyzed.

Fuel gas production from solid waste : final report (covering the period June 28, 1973 to December 31, 1974) NSF Contract C-827 ... /

"PB-245 083."

Fuel cells, hydrogen and energy supply in Australia

Australia is unique in terms of its geography, population distribution, and energy sources. It has an abundance of fossil fuel in the form of coal, natural gas, coal seam methane (CSM), oil, and a variety renewable energy sources that are under development. Unfortunately, most of the natural gas is located so far away from the main centres of population that it is more economic to ship the energy as LNG to neighboring countries. Electricity generation is the largest consumer of energy in Australia and accounts for around 50% of greenhouse gas emissions as 84% of electricity is produced from coal. Unless these emissions are curbed, there is a risk of increasing temperatures throughout the country and associated climatic instability. To address this, research is underway to develop coal gasification and processes for the capture and sequestration Of CO2. Alternative transport fuels such as biodiesel are being introduced to help reduce emissions from vehicles. The future role of hydrogen is being addressed in a national study commissioned this year by the federal government. Work at the University of Queensland is also addressing full-cycle analysis of hydrogen production, transport, storage, and utilization for both stationary and transport applications. There is a modest but growing amount of university research in fuel cells in Australia, and an increasing interest from industry. Ceramic Fuel Cells Ltd. (CFCL) has a leading position in planar solid oxide fuel cells (SOFCs) technology, which is being developed for a variety of applications, and next year Perth in Western Australia is hosting a trial of buses powered by proton-exchange fuel cells. (C) 2004 Elsevier B.V. All rights reserved.

Nanoporous solid acid and base catalysts for sustainable biofuels production

Dwindling fossil fuel reserves, and growing concerns over CO2 emissions and associated climate change, are driving the quest for renewable feedstocks to provide alternative, sustainable fuel sources. Catalysis has a rich history of facilitating energy efficient, selective molecular transformations, and in a post-petroleum era will play a pivotal role in overcoming the scientific and engineering barriers to economically viable, and sustainable, biofuels derived from renewable resources. The production of second generation biofuels, derived from biomass sourced from inedible crop components, e.g. agricultural or forestry waste, or alternative non-food crops such as Switchgrass or Jatropha Curcas that require minimal cultivation, necessitate new heterogeneous catalysts and processes to transform these polar and viscous feedstocks [1]. Here we show how advances in the rational design of nanoporous solid acids and bases, and their utilisation in novel continuous reactors, can deliver superior performance in the energy-efficient esterification and transesterification of bio-oil components into biodiesel [2-4]. Notes: [1] K. Wilson, A.F. Lee, Cat. Sci. Tech. 2012 ,2, 884. [2] J. Dhainaut, J.-P. Dacquin, A. F. Lee, K. Wilson, Green Chem. 2010 , 12, 296. [3] C. Pirez, J.-M. Caderon, J.-P. Dacquin, A.F. Lee, K. Wilson, ACS Catal. 2012 , 2, 1607. [4] J.J. Woodford, J.-P. Dacquin, K. Wilson, A.F. Lee, Energy Environ. Sci. 2012 , 5, 6145.