Thermocapillary Flows In Liquid Bridges Of Molten Tin With Small Aspect Ratios

Numerical simulations were conducted to study thermocapillary flows in short half-zone liquid bridges of molten tin with Prandtl number Pr = 0.009, under ramped temperature difference. The spatio-temporal structures in the thermocapillary flows in short half-zone liquid bridges with aspect ratios As = 0.6, 0.8, and 1.0 were investigated. The first critical Marangoni numbers were compared with those predicted by linear stability analyses (LSA). The second critical Marangoni numbers for As = 0.6 and 0.8 were found to be larger than that for As = 1.0. The time evolutions of the thermocapillary flows exhibited unusual features such as a change in the azimuthal wave number during the three-dimensional stationary (non-oscillating) flow regime, a change in the oscillation mode during the three-dimensional oscillatory flow regime, and the decreasing and then increasing of amplitudes in a single oscillation mode. The effects of the ramping rate of the temperature difference on the flow modes and critical conditions were studied as well. In this paper, the experimental observability of the critical conditions was also discussed. (C) 2008 Elsevier Inc. All rights reserved.

Bio-inspired mechanics of reversible adhesion: Orientation-dependent adhesion strength for non-slipping adhesive contact with transversely isotropic elastic materials

Geckos and many insects have evolved elastically anisotropic adhesive tissues with hierarchical structures that allow these animals not only to adhere robustly to rough surfaces but also to detach easily upon movement. In order to improve Our understanding of the role of elastic anisotropy in reversible adhesion, here we extend the classical JKR model of adhesive contact mechanics to anisotropic materials. In particular, we consider the plane strain problem of a rigid cylinder in non-slipping adhesive contact with a transversely isotropic elastic half space with the axis of symmetry oriented at an angle inclined to the surface. The cylinder is then subjected to an arbitrarily oriented pulling force. The critical force and contact width at pull-off are calculated as a function of the pulling angle. The analysis shows that elastic anisotropy leads to an orientation-dependent adhesion strength which can vary strongly with the direction of pulling. This study may suggest possible mechanisms by which reversible adhesion devices can be designed for engineering applications. (C) 2006 Elsevier Ltd. All rights reserved.

Orientation preference and fractal character of short fatigue cracks in a weld metal

Short fatigue crack behaviour in a weld metal has been further investigated. The Schmid factor and the fractal dimension of short cracks on iso-stress specimens subjected to reversed bending have been determined and then applied to account for the distribution and orientation characteristics of short fatigue cracks. The result indicates that the orientation preference of short cracks is attributed to the large values of Schmid factor at relevant grains. The Schmid factors of most slip systems, which produced short cracks, are less than or equal to 0.4. Crack length measurements reveal that short crack path, compared to that of long crack, possesses a more stable and relatively larger value of fractal dimension. This is regarded as one of the typical features of short cracks.

Contribution of Resource-Based View and Entrepreneurial Orientation on Small Firm Growth

[EN] This research provides a useful framework for identifying a small firms’ propensity to engage in entrepreneurial orientation. We examine the impact of the Entrepreneurial Orientation (EO) as a main resource and capability on small firm’ growth. The growth seems to come out as an important demonstration of the entrepreneurial orientation of small firms (Davidsson, 1989; Green and Brown, 1997; Janney and Gregory, 2006). Thus, this research builds on prior conceptual research that suggests a positive integration between entrepreneurial orientation and resource-based view. In the first instance, the research will focus on reviewing literature in the emerging area of entrepreneurial orientation as it applies to growth oriented small firms and resource-based view of the firm. Secondly, an empirical study was developed based on a stratified sample of small firms of manufacturing industry. Data were submitted to a multivariate statistical analysis and a linear regression model was performed in order to predict the influence of the resources and capabilities on small firms’ growth. In this sense, we consider the construct growth as a dependent variable and the ones relates with resources and capabilities (entrepreneur resources, firm resources, networks and EO) as independent variables. The research results suggest a set of resources and capabilities that promote the growth of the small firms. Also, the EO seems to have a predictive value on growth. Explaining variables related with resources and capabilities and EO were identified as essential in growth oriented small firms. It was still possible to conclude that the entrepreneurial firms which grew seem to have resources and develop more capabilities and take advantage in the search for those competences. This attitude reflects on the EO of the firm. This study has important implication for both researchers and practitioners. It highlights the necessity of firms to develop superior EO of all their members and also to invest on better resources and consequently superior capabilities as a way of reaching higher levels of growth. While previous authors have attempted to analyse certain aspects of this process (linkage between entrepreneurial orientation and growth), this research developed a framework that combines these and others factors (resource-based view) pertinent to growth oriented small firms. The results support the necessity to identify explicative variables of multiple levels to explain the growth of small firms. The adoption of an entrepreneurial orientation as an indispensable variable to the growth oriented small firms seems pertinent.

Liderazgo de servicio de los mandos intermedios

[ES] El gran reto de la empresa de servicios en la actualidad es orientarse con mayor precisión a sus clientes y conseguir su satisfacción y lealtad. Si bien el impulso de la innovación, el uso de tecnologías de información, y concretamente la creación de valor son factores decisivos, el gran factor a dirigir con una mejor proyección es el factor humano. Sin un enfoque consistente orientado a la persona, no será posible desarrollar la capacidad de servir al cliente en la organización.

Case study: Technology - a fundamental aspect of teaching, learning and assessment

Case study on how Reading College is taking a holistic approach to developing their digital strategy, focusing on good practice in teaching and learning and extending learning beyond the classroom walls.

Orientation-Dependent Adhesion Strength Of A Rigid Cylinder In Non-Slipping Contact With A Transversely Isotropic Half-Space

Recently, Chen and Gao [Chen, S., Gao, H., 2007. Bio-inspired mechanics of reversible adhesion: orientation-dependent adhesion strength for non-slipping adhesive contact with transversely isotropic elastic materials. J. Mech. Phys. solids 55, 1001-1015] studied the problem of a rigid cylinder in non-slipping adhesive contact with a transversely isotropic solid subjected to an inclined pulling force. An implicit assumption made in their study was that the contact region remains symmetric with respect to the center of the cylinder. This assumption is, however, not self-consistent because the resulting energy release rates at two contact edges, which are supposed to be identical, actually differ from each other. Here we revisit the original problem of Chen and Gao and derive the correct solution by removing this problematic assumption. The corrected solution provides a proper insight into the concept of orientation-dependent adhesion strength in anisotropic elastic solids. (c) 2008 Elsevier Ltd. All rights reserved.

Measurement of velocity profiles in a rectangular microchannel with aspect ratio α = 0.35

In this work, we measured 14 horizontal velocity profiles along the vertical direction of a rectangular microchannel with aspect ratio alpha = h/w = 0.35 (h is the height of the channel and w is the width of the channel) using microPIV at Re = 1.8 and 3.6. The experimental velocity profiles are compared with the full 3D theoretical solution, and also with a Poiseuille parabolic profile. It is shown that the experimental velocity profiles in the horizontal and vertical planes are in agreement with the theoretical profiles, except for the planes close to the wall. The discrepancies between the experimental data and 3D theoretical results in the center vertical plane are less than 3.6%. But the deviations between experimental data and Poiseuille's results approaches 5%. It indicates that 2D Poiseuille profile is no longer a perfect theoretical approximation since a = 0.35. The experiments also reveal that, very near the hydrophilic wall (z = 0.5-1 mu m), the measured velocities are significantly larger than the theoretical velocity based on the no-slip assumption. A proper discussion on some physical effects influencing the near wall velocity measurement is given.