A novel and miniaturized 433/868MHz multi-band wireless sensor platform for body sensor network applications

Body Sensor Network (BSN) technology is seeing a rapid emergence in application areas such as health, fitness and sports monitoring. Current BSN wireless sensors typically operate on a single frequency band (e.g. utilizing the IEEE 802.15.4 standard that operates at 2.45GHz) employing a single radio transceiver for wireless communications. This allows a simple wireless architecture to be realized with low cost and power consumption. However, network congestion/failure can create potential issues in terms of reliability of data transfer, quality-of-service (QOS) and data throughput for the sensor. These issues can be especially critical in healthcare monitoring applications where data availability and integrity is crucial. The addition of more than one radio has the potential to address some of the above issues. For example, multi-radio implementations can allow access to more than one network, providing increased coverage and data processing as well as improved interoperability between networks. A small number of multi-radio wireless sensor solutions exist at present but require the use of more than one radio transceiver devices to achieve multi-band operation. This paper presents the design of a novel prototype multi-radio hardware platform that uses a single radio transceiver. The proposed design allows multi-band operation in the 433/868MHz ISM bands and this, together with its low complexity and small form factor, make it suitable for a wide range of BSN applications.

Microneedle platform for continuous monitoring of biomarkers in interstitial fluid

Science Foundation Ireland (CSET - Centre for Science, Engineering and Technology, Grant No. 07/CE/11147)

Explorations in a meaning making system: Kerry as an entrepreneurial platform and the equine sector as a cluster

This Portfolio is about the changes that can be supported and achieved through transformational education that impacts on personal, professional and organisational levels. Having lived through an era of tremendous change over the second half of the twentieth century and into the twenty-first the author has a great drawing board to contemplate in the context of professional career experience as an engineer. The ability to engage in ‘subject-object’ separation is the means by which Kegan (1994, 2009) explains that transformation takes place and the Essays in this Portfolio aim to support and bring about such change. Exploration of aspects of ‘Kerry’ is the material selected to both challenge support change in the way of knowing from being subject to certain information and knowledge that to being able to consider it more objectively. The task of being able to distance judgement about the economy and economic development of Kerry was facilitated by various readings around of a number of key thinkers including Kegan, Drucker, Porter and Penrose. The central themes of Kerry or the potential for economic development are built into each Essay. Essay One focuses on reflections of Kerry life - on Kerry people within and without Kerry - and events as they affected understandings of how people related to and worked with one another. These reflections formed the basis for transformational goals identified which required a shift from an engineering mindset to encompass an economics-based view. In Essay Two knowledge of economic concepts is developed by exploring the writings of Drucker, Penrose, and Porter with pertinence to considering economic development generally, and for Kerry in particular in the form of an ‘entrepreneurial platform’. The concepts and theories were the basis of explorations presented in Essays Three and Four. Essay Three focuses on Kerry’s potential for economic development give its current economic profile and includes results from interviews with selected businesses. Essay Four is an exercise in the application of Porter’s ‘Cluster’ concept to the equine sector.

Developing a health and wellbeing platform in a living lab setting: An action design research study

The world’s population is rapidly aging, which affects healthcare budgets, resources, pensions and social security systems. Although most older adults prefer to live independently in their own home as long as possible, smart living solutions to support elderly people at home did not reach mass adoption, yet. To support people age-in-place a Living Lab is established in one of the metropolitan areas in the Netherlands. The main goal of the Living Lab is to develop an online health and wellbeing platform that matches service providers, caretakers and users and to implement that platform in one particular city district. In this paper we describe the narrative of the action design research process that will give researchers insight how to deal with complex multi-stakeholder design projects as well as cooperation issues to develop an artifact in a real-life setting.

A highly efficient sensor platform using simply manufactured nanodot patterned substrates

Block copolymer (BCP) self-assembly is a low-cost means to nanopattern surfaces. Here, we use these nanopatterns to directly print arrays of nanodots onto a conducting substrate (Indium Tin Oxide (ITO) coated glass) for application as an electrochemical sensor for ethanol (EtOH) and hydrogen peroxide (H

A method of assessing air toxics concentrations in urban areas using mobile platform measurements.

The objective of this paper is to demonstrate an approach to characterize the spatial variability in ambient air concentrations using mobile platform measurements. This approach may be useful for air toxics assessments in Environmental Justice applications, epidemiological studies, and environmental health risk assessments. In this study, we developed and applied a method to characterize air toxics concentrations in urban areas using results of the recently conducted field study in Wilmington, DE. Mobile measurements were collected over a 4- x 4-km area of downtown Wilmington for three components: formaldehyde (representative of volatile organic compounds and also photochemically reactive pollutants), aerosol size distribution (representing fine particulate matter), and water-soluble hexavalent chromium (representative of toxic metals). These measurements were,used to construct spatial and temporal distributions of air toxics in the area that show a very strong temporal variability, both diurnally and seasonally. An analysis of spatial variability indicates that all pollutants varied significantly by location, which suggests potential impact of local sources. From the comparison with measurements at the central monitoring site, we conclude that formaldehyde and fine particulates show a positive correlation with temperature, which could also be the reason that photochemically generated formaldehyde and fine particulates over the study area correlate well with the fine particulate matter measured at the central site.

A location-based communication platform: integrating file sharing with interpersonal contact

Gemstone Team FLIP (File Lending in Proximity)

Development of a Novel c-MET-Based CTC Detection Platform.

UNLABELLED: Amplification of the MET oncogene is associated with poor prognosis, metastatic dissemination, and drug resistance in many malignancies. We developed a method to capture and characterize circulating tumor cells (CTC) expressing c-MET using a ferromagnetic antibody. Immunofluorescence was used to characterize cells for c-MET, DAPI, and pan-CK, excluding CD45(+) leukocytes. The assay was validated using appropriate cell line controls spiked into peripheral blood collected from healthy volunteers (HV). In addition, peripheral blood was analyzed from patients with metastatic gastric, pancreatic, colorectal, bladder, renal, or prostate cancers. CTCs captured by c-MET were enumerated, and DNA FISH for MET amplification was performed. The approach was highly sensitive (80%) for MET-amplified cells, sensitive (40%-80%) for c-MET-overexpressed cells, and specific (100%) for both c-MET-negative cells and in 20 HVs. Of 52 patients with metastatic carcinomas tested, c-MET CTCs were captured in replicate samples from 3 patients [gastric, colorectal, and renal cell carcinoma (RCC)] with 6% prevalence. CTC FISH demonstrated that MET amplification in both gastric and colorectal cancer patients and trisomy 7 with gain of MET gene copies in the RCC patient. The c-MET CTC assay is a rapid, noninvasive, sensitive, and specific method for detecting MET-amplified tumor cells. CTCs with MET amplification can be detected in patients with gastric, colorectal, and renal cancers. IMPLICATIONS: This study developed a novel c-MET CTC assay for detecting c-MET CTCs in patients with MET amplification and warrants further investigation to determine its clinical applicability. Mol Cancer Res; 14(6); 539-47. ©2016 AACR.

A LabVIEW Platform for Preclinical Imaging Using Digital Subtraction Angiography and Micro-CT.

CT and digital subtraction angiography (DSA) are ubiquitous in the clinic. Their preclinical equivalents are valuable imaging methods for studying disease models and treatment. We have developed a dual source/detector X-ray imaging system that we have used for both micro-CT and DSA studies in rodents. The control of such a complex imaging system requires substantial software development for which we use the graphical language LabVIEW (National Instruments, Austin, TX, USA). This paper focuses on a LabVIEW platform that we have developed to enable anatomical and functional imaging with micro-CT and DSA. Our LabVIEW applications integrate and control all the elements of our system including a dual source/detector X-ray system, a mechanical ventilator, a physiological monitor, and a power microinjector for the vascular delivery of X-ray contrast agents. Various applications allow cardiac- and respiratory-gated acquisitions for both DSA and micro-CT studies. Our results illustrate the application of DSA for cardiopulmonary studies and vascular imaging of the liver and coronary arteries. We also show how DSA can be used for functional imaging of the kidney. Finally, the power of 4D micro-CT imaging using both prospective and retrospective gating is shown for cardiac imaging.

Evaluation of a suitable learning style for iLearn: a personalised e-learning platform

Brusilovsky and Millan (2007) state that learning styles are typically defined as the way people prefer to learn. Learning styles and how we learn is a vast research area and many research projects (SMILE, INSPIRE, iWeaver amongst others) attempt to incorporate these learning styles into e-Learning systems. This paper describes commonly used learning styles and how they are currently being used within the area of adaptive e-Learning. This work also builds upon current research and evaluates learning styles using criteria proposed by Sampson and Karagiannidis (2004) in order to select a suitable learning methodology for the iLearn e-Learning platform. The Sampson and Karagiannidis (2004) criteria is adapted for the purpose of the research and describes the measurability, time effectiveness and descriptiveness and prescriptiveness of the specific learning style. A suitable learning style for the iLearn e-Learning platform is then proposed within the paper and finally the research briefly introduces how the chosen learning style will be used for the proposed e-Learning platform.

Platform-Independent IP Transmission over Wireless Networks: The WINE Approach

First demonstration of a working dynamically configurable architecture for wireless IP networks. The programmable architecture was as result of a European collaboration between Industry and University and was applied to a range of IP wireless networks. The work laid the foundations for subsequent research initiatives (including the UK) into programmable wireless networks as well as influencing future wireless standards (e.g. ITU-T).EU project WINE (Wireless Internet NEtworking), -1999-10028.

Sensor technologies based on a cellulose supported platform

A simple approach to sensor development based on encapsulating a probe molecule in a cellulose support followed by regeneration from an ionic liquid solution is demonstrated here by the codissolution of cellulose and 1-(2-pyridylazo)-2-naphthol in 1-butyl-3-methylimidazolium chloride followed by regeneration with water to form strips which exhibit a proportionate (1 : 1) response to Hg(II) in aqueous solution.