The fabrication of biodegradable nanospheres from novel hydroxalkanoates for the delivery of actives of pharmaceutical and agricultural interest

This work describes the fabrication of nanospheres from a range of novel polyhydroxyalkanoates supplied by Monsanto, St Louis, Missouri, USA for the delivery of selected actives of both pharmaceutical and agricultural interest. Initial evaluation of established microsphere and nanosphere fabrication techniques resulted in the adoption and optimisation of a double sonication solvent evaporation method involving the synperonic surfactant F68. Nanospheres could be consistently generated with this method. Studies on the incorporation and release of the surrogate protein Bovine Serum Albumin V demonstrated that BSA could be loaded with between 10-40% w/w BSA without nanosphere destabilisation. BSA release from nanospheres into Hanks Balanced Salts Solution, pH 7.4, could be monitored for up to 28 days at 37°C. The incorporation and release of the Monsanto actives - the insecticide Admire® ({ 1-[(6-chloro-3-pyridinyl)methyIJ-N-nitro-2-imidazolidinimine}) and the plant growth hormone potassium salt Gibberellic acid (GA3K) from physico-chemically characterised polymer nanospheres was monitored for up to 37 days and 28 days respectively, at both 4°C and 23°C. Release data was subsequently fitted to established kinetic models to elaborate the possible mechanisms of release of actives from the nanospheres. The exposure of unloaded nanospheres to a range of physiological media and rural rainwater has been used to investigate the role polymer biodegradation by enzymatic and chemical means might play in the in vivo release of actives and agricultural applications. The potential environmental biodegradation of Monsanto polymers has been investigated using a composting study (International Standard ISO/FDIS 14855) in which the ultimate aerobic biodegradation of the polymers has been monitored by the analysis of evolved carbon dioxide. These studies demonstrated the potential of the polymers for use in the environment, for example as a pesticide delivery system.

The influence of environment on foliose lichen growth and its biological significance

Radial growth and growth in mass of lichens is influenced by climatic and microclimatic factors and also by substratum factors such as rock and bark texture, chemistry, and nutrient enrichment. Seasonal fluctuations in growth, as measured by radial growth rate (RaGR) per month, often correlate best with average or total rainfall, the number of rain days, or rainfall in a specific season. Temperature is also considered to be an important climatic factor in some studies. Interactions between microclimatic factors and especially light intensity, temperature, and moisture are the most important in determining local annual growth rates. The physical and chemical nature of the substratum has a profound influence on the growth of foliose lichens. Hence, the effects of texture, porosity, rate of drying, and the physical changes of the substratum on growth are likely to influence lichen distributions. Bird droppings may influence growth and survival by smothering the thalli, altering the pH, or adding inhibitory and stimulatory compounds. Nitrogen and phosphate availability may also influence growth. Chemical factors may also have an important influence on lichens of maritime rocks, the effect of salinity and calcium ions being of particular importance. Zinc, copper, and mercury may also be important in lichen growth as they have been shown to affect the chlorophyll content of lichen algae. Effects of environmental factors on growth influence the competitive ability of lichens thus influencing their ecology and distribution.

The potential application of pyroligneous acid in the UK agricultural industry

This paper highlights the potential benefits of smoke recovery from the production of biochar in crop management through it application as an antimicrobial agent against plant disease and as a pesticide. The study reports on the findings of zone inhibition assays on selected plant pathogens (Agrobacterium tumefacien and Xanthomonas campestris), growth studies on selected plants (Raphanus sativus and Vicia faba), and toxicity studies performed on arthropods (Myzus persicae and Tetranychus urticae). The results suggested a strong benefit to crop management in terms of crop protection against selected causal agents responsible for plant disease, with zones of inhibition observed on both Agrobacterium tumefacien and Xanthomonas campestris when inoculated with pyroligneous acid (liquid smoke) at 10% dilution. Similarly, its potential as a bio-pesticide are favorable, with a reported 20%–30% of arthropods affected (knocked out/mortality) after exposure for 48 hours.

Regional growth, structural change, and natural disaster

Hurricanes, earthquakes, floods, and other serious natural hazards have been attributed with causing changes in regional economic growth, income, employment, and wealth. Natural disasters are said to cause; (1) an acceleration of existing economic trends; (2) an expansion of employment and income, due to recovery operations (the so-called silver lining); and (3) an alteration in the structure of regional economic activity due to changes in "intra" and "inter" regional trading patterns, and technological change.^ Theoretical and stylized disaster simulations (Cochrane 1975; Haas, Cochrane, and Kates 1977; Petak et al. 1982; Ellson et al. 1983, 1984; Boisvert 1992; Brookshire and McKee 1992) point towards a wide scope of possible negative and long lasting impacts upon economic activity and structure. This work examines the consequences of Hurricane Andrew on Dade County's economy. Following the work of Ellson et al. (1984), Guimaraes et al. (1993), and West and Lenze (1993; 1994), a regional econometric forecasting model (DCEFM) using a framework of "with" and "without" the hurricane is constructed and utilized to assess Hurricane Andrew's impact on the structure and level of economic activity in Dade County, Florida.^ The results of the simulation exercises show that the direct economic impact associated with Hurricane Andrew on Dade County is of short duration, and of isolated sectoral impact, with impact generally limited to construction, TCP (transportation, communications, and public utilities), and agricultural sectors. Regional growth, and changes in income and employment reacted directly to, and within the range and direction set by national economic activity. The simulations also lead to the conclusion that areal extent, infrastructure, and sector specific damages or impacts, as opposed to monetary losses, are the primary determinants of a disaster's effects upon employment, income, growth, and economic structure. ^

Hydro-physical characterization of media used in agricultural systems to develop the best management practices for operation of an environmentally sustainable agricultural enterprise

Florida is the second leading horticulture state in the United States with a total annual industry sale of over $12 Billion. Due to its competitive nature, agricultural plant production represents an extremely intensive practice with large amounts of water and fertilizer usage. Agrochemical and water management are vital for efficient functioning of any agricultural enterprise, and the subsequent nutrient loading from such agricultural practices has been a concern for environmentalists. A thorough understanding of the agrochemical and the soil amendments used in these agricultural systems is of special interest as contamination of soils can cause surface and groundwater pollution leading to ecosystem toxicity. The presence of fragile ecosystems such as the Everglades, Biscayne Bay and Big Cypress near enterprises that use such agricultural systems makes the whole issue even more imminent. Although significant research has been conducted with soils and soil mix, there is no acceptable method for determining the hydraulic properties of mixtures that have been subjected to organic and inorganic soil amendments. Hydro-physical characterization of such mixtures can facilitate the understanding of water retention and permeation characteristics of the commonly used mix which can further allow modeling of soil water interactions. The objective of this study was to characterize some of the locally and commercially available plant growth mixtures for their hydro-physical properties and develop mathematical models to correlate these acquired basic properties to the hydraulic conductivity of the mixture. The objective was also to model the response patterns of soil amendments present in those mixtures to different water and fertilizer use scenarios using the characterized hydro-physical properties with the help of Everglades-Agro-Hydrology Model. The presence of organic amendments helps the mixtures retain more water while the inorganic amendments tend to adsorb more nutrients due to their high surface area. The results of these types of characterization can provide a scientific basis for understanding the non-point source water pollution from horticulture production systems and assist in the development of the best management practices for the operation of environmentally sustainable agricultural enterprise

Enhanced Growth of Tetracycline-susceptible Soil Bacteria Treated with Iron and Oxytetracycline

Antibiotic resistance has become an important area of research because of the excessive use of antibiotics in clinical and agricultural settings that are driving the evolution of antibiotic resistant bacteria. However, drug tolerance is a naturally occurring phenomenon in soil communities, and is often linked to those soils that are exposed to heavy metals as well as antibiotics. Resistance to antibiotics maybe coupled with resistance to heavy metals in soil bacteria through efflux pumps that can be regulated by iron. Although considered s a heavy metal, iron is an essential component of life that regulates gene expression through the Ferric Uptake Regulator (Fur) protein. This master regulator protein is known to control siderophore production, and other biological pathways. As a suspected controller of biofilm formation, the role of Fur in environmental antibiotic resistance may be greater than is currently realized. In this study, we sought to explore a potential Fur-regulated drug tolerance pathway by understanding the response of soil bacteria when stressed with oxytetracycline and iron. Bacteria were collected from two locations in Miami Dade County. Isolates were first tested using Kirby-Bauer Disk Diffusion tests for antibiotic resistance/susceptibility and identified by 16S rDNA sequencing. A 96-well growth assay was developed to measure planktonic cell growth with 3 mM FeCl3, Oxytetracycline HCl, and the combination treatments. A Microtiter Dish Biofilm Formation Assay was employed and Fur diversity was evaluated. Tetracycline-susceptible bacterial isolates developed drug resistance with iron supplementation, but iron did not enhance biofilm formation. Development of a Fur-dependent drug resistance may be selected for, but further study is required to evaluate Fur evolution in the studied isolates. Gene expression analysis is also needed to further understand the ecological role of Fur and antibiotic resistance.

Effects of vermicomposted spent mushroom compost on growing medium characteristics, plant growth, yield and abiotic stress tolerance

Treatment of agricultural biodegradable wastes and by-products can be carried out using composting or vermicomposting, or a combination of both treatment methods, to create a growing medium amendment suitable for horticultural use. When compared to traditional compost-maturation, vermicompost-maturation resulted in a more mature growing medium amendment i.e. lower C/N and pH, with increased nutrient content and improved plant growth response, increasing lettuce shoot fresh and dry weight by an average of 15% and 14%, respectively. Vermicomposted horse manure compost was used as a growing medium amendment for lettuce and was found to significantly increase lettuce shoot and root growth, and chlorophyll content. When used as a growing medium amendment for tomato fruit production, vermicomposted spent mushroom compost increased shoot growth and marketable yield, and reduced blossom end rot in two independent studies. Vermicompost addition to peat-based growing media increased marketable yield by an average of 21%. Vermicompost also improved tomato fruit quality parameters such as acidity and sweetness. Fruit sweetness, as measured using Brix value, was significantly increased in fruits grown with 10% or 20% vermicompost addition by 0.2 in truss one and 0.3 in truss two. Fruit acidity (% citric acid) was significantly increased in plants grown with vermicompost by an average of 0.65% in truss one and 0.68% in truss two. These changes in fruit chemical parameters resulted in a higher tomato fruit overall acceptability rating as determined by a consumer acceptance panel. When incorporated into soil, vermicomposted spent mushroom compost increased plant growth and reduced plant stress under conditions of cold stress, but not salinity or heat stress. The addition of 20% vermicompost to cold-stressed plants increased plant growth by an average of 30% and increased chlorophyll fluorescence by an average of 21%. Compared to peat-based growing medium, vermicompost had consistently higher nutrient content, pH, electrical conductivity and bulk density, and when added to a peat-based growing medium, vermicomposted spent mushroom compost altered the microbial community. Vermicompost amendment increased the microbial activity of the growing medium when incorporated initially, and this increased microbial activity was observed for up to four months after incorporation when plants were grown in it. Vermicomposting was shown to be a suitable treatment method for agricultural biodegradable wastes and by-products, with the resulting vermicompost having suitable physical, chemical and biological properties, and resulting in increased plant growth, marketable yield and yield quality, when used as an amendment in peat-based growing medium.

British economic growth 1270-1870

This is a definitive new account of Britain's economic evolution from a backwater of Europe in 1270 to the hub of the global economy in 1870. For the first time Britain's national accounts are reconstructed right back into the thirteenth century to show what really happened quantitatively during the centuries leading up to the Industrial Revolution. Contrary to traditional views of the earlier period as one of Malthusian stagnation, they reveal how the transition to modern economic growth built on the earlier foundations of a persistent upward trend in GDP per capita which doubled between 1270 and 1700. Featuring comprehensive estimates of population, land use, agricultural production, industrial and service-sector production and GDP per capita, as well as analysis of their implications, this is an essential reference work for those interest in British economic history and the origins of modern economic growth more generally.

National incomes and economic growth in pre-industrial Europe: insights from recent research

Pessimistic Malthusian verdicts on the capacity of pre-industrial European economies to sustain a degree of real economic growth under conditions of population growth are challenged using current reconstructions of urbanisation ratios, the real wage rates of building and agricultural labourers, and GDP per capita estimated by a range of methods. Economic growth is shown to have outpaced population growth and raised GDP per capita to in excess of $1,500 (1990 $ international at PPP) in Italy during its twelfth- and thirteenth-century commercial revolution, Holland during its fifteenth- and sixteenth-century golden age, and England during the seventeenth- and eighteenth-century runup to its industrial revolution. During each of these Smithian growth episodes expanding trade and commerce sustained significant output and employment growth in the manufacturing and service sectors. These positive developments were not necessarily reflected by trends in real wage rates for the latter were powerfully influenced by associated changes in relative factor prices and the per capita supply of labour as workers varied the length of the working year in order to consume either more leisure or more goods. The scale of the divergence between trends in real wage rates and GDP per capita nevertheless varied a great deal between countries for reasons which have yet to be adequately explained.

Culturing the African lungfish in Uganda: effects of exogenous fish feed on growth performance in tanks

The availability of African lungfish (Protopterus aethiopicus) in many communities in Uganda is declining. Indigenous efforts to culture this fish usually produce poor yields and depend on feeding fish fry, minced meat, and leftover food. This study evaluates three formulated diets (diet-1, diet-2, diet-3) fed to wild caught lungfish fingerlings reared in indoor tanks for 77 days. Experimental fish gradually accepted sinking pellets, and marginal increases in average body weight were observed. Mean (± SE) final weight (15.86 ± 0.80 g) for fish fed on diet-3 was significantly higher (p < 0.05) than fish fed diet-1 and diet-2. Specific growth rates (SGR) for diet- 3 were significantly higher (p < 0.05) than diet-1, and marginally more than diet-2 (0.37 ± 0.04 %/ d). Feed conversions were similar (p >0.05), ranging from 1.61 ± 0.26 to 2.07 ± 0.11. Survivals after an 11-week culture were relatively low (< 60%), but generally increased (R2 = 0.667, P = 0.007) with increasing dietary proteins. Diet-3 had a significant higher survival rate (p< 0.05) than diet-1 and diet-2. Significant growth performance was attained with diet-3. This study demonstrated that sinking fish feed pellets can be used to culture wild-caught African fingerlings in captivity.

Hyperspectral sensing to detect the impact of herbicide drift on cotton growth and yield

Yield loss in crops is often associated with plant disease or external factors such as environment, water supply and nutrient availability. Improper agricultural practices can also introduce risks into the equation. Herbicide drift can be a combination of improper practices and environmental conditions which can create a potential yield loss. As traditional assessment of plant damage is often imprecise and time consuming, the ability of remote and proximal sensing techniques to monitor various bio-chemical alterations in the plant may offer a faster, non-destructive and reliable approach to predict yield loss caused by herbicide drift. This paper examines the prediction capabilities of partial least squares regression (PLS-R) models for estimating yield. Models were constructed with hyperspectral data of a cotton crop sprayed with three simulated doses of the phenoxy herbicide 2,4-D at three different growth stages. Fibre quality, photosynthesis, conductance, and two main hormones, indole acetic acid (IAA) and abscisic acid (ABA) were also analysed. Except for fibre quality and ABA, Spearman correlations have shown that these variables were highly affected by the chemical. Four PLS-R models for predicting yield were developed according to four timings of data collection: 2, 7, 14 and 28 days after the exposure (DAE). As indicated by the model performance, the analysis revealed that 7 DAE was the best time for data collection purposes (RMSEP = 2.6 and R2 = 0.88), followed by 28 DAE (RMSEP = 3.2 and R2 = 0.84). In summary, the results of this study show that it is possible to accurately predict yield after a simulated herbicide drift of 2,4-D on a cotton crop, through the analysis of hyperspectral data, thereby providing a reliable, effective and non-destructive alternative based on the internal response of the cotton leaves.

Nutritional profile and yield of oyster mushroom cultivated on selected agricultural wastes

Research on mushroom production and products is gaining more grounds globally and in particular Nigeria. This study was carried out to determine nutritional relationship between the substrate used for cultivation and the fruiting body on each of the substrates. Agro-wastes, namely: palm ( Elaeis guineensis ) fruit shaft, plantain ( Musa paradisiaca ) leaves, sawdust and kenaf ( Hibiscus cannabinus ) stem, were assessed for suitability as substrates for cultivation of oyster mushroom ( Pleurotus floridanus Singer ). The spawn of the mushroom was used to inoculate each of the substrates, using a complete randomised design, with five replicates for each substrate. Results showed that all the substrates supported mycelia growth and development of fruiting bodies of the fungus. There were significant differences (P<0.05) among substrates in terms of number of days to complete mycelia run, with the least recorded in palm fruit shaft (25.20), and the highest in kenaf (32.40). Total yield also differed significantly (P<0.05), with the highest in palm fruit shaft (51.4 g 100 g-1) and lowest in plantain leaves (6.0 g 100 g-1). There was also significant difference (P<0.05) in the nutritional content of fruiting bodies, the highest fat content being on plantain leaves (1.72 g 100 g-1) and the lowest on palm fruit shaft (0.55 g 100 g-1). The trend was similar for mushroom substrates, plantain leaves having (2.55 g 100 g-1) and palm fruit shaft, (0.41g 100 g-1). Starch content for fruiting bodies was highest on sawdust (5.31 g 100 g-1) and lowest on kenaf (2.66 g 100 g-1), while for mushroom substrates, kenaf was (0.33g 100 g-1) and palm fruit shaft was (4.45g 100 g-1). There was a positive correlation (r = 0.24) between the nutrient of fruiting bodies and that of the substrate on which it was cultivated.

Effects of Environmental Factors on the Growth, Optical Density and Biomass of the Green Algae Chlorella Vulgaris in Outdoor Conditions

Effect of environmental factors on the growth of the Chlorella vulgaris was studied. C. vulgaris was cultivated in sterilized natural seawater enriched with F/2-Si medium. Then grow in bucket, tub and photobioreactor (PBR) in outdoor condition. The daily routine work consisted of culture checkups of optical density, biomass gains, atmosphere lux, culture lux, atmosphere temperature and culture temperature were recorded. The highest biomass yields were (3.0 μg/ml-1) in December and (2.01 μg/ml-1) in November in PBR. The highest deviation was in atmosphere lux in time 8:30 (± 117.7) and lowest deviation was in atmosphere temperature in time 15:00 (± 1.0499). Optical density (OD) indicated that the best growth of C. vulgaris in outdoor condition was obtained in 650 lux and also it increased with increasing amount of lux. Tub report of C. vulgaris showed different growing behaviors at the various concentration of light and at the different temperatures. Algal production in outdoor PBR is relatively inexpensive, but is only suitable for a few, fast-growing specie. Finally, this fact is noteworthy that in outdoor conditions, temperature and light have important role in growth of C. vulgaris in present study.

Effects of Organic and Inorganic Fertilizers on the Growth of NH-Ae 47-4 Variety of Okra

The paper evaluates the effects of organic and inorganic fertilizers on the growth of okra (variety NH-Ae 47-4. Organic fertilizers (cow dung and poultry droppings) and inorganic (NPK 15:15:15 and Urea 64:0) fertilizers were used for the experiment. The fertilizers were weighed and applied at 5g, 10g and 15g and were replicated three times and each having a control. Vegetative growth parameters taken include, shoot fresh weight (g), dry weight (g), plant height (cm), leaf number, stem girth (cm), leaf area (cm2). The results obtained from the experiment showed that the effect of the treatments were significantly difference from the control for all the parameters accessed with urea fertilizer having least effect. Plants treated with poultry litters have best performance by recording the highest fresh and dry weight (0.39g) at 4 weeks after planting (WAP); highest stem height 29.33cm for all the concentrations applied. Similarly, it has highest leaf area and stem girth (64.67cm2and 2.23cm respectively) at 8WAP.

A new plant growth system rig based on thermodynamic solar energy: a study for energy efficiency assessment

At the present there is a high pressure toward the improvement of all production processes. Those improvements can target distinct factors along the production chain. In particular, and due to recent tight energy efficiency policies, those that involve energy efficiency. As can be expected, agricultural processes are not immune to this tendency. Even more when dealing with indoor productions. In this context, this work presents an innovative system that aims to improve the energy efficiency of a trees growing platform. This improvement in energy consumption is accomplished by replacing an electric heating system by one based on thermodynamic panels. The assessment of the heating fluid caudal and its temperature was experimentally obtained by means of a custom made scaled prototype whose actuators status are commanded by a Fuzzy-based controller. The obtained results suggest that the change in the heating paradigm will lead to overall savings that can easily reach 60% on the energy bill.