Crystal structure of the (Mg,Fe)[UO2(P,As)O-4](2) center dot 10H(2)O solid solution - A novel mineral variety of saleeite

The crystal structure of a novel variety {[(Mg0.81Fe0.19)(H2O)(6)](H2O)(4)}{(UO2)[(P0.67As0.33)O-4]}(2) of the mineral saleeite is determined using X-ray diffraction (Bruker Smart diffractometer, lambda MoK alpha, graphite monochromator, 2 theta(max) = 56.62 degrees, R = 0.0321 for 2317 reflections, T = 100 K). The main crystal data are as follows: a = 6.952(6) angstrom, b = 19.865(5) , angstrom, c = 6.969(2) angstrom, beta = 90.806(4)degrees, space group P12(l)/n1, Z = 2, and P-calcd = 3.34 g/cm(3). It is shown that the structure is formed by alternating (along the [010] direction) anionic layers, which are composed of uranium bipyramids and T(P,As) tetrahedra, and cation layers consisting of M(Mg, Fe) octahedra and water molecules, which are joined through a system of asymmetric hydrogen bonds. The hydrogen atoms are located, the scheme of hydrogen bonds is established, and their geometric characteristics are calculated.

Effect of mechanical coating with Ni and Ni-5% Al on the structure and electrochemical properties of the Mg-50% Ni alloy

The Mg-Ni metastable alloys (with amorphous or nanocrystalline structures) are promising candidates for anode application in nickel-metal hydride rechargeable batteries due to its large hydrogen absorbing capacity, low weight, availability, and relative low price. In spite of these interesting features, improvement on the cycle life performance must be achieved to allow its application in commercial products. In the present paper, the effect of mechanical coating of a Mg-50 at.% Ni alloy with Ni and Ni-5 at.% Al on the structure, powder morphology, and electrochemical properties is investigated. The coating additives, Mg-Ni alloy and resulting nanocomposites (i.e., Mg-Ni alloy + additive) were investigated by means of X-ray diffraction and scanning electron microscopy. The Mg-Ni alloy and nanocomposites were submitted to galvanostatic cycles of charge and discharge to evaluate their electrode performances. The mechanical coating with Ni and Ni-5% Al increased the maximum discharge capacity of the Mg-Ni alloy from of 221 to 257 and 273 mA h g(-1), respectively. Improvement on the cycle life performance was also achieved by mechanical coating.

LEARNING STUDY: ROZVOJ ��KOLY SKRZE KOLEGI��LN�� U��EN�� U��ITEL�� : Learning study: school development through collegial learning of teachers

The aim of this article is to describe how the Learning Study method (LS) was implemented in a Swedish upper secondary school, as well as how the principals and the teachers involved perceived this to affect teaching at, and the development of, the school. It is an empirical study that was conducted as an action research project over a period of three years. The project to implement the LS method was based on the assumption that proper training is the result of collegial activity that occurs when teachers learn from each other. The teachers in this study were, in general, positive about using the LS method. It created opportunities to meet and talk about teaching skills, developed better professional relationships between colleagues, and offered a systematic method for planning, implementing and monitoring teaching. However, working together requires that time be set aside to allow for implementation of the LS method. This is crucial, as the LS method is a rather expensive way to make school development work. This places heavy demands on principals to create the necessary conditions for the implementation of the LS method.

Learning Grammar : A study of upper secondary level students��� attitudes and beliefs concerning the learning of grammar

The communicative approach to language learning is widely taught in Western education, and yet its predecessor, the grammar-translation method, is still commonly employed in other parts of the world. In Sweden, the increasing popularity of the communicative approach is often justified by the high level of students��� communicative skills (��hman, 2013). At the same time, students��� written texts and speech contain many grammatical errors (��hman, 2013). Consequently, being aware of their tendency to produce grammatical errors, some students express beliefs regarding both the explicit and implicit learning of grammar (Sawir, 2005; Boroujeni, 2012). The objective of this thesis is to gain more knowledge regarding students��� beliefs concerning the learning of English grammar at the upper secondary level, in Sweden. With this purpose a survey was conducted in two schools in Sweden, where 49 upper-secondary English students participated. Qualitative and quantitative methods were applied to process the collected data. Despite some difference in the participants��� ages, there were many similarities in their attitudes towards the teaching and learning of grammar. The results show that the participants in both schools believe that only by applying both, explicit and implicit methods, can they obtain a high level of language proficiency. The results of this study can help teachers in planning different activities that enhance the students��� knowledge of grammar.

Optimal taxation with gradual learning of types

An important feature of life-cycle models is the presence of uncertainty regarding one���s labor income. Yet this issue, long recognized in different areas, has not received enough attention in the optimal taxation literature. This paper is an attempt to fill this gap. We write a simple 3 period model where agents gradually learn their productivities. In a framework akin to Mirrlees��� (1971) static one, we derive properties of optimal tax schedules and show that: i) if preferences are (weakly) separable, uniform taxation of goods is optimal, ii) if they are (strongly) separable capital income is to rate than others forms of investiment.

A case study approach to classroom experiential learning of problem structuring methods

The proposed research aims at consolidating two years of practical experience in developing a classroom experiential learning pedagogic approach for the problem structuring methods (PSMs) of operational research. The results will be prepared as papers to be submitted, respectively, to the Brazilian ISSS-sponsored system theory conference in S��o Paulo, and to JORS. These two papers follow the submission (in 2004) of one related paper to JORS which is about to be resubmitted following certain revisions. This first paper draws from the PSM and experiential learning literatures in order to introduce a basic foundation upon which a pedagogic framework for experiential learning of PSMs may be built. It forms, in other words, an integral part of my research in this area. By September, the area of pedagogic approaches to PSM learning will have received its first official attention - at the UK OR Society conference. My research and paper production during July-December, therefore, coincide with an important time in this area, enabling me to form part of the small cohort of published researchers creating the foundations upon which future pedagogic research will build. On the institutional level, such pioneering work also raises the national and international profile of FGVEAESP, making it a reference for future researchers in this area.

Effect of precursor solution on the formation of perovskite phase of Pb(Mg-1/Nb-3(2/3))O-3 thin films

Precursor solutions for Pb(Mg1/3Nb2/3)O-3 (PMN) synthesis were obtained by Pechini's method. The influence of the concentration of organic materials on the phase formation has been studied. For this purpose, PMN solutions were prepared with different precursors and were characterized by thermogravimetric and differential thermal analysis. The obtained solutions were deposited onto a Si (100) substrate by dip coating and pre-treated in a hot plate at 300 degreesC for 1 h. The films were annealed at 600, 700, 800 and 900 degreesC for 1 h and characterized by X-ray diffraction. The perovskite phase was formed after annealing at 600 and 700 degreesC when the solution of PMN was prepared with a lower amount of organic material and starting with mobium oxide. By increasing the temperature to 800 or 900 degreesC, only the formation of pyrochlore phase was observed. With the solution prepared from mobium ethoxide, only the presence of pyrochlore phase was observed independently of the annealing temperature. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Fast sequential multi-element determination of Ca, Mg, K, Cu, Fe, Mn and Zn for foliar diagnosis using high-resolution continuum source flame atomic absorption spectrometry: Feasibility of secondary lines, side pixel registration and least-squares background correction

The fast sequential multi-element determination of Ca, Mg, K, Cu, Fe, Mn and Zn in plant tissues by high-resolution continuum source flame atomic absorption spectrometry is proposed. For this, the main lines for Cu (324.754 nm), Fe (248.327 nm), Mn (279.482 nm) and Zn (213.857 nm) were selected, and the secondary lines for Ca (239.856 nm), Mg (202.582 nm) and K (404.414 nm) were evaluated. The side pixel registration approach was studied to reduce sensitivity and extend the linear working range for Mg by measuring at wings (202.576 nm; 202.577 nm; 202.578 nm; 202.580 nm: 202.585 nm; 202.586 nm: 202.587 nm; 202.588 nm) of the secondary line. The interference caused by NO bands on Zn at 213.857 nm was removed using the least-squares background correction. Using the main lines for Cu, Fe, Mn and Zn, secondary lines for Ca and K, and line wing at 202.588 nm for Mg, and 5 mL min(-1) sample flow-rate, calibration curves in the 0.1-0.5 mg L-1 Cu, 0.5-4.0 mg L-1 Fe, 0.5-4.0 mg L-1 Mn, 0.2-1.0 mg L-1 Zn, 10.0-100.0 mg L-1 Ca, 5.0-40.0 mg L-1 Mg and 50.0-250.0 mg L-1 K ranges were consistently obtained. Accuracy and precision were evaluated after analysis of five plant standard reference materials. Results were in agreement at a 95% confidence level (paired t-test) with certified values. The proposed method was applied to digests of sugar-cane leaves and results were close to those obtained by line-source flame atomic absorption spectrometry. Recoveries of Ca, Mg, K, Cu, Fe, Mn and Zn in the 89-103%, 84-107%, 87-103%, 85-105%, 92-106%, 91-114%, 96-114% intervals, respectively, were obtained. The limits of detection were 0.6 mg L-1 Ca, 0.4 mg L-1 Mg, 0.4 mg L-1 K, 7.7 mu g L-1 Cu, 7.7 mu g L-1 Fe, 1.5 mu g L-1 Mn and 5.9 mu g L-1 Zn. (C) 2009 Elsevier B.V. All rights reserved.

Swarming of millipedes, a new case noticed in the District of Patrocinio-MG-Brazil

A population boom of the millipede Plusioporus setigerhas been recorded in coffee crops in the district of Patrocinio-MG, Brazil on the last five years. The millipedes spread over dwelling houses and to vegetable gardens, orchards and small plantations. It was suggested that population increase occurred as a consequence of the organic materials in high scale and also periodic irrigation in the coffee crop.

Direct and simultaneous determination of As, Cu, and Pb in Brazilian sugar cane spirits by graphite furnace AAS using Tungsten permanent modifier with Co-injection of Pd/Mg(NO3)(2)

A method was developed using the multi-element graphite furnace atomic absorption spectrometry technique for the direct and simultaneous determination of As, Cu, and Pb in Brazilian sugar cane spirit (cachaqa) samples. Also employed was the end-capped transversely heated graphite atomizer (THGA) with platforms pre-treated with W permanent modifier and co-injection of Pd/Mg(NO3)(2). Pyrolysis and atomization temperature curves were established in a cachaqa medium (1+1; v/v) containing 0.2% (v/v) HNO3 and spiked with 20 mu g L-1 As and Pb and 200 mu g L-1 Cu. The effect of the concentration of major elements usually present in cachaqa matrices (Ca, Mg, Na, and K) and ethanol on the absorbance of As, Cu, and Pb was investigated. Analytical working solutions of As, Cu, and Pb were prepared in 10% (v/v) ethanol plus 5.0 mg L-1 Ca, Mg, Na, and K. Acidified to 0.2% (v/v) HNO3, these solutions were suitable to build calibration curves by matrix matching. The proposed method was applied to the simultaneous determination of As, Cu, and Pb in commercial sugar cane spirits. The characteristic mass for the simultaneous determination was 16 pg As, 119 pg Cu, and 28 pg Pb. The pretreated tube lifetime was about 450 firings. The limit of detection (LOD) was 0.6 mu g L-1 As, 9.2 mu g L-1 Cu, and 0.3 pig L-1 Pb. The found concentrations varied from 0.81 to 4.28 mu g L-1 As, 0.28 to 3.82 mg L-1 Cu and 0.82 to 518 mu g L-1 Pb. The recoveries of the spiked samples varied from 94-112% (As), 97-111% (Cu), and 95-101% (Pb). The relative standard deviation (n=12) was 6.9%, 7.4%, and 7.7% for As, Cu, and Pb, respectively, present in a sample at 0.87 mu g L-1, 0.81 mg L-1, and 38.9 mu g L-1 concentrations.

Evaluation of Bi as internal standard to minimize matrix effects on the direct determination of Pb in vinegar by graphite furnace atomic absorption spectrometry using Ru permanent modifier with co-injection of Pd/Mg(NO3)(2)

Bismuth was evaluated as an internal standard for the direct determination of Pb in vinegar by graphite furnace atomic absorption spectrometry using Ru as a permanent modifier with co-injection of Pd/Mg(NO3)(2). The correlation coefficient of the graph plotted from the non-nalized absorbance signals of Bi versus Pb was r=0.989. Matrix effects were evaluated by analyzing the slope ratios between the analytical curve, and analytical curves obtained from Pb additions in red and white wine vinegar obtained from reference solutions prepared in 0.2% (v/v) HNO3, samples. The calculated ratios were around 1.04 and 1.02 for analytical curves established applying an internal standard and 1.3 and 1.5 for analvtical curves without. Analytical curves in the 2.5-15 pg L-1 Pb concentration interval were established using the ratio Pb absorbance to Bi absorbance versus analvte concentration, and typical linear correlations of r=0.999 were obtained. The proposed method was applied for direct determination of Pb in 18 commercial vinegar samples and the Pb concentration varied from 2.6 to 31 pg L-1. Results were in agreement at a 95% confidence level (paired t-test) with those obtained for digested samples. Recoveries of Pb added to vinegars varied from 96 to 108% with and from 72 to 86% without an internal standard. Two water standard reference materials diluted in vinegar sample were also analyzed and results were in agreement with certified values at a 95% confidence level. The characteristic mass was 40 pg Pb and the useful lifetime of the tube was around 1600 firings. The limit of detection was 0.3 mu g L-1 and the relative standard deviation was <= 3.8% and <= 8.3% (n = 12) for a sample containing, 10 mu L-1 Pb with and without internal standard, respectively. (C) 2007 Elsevier B.V. All rights reserved.

Determination of Ca, Mg, and Zn in biodiesel microemulsions by FAAS using discrete nebulization

Funda����o de Amparo �� Pesquisa do Estado de S��o Paulo (FAPESP)

Direct and simultaneous determination of As, Cu, and Pb in Brazilian sugar cane spirits by graphite furnace AAS using tungsten permanent modifier with co-injection of Pd/Mg(N03)2

A method was developed using the multi-element graphite furnace atomic absorption spectrometry technique for the direct and simultaneous determination of As, Cu, and Pb in Brazilian sugar cane spirit (cacha��a) samples. Also employed was the end-capped transversely heated graphite atomizer (THGA) with platforms pre-treated with W permanent modifier and co-injection of Pd/Mg(N03)2. Pyrolysis and atomization temperature curves were established in a cacha��a medium (1+1; v/v) containing 0.2% (v/v) HN03 and spiked with 20 ��g L-1 As and Pb and 200 ��g L-1Cu. The effect of the concentration of major elements usually present in cacha��a matrices (Ca, Mg, Na, and K) and ethanol on the absorbance of As, Cu, and Pb was investigated. Analytical working solutions of As, Cu, and Pb were prepared in 10% (v/v) ethanol plus 5.0 mg L-1 Ca, Mg, Na, and K. Acidified to 0.2% (v/v) HNO3, these solutions were suitable to build calibration curves by matrix matching. The proposed method was applied to the simultaneous determination of As, Cu, and Pb in commercial sugar cane spirits. The characteristic mass for the simultaneous determination was 16 pg As, 119 pg Cu, and 28 pg Pb. The pretreated tube lifetime was about 450 firings. The limit of detection (LOD) was 0.6 ��g L-1As, 9.2 ��g L-1 Cu, and 0.3 ��g L-1Pb. The found concentrations varied from 0.81 to 4.28 ��g L-1As, 0.28 to 382 mg L-1 Cu and 0.82 to 518 ��g L-1 Pb. The recoveries of the spiked samples varied from 94-112% (As), 97-111% (Cu), and 95-101% (Pb). The relative standard deviation (n=12) was 6.9%, 7.4%, and 7.7% for As, Cu, and Pb, respectively, present in a sample at 0.87 ��gL-1, 0.81 mgL-1, and 38.9 ��gL-1concentrations.

Los comerciantes de productos agr��colas de San Vicente y las Granadinas, Granada, Dominica y Santa Luc��a = The agricultural traders of St. Vincent and the Grenadines, Grenada, Dominica and St. Lucia

Incluye Bibliograf��a