Exéresis de las lesiones hiperplásicas de la cavidad bucal. Estudio retrospectivo de 128 casos

Objetivos: Este trabajo pretende, en base a nuestra experiencia, valorar y discutir las indicaciones, ventajas e inconvenientes de la exéresis de los épulis de la cavidad bucal con el láser de dióxido de carbono (CO2) respecto al láser de Erbio:YAG (Er:YAG), el láser de diodo y el bisturí frío. Material y método: Se ha realizado un estudio retrospectivo de un grupo de 120 pacientes en los que se extirparon 128 épulis con el láser de CO2, láser de Er:YAG, láser de diodo y bisturí frío. Se realizaron controles postoperatorios a los 7, 15 y 30 días para comprobar la cicatrización y la evolución de la herida y a los 3, 6 y 12 meses verificando si se había producido o no la recidiva de la lesión. Resultados: Según las características clínicas y etiopatogénicas de las lesiones extirpadas, se han formado dos grupos: las lesiones hiperplásicas gingivales (77 casos) y los épulis fisurados (51 casos). La localización más frecuente de las hiperplasias gingivales fue la mandíbula (51.9%). Se encontró que la hiperplasia fibrosa fue el diagnóstico histopatológico más frecuente con 49 casos (63.6%). El porcentaje de recidiva tras su extirpación fue del 9,1%, de los cuales 5 casos eran hiperplasias fibrosas. Sólo hubo un caso de lesión maligna que fue diagnosticada de carcinoma de células escamosas infiltrante. Por otro lado, de los 51 épulis fisurados tratados, el 58.8% se encontraban en el maxilar superior. Éstos fueron diagnosticados histológicamente como hiperplasias fibrosas, recidivando en el 19.6% de los casos. Conclusiones: Aunque las diferentes técnicas quirúrgicas utilizadas en la extirpación del épulis de la cavidad bucal son correctas, en nuestra opinión, el láser de CO2 es el tratamiento de elección, ya que ofrece ventajas tanto intra como postoperatorias. Por otro lado, es indispensable analizar histopatológicamente toda lesión de la cavidad bucal para establecer un diagnóstico de certeza

Cirugía Bucal Ambulatoria en pacientes pediátricos. Casuística del año 2000 en la Clínica Odontológica de la Universidad de Barcelona

Objetivos: Este trabajo pretende demostrar que se pueden realizar la mayoría de las intervenciones quirúrgicas de la cavidad bucal en la población pediátrica en un medio ambulatorio, así como valorar y mostrar la actividad realizada en el Máster de Cirugía e Implantología Bucal de la Facultad de Odontología de la Universidad de Barcelona durante el año 2000. Diseño del estudio: Para la realización de este trabajo se ha contabilizado la actividad quirúrgica de las unidades de cirugía bucal y cirugía con láser en la población pediátrica en el Máster de Cirugía e Implantología Bucal de la Universidad de Barcelona. Resultados: De las 3187 intervenciones quirúrgicas realizadas en nuestro servicio, 489 fueron en pacientes menores de 18 años. La exodoncia quirúrgica de terceros molares inferiores fue la más frecuente (55'6%), seguida de otras extracciones dentarias (33'6%), quirúrgicas o no, y del resto de intervenciones (10'6%) que incluyeron: fenestraciones de caninos u otros dientes incluidos, exéresis de frenillos, de mucoceles y reubicaciones dentarias. Se presentaron complicaciones tras la extracción quirúrgica de los terceros molares en un 15'93% de los casos, siendo las más frecuentes el dolor (4'35%) y la tumefacción (4'35%), signos propios de la inflamación postoperatoria. Conclusiones: Nuestra experiencia muestra que la cirugía bucal ambulatoria puede practicarse de forma segura en la población pediátrica siempre y cuando se disponga de los medios y del personal sanitario adecuados

Caracterização de cimento odontológico obtido a partir de um vidro preparado pelo método dos precursores poliméricos

Glass ionomer cements are glass and polymer composite materials. These materials currently find use in dentistry. The purpose of this work is to obtain glass powders based on the composition 4.5SiO2 - 3Al2O3 - 2CaO to be used in dentistry. The powders were prepared by a chemical route at 700 0C. The properties of glass ionomer cements obtained from powders prepared at 700 ºC were studied. Diametral tensile strength and microhardness were evaluated for the experimental glass ionomer cements and a commercial material. It was concluded that the properties of experimental cements were similar to those of the commercial ones.

The Influence of Certain Processing Factors on the Durability of Yttrium Stabilized Zirconia Used As Dental Biomaterial

In dentistry, yttrium partially stabilized zirconia (ZrO2) has become one of the most attractive ceramic materials for prosthetic applications. The aim of this series of studies was to evaluate whether certain treatments used in the manufacturing process, such as sintering time, color shading or heat treatment of zirconia affect the material properties. Another aim was to evaluate the load-bearing capacity and marginal fit of manually copy-milled custom-made versus prefabricated commercially available zirconia implant abutments. Mechanical properties such as flexural strength and surface microhardness were determined for green-stage milled and sintered yttrium partially stabilized zirconia after different sintering time, coloring process and heat treatments. Scanning electron microscope (SEM) was used for analyzing the possible changes in surface structure of zirconia material after reduced sintering time, coloring and heat treatments. Possible phase change from the tetragonal to the monoclinic phase was evaluated by X-ray diffraction analysis (XRD). The load-bearing capacity of different implant abutments was measured and the fit between abutment and implant replica was examined with SEM. The results of these studies showed that the shorter sintering time or the thermocycling did not affect the strength or surface microhardness of zirconia. Coloring of zirconia decreased strength compared to un-colored control zirconia, and some of the colored zirconia specimens also showed a decrease in surface microhardness. Coloring also affected the dimensions of zirconia. Significantly decreased shrinkage was found for colored zirconia specimens during sintering. Heat treatment of zirconia did not seem to affect materials’ mechanical properties but when a thin coating of wash and glaze porcelain was fired on the tensile side of the disc the flexural strength decreased significantly. Furthermore, it was found that thermocycling increased the monoclinic phase on the surface of the zirconia. Color shading or heat treatment did not seem to affect phase transformation but small monoclinic peaks were detected on the surface of the heat treated specimens with a thin coating of wash and glaze porcelain on the opposite side. Custom-made zirconia abutments showed comparable load-bearing capacity to the prefabricated commercially available zirconia abutments. However, the fit of the custom-made abutments was less satisfactory than that of the commercially available abutments. These studies suggest that zirconia is a durable material and other treatments than color shading used in the manufacturing process of zirconia bulk material does not affect the material’s strength. The decrease in strength and dimensional changes after color shading needs to be taken into account when fabricating zirconia substructures for fixed dental prostheses. Manually copy-milled custom-made abutments have acceptable load-bearing capacity but the marginal accuracy has to be evaluated carefully.

Riesgo de accidentes biológicos en estudiantes de la salud: revisión de la literatura en los últimos 14 años.

Introducción: Todos los trabajadores del área de la salud están en riesgo de padecer un accidente biológico. No obstante los estudiantes de estas aéreas, pueden presentar más riesgo porque apenas están en formación y no tienen la práctica o experiencia suficiente. Existen varios artículos que han estudiado la incidencia y prevalencia de accidentes biológicos en los trabajadores del área de la salud, Sin embargo, sobre esta problemática de la población estudiantil del área de la salud, se encuentra menos literatura. Por lo tanto con esta revisión sistemática se busca analizar y actualizar este tema. Métodos: Se realizó una revisión de la literatura científica de artículos publicados en los últimos 14 años, en relación con la prevalencia de accidentes biológicos en estudiantes de medicina, odontología, enfermería y residentes del área de la salud a nivel mundial. Se llevó a cabo la búsqueda en la base de datos de Pubmed, encontrando un total de 100 artículos, escritos en inglés, francés, español o portugués. Resultados: Las prevalencias encontradas sobre accidentes biológicos en estudiantes fueron las siguientes: en países europeos a nivel de enfermería los valores oscilan entre 10.2 % a 32%, en medicina fueron del 16%-58.8%, y en odontología del 21 %. En países asiáticos, se encontró que en enfermería el porcentaje varía de 49%-96 %, en medicina van del 35% -68%, y en odontología varia de 68.a 75.4%. En Norte América, en medicina las cifras fluctúan alrededor del 11-72.7 % y en odontología giran alrededor del 19.1%. Finalmente respecto a Suramérica la prevalencia fue de 31.2 a 46.7% en medicina, y del 40% en enfermería. Conclusiones: Por lo anterior se pudo concluir que, la prevalencia de accidentes biológicos en los estudiantes del área de la salud es elevada y varía según el continente en el que se encuentren.

Eugenol modifies the excitability of rat sciatic nerve and superior cervical ganglion neurons

Eugenol is a phenylpropene obtained from the essential oils of plants such as clove and basil which has ample use in dentistry. Eugenol possesses analgesic effects that may be related to the inhibition of voltage-dependent Na(+) channels and/or to the activation of TRPV1 receptors or both. In the present study, electrophysiological parameters were taken from the compound action potentials of the isolated rat sciatic nerve and from neurons of the superior cervical ganglion (SCG) impaled with sharp microelectrodes under current-clamp conditions. In the isolated rat sciatic nerve, eugenol inhibited the compound action potential in a concentration-dependent manner. Action potentials recorded from SCG neurons were inhibited by eugenol with an IC(50) of 0.31 mM. At high concentrations (2 mM), during brief applications. eugenol caused significant action potential blockade while it did not interfere with the resting membrane potential or the membrane input resistance. Surprisingly, however, at low eugenol concentrations (0.6 mM), during long time applications, a reversible reduction (by about 50%) in the input membrane resistance was observed, suggesting the possible involvement of a secondary delayed effect of eugenol to reduce neuronal excitability. (C) 2010 Elsevier Ireland Ltd. All rights reserved.

Estudo da zircônia reforçado com alumina

Ceramics materials have good properties including chemical stability, high hardness and wear resistance. Moreover, due to its fragility, can suffer failure under relatively low levels of tension. Actually zirconia is the material of choice in metal free dental prostheses used in dentistry due its inertia in physiological environment, good bending strength, hardness and fracture toughness. The alumina and mixed tungsten and titanium carbides additions, acting as reinforcement elements in the zirconia matrix, have as their main objective the improvement of mechanical properties of this material. In this work, samples of zirconia, zirconia with 30% wt of alumina and zirconia with 30% wt mixed carbides were analyzed. The samples were sintered by uniaxial hot pressing on 30 MPa pressure, for 1 hour in an argon atmosphere. They were physically characterized by porosity and density measurements, and mechanically by 3-points bending strength and Vickers microhardness. The X-ray diffraction was used for the phase identifications and microstructure was examined by scanning electron microscopy (SEM). The addition of mixed carbides as reinforcement elements in zirconia matrix provides improvements in all properties analyzed in this work. The alumina addition has dropped the zirconia strength, although it caused improvement in other properties

Efeito das variáveis laboratoriais protéticas na adesão da porcelana com ligas de níquel-cromo

The metalceramic crowns are usually used in dentistry because they provide a resistant structure due to its metallic base and its aesthetics from the porcelain that recovers this structure. To manufacture these crowns, a series of stages should be accomplished in the prosthetic laboratories, and many variables can influence its success. Changes in these variables cause alterations in the metallic alloy and in the porcelain, so, as consequence, in the adhesion between them. The composition of the metal alloy can be modified by recasting alloys, a common practice in some prosthetic laboratories. The aim of this paper is to make a systematic study investigating metalceramic crowns as well as analyzing the effect of recasting Ni-Cr alloys. Another variable which can influence the mechanism of metalceramic union is the temperature used in firing porcelain procedure. Each porcelain has to be fired in a fixed temperature which is determined by the manufacturer and its change can cause serious damages. This research simulate situations that may occur on laboratory procedures and observe their consequences in the quality of the metalceramic union. A scanning eletron microscopy and an optic microscopy were accomplish to analyse the metal-ceramic interface. No differences have been found when remelting alloys were used. The microhardness were similar in Ni-Cr alloys casted once, twice and three times. A wettability test was accomplished using a software developed at the Laboratório de Processamento de Materiais por Plasma, on the Universidade Federal do Rio Grande do Norte. No differences were found in the contact angle between the solid surface (metallic substratum) and the tangencial plane to the liquid surface (opaque). To analyse if the temperature of porcelain firing procedure could influence the contact area between metal and porcelain, a variation in its final temperature was achieve from 980° to 955°C. Once more, no differences have been found

Pesquisa odontológica no Brasil: características da produção científica no início do século XXI

Dentistry, as a science and field of knowledge, has presented a substantial development in the last decades in the areas of research and education. The aim of this study was to evaluate the Brazilian scientific production in Dentistry, as from their methodological outlining, which characterizes the XXI Century. Five thousand two hundred and three study abstracts were evaluated, comprising works presented in the meetings of the Brazilian Society of Dentistry Research (SBPqO), during the period of 2001 to 2006. The main results identify that, as for the methodology used in the researches, there was a predominance of the studies of an individuate, interventionist and longitudinal nature; of the researches in the areas of Dentistry, Periodontology, Endodontics, Pedodontics and Collective Oral Health and experimental studies about clinical researches or with collective subjects. The inter and multidisciplinarity are pointed out in the outlining of this study, as the triad Education-Health-Research is discussed, so that they transcend in their fields of action, in the direction of the transdisciplinarity. It is concluded that, in the studied period, there was a reasonable and balanced production in Brazilian dental field

Stability and Local Toxicity Evaluation of a Liposomal Prilocaine Formulation

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A (bio)ética e a Odontologia: os (des)caminhos de uma formação humana

The present research carried out from three national dentistry magazines published in the period between 1990 and 2004, has as a goal to analyze how bioethics has been approached in this area, not only identifying the main concerns and tendencies, but also aiming to learn how this knowledge is produced and divulged in the dentistry circuit. We have articulated a quantitative-qualitative approach, studying 2995 articles. The articles were selected and assorted in twenty thematic categories, through their titles and key words. The analysis of the empiric material shows that, although there is a growth tendency of this discussion, little has been published about this theme (1,9%). Besides, it seems that there is an arrhythmia between the present bioethic approach in dentistry and the present life demands, where the deontology and legalist focuses are predominant, seeming to correspond to the inner aspects of the profession alone. In spite of this, through the qualitative approach it was possible to identify ways to build a more complex and integral odontological formation and practice. Within the conclusions, we still point out, that, this investigation, even face to its limitations, seems to offer subsidies for reflection and further studies about the theme, working as a parameter to keep up with the evolution of the bioethic thinking in the Odontology

Comportamento de adesão da madeira de um híbrido clonal de Eucalyptus urophylla x Eucalyptus grandis proveniente de três condições de manejo

This study aimed to evaluate the adhesion ability of eucalyptus lumber from three tillage systems, using adhesives: resorcinol formaldehyde and two adhesives in water emulsion based on vinyl poly-acetate. The management systems were characterized by three strata, the stratum one (E1) characterized by wood from coppice and 70 months of age, the stratum two (E2) characterized by wood and retirement age of 166 months and stratum three (E3), also characterized by retirement at 70 months of age. The wood was derived from a random mixture of the first two sawn logs, each three feet from the base, which comprised three treatments on the adhesive used. We evaluated the shear strength by compression tests and the percentage of wood failure in the glue line. Based on the results obtained, it can be said that the adhesion had satisfactory performance with all the resins used, and the average values of shear strength of the glue line were shown to be equivalent to the shear strength of solid wood only for the samples which adhered with 'Wonderbond' adhesive and also provide higher values for wood failure (97.64%). The highest density present in the wood of the second stratum (E2) influenced only sticking with the resorcinol formaldehyde resin. For polyvinyl acetate (Cascorez 2590), shear values decreased in the third management condition (E3).

Analytical Methods for the Determination of Chlorhexidine: A Review

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fatores associados à condição de saúde bucal de pacientes internados em hospitais públicos do município de Natal-RN

The hospitalization is an event that can attack any person, independent of gender, race, social and economical condition. Last year, the prevalence of hospitalization was 8.1 for 100 inhabitants and the average time of hospitalization was 8.5 days for each patient one in Natal city. Therefore, an important point is whether the attention to the patients during the permanence in these health establishments incorporates the health integral model suggested by the principles proposed by the National Health System in Brazil (SUS), with actions of promotion and protection by different kinds of professionals, beside those called convalescence. Then, the aim of this study was to evaluate the patient s oral health conditions hosted in public hospitals of the Natal city, looking for to establish its relationship with several risk factors by two dimensions: the characteristics of the hospitalization and the patient s general and economical conditions. We accomplished a cross-sectional study with 205 patients distributed among the hospitals Onofre Lopes, Giselda Trigueiro and Monsenhor Walfredo Gurgel, looking for to know the socio-demographic characteristics, the food habits and of oral hygiene and the conditions of oral health, through the Visible Plaque Index and Gingival Bleeding Index. We observed that the conditions of the patient s oral health interned at public hospitals of reference of the municipal district of Natal is bad, existing accumulation of dental plaque and, consequently, a great number of patients with gingival bleeding. However, the time of hospitalization and its reason, the type of medicine used in this time and the toothbrush frequency were not configured as risk factors for this oral health condition

Projetos políticos pedagógicos dos cursos de Odontologia do RN : formação profissional e a perspectiva da atenção à terceira idade

Brazil has been undergoing major demographic change.According to IBGE, the next 20 years the country's elderly population may reach over 30 million people. This tariff provides specifics regarding the process of health / disease. It is essential that higher education institutions are committed to this demand in view of the integrated training of health needs of society. The aim of this study is to analyze the Pedagogical Political Projects (PPP) of courses in dentistry in Rio Grande do Norte (RN), according to the national curriculum guidelines (DCNS) and training from the perspective of health care for the elderly. This is an exploratory study with a qualitative approach: with records and interviews. The study subjects were an Assistant Professor in the development of PPPs for each institution. The scenario in this study were dental training institutions in the newborns. Initially, the analysis of the PPP was by using the Alceste 4.9 software. The interpretation of the contents of interviews with teachers was done through content analysis of Bardin (2010). The PPPs are based on the DCNS, meet the characteristics of regional and seek a generalist, but still strongly directed to technical and scientific aspects of professional practice. Efforts and institutional approaches, involving teachers and students of the courses are being mobilized for training with more articulated network of health services. However, the emphasis on content pertaining to the health care of the elderly, is still limited when compared to those targeted content inherent in children and adolescents in all three curricular structures. It is reasonable to conclude that the historical, political, scientific, cultural and social, present in society, influence the formation of the dental professional RN. The greater participation of society in the process of vocational training in dentistry is needed. This can be done from the involvement of universities with health councils, bodies representing the dental profession and other segments of civil society in order to induce changes that generate ideas and educational practices integrative and interdisciplinary, with emphasis on continuing education for teachers, servants, employees and students. Containing conduct this process inherent flexibility of curriculum, teaching-service integration and coordination abilities and professional skills that are essential to understanding the human being and its complexities