Microfluidic fabrication of advanced microcapsules for use in self-healing materials

The proposed work aims to facilitate the development of a microfluidic platform for the production of advanced microcapsules containing active agents which can be the functional constituents of self-healing composites. The creation of such microcapsules is enabled by the unique flow characteristics within microchannels including precise control over shear and interfacial forces for droplet creation and manipulation as well as the ability to form a solid shell either chemically or via the addition of thermal or irradiative energy. Microchannel design and a study of the fluid dynamics and mechanisms for shell creation are undertaken in order to establish a fabrication approach capable of producing healing-agent-containing microcapsules. An in-depth study of the process parameters has been undertaken in order to elucidate the advantages of this production technique including precise control of size (i.e., monodispersity) and surface morphology of the microcapsules. This project also aims to aid the optimization of the mechanical properties as well as healing performance of self-healing composites by studying the effects of the advantageous properties of the as-produced microcapsules. Scale-up of the microfluidic fabrication using parallel devices on a single chip as well as on-chip microcapsule production and shape control will also be investigated. It will be demonstrated that microfluidic fabrication is a versatile approach for the efficient creation of functional microcapsules allowing for superior design of self-healing composites.

Bluetooth Enabled Ad-hoc Networks: Performance Evaluation of a Self-healing Scatternet Formation Protocol

Bluetooth wireless technology is a robust short-range communications system designed for low power (10 meter range) and low cost. It operates in the 2.4 GHz Industrial Scientific Medical (ISM) band and it employs two techniques for minimizing interference: a frequency hopping scheme which nominally splits the 2.400 - 2.485 GHz band in 79 frequency channels and a time division duplex (TDD) scheme which is used to switch to a new frequency channel on 625 μs boundaries. During normal operation a Bluetooth device will be active on a different frequency channel every 625 μs, thus minimizing the chances of continuous interference impacting the performance of the system. The smallest unit of a Bluetooth network is called a piconet, and can have a maximum of eight nodes. Bluetooth devices must assume one of two roles within a piconet, master or slave, where the master governs quality of service and the frequency hopping schedule within the piconet and the slave follows the master’s schedule. A piconet must have a single master and up to 7 active slaves. By allowing devices to have roles in multiple piconets through time multiplexing, i.e. slave/slave or master/slave, the Bluetooth technology allows for interconnecting multiple piconets into larger networks called scatternets. The Bluetooth technology is explored in the context of enabling ad-hoc networks. The Bluetooth specification provides flexibility in the scatternet formation protocol, outlining only the mechanisms necessary for future protocol implementations. A new protocol for scatternet formation and maintenance - mscat - is presented and its performance is evaluated using a Bluetooth simulator. The free variables manipulated in this study include device activity and the probabilities of devices performing discovery procedures. The relationship between the role a device has in the scatternet and it’s probability of performing discovery was examined and related to the scatternet topology formed. The results show that mscat creates dense network topologies for networks of 30, 50 and 70 nodes. The mscat protocol results in approximately a 33% increase in slaves/piconet and a reduction of approximately 12.5% of average roles/node. For 50 node scenarios the set of parameters which creates the best determined outcome is unconnected node inquiry probability (UP) = 10%, master node inquiry probability (MP) = 80% and slave inquiry probability (SP) = 40%. The mscat protocol extends the Bluetooth specification for formation and maintenance of scatternets in an ad-hoc network.

Gender - an Issue for German Welfare Organisation

During the last months and years the English expression 'gender' has become a well-known word all over Germany, often with the annex 'mainstreaming'. Gender mainstreaming was initiated as a political strategy by the Women's World Conference in Beijing in 1995 and adopted by the European Union in 1997 (COM(96)76 final). It basically means that all actions and initiatives planned have to be tested as to their effects on women and men and should not be taken if they disadvantage either one. But gender is also a category in the discussion about democratic features. Gender democracy means that males and females should be represented equally in the public, political, cultural, social and economic sphere of a society. On this background, this paper traces the gender issue in the field of organizations in the social sector of Germany, in particular the 'welfare organizations'. In this article, 'welfare organizations' is used as a translation of the German word 'Wohlfahrtsverbände'. The reason for this choice is the endeavor to indicate their difference from for instance English 'charitable associations' or French 'associations sociale et sanitaire', because social organizations in the EU-member states differ considerably in regard to their history, function, self-image , financing, political power etc.. The terms 'social non-governmental organizations' (NGOs) or 'social nonprofit organizations' (NPOs ) are used synonymously.

Internet-Based Guided Self-Help for Several Anxiety Disorders: A Randomized Controlled Trial Comparing a Tailored With a Standardized Disorder-Specific Approach

Internet-delivered self-help with minimal therapist guidance has shown promising results for a number of diagnoses. Most of the evidence comes from studies evaluating standardized disorder-specific treatments. A recent development in the field includes transdiagnostic and tailored Internet-based treatments that address comorbid symptoms and a broader range of patients. This study evaluated an Internet-based tailored guided self-help treatment, which targeted symptoms of social anxiety disorder, panic disorder with or without agoraphobia, and generalized anxiety disorder. The tailored treatment was compared both with standardized disorder-specific Internet-based treatment and with a wait-list control group. Both active treatment conditions were based on cognitive-behavioral therapy and lasted for 8 weeks. A total of 132 individuals meeting diagnostic criteria for at least one of the anxiety disorders were randomly assigned to 1 of the 3 conditions. Both treatment groups showed significant symptom reductions as compared with the wait-list control group on primary disorder-unspecific measures of anxiety, depression, and general symptomatology and on secondary anxiety disorder-specific measures. Based on the intention-to-treat sample, mean between-group effect sizes were d = 0.80 for the tailored treatment and d = 0.82 for the standardized treatment, versus wait-list controls. Treatment gains were maintained at 6-month follow-up. No differences were found between the 2 active treatment conditions on any of the measures, including a telephone-administered diagnostic interview conducted at posttreatment. The findings suggest that both Internet-based tailored guided self-help treatments and Internet-based standardized treatments are promising treatment options for several anxiety disorders

Ethnic Minority Children’s Active Commuting to School and Association with Physical Activity and Pedestrian Safety Behaviors

Background: Children's active commuting to school, i.e. walking or cycling to school, was associated with greater moderate-to-vigorous physical activity, although studies among ethnic minorities are sparse. Objectives: Among a low-income, ethnic minority sample of fourth grade students from eight public schools, we examined (1) correlates of active commuting to school and (2) the relationship between active commuting to school and moderate-to-vigorous physical activity. Methods: We conducted a cross-sectional analysis of baseline measurements from a sample of participants (n=149) aged 9-12 years from a walk to school intervention study in Houston, Texas. The primary outcome was the weekly rate of active commuting to school. Daily moderate-to-vigorous physical activity, measured by accelerometers, was a secondary outcome. Child self-efficacy (alpha=0.75), parent self-efficacy (alpha=0.88), and parent outcome expectations (alpha=0.78) were independent variables. Participant characteristics (age, gender, race/ethnicity, distance from home to school, acculturation, and BMI percentile) were independent sociodemographic variables. We used mixed-model regression analyses to account for clustering by school and a stepwise procedure with backward elimination of non-significant interactions and covariates to identify significant moderators and predictors. School-level observations of student pedestrians were assessed and compared using chi-square tests of independence. Results: Among our sample, which was 61.7% Latino, the overall rate of active commuting to school was 43%. In the mixed model for active commuting to school, parent self-efficacy (std. beta = 0.18, p=0.018) and age (std. beta = 0.18, p=0.018) were positively related. Latino students had lower rates of active commuting to school than non-Latinos ( 16.5%, p=0.040). Distance from home to school was inversely related to active commuting to school (std. beta = 0.29, p<0.001). In the mixed model for moderate-to-vigorous physical activity, active commuting to school was positively associated (std. beta = 0.31, p <0.001). Among the Latino subsample, child acculturation was negatively associated with active commuting to school (std. beta = -0.23, p=0.01). With regard to school-level pedestrian safety observations, 37% of students stopped at the curb and 2.6% looked left-right-left before crossing the street. Conclusion: Although still below national goals, the rate of active commuting was relatively high, while the rate of some pedestrian safety behaviors was low among this low-income, ethnic minority population. Programs and policies to encourage safe active commuting to school are warranted and should consider the influence of parents, acculturation, and ethnicity.

Internet-based individually versus group guided self-help treatment for social anxiety disorder: protocol of a randomized controlled trial

BACKGROUND: Social anxiety disorder (SAD) is one of the most common mental disorders and causes subjective suffering and economic burden worldwide. Although effective treatments are available, a lot of cases go untreated. Internet-based self-help is a low-threshold and flexible treatment alternative for SAD. Various studies have already shown that internet-based self-help can be effective to reduce social phobic symptoms significantly. Most of the interventions tested include therapist support, whereas the role of peer support within internet-based self-help has not yet been fully understood. There is evidence suggesting that patients' mutual exchange via integrated discussion forums can increase the efficacy of internet-based treatments. This study aims at investigating the added value of therapist-guided group support on the treatment outcome of internet-based self-help for SAD. METHODS/DESIGN: The study is conducted as a randomized controlled trial. A total of 150 adults with a diagnosis of SAD are randomly assigned to either a waiting-list control group or one of the active conditions. The participants in the two active conditions use the same internet-based self-help program, either with individual support by a psychologist or therapist-guided group support. In the group guided condition, participants can communicate with each other via an integrated, protected discussion forum. Subjects are recruited via topic related websites and links; diagnostic status will be assessed with a telephone interview. The primary outcome variables are symptoms of SAD and diagnostic status after the intervention. Secondary endpoints are general symptomology, depression, quality of life, as well as the primary outcome variables 6 months later. Furthermore, process variables such as group processes, the change in symptoms and working alliance will be studied. DISCUSSION: The results of this study should indicate whether group-guided support could enhance the efficacy of an internet-based self-help treatment for SAD. This novel treatment format, if shown effective, could represent a cost-effective option and could further be modified to treat other conditions, as well.

The effects of exercise on self-rated sleep among adults with chronic sleep complaints

Purpose The purpose of this study was to evaluate whether and to what extent the observed effects on self-rated sleep in a previous study using a combined treatment program with physical exercise and sleep education can be attributed by the physical activity (PA) component. Methods The present study reports supplementary analysis of an already described and published study. Data were provided by a nonclinical sample of 98 normal-active adults with chronic initiating and the maintaining of sleep complaints. The additional analysis included sleep log, exercise log, and daily pedometer data which were collected during a baseline week and 6-week of a combined intervention. Results The results indicate that the number of steps (p = 0.02) and the duration of PA (p = 0.01) is significantly related to the improvement in subjective sleep measures and therefore reveal an independent effect within this combined sleep program. Sleep diary data (recuperation of sleep, number of awakenings after sleep onset, and wake time after sleep onset time) improved significant (all p < 0.01) over the intervention program. About 50% of the participants stated that the PA had an effect on their improvement. Conclusion Improvements on subjective sleep quality after a combined intervention cannot be attributed to the cognitive component alone, but PA has an independent effect. Adults with chronic sleep complaints benefit from exercise. Therefore structured PA should be implemented in any sleep management programs.

Brain sources of EEG gamma frequency during volitionally meditation-induced, altered states of consciousness, and experience of the self.

Multichannel EEG of an advanced meditator was recorded during four different, repeated meditations. Locations of intracerebral source gravity centers as well as Low Resolution Electromagnetic Tomography (LORETA) functional images of the EEG 'gamma' (35-44 Hz) frequency band activity differed significantly between meditations. Thus, during volitionally self-initiated, altered states of consciousness that were associated with different subjective meditation states, different brain neuronal populations were active. The brain areas predominantly involved during the self-induced meditation states aiming at visualization (right posterior) and verbalization (left central) agreed with known brain functional neuroanatomy. The brain areas involved in the self-induced, meditational dissolution and reconstitution of the experience of the self (right fronto-temporal) are discussed in the context of neural substrates implicated in normal self-representation and reality testing, as well as in depersonalization disorders and detachment from self after brain lesions.

Mid-term results of aortic root replacement using a self-assembled biological composite graft.

OBJECTIVES To report the mid-term results of aortic root replacement using a self-assembled biological composite graft, consisting of a vascular tube graft and a stented tissue valve. METHODS Between January 2005 and December 2011, 201 consecutive patients [median age 66 (interquartile range, IQR, 55-77) years, 31 female patients (15.4%), median logistic EuroSCORE 10 (IQR 6.8-23.2)] underwent aortic root replacement using a stented tissue valve for the following indications: annulo-aortic ectasia or ascending aortic aneurysm with aortic valve disease in 162 (76.8%) patients, active infective endocarditis in 18 (9.0%) and acute aortic dissection Stanford type A in 21 (10.4%). All patients underwent clinical and echocardiographic follow-up. We analysed survival and valve-related events. RESULTS The overall in-hospital mortality rate was 4.5%. One- and 5-year cardiac-related mortality rates were 3 and 6%, and overall survival was 95 ± 1.5 and 75 ± 3.6%, respectively. The rate of freedom from structural valve failure was 99% and 97 ± 0.4% at the 1- and 5-year follow-up, respectively. The incidence rates of prosthetic valve endocarditis were 3 and 4%, respectively. During a median follow-up of 28 (IQR 14-51) months, only 2 (1%) patients required valve-related redo surgery due to prosthetic valvular endocarditis and none suffered from thromboembolic events. One percent of patients showed structural valve deterioration without any clinical symptoms; none of the patients suffered greater than mild aortic regurgitation. CONCLUSIONS Aortic root replacement using a self-assembled biological composite graft is an interesting option. Haemodynamic results are excellent, with freedom from structured valve failure. Need for reoperation is extremely low, but long-term results are necessary to prove the durability of this concept.

The Exploitation of Versatile Building Blocks for the Self-Assembly of Novel Molecular Magnets

Using molecular building blocks to self-assemble lattices supporting long-range magnetic order is currently an active area of solid-state chemistry. Consequently, it is the realm of supramolecular chemistry that synthetic chemists are turning to in order to develop techniques for the synthesis of structurally well-defined supramolecular materials. In recent years we have investigated the versatility and usefulness of two classes of molecular building blocks, namely, tris-oxalato transition-metal (M. Pilkington and S. Decurtins, in “Magnetoscience—From Molecules to Materials,” Wiley–VCH, 2000), and octacyanometalate complexes (Pilkington and Decurtins, Chimia 54, 593 (2001)), for applications in the field of molecule-based magnets. Anionic, tris-chelated oxalato building blocks are able to build up two-dimensional honeycomb-layered structural motifs as well as three-dimensional decagon frameworks. The discrimination between the crystallization of the two- or three-dimensional structures relies on the choice of the templating counterions (Decurtins, Chimia 52, 539 (1998); Decurtins et al. Mol. Cryst. Liq. Cryst. 273, 167 (1995); New J. Chem. 117 (1998)). These structural types display a range of ferro, ferri, and antiferromagnetic properties (Pilkington and Decurtins, in “Magnetoscience—From Molecules to Materials”). Octacyanometalate building blocks self-assemble to afford two new classes of cyano-bridged compounds namely, molecular clusters and extended three dimensional networks (J. Larionova et al., Angew. Chem. Int. Ed. 39, 1605 (2000); Pilkington et al., in preparation). The molecular cluster with a MnII9MoV6 core has the highest ground state spin value, S=51/2, reported to-date (Larionova et al., Angew. Chem. Int. Ed. 39, 1605 (2000)). In the high-temperature regime, the magnetic properties are characterized by ferromagnetic intracluster coupling. In the magnetic range below 44 K, the magnetic cluster signature is lost as possibly a bulk behavior starts to emerge. The three-dimensional networks exhibit both paramagnetic and ferromagnetic behavior, since the magnetic properties of these materials directly reflect the electronic configuration of the metal ion incorporated into the octacyanometalate building blocks (Pilkington et al., in preparation). For both the oxalate- and cyanide-bridged materials, we are able to manipulate the magnetic properties of the supramolecular assemblies by tuning the electronic configurations of the metal ions incorporated into the appropriate molecular building blocks (Pilkington and Decurtins, in “Magnetoscience—From Molecules to Materials,” Chimia 54, 593 (2000)).

Layer-by-layer grown scalable redox-active ruthenium-based molecular multilayer thin films for electrochemical applications and beyond

Here we report the first study on the electrochemical energy storage application of a surface-immobilized ruthenium complex multilayer thin film with anion storage capability. We employed a novel dinuclear ruthenium complex with tetrapodal anchoring groups to build well-ordered redox-active multilayer coatings on an indium tin oxide (ITO) surface using a layer-by-layer self-assembly process. Cyclic voltammetry (CV), UV-Visible (UV-Vis) and Raman spectroscopy showed a linear increase of peak current, absorbance and Raman intensities, respectively with the number of layers. These results indicate the formation of well-ordered multilayers of the ruthenium complex on ITO, which is further supported by the X-ray photoelectron spectroscopy analysis. The thickness of the layers can be controlled with nanometer precision. In particular, the thickest layer studied (65 molecular layers and approx. 120 nm thick) demonstrated fast electrochemical oxidation/reduction, indicating a very low attenuation of the charge transfer within the multilayer. In situ-UV-Vis and resonance Raman spectroscopy results demonstrated the reversible electrochromic/redox behavior of the ruthenium complex multilayered films on ITO with respect to the electrode potential, which is an ideal prerequisite for e.g. smart electrochemical energy storage applications. Galvanostatic charge–discharge experiments demonstrated a pseudocapacitor behavior of the multilayer film with a good specific capacitance of 92.2 F g−1 at a current density of 10 μA cm−2 and an excellent cycling stability. As demonstrated in our prototypical experiments, the fine control of physicochemical properties at nanometer scale, relatively good stability of layers under ambient conditions makes the multilayer coatings of this type an excellent material for e.g. electrochemical energy storage, as interlayers in inverted bulk heterojunction solar cell applications and as functional components in molecular electronics applications.

Validity and reliability of a measure of Latina mother's nutritional self-efficacy

Background. Not only has obesity played a role in Texas adults but it is also becoming a large issue among low-income Latino children. In Latino children between 2-5 years of age, the Pediatric Nutrition Surveillance data in 1997 found the prevalence of obesity was 12 percent, highest among all ethnic groups. Children learn what and how to eat from their environment. Despite many mothers being working mothers they are still the principal caregivers and source of influence on their toddler's diet. Self-efficacy, a concept created by Albert Bandura, one's belief that one is capable of performing a behavior needed to reach an intended goal, is increasingly becoming important in nutrition and health education. This study is important to understand the degree of impact that a mother's self-efficacy will have on a child's diet. This is useful knowing if influencing a mother's self-efficacy could improve a child's diet to prevent certain public health issues such as obesity and diabetes. The purpose of this study was to examine nutrition self-efficacy of Latina mothers, focusing on sweets and beverage and if their self-efficacy impacted their child's diet. Methods. The data was collected during July-September 2008. Mothers were recruited from two federally qualified San Antonio health centers. In order to qualify, participants had to be Hispanic with children of toddler age. Mothers were informed of incentives available upon completion. The interview consisted of demographic info, a set of five self-efficacy questions repeated at completion, testing reliability and a 24-hour food recall diary asked of the participant's child's diet. Results. There were 225 mothers who participated between both clinics. The Crohnbach alpha scores for the two different times the self-efficacy questions were asked were .44 corresponding to the first time and .49 for the second time. The three most common beverages reported were milk, juice, and water. The mothers who met or gave their child more milk than recommended by the scientific community, 800mg of calcium/3 cups (24oz) set, had a higher self-efficacy score than those who did not meet the standard at all. Mothers who gave their children more juice than the standard recommends, 4-6oz for children 1-6 years of age, had slightly higher self-efficacy scores than mother's who simply met the standard. In general, the lower the mother's self-efficacy, the more sweets they gave their child and vice versa. Conclusion. This study's Kappa values were adequate and this research showed that Latina mothers did in fact have high self-efficacy. In general some of the children's diets did not reflect the current scientific nutrition recommendations. In order to improve self-efficacy and have an impact on children's diets, the scientific community has a responsibility to make recommendations that are easily understood and can be put into practice. The public health community needs to ensure that we encourage those we serve to be more active in their health and educate them about what constitutes good health and nutrition for both themselves and their children.^

Physical activity levels and access to places to be physically active

The built environment is recognized as having an impact on health and physical activity. Ecological theories of physical activity suggest that enhancing access to places to be physically active may increase activity levels. Studies show that users of fitness facilities are more likely to be active than inactive and active people are more likely to report access to fitness facilities. The purpose of this study was to examine the ecologic relationship between density of fitness facilities and self-reported levels of physical activity in adults in selected Metropolitan Statistical Areas (MSAs) in the United States.^ The 2007 MSA Business Patterns and the 2007 Behavioral Risk Factor Surveillance System (BRFSS) were used to gather fitness facility and physical activity data for 141 MSAs in the United States. Pearson correlations were performed between fitness facility density (number of facilities/100,000 people) and six summary measures of physical activity prevalence. Regional analysis was done using the nine U.S. Standard Regions for Temperature and Precipitation. ^ Direct correlations between fitness facility density and the percent of those physically active (r=0.27, 95% CI 0.11, 0.42, p=0.0012), those meeting moderate-intensity activity guidelines, (r=0.23, 95% CI 0.07, 0.38, p=0.006), and those meeting vigorous-intensity activity guidelines (r=0.30, 95% CI 0.14, 0.44, p=0.003) were found. An inverse correlation was found between fitness facility density and the percent of people physically inactive (r=-0.45, 95% CI -0.57, -0.31), p<0.0001). Regional analysis showed the same trends across most regions.^ Access to fitness facilities, defined here as fitness facility density, is related to physical activity levels. Results suggest the potential importance of the influence of the built environment on physical activity behaviors. Public health officials and city planners should consider the possible positive effect that increasing the number of fitness facilities in communities would have on activity levels.^

‘This square is our home!’: the organisation of urban space in the spanish 15M movement

Why should a progressive planner/urbanist pay attention to the Spanish 15M movement? From a disciplinary standpoint, its most complex and interesting aspect, which could hypothetically be transferred to other contexts (as in fact happened in the Occupy Wall Street and Occupy London movements), is its 'spatiality'. This article analyses the spatial practices of the so called #spanishrevolution, one of the 2011 social movements that showed the possibility for a new collective appropriation and self-management (autogestion) of urban public space. Although the political goals of the movement were vague at the time of its inception, the practices and spatial imaginaries deployed by it have become consolidated and proven to be yet another of its more successful facets in promoting the spreading and organisation of the protest, making it a phenomenon that calls for reflection on the part of urban thinkers and planners.

Self assembled and ordered group III nitride nanocolumnar structures for light emitting applications

El objetivo de este trabajo es un estudio profundo del crecimiento selectivo de nanoestructuras de InGaN por epitaxia de haces moleculares asistido por plasma, concentrandose en el potencial de estas estructuras como bloques constituyentes en LEDs de nueva generación. Varias aproximaciones al problema son discutidas; desde estructuras axiales InGaN/GaN, a estructuras core-shell, o nanoestructuras crecidas en sustratos con orientaciones menos convencionales (semi polar y no polar). La primera sección revisa los aspectos básicos del crecimiento auto-ensamblado de nanocolumnas de GaN en sustratos de Si(111). Su morfología y propiedades ópticas son comparadas con las de capas compactas de GaN sobre Si(111). En el caso de las columnas auto-ensambladas de InGaN sobre Si(111), se presentan resultados sobre el efecto de la temperatura de crecimiento en la incorporación de In. Por último, se discute la inclusión de nanodiscos de InGaN en las nanocolumnas de GaN. La segunda sección revisa los mecanismos básicos del crecimiento ordenado de nanoestructuras basadas en GaN, sobre templates de GaN/zafiro. Aumentando la relación III/V localmente, se observan cambios morfológicos; desde islas piramidales, a nanocolumnas de GaN terminadas en planos semipolares, y finalmente, a nanocolumnas finalizadas en planos c polares. Al crecer nanodiscos de InGaN insertados en las nanocolumnas de GaN, las diferentes morfologias mencionadas dan lugar a diferentes propiedades ópticas de los nanodiscos, debido al diferente carácter (semi polar o polar) de los planos cristalinos involucrados. La tercera sección recoge experimentos acerca de los efectos que la temperatura de crecimiento y la razón In/Ga tienen en la morfología y emisión de nanocolumnas ordenadas de InGaN crecidas sobre templates GaN/zafiro. En el rango de temperaturas entre 650 y 750 C, la incorporacion de In puede modificarse bien por la temperatura de crecimiento, o por la razón In/Ga. Controlar estos factores permite la optimización de la longitud de onda de emisión de las nanocolumnas de InGaN. En el caso particular de la generación de luz blanca, se han seguidos dos aproximaciones. En la primera, se obtiene emisión amarilla-blanca a temperatura ambiente de nanoestructuras donde la región de InGaN consiste en un gradiente de composiciones de In, que se ha obtenido a partir de un gradiente de temperatura durante el crecimiento. En la segunda, el apilamiento de segmentos emitiendo en azul, verde y rojo, consiguiendo la integración monolítica de estas estructuras en cada una de las nanocolumnas individuales, da lugar a emisores ordenados con un amplio espectro de emisión. En esta última aproximación, la forma espectral puede controlarse con la longitud (duración del crecimiento) de cada uno de los segmentos de InGaN. Más adelante, se presenta el crecimiento ordenado, por epitaxia de haces moleculares, de arrays de nanocolumnas que son diodos InGaN/GaN cada una de ellas, emitiendo en azul (441 nm), verde (502 nm) y amarillo (568 nm). La zona activa del dispositivo consiste en una sección de InGaN, de composición constante nominalmente y longitud entre 250 y 500 nm, y libre de defectos extendidos en contraste con capas compactas de InGaN de similares composiciones y espesores. Los espectros de electroluminiscencia muestran un muy pequeño desplazamiento al azul al aumentar la corriente inyectada (desplazamiento casi inexistente en el caso del dispositivo amarillo), y emisiones ligeramente más anchas que en el caso del estado del arte en pozos cuánticos de InGaN. A continuación, se presenta y discute el crecimiento ordenado de nanocolumnas de In(Ga)N/GaN en sustratos de Si(111). Nanocolumnas ordenadas emitiendo desde el ultravioleta (3.2 eV) al infrarrojo (0.78 eV) se crecieron sobre sustratos de Si(111) utilizando una capa compacta (“buffer”) de GaN. La morfología y eficiencia de emisión de las nanocolumnas emitiendo en el rango espectral verde pueden ser mejoradas ajustando las relaciones In/Ga y III/N, y una eficiencia cuántica interna del 30% se deriva de las medidas de fotoluminiscencia en nanocolumnas optimizadas. En la siguiente sección de este trabajo se presenta en detalle el mecanismo tras el crecimiento ordenado de nanocolumnas de InGaN/GaN emitiendo en el verde, y sus propiedades ópticas. Nanocolumnas de InGaN/GaN con secciones largas de InGaN (330-830 nm) se crecieron tanto en sustratos GaN/zafiro como GaN/Si(111). Se encuentra que la morfología y la distribución espacial del In dentro de las nanocolumnas dependen de las relaciones III/N e In/Ga locales en el frente de crecimiento de las nanocolumnas. La dispersión en el contenido de In entre diferentes nanocolumnas dentro de la misma muestra es despreciable, como indica las casi identicas formas espectrales de la catodoluminiscencia de una sola nanocolumna y del conjunto de ellas. Para las nanocolumnas de InGaN/GaN crecidas sobre GaN/Si(111) y emitiendo en el rango espectral verde, la eficiencia cuántica interna aumenta hasta el 30% al disminuir la temperatura de crecimiento y aumentar el nitrógeno activo. Este comportamiento se debe probablemente a la formación de estados altamente localizados, como indica la particular evolución de la energía de fotoluminiscencia con la temperatura (ausencia de “s-shape”) en muestras con una alta eficiencia cuántica interna. Por otro lado, no se ha encontrado la misma dependencia entre condiciones de crecimiento y efiencia cuántica interna en las nanoestructuras InGaN/GaN crecidas en GaN/zafiro, donde la máxima eficiencia encontrada ha sido de 3.7%. Como alternativa a las nanoestructuras axiales de InGaN/GaN, la sección 4 presenta resultados sobre el crecimiento y caracterización de estructuras core-shell de InGaN/GaN, re-crecidas sobre arrays de micropilares de GaN fabricados por ataque de un template GaN/zafiro (aproximación top-down). El crecimiento de InGaN/GaN es conformal, con componentes axiales y radiales en el crecimiento, que dan lugar a la estructuras core-shell con claras facetas hexagonales. El crecimiento radial (shell) se ve confirmado por medidas de catodoluminiscencia con resolución espacial efectuadas en un microscopio electrónico de barrido, asi como por medidas de microscopía de transmisión de electrones. Más adelante, el crecimiento de micro-pilares core-shell de InGaN se realizó en pilares GaN (cores) crecidos selectivamente por epitaxia de metal-orgánicos en fase vapor. Con el crecimiento de InGaN se forman estructuras core-shell con emisión alrededor de 3 eV. Medidas de catodoluminiscencia resuelta espacialmente indican un aumento en el contenido de indio del shell en dirección a la parte superior del pilar, que se manifiesta en un desplazamiento de la emisión de 3.2 eV en la parte inferior, a 3.0 eV en la parte superior del shell. Este desplazamiento está relacionado con variaciones locales de la razón III/V en las facetas laterales. Finalmente, se demuestra la fabricación de una estructura pin basada en estos pilares core-shell. Medidas de electroluminiscencia resuelta espacialmente, realizadas en pilares individuales, confirman que la electroluminiscencia proveniente del shell de InGaN (diodo lateral) está alrededor de 3.0 eV, mientras que la emisión desde la parte superior del pilar (diodo axial) está alrededor de 2.3 eV. Para finalizar, se presentan resultados sobre el crecimiento ordenado de GaN, con y sin inserciones de InGaN, en templates semi polares (GaN(11-22)/zafiro) y no polares (GaN(11-20)/zafiro). Tras el crecimiento ordenado, gran parte de los defectos presentes en los templates originales se ven reducidos, manifestándose en una gran mejora de las propiedades ópticas. En el caso de crecimiento selectivo sobre templates con orientación GaN(11-22), no polar, la formación de nanoestructuras con una particular morfología (baja relación entre crecimiento perpedicular frente a paralelo al plano) permite, a partir de la coalescencia de estas nanoestructuras, la fabricación de pseudo-templates no polares de GaN de alta calidad. ABSTRACT The aim of this work is to gain insight into the selective area growth of InGaN nanostructures by plasma assisted molecular beam epitaxy, focusing on their potential as building blocks for next generation LEDs. Several nanocolumn-based approaches such as standard axial InGaN/GaN structures, InGaN/GaN core-shell structures, or InGaN/GaN nanostructures grown on semi- and non-polar substrates are discussed. The first section reviews the basics of the self-assembled growth of GaN nanocolumns on Si(111). Morphology differences and optical properties are compared to those of GaN layer grown directly on Si(111). The effects of the growth temperature on the In incorporation in self-assembled InGaN nanocolumns grown on Si(111) is described. The second section reviews the basic growth mechanisms of selectively grown GaNbased nanostructures on c-plane GaN/sapphire templates. By increasing the local III/V ratio morphological changes from pyramidal islands, to GaN nanocolumns with top semi-polar planes, and further to GaN nanocolumns with top polar c-planes are observed. When growing InGaN nano-disks embedded into the GaN nanocolumns, the different morphologies mentioned lead to different optical properties, due to the semipolar and polar nature of the crystal planes involved. The third section reports on the effect of the growth temperature and In/Ga ratio on the morphology and light emission characteristics of ordered InGaN nanocolumns grown on c-plane GaN/sapphire templates. Within the growth temperature range of 650 to 750oC the In incorporation can be modified either by the growth temperature, or the In/Ga ratio. Control of these factors allows the optimization of the InGaN nanocolumns light emission wavelength. In order to achieve white light emission two approaches are used. First yellow-white light emission can be obtained at room temperature from nanostructures where the InGaN region is composition-graded by using temperature gradients during growth. In a second approach the stacking of red, green and blue emitting segments was used to achieve the monolithic integration of these structures in one single InGaN nanocolumn leading to ordered broad spectrum emitters. With this approach, the spectral shape can be controlled by changing the thickness of the respective InGaN segments. Furthermore the growth of ordered arrays of InGaN/GaN nanocolumnar light emitting diodes by molecular beam epitaxy, emitting in the blue (441 nm), green (502 nm), and yellow (568 nm) spectral range is reported. The device active region, consisting of a nanocolumnar InGaN section of nominally constant composition and 250 to 500 nm length, is free of extended defects, which is in strong contrast to InGaN layers (planar) of similar composition and thickness. Electroluminescence spectra show a very small blue shift with increasing current, (almost negligible in the yellow device) and line widths slightly broader than those of state-of-the-art InGaN quantum wells. Next the selective area growth of In(Ga)N/GaN nanocolumns on Si(111) substrates is discussed. Ordered In(Ga)N/GaN nanocolumns emitting from ultraviolet (3.2 eV) to infrared (0.78 eV) were then grown on top of GaN-buffered Si substrates. The morphology and the emission efficiency of the In(Ga)N/GaN nanocolumns emitting in the green could be substantially improved by tuning the In/Ga and total III/N ratios, where an estimated internal quantum efficiency of 30 % was derived from photoluminescence data. In the next section, this work presents a study on the selective area growth mechanisms of green-emitting InGaN/GaN nanocolumns and their optical properties. InGaN/GaN nanocolumns with long InGaN sections (330-830nm) were grown on GaN/sapphire and GaN-buffered Si(111). The nanocolumn’s morphology and spatial indium distribution is found to depend on the local group (III)/N and In/Ga ratios at the nanocolumn’s top. A negligible spread of the average indium incorporation among different nanostructures is found as indicated by similar shapes of the cathodoluminescence spectra taken from single nanocolumns and ensembles of nanocolumns. For InGaN/GaN nanocolumns grown on GaN-buffered Si(111), all emitting in the green spectral range, the internal quantum efficiency increases up to 30% when decreasing growth temperature and increasing active nitrogen. This behavior is likely due to the formation of highly localized states, as indicated by the absence of a complete s-shape behavior of the PL peak position with temperature (up to room temperature) in samples with high internal quantum efficiency. On the other hand, no dependence of the internal quantum efficiency on the growth conditions is found for InGaN/GaN nanostructures grown on GaN/sapphire, where the maximum achieved efficiency is 3.7%. As alternative to axial InGaN/GaN nanostructures, section 4 reports on the growth and characterization of InGaN/GaN core-shell structures on an ordered array of top-down patterned GaN microrods etched from a GaN/sapphire template. Growth of InGaN/GaN is conformal, with axial and radial growth components leading to core-shell structures with clear hexagonal facets. The radial InGaN growth (shell) is confirmed by spatially resolved cathodoluminescence performed in a scanning electron microscopy as well as in scanning transmission electron microscopy. Furthermore the growth of InGaN core-shell micro pillars using an ordered array of GaN cores grown by metal organic vapor phase epitaxy as a template is demonstrated. Upon InGaN overgrowth core-shell structures with emission at around 3.0 eV are formed. With spatially resolved cathodoluminescence, an increasing In content towards the pillar top is found to be present in the InGaN shell, as indicated by a shift of CL peak position from 3.2 eV at the shell bottom to 3.0 eV at the shell top. This shift is related to variations of the local III/V ratio at the side facets. Further, the successful fabrication of a core-shell pin diode structure is demonstrated. Spatially resolved electroluminescence measurements performed on individual micro LEDs, confirm emission from the InGaN shell (lateral diode) at around 3.0 eV, as well as from the pillar top facet (axial diode) at around 2.3 eV. Finally, this work reports on the selective area growth of GaN, with and without InGaN insertion, on semi-polar (11-22) and non-polar (11-20) templates. Upon SAG the high defect density present in the GaN templates is strongly reduced as indicated by TEM and a dramatic improvement of the optical properties. In case of SAG on non-polar (11-22) templates the formation of nanostructures with a low aspect ratio took place allowing for the fabrication of high-quality, non-polar GaN pseudo-templates by coalescence of the nanostructures.