Implantação iônica por imersão em plasma e deposição de filmes finos poliméricos provenientes da mistura hexametildisilazano/argônio

Thin polymeric films deposited by plasma are very atractive for many industrial and scientific applications, in areas such as electronics, mechanics, coatings, biomaterials, among others, due to its favorable properties such as good adhesion to the substrate, high crosslinking, nanomectric thickness, homogeneity, etc. In this work, thin films were deposited by plasma immersion ion implantation and deposition technique from a hexamethyldisilazane/argon mixture at different proportions. These films were subjected to several characterizations, such as, contact angle, which presented values near to 100 degrees, surface energy, with values near to 31 mJ/m2, hardness with values between 0.7 and 2.6 GPa, thickness from 100 to 200 nm, refractive index from 1.56 to 1.64, molecular structure presenting the following functional groups in the infrared spectra region: CHx from 2960 to 2900 cm-1; Si-H around 2130 cm-1; CH3 in Si-(CH3)x around 1410 cm-1; CH3 in Si-(CH3)x in 1260 cm-1; N-H around 1180 cm-1; CH2 in Si-CH2-Si bonds around 1025 cm-1; Si-O in Si-O-Si from 1020 to 1100 cm-1; Si-N in Si-H-Si bonds around 940 cm-1; CH3 in Si-(CH3)3 in 850 cm-1; Si-C bonds in Si-(CH3)2 around 800 cm-1; and Si-H in 680 cm-1 . From these characterizations, it was possible to conclude that the concentration of argon or hexamethyldisilazane in the mixture changed the resulting polymer

Adsorção de Cádmio em Solo da Cidade de Neves Paulista

A contaminação do solo é um dos principais problemas ambientais, podendo ocorrer de diversas maneiras, sendo a principal causa fertilização e a calagem do solo, os quais, geralmente possuem em sua composição metais pesados. O objetivo deste estudo é avaliar a capacidade de adsorção de Cádmio em solo da cidade de Neves Paulista, com base nos modelos matemáticos de Langmuir e Freundlich, correlacionar a adsorção com os fatores pH e força iônica do meio e verificar, por meio da energia livre, a espontaneidade do processo de adsorção. Trata-se de solo arenoso de baixa acidez, pobre em matéria orgânica e com baixo teor de capacidade de troca iônica. Para avaliar a capacidade de adsorção de Cádmio, foram realizados experimentos variando a concentração do metal de 0 a 100 mg L-1 . A adsorção foi avaliada em diferentes valores de pH e de força iônica do meio. Observou-se que o modelo de Langmuir se ajustou melhor à adsorção do metal. A adsorção ocorre de maneira favorável em meio de força iônica baixa, e tende a ser desfavorável em valores mais elevados, demonstrando assim uma correlação negativa. Em relação ao pH a correlação foi positiva à adsorção. Os valores da energia livre foram negativos, o que demonstra a espontaneidade dos processos de adsorção.

Estudo da superfície de fibras de carbono após tratamento de implantação iônica por imersão em plasma (3IP)

In this work, plasma immersion ion implantation (PIII) treatments of carbon fibers (CFs) were performed in order to induce modifications of chemical and physical properties of the CF surface aimed to improve the performance of thermoplastic composite. The samples to be treated were immersed in nitrogen or air glow discharge plasma and pulsed at −3.0 kV for 2.0, 5.0, 10.0, and 15.0 min. After PIII processing, the specimens were characterized by atomic force microscopy (AFM), scanning electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). After CFs treatments, the CF/Polypropylene (PP) composites were produced by hot pressing method. Surface morphology of as-received CFs exhibited some scratches aligned along the fibers due to the fiber manufacturing process. After both treatments, these features became deeper, and also, a number of small particles nonuniformly distributed on the fiber surface can be observed. These particles are product of CF surface sputtering during the PIII treatment, which removes the epoxy layer that covers as-received samples. AFM analyses of CF samples treated with nitrogen depicted a large increase of the surface roughness (Rrms value approximately six times higher than that of the untreated sample). The increase of the roughness was also observed for samples treated by air PIII. Raman spectra of all samples presented the characteristic D- and G-bands at approximately 1355 and 1582 cm−1, respectively. Analysis of the surface chemical composition provided by the XPS showed that nitrogen and oxygen were incorporated onto the surface. The polar radicals formed on the surface lead to increasing of the CF surface energy. Both the modification of surface roughness and the surface oxidation contributed for the enhancement of CF adhesion to the polymeric matrix. These features were confirmed ... (Complete abstract click electronic access below)

Fadiga axial do aço inoxidável 15-5 PH tratado pela implantação iônica por imersão em plasma

When materials for application in aircraft structural components are studied, it must be considered that they will be submitted to cyclic loading, and this is an important parameter to design the study in fatigue life of the materials. Whereas, for example, a landing gear operation, the study of fatigue life and corrosion in the materials used in it is essential, especially when you want to use new techniques for surface treatments. The objective is to study the influence of surface treatment of immersion ion implantation nitrogen plasma, in axial fatigue of Stainless steel 15-5 PH in 39-42 HRC condition. Stainless steel 15-5 PH was tested in axial fatigue and corrosion in salt spray. It was also performed microindentation tests, optical microscopy for microstructural analysis and scanning electron microscopy for fractographic analysis. It was observed that the 3IP had no effect on the thickness of the material and not the hardness of it, and still provided a significant increase in fatigue life of the material

Estudo da superfície do carbono vítreo reticulado após tratamento de implantação iônica por imersão em plasma (3IP) para a obtenção de eletrodos

In this work, RVC samples were treated by plasma immersion ion implantation (PIII) for electrodes production. High-voltage pulses with amplitudes of -3.0 kV or -10.0 kV were applied to the RVC samples while the treatment time was 10, 20 and 30 minutes. Nitrogen, atmospheric air and H2:N2 mixture were employed as plasma sources. The samples were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and electrochemical measurements. The SEM images present an apparent enhancement of the surface roughness after the treatment probably due to the surface sputtering during the PIII process. This observation is in agreement with the specific electrochemical surface area (SESA) of RVC electrodes. An increase was observed of the SESA values for the PIII treated samples compared to the untreated specimen. Some oxygen and nitrogen containing groups were introduced on the RVC surface after the PIII treatment. Both plasma-induced process: the surface roughening and the introduction of the polar species on the RVC surface are beneficial for the RVC electrodes application

Microencapsulação por gelificação iônica e interação eletrostática do corante de buriti (Mauritia flexuosa L. f.)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização de Filmes a-C:H:Cl e a-C:H:Si:Cl produzidos por deposição à vapor químico assistido por plasma (PECVD) e deposição e implantação iônica por imersão em plasma (PIIID)

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Emprego de carvão ativado e resinas de troca ionica na remoção de substâncias orgânicas contaminantes do alcool etílico

This work had with objective to characterize and evaluate the performance of the combined system, involving activated charcoal and ionic exchange resins in the removal of substances organic contaminating of the ethyl alcohol from the fermentation of the cassava starch. To testing was used ethyl alcohol PA 96 oGL, conductivity of 0.90 μS/cm at 25 oC, acidity of 60 mg/L and Barbet test of 43 minutes at 15 oC. The contaminated alcohol was composed of ethyl alcohol additive of higher alcohols, organic acids, ester, diol, aldehydes, ketone and ether. Contaminated alcohol was added 2% activated charcoal and after the adsorption isotherm in ionic exchange resins was tested. The adsorption with activated charcoal was performed in a Water Bath at 30 oC for one hour and a half and shaking. Already adsorption ionic exchange columns occurred at room temperature on columns of 93,4 cm in filling height and diameter of 2.29 cm, for flows of 180 mL/min and 90 mL/min. Samples were collected in the tests with charcoal and with each one of the resins and the following analyses were performed: conductivity, acidity and Barbet test. The medium values for conductivity, acidity and Barbet test after the adsorption in charcoal and cation and anion resins were respectively: conductivity was 240; 354 and 465 μS/cm to 25 oC; acidity of 1.081; 1.103 and 1.062 mg/L and the Barbet test was 21; 20 and 9 minutes to 15 oC. It was observed that the addition of 2% of activated charcoal and the permanence in the columns of adsorption was not sufficient to remove the organic substances contaminating of the ethyl alcohol.

Estudo da distribuição de tamanho e composição iônica de aerossóis e seus efeitos na capacidade de nuclear gotas de nuvens

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Filmes finos depositados pela técnica de implantação iônica por imersão em plasma e deposição (IIIPD), utilizando o monômero HMDSN e os gases argônio, hélio e nitrogênio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Emissão de gases de efeito estufa e estoque de carbono no solo em função do manejo e correção de acidez

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Emissão de gases de efeito estufa e estoque de carbono no sistema solo-planta em função do sistema de produção e da aplicação superficial de corretivo da acidez

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudos experimentais e teórico-computacionais de novos complexos nanozeólitas-enzimas empregados na produção de biocombustíveis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estructura de una red esencial de señalización que regula la homeostasis iónica en plantas

Las plantas son organismos sésiles que han desarrollado la capacidad para detectar variaciones sutiles en su ambiente y producir respuestas adaptativas mediante rutas de señalización. Los estímulos causados por el estrés biótico y abiótico son numerosos y dependiendo del tiempo de exposición y su intensidad, pueden reducir la tasa de crecimiento de las plantas y la producción. Los cambios en la concentración del calcio citosólico libre constituyen una de las primeras reacciones intracelulares a las situaciones de estrés abiótico. En esta situación, el calcio actúa como segundo mensajero y las variaciones en su concentración son descodificadas por proteínas de unión a calcio. Las más conocidas son las manos-EF y los dominios C2. Los dominios C2 han sido descritos como dominios de unión a lípidos dependientes de calcio. Estos dominios se consideran proteínas periféricas solubles en agua que se asocian de manera reversible a los lípidos de la membrana mediante una o dos regiones funcionales: el sitio de unión a calcio y el sitio polibásico. A pesar de que se conoce la estructura molecular de algunos dominios C2, se desconocen aspectos relacionados como las reglas que dirigen su forma de interaccionar con los diferentes fosfolípidos y proteínas, la posición que ocupan en la bicapa lipídica y su papel en la transmisión de señales. En esta tesis se ha estudiado una proteína de Arabidopsis thaliana (At3g17980) representativa de una nueva familia de proteínas con dominios C2, que consiste únicamente de un dominio C2. Esta proteína, llamada AtC2.1, ha sido clonada en el vector pETM11, expresada en E. coli y purificada a homogeneidad en dos pasos cromatográficos. Se obtuvieron cristales de AtC2.1 de buena calidad mediante técnicas de difusión de vapor. La proteína fue co-cristalizada con calcio, fosfocolina (POC) y el fosfolípido 1,2-dihexanoil-sn-glicero-3-fosfo-L-serina (PSF). Se recogieron ocho conjuntos de datos de difracción de rayos X empleando radiación sincrotrón. Los cristales difractaron hasta 1.6 Å de resolución. Siete de ellos pertenecían al grupo ortorrómbico P212121, con las dimensiones de la celdilla unidad a = 35.3, b = 88.9, c = 110.6 Å, y un cristal pertenecía al grupo espacial monoclínico C2, con a = 124.84, b = 35.27, c = 92.32 Å y = 121.70º. La estructura se resolvió mediante la técnica MR-SAD utilizando el cinc como dispersor anómalo. La estructura cristalina mostró que la molécula forma un dímero en el que cada protómero se pliega como un dominio C2 típico, con la topología tipo II y presenta una inserción de 43 aminoácidos que la diferencia de los dominios C2 conocidos. El mapa de densidad electrónica mostró dos átomos de calcio por protómero. Se resolvieron las estructuras de AtC2.1 en complejo con POC o PSF. En ambos complejos, el análisis cristalográfico detectó máximos de densidad electrónica en la región correspondiente al sitio polibásico formado por las hebras 2, 3 5 y el lazo 3. Éstos se interpretaron correctamente como dos moléculas de POC y un átomo de cinc, en un complejo, y como la cabeza polar del PSF en el otro. AtC2.1 define un sitio de interacción con lípidos dependiente de cinc. En conclusión, en este trabajo se presenta la estructura tridimensional de AtC2.1, miembro representativo de una familia de proteínas de Arabidopsis thaliana, identificadas como proteínas que interaccionan con los receptores de ABA. Estas proteínas están constituidas únicamente por un dominio C2. El análisis conjunto de los datos biofísicos y cristalográficos muestra que AtC2.1 es un sensor de calcio que une lípidos usando dos sitios funcionales. Estos datos sugieren un mecanismo de inserción en membrana dependiente de calcio que trae consigo la disociación de la estructura dimérica y, por consiguiente, un cambio en las propiedades de superficie de la molécula. Este mecanismo proporciona las bases del reconocimiento y transporte de los receptores de ABA y/o otras moléculas a la membrana celular. Plants are sessile organisms that have developed the capacity to detect slight variations of their environment. They are able to perceive biotic and abiotic stress signals and to transduce them by signaling pathways in order to trigger adaptative responses. Stress factors are numerous and, depending on their exposition time and their concentration, can reduce plant growth rate, limiting the productivity of crop plants. Changes in the cytosolic free calcium concentration are observed as one of the earliest intracellular reactions to abiotic stress signals. Calcium plays a key role as a second messenger, and calcium concentration signatures, called calcium signals, are decodified by calcium binding proteins. The main calcium binding structures are the EF-hand motif and the C2 domains. C2 domain is a calcium dependent lipid-binding domain of approximately 130 amino acids. C2 domain displays two functional regions: the Ca-binding region and the polybasic cluster. Both of them can interact with the membrane phospholipids. Despite the number of C2 domain 3D structures currently available, questions about how they interact with the different target phospholipids, their precise spatial position in the lipid bilayer, interactions with other proteins and their role in transmitting signals downstream, have not yet been explored. In this work we have studied an uncharacterized protein from Arabidopsis thaliana (At3g17980) consisting of only a single C2 domain, as member of a new protein C2-domain family. This protein called AtC2.1 was cloned into the pETM11 vector and expressed in E. coli, allowing the purification to homogeneity in two chromatographic steps. Good quality diffracting crystals were obtained using vapor-diffusion techniques. Crystals were co-crystalized with calcium; phosphocholine (POC) and/or the phospholipid 1,2-dihexanoyl-sn-glycero-3-phospho-L-serine (PSF). Eight data set were collected with synchrotron radiation. Crystals diffracted up to 1.6 Å resolution and seven of them belong to the orthorhombic space group P212121, with unit-cell parameters a = 35.3, b = 88.9, c = 110.6 Å. Another crystal was monoclinic, space group C2, with a = 124.84, b = 35.27, c = 92.32 Å and = 121.70º. The structural model was solved by MR-SAD using Zn2+ as anomalous scatterer. The crystal structure shows that the molecule is a dimer. Each monomer was folded as a canonical C2 domain with the topology II with a 43 residues insertion. The electron density map reveals two calcium ions per molecule. Structures of AtC2.1, complexed with POC and PSF, have been solved. Well-defined extra electron densities were found, in both complexes, within the concave surface formed by strands 2, 3, 5 and loop 3 of AtC2.1. These densities were clearly explained by the presence of the two POC molecules, one zinc atom and head groups of PSF, occupying the cavity of the polybasic site. AtC2.1 defines a new metal dependent lipid-binding site into the polybasic site. In conclusion, in this thesis it is presented the molecular structure of AtC2.1, a representative member of a family of Arabidopsis thaliana C2 domain proteins, of unknown function, but identified as a molecular interacting unit of the ABA receptors. The joint analyses of the biophysical and crystallographic data show that AtC2.1 is a calcium sensor that binds lipids in two sites and suggest a model of calcium-dependent membrane insertion mechanism that will involve either dimer dissociation or a strong rearrangement of the dimeric structure. This mechanism may be the basis for the recognition and delivery of ABA receptors or other protein molecules to cell membranes.