EXCESSO HÍDRICO SOBRE OS COMPONENTES do RENDIMENTO da CULTURA da SOJA

O cultivo da soja em solos hidromórficos do Estado do Rio Grande do Sul vem sendo utilizado como opção em rotação com arroz e pastagens. O presente trabalho teve como objetivos determinar o comportamento dos componentes do rendimento de quatro cultivares de soja, para as condições dos solos hidromórficos, e verificar as variações de comportamento em função do estádio de desenvolvimento em que ocorre o estresse por excesso hídrico. O experimento foi conduzido em uma estrutura com cobertura plástica, em vasos de PVC, no ano agrícola de 1995/96, no Departamento de Fitotecnia da UFSM, em Santa Maria, RS. O solo utilizado foi um planossolo pertencente à unidade de mapeamento Vacacaí. O delineamento experimental utilizado foi o de blocos ao acaso, fatorial (4 x 5) com três repetições. As cultivares Ocepar 14, FT Saray, IAS 5 e CEP 16 foram submetidas a tratamentos de saturação hídrica do solo por um período de 15 dias a partir dos estádios de desenvolvimento V2 e V6; e por um período de 10 dias a partir dos estádios R2, R3 e R4. Os resultados indicaram que as quatro cultivares de soja utilizadas apresentaram boa tolerância à saturação hídrica no solo e que, em termos de duração desse estresse, a tolerância à saturação hídrica no solo é maior no subperíodo vegetativo do que no subperíodo reprodutivo.

Digestão total e pré-cecal dos nutrientes em potros fistulados no íleo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Crystallization and preliminary X-ray diffraction analysis of XAC1151, a small heat-shock protein from Xanthomonas axonopodis pv. citri belonging to the alpha-crystallin family

The hspA gene (XAC1151) from Xanthomonas axonopodis pv. citri encodes a protein of 158 amino acids that belongs to the small heat-shock protein ( sHSP) family of proteins. These proteins function as molecular chaperones by preventing protein aggregation. The protein was crystallized using the sitting-drop vapour-diffusion method in the presence of ammonium phosphate. X-ray diffraction data were collected to 1.65 angstrom resolution using a synchrotron-radiation source. The crystal belongs to the rhombohedral space group R3, with unit-cell parameters a = b = 128.7, c = 55.3 angstrom. The crystal structure was solved by molecular-replacement methods. Structure refinement is in progress.

Crystal structure and infrared analysis of a new trinuclear platinum(II) complex with L-cysteine

A new trinuclear platinum(II) complex with cysteine of composition [Pt(C3H6NO2S)Cl](3)center dot(C2H6SO)(3) was obtained and structurally characterized by X-ray diffraction and infrared analysis. The compound crystallizes in the trigonal system, space group R3, and is described in a hexagonal cell with a=17.739(1), c=9.531(1) and Z=3. Cysteine is coordinated to Pt(II) through the nitrogen and sulphur atoms. Each cysteine sulphur bridges between two metal atoms. A square planar coordination sphere of platinum is completed by a chlorine atom. The complex is soluble in dimethyl sulfoxide.

Uso de indicadores para estimar fluxos de matéria seca ileal em eqüinos fistulados

This experiment was carried out with six half-bred Bretao-Campolinacolts with ileum fistulated to evaluate the difference in the ileum dry matter flow estimated by chromic oxide, cellulose, NDF, lignin and fecal lignin through the collection of ileum samples digesta at 28 h intervals, totalizing six samples per animal, starting at 10:00 a.m. The animals were fed ad libitum with the following diets: R1: clephantgrass, R2: elephantgrass plus ground corn, and R3: elephantgrass plus ground corn plus soybean meal. The data was statistically described, based on the coefficient of variation. The values of dry matter prececal digestion coefficients were, respectively, for diets 1, 2 and 3, at six schedules, for cellulose (-16.4; 21.4 and 6.6%), NDF(-34.7; 28.8 and -12.8%), to lignin (-51.5; -5.1 and -25.7%), in two schedules for cellulose (-13.4; 25.6 and 21.5%), fecal lignin (-37.1, 16.6 and -6.4%) and chromic oxide (-219.3, 36.4 and 9.5%). The coefficients of variation were, respectively, for the diets i, 2 and 3, at six schedules, for cellulose (148.3; 107.5 and 522.7%), NDF (95.4; 80.9 and 314.3%), lignin (210.2; 752.3 and 209.6%), at two schedules for cellulose(148.5; 80.7 and 70.0%), fecal lignin, (262.4; 177.9 and 723.5%) and chromic oxide (141.1; 158.9 and 473.4%). In diet i, the ileum dry matter now were over estimated for all markers, showing that chosen collection lime to estimate the flows were not adequate. Based on the coefficient of variation of the diets 2 and 3, the cellulose at two schedules was the most marker indicator to determine the ileum dry matter flow.

Properties and in vivo investigation of nanocrystalline hydroxyapatite obtained by mechanical alloying

Mechanical alloying has been used successfully to produce nanocrystalline powders of hydroxyapatite (HA) using three different procedures. The milled HA was studied by X-ray diffraction, Infrared, Raman scattering spectroscopy and Scanning Electron Microscopy (SEM). We obtained HA with different degrees of crystallinity and time of milling. The grain size analysis through SEM and XRD shows particles with dimensions of 36.9, 14.3 and 35.5 nm (for (R1), (R2) and (R3), respectively) forming bigger units with dimensions given by 117.2, 110.8 and 154.4 nm (for (R1), (R2) and (R3), respectively). The Energy-Dispersive Spectroscopy (EDS) analysis showed that an atomic ratio of Ca/P= 1.67, 1.83 and 1.50 for reactions (R1), (R2) and (R3), respectively. These results suggest that the R1 nanocrystalline ceramic is closer to the expected value for the ratio Ca/P for hydroxyapatite, which is 513 congruent to 1.67. The bioactivity analysis shows that all the samples implanted into the rabbits can be considered biocompatible, since they had been considered not toxic, bad not caused inflammation and reject on the part of the organisms of the animals, during the period of implantation. The samples implanted in rabbits had presented new osseous tissue formation with the presence of osteoblasts cells. (C) 2004 Elsevier B.V. All rights reserved.

Titanium(IV)-EDTA complex - Kinetics of thermal decomposition by non-isothermal procedures

This work aims the evaluation of the kinetic triplets corresponding to the two successive steps of thermal decomposition of Ti(IV)-ethylenediaminetetraacetate complex. Applying the isoconversional Wall-Flynn-Ozawa method on the DSC curves, average activation energy: E=172.4 +/- 9.7 and 205.3 +/- 12.8 kJ mol(-1), and pre-exponential factor: logA = 16.38 +/- 0.84 and 18.96 +/- 1.21 min(-1) at 95% confidence interval could be obtained, regarding the partial formation of anhydride and subsequent thermal decomposition of uncoordinated carboxylate groups, respectively.From E and logA values, Dollimore and Malek methods could be applied suggesting PT (Prout-Tompkins) and R3 (contracting volume) as the kinetic model to the partial formation of anhydride and thermal decomposition of the carboxylate groups, respectively.

Tin(II)-EDTA complex: kinetic of thermal decomposition by non-isothermal procedures

Tin on the oxide form, alone or doped with others metals, has been extensively used as gas sensor, thus, this work reports on the preparation and kinetic parameters regarding the thermal decomposition of Sn(II)-ethylenediaminetetraacetate as precursor to SnO2. Thus, the acquaintance with the kinetic model regarding the thermal decomposition of the tin complex may leave the door open to foresee, whether it is possible to get thin film of SnO2 using Sn(II)-EDTA as precursor besides the influence of dopants added.The Sn(II)-EDTA soluble complex was prepared in aqueous medium by adding of tin(II) chloride acid solution to equimolar amount of ammonium salt from EDTA under N-2 atmosphere and temperature of 50degreesC arising the pH similar to 4. The compound was crystallized in ethanol at low-temperature and filtered to eliminate the chloride ions, obtaining the heptacoordinated chelate with the composition H2SnH2O(CH2N(CH2COO)(2))(2).0.5H(2)O.Results from TG, DTG and DSC curves under inert and oxidizing atmospheres indicate the presence of water coordinated to the metal and that the ethylenediamine fraction is thermally more stable than carboxylate groups. The final residue from thermal decomposition was the SnO2 characterized by X-ray as a tetragonal rutile phase.Applying the isoconversional Wall-Flynn-Ozawa method on the DSC curves, average activation energy: E-a = 183.7 +/- 12.7 and 218.9 +/- 2.1 kJ mol(-1), and pre-exponential factor: log A = 18.85 +/- 0.27 and 19.10 +/- 0.27 min(-1), at 95% confidence level, could be obtained, regarding the loss of coordinated water and thermal decomposition of the carboxylate groups, respectively. The E-a and logA also could be obtained applying isoconventional Wall-Flynn method on the TG curves.From E-a and log A values, Dollimore and Malek procedures could be applied suggesting R3 (contracting volume) and SB (two-parameter model) as the kinetic model to the loss of coordinated water (177-244degreesC) and thermal decomposition of the carboxylate groups (283-315degreesC), respectively. Simulated and experimental normalized DTG and DSC curves besides analysis of residuals check these kinetic models. (C) 2003 Elsevier B.V. All rights reserved.

Evaluation of dental pulp repair using low level laser therapy (688 nm and 785 nm) morphologic study in capuchin monkeys

The aim of this study was to evaluate the hypothesis that low-level laser therapy (LLLT) 688 nm and 785 nm accelerate dentin barrier formation and repair process after traumatic pulp exposure. The sample consisted of 45 premolars of capuchin monkeys (Cebus apella) with pulp exposure Class V cavities. All premolars were treated with calcium hydroxide (Ca(OH)(2)), divided in groups of 15 teeth each, and analyzed on 7(th), 25(th), and 60(th) day. Group GI - only Ca(OH)(2), GIF- laser 688 nm, and GIII - laser 785 nm. Laser beam was used in single and punctual dose with the parameters: continuous, 688 nm and 785 nm wavelength, tip's area of 0.00785 cm(2), power 50 mW, application time 20 s, dose 255 J/cm(2), energy 2 J. Teeth were capped with Ca(OH)(2), Ca(OH)(2) cement and restored with amalgam. All groups presented pulp repair. on 25(th) day the thickness of the formed dentin barrier was different between the groups GI and GII (p < 0.05) and between groups GI and GIII (p < 0.01). on 60(th) day there was difference between GI and GIII (p < 0.01). It may be concluded that, LLLT 688 nm and 785 nm accelerated dentin barrier formation and consequently pulp repair process, with best results using infrared laser 785 nm. (c) 2009 by Astro Ltd. Published exclusively by WLLEY-VCH Verlag GmbH & Co. KGaA

Detection of Sourgrass (Digitaria insularis) Biotypes Resistant to Glyphosate in Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Higgs- and Goldstone-boson-mediated long range forces

In certain mild extensions of the standard model, spin-independent long range forces can arise by exchange of two very light pseudoscalar spin-0 bosons. In particular, we have in mind models in which these bosons do not have direct tree level couplings to ordinary fermions. Using the dispersion theoretical method, we find a 1/r3 behavior of the potential for the exchange of very light pseudoscalars and a 1/r7 dependence if the pseudoscalars are true massless Goldstone bosons. ©1999 The American Physical Society.

Uso da fitossociologia na avaliação da efetividade da restauração florestal em uma várzea degradada do rio Mogi Cuaçu, SP

This study objective was to evaluate the effective revegetation in a Mogi Guaçu River degraded floodplain area, located at Luiz Antonio municipality (21° 31' S e 47° 55' W), São Paulo State, Brazil. Two native riparian forest remnants (RIP1 and RIP2) and three 10-year-old reforested areas, planted of native species (R1, R2 and R3), were analyzed by using phytosociological describers of the arboreal stratum (trees with DBH ≥ 5 cm) as indicators. The arboreal stratum inventory was accomplished by 180 plots (10 × 10 m each), 60 representing every native forest and 20 for every reforested area. A total of 60 arboreal species was recorded, only six species (Cecropia hololeuca, Crotón urucurana, Genipa americana, Inga striata, Nectandra megapotamica e Peltophorum dubium) occurring in all the five studied areas. Seventeen species were common to both native forests, and nine species were recorded in all the reforested areas. Sebastlania commersonlana and Guarea macrophyllawere recorded in the native forests (RlP1 and RIP2), and Cecropia hololeuca, Croton urucurana and Inga striata occurring in all the reforested areas, were the species that best characterize the physiognomy of local diversity and were the most important among the studied species. The results showed that the rehabilitation of the areas made by the reforestation created conditions to implant forests with similar structures of the adjacent natural remainders. The reforestation with native species performed in the degraded floodplain of Mogi Guaçu River, initially with the predomination of invasive grasses, has been effective at the first stage of the ecological restoration process. The reforestation is making possible the natural regeneration of species from the adjacent remnants, what indicates that the similarity between planted forests and the native ones are rising through the time. The phytosociology, accomplished ten years after the planting date, is adequate to evaluate the effectiveness of the reforestation during the restoration process of degradated areas in the Mogi Guaçu floodplain.

Pneumonias

Pneumonia is an infectious disease with great morbidity and mortality worldwide. According to the current guidelines recommendations the authors reviewed the treatment of community-acquired pneumonia (CAP) and hospital-acquired pneumonia (HAP). In this paper will be presented data about etiology, clinics and diagnostic tools. © Copyright Moreira Jr. Editora.

Flexibility and torsional resistance of three nickel-titanium retreatment instrument systems

Aim To assess the dimensional characteristics, flexibility and torsional behaviour of nickel-titanium retreatment instruments. Methodology Using image analysis software and high-resolution digital images, the instrument length, tip angle, diameter at 3mm from the tip and the distance between the blades (pitch length) of the following eight instruments were measured (n=12 for each measurement parameter): the ProTaper Universal retreatment (PTU-R) D1, D2 and D3 instruments; the R-Endo R1, R2 and R3 retreatment instruments; and the Mtwo retreatment (Mtwo-R) sizes 25 and 15 retreatment instruments. Maximum torque and the angular deflection at fracture as well as the bending moment at 45° were measured (n=12) according to the International Standards Organisation (ISO) specification number 3630-1. Data were analysed using the analysis of variance (α=0.05). Results The length of the active part of the instruments was found to vary according to the depth of the canal into which they were designed to reach. The pitch length also increased along the active length. The PTU-R D1 and the Mtwo-R instruments had active tips. Measurements of the bending moment at 45° revealed that the Mtwo-R 15 instrument was the most flexible, whereas the PTU-R D1 was the least flexible. The maximum torque tended to increase as the instrument diameter at 3mm from the tip increased, whereas the angular deflection at fracture varied in the opposite direction. Conclusions The geometrical characteristics of the retreatment instruments and their flexibility and torsion behaviour were consistent with their intended clinical application. © 2011 International Endodontic Journal.

Compressive strength of dental composites photo-activated with different light tips

The aim of this study was to evaluate the compressive strength of microhybrid (Filtek™ Z250) and nanofilled (Filtek™ Supreme XT) composite resins photo-activated with two different light guide tips, fiber optic and polymer, coupled with one LED. The power density was 653 mW cm -2 when using the fiber optic light tip and 596 mW cm-2 with the polymer. After storage in distilled water at 37 ± 2 °C for seven days, the samples were subjected to mechanical testing of compressive strength in an EMIC universal mechanical testing machine with a load cell of 5 kN and speed of 0.5 mm min-1. The statistical analysis was performed using ANOVA with a confidence interval of 95% and Tamhane's test. The results showed that the mean values of compressive strength were not influenced by the different light tips (p > 0.05). However, a statistical difference was observed (p < 0.001) between the microhybrid composite resin photo-activated with the fiber optic light tip and the nanofilled composite resin. Based on these results, it can be concluded that microhybrid composite resin photo-activated with the fiber optic light tip showed better results than nanofilled, regardless of the tip used, and the type of the light tip did not influence the compressive strength of either composite. Thus, the presented results suggest that both the fiber optic and polymer light guide tips provide adequate compressive strength to be used to make restorations. However, the fiber optic light tip associated with microhybrid composite resin may be an interesting option for restorations mainly in posterior teeth. © 2013 Astro Ltd.