基于GIS的大兴安岭森林火险区划

以黑龙江省大兴安岭图强林业局育英林场和奋斗林场为研究区,以GIS技术为支撑,选取植被类型、海拔、坡度、坡向和离居住区远近作为主要林火影响因子,采用因子加权叠置法,对研究区森林火险情况进行了定量评价,将火险等级分为无、低、中、高和极高5类.结果表明,无、低、中、高和极高火险区分别占研究区的0.37%、0.63%、38.67%、58.63%和1.70%,符合正态分布;中及以上火险区占60.33%,说明研究区森林火灾管理任务仍相当繁重;森林火险等级的地域分异明显,中部高四周低,在不同林火影响因子上的分异十分明显;火险等级与1987年的火烧强度具有较强的一致性,说明火险区划结果具有较高的可靠性,可为林业部门进行森林火灾管理提供有价值的参考.

黄土丘陵区不同土地利用方式土壤团粒结构分形特征

土壤团粒、水稳性团粒和微团粒状况是影响土壤结构和性质的重要因素。运用分形理论研究黄土丘陵区纸坊沟流域7种不同土地利用方式土壤团粒结构的分形特征。结果表明:表层土壤团粒的分形维数在1.641~2.114之间,其大小顺序为人工草地>果园>坡耕地>乔木林地>灌丛>天然草地>人工梯田。土壤水稳性团粒的分形维数在1.774~2.384之间,其变化顺序为果园>乔木林地>人工草地>坡耕地>天然草地>人工梯田>灌丛,二者均表现出≥0.25 mm粒级土壤团粒含量越低,分形维数越高的规律;分形维数与≥5 mm、5~2 mm和≥0.25 mm粒级的土壤团粒、水稳性团粒呈极显著负相关(P<0.01),与<0.25 mm粒级的呈极显著正相关(P<0.01);结合团粒结构体破坏率可知,灌丛土壤结构与稳定性最好,其次为天然草地,人工草地最差;表层土壤微团粒结构分形维数在2.360~2.487之间,大小顺序为天然草地>乔木林地>坡耕地>人工梯田>人工草地>果园>灌丛,灌丛有助于促进土壤微结构形成,分形维数与0.25~0.05 mm和>0.001 mm粒级土壤微团粒含量呈极显著负相关(P<0.01),与<0.001 mm粒级土壤微团粒含量呈极...

偏最小二乘回归方法在土地利用结构研究中的应用

针对当前LUCC研究中存在的数据间多重相关性和样本量不足的问题,论文将一种新型的多元统计数据分析方法———偏最小二乘回归引入到研究中。该方法可以有效地克服上述缺陷,并能实现多种数据分析方法的综合应用。为检验方法的功能及实用性,论文以苏锡常地区为例,对区域的土地利用结构及其影响因子进行了定量分析。结果表明,偏最小二乘回归是进行土地利用结构研究的一种十分有效的工具,在地学领域有广阔的应用前景。

Vulcanization of polybutadiene latex induced by Co-60 gamma radiation

Polybutadiene latex (PBL) vulcanization induced by Co-60 radiation and the influence of dose on crosslinking were investigated. Morphology and particle size distribution were examined by AFM and a particle size analyzer. The casting films were characterized for their swelling and mechanical properties as a function of dose.

快速凝固 Ti-Zr-Ni 合金的电化学贮氢性能

采用铜辊快速凝固方法制备了Ti45Zr30Ni25和Ti50Zr25Ni25合金,并对合金作为镍-氢二次电池负极的动力学和电化学性能进行了研究。结果表明,Ti45Zr30Ni25为非晶相合金,Ti50Zr25Ni25合金由准晶相和非晶相组成。两合金电极的最大放电容量分别为129和132mAh/g。在240mA/g电流密度下,高倍率放电性能(HRD)分别为62.7%和63.3%。合金电极的交换电流密度分别为205.1和375.6mA/g,氢在合金中的扩散系数分别为5.4×10-11和5.8×10-11cm2·s-1

Synthesis and properties of soluble poly[bis(benzimidazobenzisoquinolinones)] based on novel aromatic tetraamine monomers

Four aromatic tetraamine monomers possessing flexible ether linkages were successfully synthesized by nucleophilic aromatic substitution of hydroquinone, 4,4'-dihydroxybiphenyl, 2,2'-bis(4-hydroxyphenyl)propane, and 2,7-dihydroxynaphthalene with 5-chloro-2-nitroaniline, followed by reduction, respectively. With these monomers, a new class of soluble poly[ bis(benzimidazobenzisoquinolinones)] was prepared by a one-step, high-temperature solution polycondensation. The resulting polymers were completely soluble in phenolic solvents and had high inherent viscosities ranging from 1.2 to 1.5 g dL(-1). These polymers had glass transition temperatures in the range of 427-449 degrees C. Thermogravimetric analysis showed that all polymers were thermally stable, with 5% weight loss recorded above 510 degrees C in nitrogen.

Microstructures, mechanical properties and corrosion behavior of high-pressure die-cast Mg-4Al-0.4Mn-xPr (x=1, 2, 4, 6) alloys

Mg-4Al-0.4Mn-xPr (x = 1, 2, 4 and 6 wt.%) magnesium alloys were prepared successfully by the high-pressure die-casting technique. The microstructures, mechanical properties, corrosion behavior as well as strengthening mechanism were investigated. The die-cast alloys were mainly composed of small equiaxed dendrites and the matrix. The fine rigid skin region was related to the high cooling rate and the aggregation of alloying elements, such as Pr. With the Pr content increasing, the alpha-Mg grain sizes were reduced gradually and the amounts of the Al2Pr phase and All, Pr-3 phase which mainly concentrated along the grain boundaries were increased and the relative volume ratio of above two phases was changed. Considering the performance-price ratio, the Pr content added around 4 wt.% was suitable to obtain the optimal mechanical properties which can keep well until 200 degrees C as well as good corrosion resistance. The outstanding mechanical properties were mainly attributed to the rigid casting surface layer, grain refinement, grain boundary strengthening obtained by an amount of precipitates as well as solid solution strengthening.

Hydrothermal synthesis of Fe and Mn doped SnO2 and its magnetic structures

The dilute magnetic semiconductor of Sn1-x-yMnxFeyO2 (0 <= x <= 0.10, 0 <= y <= 0.10) Were syhthesized with the hydrothermal method using SnCl4, Mn(CH3COO)(2) center dot 4H(2)O and FeCl3 center dot 6H(2)O as the raw materials. The structure, morphologies and magnetic properties of the sample were characterized via X-ray powder diffractometer(XRD), transmission electron microscopy(TEM), Raman spectrum and superconducting and quantum interference device(SQUIT), and Mossbeaur spectrum. No secondary phase was found in the XRD spectrum. The morphology of the samples is affected by the kind or the mount of transition metal. The local vibrating model-of Mn Positioned SnO2 sites was found in Raman spectrum. The measured magnetic results indicate that when x = 0.10, y = 0, the sample exhibits strong magnetization in low-temperature (5 K), but the magnetization decrease rapidly at room. temperature; In contrast, when x = 0, y = 0.1, the sample's magnetization and coercivity are both small, but being temperature independent. Mossbeaur spectra indicates that part of the Fe is ferromagnetic coupled, and the simulating results indicate that the ferromagnetic character is intrinsic.

Electrochemiluminescence detection with integrated indium tin oxide electrode on electrophoretic microchip for direct bioanalysis of lincomycin in the urine

In this article, an antibiotic, lincomycin was determined in the urine sample by microchip capillary electrophoresis (CE) with integrated indium tin oxide (ITO) working electrode based on electrochemiluminescence (ECL) detection. This microchip CE-ECL system can be used for the rapid analysis of lincomycin within 40 s. Under the optimized conditions, the linear range was obtained from 5 to 100 muM with correlation coefficient of 0.998. The limit of detection (LOD) of 3.1 muM was obtained for lincomycin in the standard solution. We also applied this method to analyzing lincomycin in the urine matrix. The limit of detection of 9.0 muM was obtained. This method can determine lincomycin in the urine sample without pretreatment, which demonstrated that it is a promising method of detection of lincomycin in clinical and pharmaceutical area.

Two new Cu-II coordination polymers: Studies of topological networks and water clusters

Two new Cull coordination polymers, namely [Cu-2(BDC)(2)(L)(4)(H2O)(2)]center dot 14H(2)O (1) and [Cu-1.5(BTC)(L)(1.5)(H2O)(0.5)]center dot 2H(2)O (2), where L = 1,1'-(1,4-butanediyl)bis(imidazole), BDC = 1,4-benzene dicarboxylate, and BTC = 1,3,5-benzenetricarboxylate, have been synthesized at room temperature. Complex 1 exhibits an unusual, square-planar, four-connected 2D (2)(6)4 net, which has been predicated by Wells. Interestingly, three types of water clusters, namely (H2O)(6), (H2O)(8), and (H2O)(10), are observed in the hydrogen-bonded layers constructed by the BDC ligands and water molecules. The BTC anion in compound 2 is coordinated to the Cu" cation as tetradentate ligand to form a (6(6))(2)(4(2)6(4)8(4))(2)(6(4)810) net containing three kinds of nonequivalent points, Thermogravimetric analyses (TGA) and IR spectra for 1 and 2 are also discussed in detail.

肌苷在玻碳电极上的伏安法研究

应用线性扫描伏安法（LSV），微分脉冲伏安法（DPV）和循环伏安法（CV）对肌苷在玻碳电极（GCE）上的阳级伏安行为进行了研究，发现在0．1mol/L磷酸氢二纳溶液中，于1．42V（vs.Ag／AgCl）左右产生一个阳极氧化峰，峰电流与肌苷浓度在5×10-4～8×10-2g/L范围内呈线性关系，峰电位随溶液pH值增加而降低。肌苷在与次黄嘌呤、黄嘌呤、尿酸共存时，可得4个分辨良好的阳极氧化峰，它们的峰电位分别为1．42V、1．07V、0．72V和0．26V。用本法不需分离直接测定了药物针剂和加标尿样。实验结果表明肌苷的电极反应为扩散控制不可逆过程。

Study of energy transfer between rare earth ions in CaS host by photoluminescence spectra

When CaS:Sm3+, Eu2+ is excited at 476.5 nm (Ar+), the emission spectra taken at room temperature and at 77 K are different, indicating that there are two competitive energy transfer processes-Sm3+ --> Eu2+ and Eu2+ --> Sm3+ with phonon participation. So, the luminescence intensity of Sm3+ increases first, and then decreases as the concentration of Eu2+ is increasing. (C) 2001 Elsevier Science Ltd. All rights reserved.