Techniques to produce 100 percent male tilapia

A discussion is presented on endocrine sex reversal and chromosome manipulation techniques for producing 1005 male tilapia. Details are given of methods for the administration of steroids and the induction of ploidy.

An investigation of survey technologies and modeling techniques for improving deepwater surveys of nonindigenous species in the Northwestern Hawaiian Islands

Nonindigenous species (NIS) are a major threat to marine ecosystems, with possible dramatic effects on biodiversity, biological productivity, habitat structure and fisheries. The Papahānaumokuākea Marine National Monument (PMNM) has taken active steps to mitigate the threats of NIS in Northwestern Hawaiian Islands (NWHI). Of particular concern are the 13 NIS already detected in NWHI and two invasive species found among the main Hawaiian Islands, snowflake coral (Carijoa riseii) and a red alga (Hypnea musciformis). Much of the information regarding NIS in NWHI has been collected or informed by surveys using conventional SCUBA or fishing gear. These technologies have significant drawbacks. SCUBA is generally constrained to depths shallower than 40 m and several NIS of concern have been detected well below this limit (e.g., L. kasmira – 256 m) and fishing gear is highly selective. Consequently, not all habitats or species can be properly represented. Effective management of NIS requires knowledge of their spatial distribution and abundance over their entire range. Surveys which provide this requisite information can be expensive, especially in the marine environment and even more so in deepwater. Technologies which minimize costs, increase the probability of detection and are capable of satisfying multiple objectives simultaneously are desired. This report examines survey technologies, with a focus on towed camera systems (TCSs), and modeling techniques which can increase NIS detection and sampling efficiency in deepwater habitats of NWHI; thus filling a critical data gap in present datasets. A pilot study conducted in 2008 at French Frigate Shoals and Brooks Banks was used to investigate the application of TCSs for surveying NIS in habitats deeper than 40 m. Cost and data quality were assessed. Over 100 hours of video was collected, in which 124 sightings of NIS were made among benthic habitats from 20 to 250 m. Most sightings were of a single cosmopolitan species, Lutjanus kasmira, but Cephalopholis argus, and Lutjanus fulvus, were also detected. The data expand the spatial distributions of observed NIS into deepwater habitats, identify algal plain as an important habitat and complement existing data collected using SCUBA and fishing gear. The technology’s principal drawback was its inability to identify organisms of particular concern, such as Carijoa riseii and Hypnea musciformis due to inadequate camera resolution and inability to thoroughly inspect sites. To solve this issue we recommend incorporating high-resolution cameras into TCSs, or using alternative technologies, such as technical SCUBA diving or remotely operated vehicles, in place of TCSs. We compared several different survey technologies by cost and their ability to detect NIS and these results are summarized in Table 3.

Production of triploid African catfish, Clarias gariepinus (Burchell), using chromosome manipulation techniques

An experiment was conducted to induce triploidy in African catfish, Clarias gariepinus, using heat shock and cold shock techniques. Cold shock at a temperature of 0± 1°C and 5±1°C for a duration of 15, 30, 45 and 60 min and heat shock at a temperature of 40±0.5°C and 41 ±OS C for a duration of 1, 2 and 3 min was given to induce triploidy 5 min after fertilization. Maximum percentage of triploids (91.4%) were obtained in the heat shock at a temperature of 40±0SC for a duration of 1 min whereas cold shock at 0± 1 C for a duration of 60 min yielded 90% of triploids. Chromosome analysis revealed that diploids have 54 chromosomes and triploids have 81 chromosomes. The erythrocyte measurements of the minor axis and major axis were 1.17 times larger in treated fish than in controls. The growth studies showed that the growth rate was not significantly affected in triploids.

Development of artificial breeding techniques for long-whiskered catfish, Sperata aor and giant river catfish, Sperata seenghala of Bangladesh

Sperata aor and S. seenghala are the two important native catfishes of Bangladesh but commercial farming of these species is not possible due to lack of naturally collected or artificially produced seeds for stocking. Attempts were made to develop techniques for seed production by artificial breeding and nursery-rearing of fries of these catfishes. A total of 60 S. seenghala (750-1,500 g) and 10 S. aor (600-1,000 g) broods were collected from the Brahmaputra river-basin and floodplains in Mymensingh region four months prior to their breeding season. The collected brood fishes were reared in separate earthen ponds with supplementary feeds comprising of rice bran (40%), mustard oil cake (29%), fish meal (30%) and vitamin-premix (1 %). Three experiments were conducted to optimize the hormone dose. A total of nine S. seenghala females weighing from 750 to 1,500 g were given an initial and resolving dose of 12-20 and 16-24 mg PG/kg body weight, respectively. The males weighing from 650-950 g were administered a single dose of 18-26 mg PG/kg body weight at the time of the time of administering the resolving dose to the females. The females ovulated partially and the eggs were examined under a compound microscope, but most of them were found to be less ripe or damaged. Collection of milt by stripping the males was not successful. The testes were taken out and sperm were observed to be non-motile and less developed. In view of stimulating natural propagation of S. seenghala, artificial holes (nests) were constructed in the pond bottom. Each hole was 0.7 m in diameter and 0.3 m in depth. A total of 10 holes were made and then 10 pairs of S. seenghala breeders (800-1,200 g) were stocked in the pond. In mid February, 3,000 fry of S. seenghala with a mean length of 4.60 cm and weight of 0.36 g were collected by repeated netting followed by drying of the pond. The fry were then stocked in a nursery pond and fed with commercial feed (SABINCO starter-1). The average length and weight of the fingerlings were 9.01 cm and 3.95 g, respectively and the estimated survival was 60% after two months of rearing. S. aor did not respond to natural spawning. Further study is essential to develop techniques for their successful artificial and natural breeding.

Seed production and culture techniques of Genetically Improved Farmed Tilapia (GIFT) in brackishwater environment

Effects of different levels of salinity on survival, growth and gonadal development of Genetically Improved Farmed Tilapia (GIFT) were studied under laboratory conditions in glass aquarium, for a period of ten weeks. The initial individual size of the GIFT was 20.23±4.45 and the salinity levels tested were 0, 5, 10, 15 and 20 ppt. The highest survival of 87.5% was found in 0 ppt and the lowest 60.5% in 20 ppt. Though the survival decreased progressively with increased salinity, there were no significant differences (P>0.05) among 0, 5, and 10 ppt. Similar to what has been observed in survival, the specific growth rate (SGR %/day) also decreased as of 1.30, 1.24, 1.08, 0.90 and 0.71, respectively, with the increased salinity of 0, 5, 10, 15 and 20 ppt. The gonadal development was highest in 0 ppt with a GSI value of 3.75 and lowest of 2.01 in 20 ppt. In the second experiment, gonadal development and seed production performance of GIFT in brackishwater condition were investigated for a period of three months. Each of the three fine meshed hapas of 20 square meters made from nylon net was placed in a freshwater (0 ppt) and in a brackish water (10-15 ppt) pond of the Brackishwater Station (BS). GIFT of 65 g average weight from a single cohort were stocked into three hapas at a rate of 2 per m. The male vs female ratio was 1:3. The development of gonad was faster with the higher gonadosomatic index (GSI %) of 3.85 % in freshwater condition than that of 2.73 % in brackish water. Within three months of the study period, a total of 70,510 and 44,250 GIFT fry were produced respectively, in freshwater and brackishwater conditions. Finally under third experiment, a participatory on-farm trial was carried out to evaluate the production performance of GIFT in monoculture and in polyculture with silver barb in coastal freshwater pond conditions. Nine ponds were selected for three treatment combinations of GIFT monoculture (T1), GIFT and silver barb polyculture (T2), and silver barb monoculture (T3). The ponds have been stocked in April, 05 at a density of 25,000 fry per ha. Fishes were fed with rice bran at the rate of 6% bw per day. In one month culture period, GIFT attained an average weight of 16.27 g in monoculture and 17.23 g in polyculture, against an average stocking weight of 0.37 g. Silver barb reached an average weight of 16.62 g in polyculture with GIFT and 10.01 g in monoculture, against an average stocking weight of 3.79 g.

Village level processing techniques

The agar-bearing seaweeds Gracilaria and Gelidium grow abundantly in the Asia-Pacific region. Production and post-harvest techniques and methods for processing Gracilaria to produce agar suitable for local market is necessary to increase the meager income of coastal dwellers. A flow diagram of a village level agar production is provided. A guide is also given for the quality of dried seaweeds, which are divided into 3 classes.

Farming techniques for seaweeds

Details are given of farming methods developed by the SEAFDEC Aquaculture Department for 3 different seaweeds: 1) Bottom line culture method for Kappaphycus; 2) Pond culture of Gracilaria; and, 3) Gracilariopsis bailinae, the new seaweed on the block.

1-3 Piezocomposite design optimised for high frequency kerfless transducer arrays

Piezocomposites that can operate at frequencies above 30 MHz without spurious modes are required in order to develop sufficiently sensitive high frequency arrays for high resolution imaging. However, scaling down of conventional piezocomposite fabrication techniques becomes increasingly difficult as dimensions decrease with increasing frequency. The approach presented here is to use micro-moulded 1-3 piezocomposites and a distribution of piezoelectric segment size and separation. Innovative approaches to composite pattern design, based on a randomized spatial distribution, are presented. Micro-moulding techniques are shown to be suitable for fabricating composites with dimensions required for high frequency composites. Randomized piezocomposite patterns are modeled and are shown to suppress spurious modes.

Toll-like receptor 3 regulates Mx expression in rare minnow Gobiocypris rarus after viral infection

Toll-like receptor 3 (TLR3) plays a key role in activating immune responses during viral infection. To study the genes involved in the regulatory function of TLR3 in the rare minnow Gobiocypris rarus after viral infection, a full-length cDNA of TLR3 (GrTLR3) with a splice variant (GrTLR3s) was identified by homologous cloning and RACE techniques. The antiviral effector molecule Mx gene was cloned and partially sequenced. The mRNA expression levels of GrTLR3, GrTLR3s, and Mx were studied in different tissues before and after virus infection by real-time quantitative RT-PCR. The transcripts of all three genes in liver were significantly increased following GCRV infection (P<0.05). The mRNA levels in liver were upregulated at 24 h post-injection for GrTLR3 and GrTLR3s, and at 12 h for Mx. The upregulated expression levels were several folds for GrTLR3s, tens of folds for GrTLR3, and hundreds of folds for Mx. By semi-quantitative RT-PCR, GrTLR3 and Mx expressed at all the developmental stages, whereas GrTLR3s could only be detected at later developmental stages. Using RNAi and transgenic techniques, GrTLR3 mediated Mx expression but GrTLR3s did not. The time-dependent upregulation of receptor and effector, and the Mx over-expression dependent on TLR3, indicated that GrTLR3 regulated Mx expression in viral infection through a configuration change in rare minnow, and its splice variant did not contribute to the process.

Effects of techniques of implanting nitrogen into buried oxide on the characteristics of partially depleted SOIPMOSFET

Effects of techniques of implanting nitrogen into buried oxide on the characteristics of the partially depleted silicon-on-insulator (SOI) p-channel metal-oxide-semiconductor field-effect transistors (PMOSFETs) have been studied with three different nitrogen implantation doses, 8 x 10(15), 2 x 10(16), and 1 x 10(17) cm(-2). The experimental results show that this technology can affect the threshold voltage, channel hole mobility and output characteristics of the partially depleted SOI PMOSFETs fabricated with the given material and process. For each type of the partially depleted SOI PMOSFET with nitrided buried oxide, the absolute value of the average threshold voltage increases due to the nitrogen implantation. At the same time, the average channel hole mobility decreases because of the nitrogen implantation. In particular, with the high nitrogen implantation doses, the output characteristic curves of the tested transistors present a distinct kink effect, which normally exists in the characteristic output curves of only partially depleted SOI NMOSFETs.