Risk analysis for UAV safe operations: a rationalization for an agricultural environment

The road to the automation of the agricultural processes passes through the safe operation of the autonomous vehicles. This requirement is a fact in ground mobile units, but it still has not well defined for the aerial robots (UAVs) mainly because the normative and legislation are quite diffuse or even inexistent. Therefore, to define a common and global policy is the challenge to tackle. This characterization has to be addressed from the field experience. Accordingly, this paper presents the work done in this direction, based on the analysis of the most common sources of hazards when using UAV's for agricultural tasks. The work, based on the ISO 31000 normative, has been carried out by applying a three-step structure that integrates the identification, assessment and reduction procedures. The present paper exposes how this method has been applied to analyze previous accidents and malfunctions during UAV operations in order to obtain real failure causes. It has allowed highlighting common risks and hazardous sources and proposing specific guards and safety measures for the agricultural context.

Application of self-organizing techniques for the distribution of heterogeneous multi-tasks in multi-robot systems

This paper focuses on the general problem of coordinating of multi-robot systems, more specifically, it addresses the self-election of heterogeneous and specialized tasks by autonomous robots. In this regard, it has proposed experimenting with two different techniques based chiefly on selforganization and emergence biologically inspired, by applying response threshold models as well as ant colony optimization. Under this approach it can speak of multi-tasks selection instead of multi-tasks allocation, that means, as the agents or robots select the tasks instead of being assigned a task by a central controller. The key element in these algorithms is the estimation of the stimuli and the adaptive update of the thresholds. This means that each robot performs this estimate locally depending on the load or the number of pending tasks to be performed. It has evaluated the robustness of the algorithms, perturbing the number of pending loads to simulate the robot’s error in estimating the real number of pending tasks and also the dynamic generation of loads through time. The paper ends with a critical discussion of experimental results.

A vision-based strategy for autonomous aerial refueling tasks

Autonomous aerial refueling is a key enabling technology for both manned and unmanned aircraft where extended flight duration or range are required. The results presented within this paper offer one potential vision-based sensing solution, together with a unique test environment. A hierarchical visual tracking algorithm based on direct methods is proposed and developed for the purposes of tracking a drogue during the capture stage of autonomous aerial refueling, and of estimating its 3D position. Intended to be applied in real time to a video stream from a single monocular camera mounted on the receiver aircraft, the algorithm is shown to be highly robust, and capable of tracking large, rapid drogue motions within the frame of reference. The proposed strategy has been tested using a complex robotic testbed and with actual flight hardware consisting of a full size probe and drogue. Results show that the vision tracking algorithm can detect and track the drogue at real-time frame rates of more than thirty frames per second, obtaining a robust position estimation even with strong motions and multiple occlusions of the drogue.

Piezoelectric sensors system for impact detecting

This work describes an acoustic system that allows the automatic detection and location of mechanical impacts on metallic based structures, which is suitable in robotics and industrial applications. The system is based on the time delays of propagation of the acoustic waves along the metallic based structure and it determines the instant and the position when and were the impact has been produced by piezoelectric sensors and an electronic-computerized system. We have obtained that for distance impact of 40 cm and 50 cm the time delay is 2 s and 72 s respectively.

Plataformas de desarrollo de WSAN y MiddleWare para despliegue

Son muchos los dominios de aplicación que han surgido en los últimos años con motivo de los avances tecnológicos. Algunos como eHealth, Smart Building o Smart Grid están teniendo una gran aceptación por parte de empresas que incrementan sus inversiones en este tipo de campos. Las redes inalámbricas de sensores y actuadores juegan un papel fundamental en el desarrollo de este tipo de aplicaciones. A través de este tipo de redes inalámbricas es posible monitorizar y actuar sobre un entorno gracias a nodos sensores y actuadores de forma cómoda y sencilla. Las WSANs (Wireless Sensors and Actuators Networks) junto con la robótica y M2M (Machine-to-Machine) están forjando el camino hacia el Internet of Things (IoT), un futuro en el que todo esté conectado entre sí. Cada vez aparecen dispositivos más pequeños y autónomos, que junto con el crecimiento de las redes, propician la interconexión de “el todo”. Este Proyecto Fin de Carrera tiene como objetivo contribuir en este avance, desarrollando parcialmente una solución middleware que abstraiga al usuario de la complejidad del hardware, implementando ciertas funcionalidades ofrecidas por el middleware nSOM desarrollado por la UPM. Para conseguir este objetivo se realizará un estudio del Estado del Arte actual y una comparativa de las diferentes plataformas hardware involucradas en las Redes Inalámbricas de Sensores y Actuadores (Wireless Sensor-Actuator Networks). Este estudio tendrá como fin la elección de una de las plataformas hardware para su futuro uso en un despliegue parcial del mencionado middleware nSOM. Posteriormente, se diseñará e implementará un sistema para ejemplificar un caso de uso sobre dicha plataforma integrando la publicación de las características y servicios de cada nodo final y el envío de peticiones y la recepción de respuestas. Finalmente se obtendrá un conjunto de conclusiones a partir de los resultados obtenidos y se detallarán posibles líneas de trabajo. ABSTRACT. There are many applications domains that have arisen because of technological advances in recent years. Some as eHealth, Smart Building or Smart Grid are having a great acceptance by companies that increase their investments in such fields. Wireless sensors and actuators networks play a fundamental role in the development of such applications. By means of this kind of wireless network it is possible to monitor and act upon an environment with the assistance of sensors and actuators nodes, readily. The WSANs (Wireless Sensors and Actuators Networks) together with robotics and M2M (Machine-to-Machine) are forging the way towards the Internet of Things (IoT), a future in which all of them are connected among themselves. Smaller and more autonomous devices are appearing that, along with the growth of networks, foster the interconnection of ‘the whole’. This Degree Final Project aims to contribute to this breakthrough, developing partially a middleware solution that abstracts the user from the complexity of hardware, implementing certain functionalities offered by the nSOM middleware solution carried out by UPM. To achieve this objective a study of the current state of the art and a comparison of the different hardware platforms involved in the Wireless and Actuators Sensor Networks (Wireless Sensor-Actuator Networks) will be performed. This study will aim the election of one of the hardware platforms for its future use in a partial deployment of the mentioned middleware nSOM. Subsequently, a system will be designed and implemented to exemplify a use case on the platform mentioned before integrating the publication of the features and services of each end node and sending requests and receiving responses. Finally a set of conclusions from the results will be stated and possible lines of future works will be detailed.

A computational model of the anterior intraparietal area

The monkey anterior intraparietal area (AIP) encodes visual information about three-dimensional object shape that is used to shape the hand for grasping. In robotics a similar role has been played by modules that fit point cloud data to the superquadric family of shapes and its various extensions. We developed a model of shape tuning in AIP based on cosine tuning to superquadric parameters. However, the model did not fit the data well, and we also found that it was difficult to accurately reproduce these parameters using neural networks with the appropriate inputs (modelled on the caudal intraparietal area, CIP). The latter difficulty was related to the fact that there are large discontinuities in the superquadric parameters between very similar shapes. To address these limitations we adopted an alternative shape parameterization based on an Isomap nonlinear dimension reduction. The Isomap was built using gradients and curvatures of object surface depth. This alternative parameterization was low-dimensional (like superquadrics), but data-driven (similar to an alternative clustering approach that is also sometimes used in robotics) and lacked large discontinuities. Isomaps with 16 or more dimensions reproduced the AIP data fairly well. Moreover, we found that the Isomap parameters could be approximated from CIP-like input much more accurately than the superquadric parameters. We conclude that Isomaps, or perhaps alternative dimension reductions of CIP signals, provide a promising model of AIP tuning. We have now started to integrate our model with a robot hand, to explore the efficacy of Isomap shape reductions in grasp planning. Future work will consider dynamics of spike responses and integration with related visual and motor area models.

Integration of low-cost supervisory mobile robots in domestic wireless sensor networks

This paper presents a communication interface between supervisory low-cost mobile robots and domestic Wireless Sensor Network (WSN) based on the Zig Bee protocol from different manufacturers. The communication interface allows control and communication with other network devices using the same protocol. The robot can receive information from sensor devices (temperature, humidity, luminosity) and send commands to actuator devices (lights, shutters, thermostats) from different manufacturers. The architecture of the system, the interfaces and devices needed to establish the communication are described in the paper.

What is the optimal stitching orientation from an aerial survey perspective?

Mosaicing is a technique that allows obtaining a large high resolution image by stitching several images together. These base images are usually acquired from an elevated point of view. Until recently, low-altitude image acquisition has been performed typically by using using airplanes, as well as other manned platforms. However, mini unmanned aerial vehicles (MUAV) endowed with a camera have lately made this task more available for small for cicil applications, for example for small farmers in order to obtain accurate agronomic information about their crop fields. The stitching orientation, or the image acquisition orientation usually coincides with the aircraft heading assuming a downwards orientation of the camera. In this paper, the efect of the image orientation in the eficiency of the aerial coverage path planning is studied. Moreover, an algorithm to compute an optimal stitching orientation angle is proposed and results are numerically compared with classical approaches.

Laboratorios virtuales y docencia de la automática en la formación tecnológica de base

Recientemente, ha surgido un interés por aprender a programar, debido a las oportunidades profesionales que da este tipo de estudios universitarios. Es fácil de entender porque el número de trabajos para programadores e ingenieros informáticos está creciendo rápidamente. Por otro lado, un amplio grupo de psicólogos opinan que el pensamiento computacional es una destreza fundamental para cualquiera, no sólo para los ingenieros informáticos. Para leer, escribir y realizar operaciones aritméticas, deberíamos utilizar el pensamiento computacional y por lo tanto, para desarrollar todas las habilidades analíticas de los niños. Es necesario cambiar los requerimientos de las destrezas necesarias para trabajar, los nuevos trabajadores necesitarán destrezas más sofisticadas en ciencias, matemáticas, ingeniería y tecnología. Consecuentemente, los contenidos sobre Tecnología de la Información tales como electrónica, programación, robótica y control se incrementan en la educación tecnológica en enseñanza secundaria. El desarrollo y utilización de los Laboratorios Virtuales de Control y Robótica ayuda a alcanzar este objetivo. Nos vamos a centrar en control y robótica porque un proyecto de control y robótica incluye contenidos de otras tecnologías tales como electrónica, programación, … Se ha implementado un sitio web con Laboratorios Virtuales de Control y Robótica. En este trabajo, se muestran seis grupos de laboratorios virtuales para la enseñanza del control y la robótica a niveles preuniversitarios. Estos laboratorios virtuales han sido usados para la docencia de alumnos de enseñanza secundaria. Las estadísticas del proceso de enseñanza-aprendizaje permiten validar ciertos aspectos de dicho trabajo. Se describen dichos laboratorios y la mejora del aprendizaje en cuanto a conocimientos procedimentales y conceptuales, así como la mejora de la interactividad respecto al aprendizaje con análogas aplicaciones con objetivos de aprendizaje idénticos, pero careciendo de la componente de laboratorio virtual. Se explican algunas de las experiencias realizadas con los alumnos. Los resultados sugieren, que dentro de la educación tecnológica de la educación secundaria, los laboratorios virtuales pueden ser explotados como un efectivo y motivacional entorno de aprendizaje. ABSTRACT Recently, there has been a surge of interest in learning to code, focusing especially on career opportunities. It is easy to understand why: the number of jobs for programmers and computer scientists is growing rapidly. On the other hand, the psychologists think that computational thinking is a fundamental skill for everyone, not just for computer scientists. To reading, writing, and arithmetic, we should add computational thinking to every child’s analytical ability. It is necessary to change workforce requirements mean that new workers will need ever more sophisticated skills in science, mathematics, engineering and technology. Consequently, the contents about Information Technology as well as electronics, coding, robotics and control increase in Technology Education in High School . The development and utilization of the Virtual Laboratories of Control and Robotics help to achieve this goal. We focus on control and robotics because a control and robotics project includes other technologies contents like electronics, coding,... A web site with Virtual Laboratories of Control and Robotics was implemented. In this work, six groups of virtual laboratories for teaching control and robotics in preuniversity level are shown. These Virtual Laboratories were used for teaching students at high school. The statistics of teaching-learning process allow to check some issues of this work. The laboratories, the improvement of learning (concepts and procedures) and interactivity are described and are compared to similar applications. They share identical learning objectives but they lack the virtual laboratory aspect. Some experiences with students are explained too. The results suggest that within high school technology education, virtual laboratories can be exploited as effective and motivational learning environments.

Advanced Control Strategies for a 6 DoF Hydraulic Parallel Robot Based on the Dynamic Model

Nowadays robots have made their way into real applications that were prohibitive and unthinkable thirty years ago. This is mainly due to the increase in power computations and the evolution in the theoretical field of robotics and control. Even though there is plenty of information in the current literature on this topics, it is not easy to find clear concepts of how to proceed in order to design and implement a controller for a robot. In general, the design of a controller requires of a complete understanding and knowledge of the system to be controlled. Therefore, for advanced control techniques the systems must be first identified. Once again this particular objective is cumbersome and is never straight forward requiring of great expertise and some criteria must be adopted. On the other hand, the particular problem of designing a controller is even more complex when dealing with Parallel Manipulators (PM), since their closed-loop structures give rise to a highly nonlinear system. Under this basis the current work is developed, which intends to resume and gather all the concepts and experiences involve for the control of an Hydraulic Parallel Manipulator. The main objective of this thesis is to provide a guide remarking all the steps involve in the designing of advanced control technique for PMs. The analysis of the PM under study is minced up to the core of the mechanism: the hydraulic actuators. The actuators are modeled and experimental identified. Additionally, some consideration regarding traditional PID controllers are presented and an adaptive controller is finally implemented. From a macro perspective the kinematic and dynamic model of the PM are presented. Based on the model of the system and extending the adaptive controller of the actuator, a control strategy for the PM is developed and its performance is analyzed with simulation.

Dynamic visual servo control of a 4-axis joint tool to track image trajectories during machining complex shapes

A large part of the new generation of computer numerical control systems has adopted an architecture based on robotic systems. This architecture improves the implementation of many manufacturing processes in terms of flexibility, efficiency, accuracy and velocity. This paper presents a 4-axis robot tool based on a joint structure whose primary use is to perform complex machining shapes in some non-contact processes. A new dynamic visual controller is proposed in order to control the 4-axis joint structure, where image information is used in the control loop to guide the robot tool in the machining task. In addition, this controller eliminates the chaotic joint behavior which appears during tracking of the quasi-repetitive trajectories required in machining processes. Moreover, this robot tool can be coupled to a manipulator robot in order to form a multi-robot platform for complex manufacturing tasks. Therefore, the robot tool could perform a machining task using a piece grasped from the workspace by a manipulator robot. This manipulator robot could be guided by using visual information given by the robot tool, thereby obtaining an intelligent multi-robot platform controlled by only one camera.

Semantic localization in the PCL library

The semantic localization problem in robotics consists in determining the place where a robot is located by means of semantic categories. The problem is usually addressed as a supervised classification process, where input data correspond to robot perceptions while classes to semantic categories, like kitchen or corridor. In this paper we propose a framework, implemented in the PCL library, which provides a set of valuable tools to easily develop and evaluate semantic localization systems. The implementation includes the generation of 3D global descriptors following a Bag-of-Words approach. This allows the generation of fixed-dimensionality descriptors from any type of keypoint detector and feature extractor combinations. The framework has been designed, structured and implemented to be easily extended with different keypoint detectors, feature extractors as well as classification models. The proposed framework has also been used to evaluate the performance of a set of already implemented descriptors, when used as input for a specific semantic localization system. The obtained results are discussed paying special attention to the internal parameters of the BoW descriptor generation process. Moreover, we also review the combination of some keypoint detectors with different 3D descriptor generation techniques.

3DCOMET: 3D compression methods test dataset

The use of 3D data in mobile robotics applications provides valuable information about the robot’s environment. However usually the huge amount of 3D information is difficult to manage due to the fact that the robot storage system and computing capabilities are insufficient. Therefore, a data compression method is necessary to store and process this information while preserving as much information as possible. A few methods have been proposed to compress 3D information. Nevertheless, there does not exist a consistent public benchmark for comparing the results (compression level, distance reconstructed error, etc.) obtained with different methods. In this paper, we propose a dataset composed of a set of 3D point clouds with different structure and texture variability to evaluate the results obtained from 3D data compression methods. We also provide useful tools for comparing compression methods, using as a baseline the results obtained by existing relevant compression methods.

[College of Engineering (University of Michigan) publications].

Also contains brochures, directories, manuals, and programs from various College of Engineering student organizations such as the Society of Women Engineers and Tau Beta Pi.