Evaluation of the Photometrics CH250 CCD Camera for use in the NOAA/MLML Marine Optics System

This report summarizes initial work to incorporate Photometries CH250 charge-coupled device (CCD) detectors in the NOAAIMLML Marine Optics System (MOS). The MOS spectroradiometer will be used primarily in the Marine Optics Buoy (MOBY) to surface truth the ocean color satellite, SeaWiFS, scheduled for launch later this year. This work was funded through Contract NAS5-31746 to NASA, Goddard Space Flight Center. (PDF contains 24 pages)

Two mechanisms for population inversion via two-colour coherent excitation in three-level systems

We analyse the physical origin of population inversion via continuous wave two-colour coherent excitation in three-level systems by dressing the inverted transition. Two different mechanisms are identified as being responsible for the population inversion. For V-configured systems and cascade (E) configured systems with inversion on the lower transition, the responsible mechanism is the selective trapping of dressed states, and the population inversion approaches the ideal value of 1. For Lambda-configured systems and Xi-configured systems with inversion on the upper transition, population inversion is based on the selective excitation of dressed states, with the population inversion tending towards 0.5. As the essential difference between these two mechanisms, the selective trapping of dressed states occurs in systems with strong decay into dressed states while the selective excitation appears in systems with strong decay out of dressed states.

Nonlinear optics and wavelength translation via cavity-optomechanics

The field of cavity-optomechanics explores the interaction of light with sound in an ever increasing array of devices. This interaction allows the mechanical system to be both sensed and controlled by the optical system, opening up a wide variety of experiments including the cooling of the mechanical resonator to its quantum mechanical ground state and the squeezing of the optical field upon interaction with the mechanical resonator, to name two.

In this work we explore two very different systems with different types of optomechanical coupling. The first system consists of two microdisk optical resonators stacked on top of each other and separated by a very small slot. The interaction of the disks causes their optical resonance frequencies to be extremely sensitive to the gap between the disks. By careful control of the gap between the disks, the optomechanical coupling can be made to be quadratic to first order which is uncommon in optomechanical systems. With this quadratic coupling the light field is now sensitive to the energy of the mechanical resonator and can directly control the potential energy trapping the mechanical motion. This ability to directly control the spring constant without modifying the energy of the mechanical system, unlike in linear optomechanical coupling, is explored.

Next, the bulk of this thesis deals with a high mechanical frequency optomechanical crystal which is used to coherently convert photons between different frequencies. This is accomplished via the engineered linear optomechanical coupling in these devices. Both classical and quantum systems utilize the interaction of light and matter across a wide range of energies. These systems are often not naturally compatible with one another and require a means of converting photons of dissimilar wavelengths to combine and exploit their different strengths. Here we theoretically propose and experimentally demonstrate coherent wavelength conversion of optical photons using photon-phonon translation in a cavity-optomechanical system. For an engineered silicon optomechanical crystal nanocavity supporting a 4 GHz localized phonon mode, optical signals in a 1.5 MHz bandwidth are coherently converted over a 11.2 THz frequency span between one cavity mode at wavelength 1460 nm and a second cavity mode at 1545 nm with a 93% internal (2% external) peak efficiency. The thermal and quantum limiting noise involved in the conversion process is also analyzed and, in terms of an equivalent photon number signal level, are found to correspond to an internal noise level of only 6 and 4 times 10x^-3 quanta, respectively.

We begin by developing the requisite theoretical background to describe the system. A significant amount of time is then spent describing the fabrication of these silicon nanobeams, with an emphasis on understanding the specifics and motivation. The experimental demonstration of wavelength conversion is then described and analyzed. It is determined that the method of getting photons into the cavity and collected from the cavity is a fundamental limiting factor in the overall efficiency. Finally, a new coupling scheme is designed, fabricated, and tested that provides a means of coupling greater than 90% of photons into and out of the cavity, addressing one of the largest obstacles with the initial wavelength conversion experiment.

Nonlinear optics in planar silica-on-silicon disk resonators

Optical frequency combs (OFCs) provide direct phase-coherent link between optical and RF frequencies, and enable precision measurement of optical frequencies. In recent years, a new class of frequency combs (microcombs) have emerged based on parametric frequency conversions in dielectric microresonators. Micocombs have large line spacing from 10's to 100's GHz, allowing easy access to individual comb lines for arbitrary waveform synthesis. They also provide broadband parametric gain bandwidth, not limited by specific atomic or molecular transitions in conventional OFCs. The emerging applications of microcombs include low noise microwave generation, astronomical spectrograph calibration, direct comb spectroscopy, and high capacity telecommunications.

In this thesis, research is presented starting with the introduction of a new type of chemically etched, planar silica-on-silicon disk resonator. A record Q factor of 875 million is achieved for on-chip devices. A simple and accurate approach to characterize the FSR and dispersion of microcavities is demonstrated. Microresonator-based frequency combs (microcombs) are demonstrated with microwave repetition rate less than 80 GHz on a chip for the first time. Overall low threshold power (as low as 1 mW) of microcombs across a wide range of resonator FSRs from 2.6 to 220 GHz in surface-loss-limited disk resonators is demonstrated. The rich and complex dynamics of microcomb RF noise are studied. High-coherence, RF phase-locking of microcombs is demonstrated where injection locking of the subcomb offset frequencies are observed by pump-detuning-alignment. Moreover, temporal mode locking, featuring subpicosecond pulses from a parametric 22 GHz microcomb, is observed. We further demonstrated a shot-noise-limited white phase noise of microcomb for the first time. Finally, stabilization of the microcomb repetition rate is realized by phase lock loop control.

For another major nonlinear optical application of disk resonators, highly coherent, simulated Brillouin lasers (SBL) on silicon are also demonstrated, with record low Schawlow-Townes noise less than 0.1 Hz^2/Hz for any chip-based lasers and low technical noise comparable to commercial narrow-linewidth fiber lasers. The SBL devices are efficient, featuring more than 90% quantum efficiency and threshold as low as 60 microwatts. Moreover, novel properties of the SBL are studied, including cascaded operation, threshold tuning, and mode-pulling phenomena. Furthermore, high performance microwave generation using on-chip cascaded Brillouin oscillation is demonstrated. It is also robust enough to enable incorporation as the optical voltage-controlled-oscillator in the first demonstration of a photonic-based, microwave frequency synthesizer. Finally, applications of microresonators as frequency reference cavities and low-phase-noise optomechanical oscillators are presented.

21. Sitzung des FAO/WHO Codex Alimentarius Komitees für Fische und Fischerzeugnisse in Bergen/Norwegen

Auf der 21. Sitzung des Fischkomitees wurden die in den letzten 4 Jahren mit dem Ziel der Vereinfachung überarbeiteten Standardentwürfe für Erzeugnisse abschließend beraten und an die Kommission zur Annahme überwiesen. Die verschiedenen Codes of Practice werden am Beispiel des von einer Arbeitsgruppe revidierten und um HACCP-Prinzipien erweiterten Codes für tiefgefrorene Fischfilets von 7 neu eingesetzten Arbeitsgruppen überarbeitet. Eine Regelung über Richtwerte für Quecksilber in Fischen ist in Aussicht.

Aperiodic structures in optics and integrated optics and the transverse Bragg reflector laser

The first part of this work describes the uses of aperiodic structures in optics and integrated optics. In particular, devices are designed, fabricated, tested and analyzed which make use of a chirped grating corrugation on the surface of a dielectric waveguide. These structures can be used as input-output couplers, multiplexers and demultiplexers, and broad band filters.

Next, a theoretical analysis is made of the effects of a random statistical variation in the thicknesses of layers in a dielectric mirror on its reflectivity properties. Unlike the intentional aperiodicity introduced in the chirped gratings, the aperiodicity in the Bragg reflector mirrors is unintentional and is present to some extent in all devices made. The analysis involved in studying these problems relies heavily on the coupled mode formalism. The results are compared with computer experiments, as well as tests of actual mirrors.

The second part of this work describes a novel method for confining light in the transverse direction in an injection laser. These so-called transverse Bragg reflector lasers confine light normal to the junction plane in the active region, through reflection from an adjacent layered medium. Thus, in principle, it is possible to guide light in a dielectric layer whose index is lower than that of the surrounding material. The design, theory and testing of these diode lasers are discussed.

On the nutrition of the predatory cladocerans Leptodora and Bythotrephes. [Translation of: Byulleten' Institute Biologii Vodokhranilishch 6, pp. 21-22, 1960]

Results of the investigation on certain problems of the nutrition of Leptodora and Bythotrephes in Rybinsk Reservoir (Russia) are reviewed. To clarify the composition of the food of Leptodora and Bythotrephes in this period, experiments were provided on their nutrition by cyclopids and rotifers.

Mastigophora and Rhizopoda found in saline lakes Weissovo and Repnoie (near Slaviansk). Selected passages describing Ochromonas species and Pedinella. [Translation of: Trudy Obshch.Ispyt.Prir.imp.khar'kov.Univ. 21 119-140, 1888]

This translation includes selected passages of a longer paper on Mastigophora and Rhizopoda found in saline lakes Weissovo and Repnoie. The translation focuses on describing taxonomy and morphology of Ochromonas species and Pedinella. Plates and figures of the original paper are not included in the translation.

Desarrollo sostenible y Agenda 21 Local

Resumen (ESPAÑOL) En el presente trabajo se ha tratado de analizar la evolución, tanto del concepto de Desarrollo Sostenible, como de la herramienta Agenda 21 Local, verificando la creciente preocupación que se está extendiendo en la ciudadanía, en las instituciones y en las empresas, así como la irreversibilidad de la mayoría de los resultados alcanzados. En este marco, se han estudiado los casos concretos de la implantación de la Agenda 21 Local en Europa, España, Euskadi y Getxo, por ser este último el municipio en el que resido. Con este estudio, se confirma la hipótesis de que, aunque en la implantación de la Agenda 21 Local se aprecia un esfuerzo realizado notable, queda todavía mucho camino por recorrer en la senda hacia la sostenibilidad.

Life cycle of Pisidium obtusale Jenyns. [Translation from: Informatsionnyi Byulleten Biologiya Vnutrennikh Vod No.3 17-21, 1969.]

Pisidium obtusale in the neighbourhood of Borka occurs in deep pools on upland bogs. The majority of water-bodies where this mollusc lives are temporary. Their bottoms are covered with sedges, and sometimes mosses occur. Evidently there is a marked attraction of P. obtusale to places overgrown by willow. In pools remote from scrub or woody vegetation it does not appear. Temporary water-bodies fill up with melt water in the middle or the end of April and finally dry up at the end of July or the beginning of August. Observations on the life cycle of P. obtusale started on 21 April 1966, following on the filling-up of the water-body by melt water. The findings of the study are presented in this paper.

The possibilities and dangers in using malachite green in pisciculture.[Translation from: Informatsionnyi Byulleten Biologiya Vnutrennikh Vod No.3 17-21, 1969.]

For many years a dye has been used in the practise of pisciculture and pond management, which is known by the name of malachite green, and is used to combat fungus on fish, fish eggs and external animal parasites on fish. The authors describe the problem of the application of malachite green in pisciculture and undertake special, complementary research.

Rhythms of division of some algae in situ and in laboratory culture. [Translation from: Studii Cerc.Biol.(Bot.) 21, 61-65, 1969. ]

The rhythm of division of 9 species belonging to different groups of algae were analysed in situ and in the laboratory. The research which developed in different environmental conditions attempted to establish the capacity for multiplication and assimilation of chlorophyll on the part of the algae under study with a view to placing them in a culture. The results obtained showed that the green multicellular algae (eg. Ulothrix) and the blue algae (eg. Lyngbya, Oscillatoria) are able to produce an appreciable quantity of dry matter, just as the unicellular algae. At the same time it arises that amongst the numerous factors of the environment, temperature plays one of the most important roles in the process of multiplication.