An investigation into the temperature distribution resulting from cutting of compact bone using a reciprocating bone saw

Surgical procedures such as osteotomy and hip replacement involve the cutting of bone with the aid of various manual and powered cutting instruments including manual and powered bone saws. The basic mechanics of bone sawing processes are consistent with most other material sawing processes such as for wood or metal. Frictional rubbing between the blade of the saw and the bone results in the generation of localised heating of the cut bone. Research studies have been carried out which consider the design of the bone saw which deals with specifics of the saw teeth geometry and research which examines the effect of drilling operations on heating of the bone has shown that elevated temperatures will occur from frictional overheating. This overheating in localised areas is known to have an impact on the rate of healing of the bone post operation and the sharpness life of the blade. The purpose of this study was to measure the temperature at three zones at fixed intervals of 3mm, 6mm, and 9mm away from the cutting zone. It should be noted that it was the first time that this measurement technique was used to measure the temperature gradient through the bone specimen thereby establishing the extent to which clinicians are experiencing thermal injury during sawing of bone while using a reciprocating saw. The effect of various cutting feed rate on temperature elevation was also investigated in this research. The results showed that there will be a region of bone at least 9mm either side of the cutting blade experiencing thermal injury as temperatures in this region exceeded the threshold temperature of 44°C for necrosis (cell death).

Investigating the long term planning framework for the Galway Bay community from climate change.

This research looked at the scientific evidence available on climate change and in particular, projections on sea level rise which ranged from 0.5m to 2m by the end of the century. These projections were then considered in an Irish context. A review of current policy in Ireland revealed that there was no dedicated Government policy on climate change or coastal zone management. In terms of spatial planning policy, it became apparent that there was little or no guidance on climate change either at a national, regional or local level. Therefore, to determine the likely impacts of sea level rise in Ireland based on current spatial planning practice and policy, a scenario-building exercise was carried out for two case study areas in Galway Bay. The two case study areas were: Oranmore, a densely populated town located to the east of Inner Galway Bay; and Tawin Island, a rural dispersed community, located to the south east of Inner Galway Bay. A ‘best’ and ‘worse’ case scenario was envisaged for both areas in terms of sea level rise. In the absence of specific climate change policies it was projected that in the ‘best’ case scenario of 0.5m sea level rise, Tawin Island would suffer serious and adverse impacts while Oranmore was likely to experience slight to moderate impacts. However, in the ‘worse’ case scenario of a 2m sea level rise, it was likely that Tawin Island would be abandoned while many houses, businesses and infrastructure built within the floodplain of Oranmore Bay would be inundated and permanently flooded. In this regard, it was the author’s opinion that a strategic and integrated climate change policy and adaptation plan is vital for the island of Ireland that recognises the importance of integrated land use and spatial planning in terms of mitigation and adaptation to climate change.

Acoustic emission analysis of the effect of a 2D wedge shaped blade on the compact bone cutting process

Surgeons may use a number of cutting instruments such as osteotomes and chisels to cut bone during an operative procedure. The initial loading of cortical bone during the cutting process results in the formation of microcracks in the vicinity of the cutting zone with main crack propagation to failure occuring with continued loading. When a material cracks, energy is emitted in the form of Acoustic Emission (AE) signals that spread in all directions, therefore, AE transducers can be used to monitor the occurrence and development of microcracking and crack propagation in cortical bone. In this research, number of AE signals (hits) and related parameters including amplitude, duration and absolute energy (abs-energy) were recorded during the indentation cutting process by a wedge blade on cortical bone specimens. The cutting force was also measured to correlate between load-displacement curves and the output from the AE sensor. The results from experiments show AE signals increase substantially during the loading just prior to fracture between 90% and 100% of maximum fracture load. Furthermore, an amplitude threshold value of 64dB (with approximate abs-energy of 1500 aJ) was established to saparate AE signals associated with microcracking (41 – 64dB) from fracture related signals (65 – 98dB). The results also demonstrated that the complete fracture event which had the highest duration value can be distinguished from other growing macrocracks which did not lead to catastrophic fracture. It was observed that the main crack initiation may be detected by capturing a high amplitude signal at a mean load value of 87% of maximum load and unsteady crack propagation may occur just prior to final fracture event at a mean load value of 96% of maximum load. The author concludes that the AE method is useful in understanding the crack initiation and fracture during the indentation cutting process.

Ecological and Economic Impacts within the Environmental Input-Output Framework

The environmental input-output approach reveals the channels through which the environmental burdens of production activities are transmitted throughout the economy. This paper uses the input-output framework and analyses the changes in Spanish emission multipliers during the period 1995-2000. By decomposing the global changes in multipliers into different components, it is possible to evaluate separately the economic and ecological impacts captured by the environmental input-output model. Specifically, in this study we distinguish between the effects on multipliers caused by changes in emission coefficients (the ecological impacts) and the effects on multipliers caused by changes in technical coefficients (the economic impacts). Our results show a significant improvement in the ecological impacts of production activities, which contributed negatively to changes in emission multipliers. They also show a deterioration in the economic impacts, which contributed positively to changes in emission multipliers. Together, these two effects lead to a small reduction in global multipliers during the period of analysis. Our results also show significant differences in the individual behaviour of different sectors in terms of their contribution to multiplier changes. Since there are considerable differences in the way individual sectors affect the changes in emission levels, and in the intensity of these effects, this means that the final effects will basically depend on the activity considered. Keywords: emission multipliers, multipliers' changes, ecological impacts, economic impacts.

The private and fiscal returns to schooling and the effect of public policies on private incentives to invest in education: a general framework and some results for the EU

This paper develops a comprehensive framework for the quantitative analysis of the private and fiscal returns to schooling and of the effect of public policies on private incentives to invest in education. This framework is applied to 14 member states of the European Union. For each of these countries, we construct estimates of the private return to an additional year of schooling for an individual of average attainment, taking into account the effects of education on wages and employment probabilities after allowing for academic failure rates, the direct and opportunity costs of schooling, and the impact of personal taxes, social security contributions and unemployment and pension benefits on net incomes. We also construct a set of effective tax and subsidy rates that measure the effects of different public policies on the private returns to education, and measures of the fiscal returns to schooling that capture the long-term effects of a marginal increase in attainment on public finances under c

Taxation of banks: a theoretical framework

The goal of this paper is to develop a model of financial intermediation analyze the impact of various forms of taxation. The model considers in a unified framework various functions of banks: monitoring, transaction services and asset transformation. Particular attention is devoted to conditions for separability between deposits and loans. The analysis focuses on: (i) competition between banks and alternative financial arrangements (investment funds and organized security markets), (ii) regulation, and (iii) bank's monopoly power and risk taking behavior.

Non compact euclidean cone 3-manifolds with cone angles less than 2∏

We study of noncompact Euclidean cone manifolds with cone angles less than c&2π and singular locus a submanifold. More precisely, we describe its structure outside a compact set. As a corol lary we classify those with cone angles & 2π/3 and those with cone angles = 2π/3.

Parametric analysis of different compact tension specimens for fracture toughness characterisation in woven composite materials

Estudi elaborat a partir d’una estada a l’ Imperial College London, entre juliol i novembre de 2006. En aquest treball s’ha investigat la geometria més apropiada per a la caracterització de la tenacitat a fractura intralaminar de materials compòsits laminats amb teixit. L’objectiu és assegurar la propagació de l’esquerda sense que la proveta falli abans per cap altre mecanisme de dany per tal de permetre la caracterització experimental de la tenacitat a fractura intralaminar de materials compòsits laminats amb teixit. Amb aquesta fi, s’ha dut a terme l’anàlisi paramètrica de diferents tipus de provetes mitjançant el mètode dels elements finits (FE) combinat amb la virtual crack closure technique (VCCT). Les geometries de les provetes analitzades corresponen a la proveta de l’assaig compact tension (CT) i diferents variacions com la extended compact tension (ECT), la proveta widened compact tension (WCT), tapered compact tension (TCT) i doubly-tapered compact tension (2TCT). Com a resultat d’aquestes anàlisis s’han derivat diferents conclusions per obtenir la geometria de proveta més apropiada per a la caracterització de la tenacitat a fractura intralaminar de materials compòsits laminats amb teixit. A més, també s’han dut a terme una sèrie d’assaigs experimentals per tal de validar els resultats de les anàlisis paramètriques. La concordança trobada entre els resultats numèrics i experimentals és bona tot i la presència d’efectes no previstos durant els assaigs experimentals.

Aspirations of Olympism: a framework for considering the athlete’s experience in the Olympic Movement at the close of the twentieth century

The text corresponds to the lecture given by Prof. Kidd as part the programme of activities during his stay in Barcelona in 1996 as invited professor of the International Chair in Olympism (IOC-UAB).

The Private and fiscal returns to schooling and the effect of public policies on private incentives to invest in education: a general framework and some results for the EU

This paper develops a comprehensive framework for the quantitative analysis of the private and fiscal returns to schooling and of the effect of public policies on private incentives to invest in education. This framework is applied to 14 member states of the European Union. For each of these countries, we construct estimates of the private return to an additional year of schooling for an individual of average attainment, taking into account the effects of education on wages and employment probabilities after allowing for academic failure rates, the direct and opportunity costs of schooling, and the impact of personal taxes, social security contributions and unemployment and pension benefits on net incomes. We also construct a set of effective tax and subsidy rates that measure the effects of different public policies on the private returns to education, and measures of the fiscal returns to schooling that capture the long-term effects of a marginal increase in attainment on public finances under conditions that approximate general equilibrium.

Political alliances and organisational change in political parties: a framework for analysis

This article sets out a theoretical framework for the study of organisational change within political alliances. To achieve this objective it uses as a starting point a series of premises, the most notable of which include the definition of organisational change as a discrete, complex and focussed phenomenon of changes in power within the party. In accordance with these premises, it analyses the synthetic model of organisational change proposed by Panebianco (1988). After examining its limitations, a number of amendments are proposed to adapt it to the way political alliances operate. The above has resulted in the design of four new models. In order to test its validity and explanatory power in a preliminary manner, the second part looks at the organisational change of the UDC within the CiU alliance between 1978 and 2001. The discussion and conclusions reached demonstrate the problems of determinism of the Panebianco model and suggest, tentatively, the importance of the power balance within the alliance as a key factor.

Avoidance Policies – A New Conceptual Framework

This paper develops a general theoretical framework within which a heterogeneous group taxpayers confront a market that supplies a variety of schemes for reducing tax liability, and uses this framework to explore the impact of a wide range of anti-avoidance policies. Schemes differ in their legal effectiveness and hence in the risks to which they expose taxpayers - risks which go beyond the risk of audit considered in the conventional literature on evasion. Given the individual taxpayer’s circumstances, the prices charged for the schemes and the policy environment, the model predicts (i) whether or not any given taxpayer will acquire a scheme, and (ii) if they do so, which type of scheme they will acquire. The paper then analyses how these decisions, and hence the tax gap, are influenced by four generic types of policy: Disclosure – earlier information leading to faster closure of loopholes; Penalties – introduction of penalties for failed avoidance; Policy Design – fundamental policy changes that design out opportunities for avoidance; Product Register - the introduction of GAARs or mini-GAARs that give greater clarity about how different types of scheme will be treated. The paper shows that when considering the indirect/behavioural effects of policies on the tax gap it is important to recognise that these operate on two different margins. First policies will have deterrence effects – their impact on the quantum of taxpayers choosing to acquire different types schemes as distinct to acquiring no scheme at all. There will be a range of such deterrence effects reflecting the range of schemes available in the market. But secondly, since different schemes generate different tax gaps, policies will also have switching effects as they induce taxpayers who previously acquired one type of scheme to acquire another. The first three types of policy generate positive deterrence effects but differ in the switching effects they produce. The fourth type of policy produces mixed deterrence effects.

J2EE tienda virtual application framework

En el siguiente documento podrá encontrar de una forma clara y entendedora, a través de la creación de un sencillo aplicativo, el mecanismo para la creación de una aplicación J2EE basada en el framework de desarrollo Yakarta Struts. En el mismo partirá desde cero, desde el inicio en la captación de requerimientos, pasando por la etapa de análisis y diseño y la posterior implementación.

A Framework for Analyzing Language and Welfare

The paper proposes a general model that will encompass trade and social benefits of a common language, a preference for a variety of languages, the fundamental role of translators, an emotional attachment to maternal language, and the threat that globalization poses to the vast majority of languages. With respect to people’s emotional attachment, the model considers minorities to suffer losses from the subordinate status of their language. In addition, the model treats the threat to minority language as coming from the failure of the parents in the minority to transmit their maternal language (durably) to their children. Some familiar results occur. In particular, we encounter the usual social inefficiencies of decentralized solutions to language learning when the sole benefits of the learning are communicative benefits (though translation intervenes). However, these social inefficiencies assume a totally different air when the con-sumer gains of variety are brought in. One fundamental aim of the paper is to bring together contributions to the economics of language from labor economics, network externalities and international trade that are typically treated separately.