Fluorescence-enhanced optical imaging on three-dimensional phantoms using a hand-held probe based frequency-domain intensified charge coupled device (ICCD) optical imager

Fluorescence-enhanced optical imaging is an emerging non-invasive and non-ionizing modality towards breast cancer diagnosis. Various optical imaging systems are currently available, although most of them are limited by bulky instrumentation, or their inability to flexibly image different tissue volumes and shapes. Hand-held based optical imaging systems are a recent development for its improved portability, but are currently limited only to surface mapping. Herein, a novel optical imager, consisting primarily of a hand-held probe and a gain-modulated intensified charge coupled device (ICCD) detector, is developed towards both surface and tomographic breast imaging. The unique features of this hand-held probe based optical imager are its ability to; (i) image large tissue areas (5×10 sq. cm) in a single scan, (ii) reduce overall imaging time using a unique measurement geometry, and (iii) perform tomographic imaging for tumor three-dimensional (3-D) localization. Frequency-domain based experimental phantom studies have been performed on slab geometries (650 ml) under different target depths (1-2.5 cm), target volumes (0.45, 0.23 and 0.10 cc), fluorescence absorption contrast ratios (1:0, 1000:1 to 5:1), and number of targets (up to 3), using Indocyanine Green (ICG) as fluorescence contrast agents. An approximate extended Kalman filter based inverse algorithm has been adapted towards 3-D tomographic reconstructions. Single fluorescence target(s) was reconstructed when located: (i) up to 2.5 cm deep (at 1:0 contrast ratio) and 1.5 cm deep (up to 10:1 contrast ratio) for 0.45 cc-target; and (ii) 1.5 cm deep for target as small as 0.10 cc at 1:0 contrast ratio. In the case of multiple targets, two targets as close as 0.7 cm were tomographically resolved when located 1.5 cm deep. It was observed that performing multi-projection (here dual) based tomographic imaging using a priori target information from surface images, improved the target depth recovery over using single projection based imaging. From a total of 98 experimental phantom studies, the sensitivity and specificity of the imager was estimated as 81-86% and 43-50%, respectively. With 3-D tomographic imaging successfully demonstrated for the first time using a hand-held based optical imager, the clinical translation of this technology is promising upon further experimental validation from in-vitro and in-vivo studies.

A research platform for artificial neural networks with applications in pediatric epilepsy

This dissertation established a state-of-the-art programming tool for designing and training artificial neural networks (ANNs) and showed its applicability to brain research. The developed tool, called NeuralStudio, allows users without programming skills to conduct studies based on ANNs in a powerful and very user friendly interface. A series of unique features has been implemented in NeuralStudio, such as ROC analysis, cross-validation, network averaging, topology optimization, and optimization of the activation function’s slopes. It also included a Support Vector Machines module for comparison purposes. Once the tool was fully developed, it was applied to two studies in brain research. In the first study, the goal was to create and train an ANN to detect epileptic seizures from subdural EEG. This analysis involved extracting features from the spectral power in the gamma frequencies. In the second application, a unique method was devised to link EEG recordings to epileptic and nonepileptic subjects. The contribution of this method consisted of developing a descriptor matrix that can be used to represent any EEG file regarding its duration and the number of electrodes. The first study showed that the inter-electrode mean of the spectral power in the gamma frequencies and its duration above a specific threshold performs better than the other frequencies in seizure detection, exhibiting an accuracy of 95.90%, a sensitivity of 92.59%, and a specificity of 96.84%. The second study yielded that Hjorth’s parameter activity is sufficient to accurately relate EEG to epileptic and non-epileptic subjects. After testing, accuracy, sensitivity and specificity of the classifier were all above 0.9667. Statistical tests measured the superiority of activity at over 99.99 % certainty. It was demonstrated that (1) the spectral power in the gamma frequencies is highly effective in locating seizures from EEG and (2) activity can be used to link EEG recordings to epileptic and non-epileptic subjects. These two studies required high computational load and could be addressed thanks to NeuralStudio. From a medical perspective, both methods proved the merits of NeuralStudio in brain research applications. For its outstanding features, NeuralStudio has been recently awarded a patent (US patent No. 7502763).

A Research Platform for Artificial Neural Networks with Applications in Pediatric Epilepsy

This dissertation established a state-of-the-art programming tool for designing and training artificial neural networks (ANNs) and showed its applicability to brain research. The developed tool, called NeuralStudio, allows users without programming skills to conduct studies based on ANNs in a powerful and very user friendly interface. A series of unique features has been implemented in NeuralStudio, such as ROC analysis, cross-validation, network averaging, topology optimization, and optimization of the activation function’s slopes. It also included a Support Vector Machines module for comparison purposes. Once the tool was fully developed, it was applied to two studies in brain research. In the first study, the goal was to create and train an ANN to detect epileptic seizures from subdural EEG. This analysis involved extracting features from the spectral power in the gamma frequencies. In the second application, a unique method was devised to link EEG recordings to epileptic and non-epileptic subjects. The contribution of this method consisted of developing a descriptor matrix that can be used to represent any EEG file regarding its duration and the number of electrodes. The first study showed that the inter-electrode mean of the spectral power in the gamma frequencies and its duration above a specific threshold performs better than the other frequencies in seizure detection, exhibiting an accuracy of 95.90%, a sensitivity of 92.59%, and a specificity of 96.84%. The second study yielded that Hjorth’s parameter activity is sufficient to accurately relate EEG to epileptic and non-epileptic subjects. After testing, accuracy, sensitivity and specificity of the classifier were all above 0.9667. Statistical tests measured the superiority of activity at over 99.99 % certainty. It was demonstrated that 1) the spectral power in the gamma frequencies is highly effective in locating seizures from EEG and 2) activity can be used to link EEG recordings to epileptic and non-epileptic subjects. These two studies required high computational load and could be addressed thanks to NeuralStudio. From a medical perspective, both methods proved the merits of NeuralStudio in brain research applications. For its outstanding features, NeuralStudio has been recently awarded a patent (US patent No. 7502763).

Numerical Investigation on the Heat Transfer Enhancement Using Micro/Nano Phase-Change Particulate Flow

The introduction of phase change material fluid and nanofluid in micro-channel heat sink design can significantly increase the cooling capacity of the heat sink because of the unique features of these two kinds of fluids. To better assist the design of a high performance micro-channel heat sink using phase change fluid and nanofluid, the heat transfer enhancement mechanism behind the flow with such fluids must be completely understood. A detailed parametric study is conducted to further investigate the heat transfer enhancement of the phase change material particle suspension flow, by using the two-phase non-thermal-equilibrium model developed by Hao and Tao (2004). The parametric study is conducted under normal conditions with Reynolds numbers of Re=600-900 and phase change material particle concentrations ¡Ü0.25 , as well as extreme conditions of very low Reynolds numbers (Re < 50) and high phase change material particle concentration (0.5-0.7) slurry flow. By using the two newly-defined parameters, named effectiveness factor and performance index, respectively, it is found that there exists an optimal relation between the channel design parameters, particle volume fraction, Reynolds number, and the wall heat flux. The influence of the particle volume fraction, particle size, and the particle viscosity, to the phase change material suspension flow, are investigated and discussed. The model was validated by available experimental data. The conclusions will assist designers in making their decisions that relate to the design or selection of a micro-pump suitable for micro or mini scale heat transfer devices. To understand the heat transfer enhancement mechanism of the nanofluid flow from the particle level, the lattice Boltzmann method is used because of its mesoscopic feature and its many numerical advantages. By using a two-component lattice Boltzmann model, the heat transfer enhancement of the nanofluid is analyzed, through incorporating the different forces acting on the nanoparticles to the two-component lattice Boltzmann model. It is found that the nanofluid has better heat transfer enhancement at low Reynolds numbers, and the Brownian motion effect of the nanoparticles will be weakened by the increase of flow speed.

Design and Implementation of Tools for STM Studies in UHV and at the Solid-Liquid Interface

This thesis presents details of the design and development of novel tools and instruments for scanning tunneling microscopy (STM), and may be considered as a repository for several years' worth of development work. The author presents design goals and implementations for two microscopes. First, a novel Pan-type STM was built that could be operated in an ambient environment as a liquid-phase STM. Unique features of this microscope include a unibody frame, for increased microscope rigidity, a novel slider component with large Z-range, a unique wiring scheme and damping mechanism, and a removable liquid cell. The microscope exhibits a high level of mechanical isolation at the tunnel junction, and operates excellently as an ambient tool. Experiments in liquid are on-going. Simultaneously, the author worked on designs for a novel low temperature, ultra-high vacuum (LT-UHV) instrument, and these are presented as well. A novel stick-slip vertical coarse approach motor was designed and built. To gauge the performance of the motor, an in situ motion sensing apparatus was implemented, which could measure the step size of the motor to high precision. A new driving circuit for stick-slip inertial motors is also presented, that o ffers improved performance over our previous driving circuit, at a fraction of the cost. The circuit was shown to increase step size performance by 25%. Finally, a horizontal sample stage was implemented in this microscope. The build of this UHV instrument is currently being fi nalized. In conjunction with the above design projects, the author was involved in a collaborative project characterizing N-heterocyclic carbene (NHC) self-assembled monolayers (SAMs) on Au(111) films. STM was used to characterize Au substrate quality, for both commercial substrates and those manufactured via a unique atomic layer deposition (ALD) process by collaborators. Ambient and UHV STM was then also used to characterize the NHC/Au(111) films themselves, and several key properties of these films are discussed. During this study, the author discovered an unexpected surface contaminant, and details of this are also presented. Finally, two models are presented for the nature of the NHC-Au(111) surface interaction based on the observed film properties, and some preliminary theoretical work by collaborators is presented.

Financial media, globalisation, and China’s economic integration: comparing narrative construction of the Economist and Caijing

In June 2015, legal frameworks of the Asian Infrastructural Investment Bank were signed by its 57 founding members. Proposed and initiated by China, this multilateral development bank is considered to be an Asian counterpart to break the monopoly of the World Bank and the International Monetary Fund. In October 2015, China’s Central Bank announced a benchmark interest rate cut to combat the economic slowdown. The easing policy coincides with the European Central Bank’s announcement of doubts over US Fed’s commitment to raise interest rates. Global stock markets responded positively to China’s move, with the exception of the indexes from Wall Street (Bland, 2015; Elliott, 2015). In the meantime, China’s ‘One Belt, One Road’ (or New Silk Road Economic Belt) became atopic of discourse in relation to its growing global economy, as China pledged $40 billion to trade and infrastructure projects (Bermingham, 2015). The foreign policy aims to reinforce the economic belt from western China through Central Asia towards Europe, as well as to construct maritime trading routes from coastal China through the South China Sea (Summers, 2015). In 2012, The Economist launched a new China section, to reveal the complexity of the‘meteoric rise’ of China. John Micklethwait, who was then the chief editor of the magazine, said that China’s emergence as a global power justified giving it a section of its own(Roush, 2012). In July 2015, Hu Shuli, the former chief editor of Caijing, announced the launch of a think tank and financial data service division called Caixin Insight Group, which encompasses the new Caixin China Purchasing Managers Index (PMI). Incooperation with with Markit Group, a principal global provider of PMI, the index soon became a widely cited economic indicator. One anecdote from November’s Caixin shows how much has changed: in a high-profile dialogue between Hu Shuli and Kevin Rudd, Hu insisted on asking questions in English; interestingly, the former Prime Minister of Australia insisted on replying in Chinese. These recent developments point to one thing: the economic ascent of China and its increasing influence on the power play between economics and politics in world markets. China has begun to take a more active role in rule making and enforcement under neoliberal frameworks. However, due to the country’s size and the scale of its economy in comparison to other countries, China’s version of globalisation has unique characteristics. The ‘Capitalist-socialist’ paradox is vital to China’s market-oriented transformation. In order to comprehend how such unique features are articulated and understood, there are several questions worth investigating in the realms of media and communication studies,such as how China’s neoliberal restructuring is portrayed and perceived by different types of interested parties, and how these portrayals are de-contextualised and re-contextualised in global or Anglo-American narratives. Therefore, based on a combination of the themes of globalisation, financial media and China’s economic integration, this thesis attempts to explore how financial media construct the narratives of China’s economic globalisation through the deployment of comparative and multi-disciplinary approaches. Two outstanding elite financial magazines, Britain’s The Economist, which has a global readership and influence, and Caijing, China’s leading financial magazine, are chosen as case studies to exemplify differing media discourses, representing, respectively, Anglo-American and Chinese socio-economic and political backgrounds, as well as their own journalistic cultures. This thesis tries to answer the questions of how and why China’s neoliberal restructuring is constructed from a globally-oriented perspective. The construction primarily involves people who are influential in business and policymaking. Hence, the analysis falls into the paradigm of elite-elite communication, which is an important but relatively less developed perspective in studying China and its globalisation. The comparing of characteristics of narrative construction are the result of the textual analysis of articles published over a ten-year period (mid-1998 to mid-2008). The corpus of samples come from the two media outlets’ coverage of three selected events:China becoming a member of the World Trade Organization, its outward direct investment, and the listing of stocks of Chinese companies in overseas exchanges, which are mutually exclusive in sample collection and collectively exhaustive in the inclusion of articles regarding China’s economic globalisation. The findings help to understand that, despite language, socio-economic and political differences, elite financial media with globally-oriented readerships share similar methods of and approaches to agenda setting, the evaluation of news prominence, the selection of frame, and the advocacy of deeply rooted neoliberal ideas. The comparison of their distinctive features reflects the different phases of building up the sense of identity in their readers as global elites, as well as the different economic interests that are aligned with the corresponding readerships. However, textual analysis is only relevant in terms of exploring how the narratives are constructed and the elements they include; textual analysis alone prevents us from seeing the obstacles and the constrains of the journalistic practices of construction. Therefore, this thesis provides a brief discussion of interviews with practitioners from the two media, in order to understand how similar or different narratives are manifested and perceived, how the concept of neoliberalism deviates from and is justified in the Chinese context, and how and for what purpose deviations arise from Western to Chinese contexts. The thesis also contributes to defining financial media in the domain of elite communication. The relevant and closely interlocking concepts of globalisation, elitism and neoliberalism are discussed, and are used as a theoretical bedrock in the analysis of texts and contexts. It is important to address the agenda-setting and ideological role of elite financial media, because of its narrative formula of infusing business facts with opinions,which is important in constructing the global elite identity as well as influencing neoliberal policy-making. On the other hand, ‘journalistic professionalism’ has been redefined, in that the elite identity is shared by the content producer, reader and the actors in the news stories emerging from the much-compressed news cycle. The professionalism of elite financial media requires a dual definition, that of being professional in the understanding of business facts and statistics, and that of being professional in the making sense of stories by deploying economic logic.

Pragmatic Aspects of Legal Translation in the European Institutions

This paper aims at identifying and describing the current major pragmatic issues of legal translation in the context of the EU. There some facts that provide legal translation in this context with unique features, such as the binding nature of EU law for the 28 Member States and the authenticated versions of the normative acts adopted by the EU institutions. These features have led to several authors talking about a new type of legal translation that should be approached and studied independently. We aim at identifying the reasons for this as well as describing the major translation strategies and theoretical approaches that the authors have proposed in order to help EU translators and lawyerlinguists overcome the translation problems arising from divergences of legal systems and legal traditions within the Member States.

Transcriptional profiling of chronic clinical hepatic schistosomiasis japonica indicates reduced metabolism and immune responses

Schistosomiasis is a significant cause of human morbidity and mortality. We performed a genome-wide transcriptional survey of liver biopsies obtained from Chinese patients with chronic schistosomiasis only, or chronic schistosomiasis with a current or past history of viral hepatitis B. Both disease groups were compared with patients with no prior history or indicators of any liver disease. Analysis showed in the main, downregulation in gene expression, particularly those involved in signal transduction via EIF2 signalling and mTOR signalling, as were genes associated with cellular remodelling. Focusing on immune associated pathways, genes were generally downregulated. However, a set of three genes associated with granulocytes, MMP7, CLDN7, CXCL6 were upregulated. Differential gene profiles unique to schistosomiasis included the gene Granulin which was decreased despite being generally considered a marker for liver disease, and IGBP2 which is associated with increased liver size, and was the most upregulated gene in schistosomiasis only patients, all of which presented with hepatomegaly. The unique features of gene expression, in conjunction with previous reports in the murine model of the cellular composition of granulomas, granuloma formation and recovery, provide an increased understanding of the molecular immunopathology and general physiological processes underlying hepatic schistosomiasis.

Initiation of Orderly Spinning Detonation Waves via Phased Sparking

Thesis (Master's)--University of Washington, 2016-06

Paire stéréoscopique Panomorphe pour la reconstruction 3D d’objets d’intérêt dans une scène

Il existe désormais une grande variété de lentilles panoramiques disponibles sur le marché dont certaines présentant des caractéristiques étonnantes. Faisant partie de cette dernière catégorie, les lentilles Panomorphes sont des lentilles panoramiques anamorphiques dont le profil de distorsion est fortement non-uniforme, ce qui cause la présence de zones de grandissement augmenté dans le champ de vue. Dans un contexte de robotique mobile, ces particularités peuvent être exploitées dans des systèmes stéréoscopiques pour la reconstruction 3D d’objets d’intérêt qui permettent à la fois une bonne connaissance de l’environnement, mais également l’accès à des détails plus fins en raison des zones de grandissement augmenté. Cependant, à cause de leur complexité, ces lentilles sont difficiles à calibrer et, à notre connaissance, aucune étude n’a réellement été menée à ce propos. L’objectif principal de cette thèse est la conception, l’élaboration et l’évaluation des performances de systèmes stéréoscopiques Panomorphes. Le calibrage a été effectué à l’aide d’une technique établie utilisant des cibles planes et d’une boîte à outils de calibrage dont l’usage est répandu. De plus, des techniques mathématiques nouvelles visant à rétablir la symétrie de révolution dans l’image (cercle) et à uniformiser la longueur focale (cercle uniforme) ont été développées pour voir s’il était possible d’ainsi faciliter le calibrage. Dans un premier temps, le champ de vue a été divisé en zones à l’intérieur desquelles la longueur focale instantanée varie peu et le calibrage a été effectué pour chacune d’entre elles. Puis, le calibrage général des systèmes a aussi été réalisé pour tout le champ de vue simultanément. Les résultats ont montré que la technique de calibrage par zone ne produit pas de gain significatif quant à la qualité des reconstructions 3D d’objet d’intérêt par rapport au calibrage général. Cependant, l’étude de cette nouvelle approche a permis de réaliser une évaluation des performances des systèmes stéréoscopiques Panomorphes sur tout le champ de vue et de montrer qu’il est possible d’effectuer des reconstructions 3D de qualité dans toutes les zones. De plus, la technique mathématique du cercle a produit des résultats de reconstructions 3D en général équivalents à l’utilisation des coordonnées originales. Puisqu’il existe des outils de calibrage qui, contrairement à celui utilisé dans ce travail, ne disposent que d’un seul degré de liberté sur la longueur focale, cette technique pourrait rendre possible le calibrage de lentilles Panomorphes à l’aide de ceux-ci. Finalement, certaines conclusions ont pu être dégagées quant aux facteurs déterminants influençant la qualité de la reconstruction 3D à l’aide de systèmes stéréoscopiques Panomorphes et aux caractéristiques à privilégier dans le choix des lentilles. La difficulté à calibrer les optiques Panomorphes en laboratoire a mené à l’élaboration d’une technique de calibrage virtuel utilisant un logiciel de conception optique et une boîte à outils de calibrage. Cette approche a permis d’effectuer des simulations en lien avec l’impact des conditions d’opération sur les paramètres de calibrage et avec l’effet des conditions de calibrage sur la qualité de la reconstruction. Des expérimentations de ce type sont pratiquement impossibles à réaliser en laboratoire mais représentent un intérêt certain pour les utilisateurs. Le calibrage virtuel d’une lentille traditionnelle a aussi montré que l’erreur de reprojection moyenne, couramment utilisée comme façon d’évaluer la qualité d’un calibrage, n’est pas nécessairement un indicateur fiable de la qualité de la reconstruction 3D. Il est alors nécessaire de disposer de données supplémentaires pour juger adéquatement de la qualité d’un calibrage.

An experimental investigation of air flow and convective heat transfer in enclosures having large ventilative flow rates

The prediction of convective heat transfer in enclosures under high ventilative flow rates is primarily of interest for building design and simulation purposes. Current models are based on experiments performed forty years ago with flat plates under natural convection conditions.

Get your website noticed How to reach, acquire and retain customers online

The Internet has developed itself as a major tool in marketing. With the advent of the Internet, online marketing has become the main marketing strategy used by most companies to promote their products. However, with the Internet, competition among companies has increased as each company has an opportunity to reach the same type of potential consumers through the Internet. This implies that for a company to attract and retain customers, it has to employ unique features in its website in order to make it stand out. This study was aimed at determining the features of a company’s website which can help to attract and retain customers. It was also meant to find out about the online marketing strategies that can be used to attract customers at the initial stage as well as find out on how companies engage their customers on their site. In this study, the qualitative method of research was used. Data collection was done using interviews. The interviewees were selected from marketing agencies in Finland

Orthodox versus unorthodox care: A qualitative study on where rural women seek healthcare during pregnancy and childbirth in Southwest, Nigeria

Introduction Utilization of orthodox health facilities for maternal health services is determined by factors operating at the individual, household, community and state level. The prevalence of small family norm is one of the identified variables operating within the community which influences the decision of where to access care (orthodox/traditional). The objective of the study was to determine the use of orthodox versus unorthodox maternity healthcare and determinants among rural women in southwest Nigeria. Methods A qualitative study was done and involved three focus group discussions. A semi-structured interview guide was used to collect information from women of reproductive age group within a rural Local Government Area in Lagos state. Results Most of the women access some form of healthcare during pregnancy, orthodox, unorthodox or both. Those who patronize both services concurrently do so to benefit from the two as each has some unique features such as herbal concoctions for traditional, ultrasound and immunization of babies for orthodox. Traditional belief exerts a strong influence on decision of where to access maternal healthcare services. Actual place of delivery is determined by individual and household factors including financial resources. Conclusion Rural women utilize one or both orthodox and unorthodox maternal health services for different reasons. Ward Development Committees should be strengthened so as to reach the communities, educate and convince women to dispel myths which limit their use of orthodox care. Training and monitoring of Traditional Birth Attendants (TBAs) are vital to eliminate harmful practices. We also recommend improved financial access to orthodox healthcare.

DESIGN OF EFFICIENT IN-NETWORK DATA PROCESSING AND DISSEMINATION FOR VANETS

By providing vehicle-to-vehicle and vehicle-to-infrastructure wireless communications, vehicular ad hoc networks (VANETs), also known as the “networks on wheels”, can greatly enhance traffic safety, traffic efficiency and driving experience for intelligent transportation system (ITS). However, the unique features of VANETs, such as high mobility and uneven distribution of vehicular nodes, impose critical challenges of high efficiency and reliability for the implementation of VANETs. This dissertation is motivated by the great application potentials of VANETs in the design of efficient in-network data processing and dissemination. Considering the significance of message aggregation, data dissemination and data collection, this dissertation research targets at enhancing the traffic safety and traffic efficiency, as well as developing novel commercial applications, based on VANETs, following four aspects: 1) accurate and efficient message aggregation to detect on-road safety relevant events, 2) reliable data dissemination to reliably notify remote vehicles, 3) efficient and reliable spatial data collection from vehicular sensors, and 4) novel promising applications to exploit the commercial potentials of VANETs. Specifically, to enable cooperative detection of safety relevant events on the roads, the structure-less message aggregation (SLMA) scheme is proposed to improve communication efficiency and message accuracy. The scheme of relative position based message dissemination (RPB-MD) is proposed to reliably and efficiently disseminate messages to all intended vehicles in the zone-of-relevance in varying traffic density. Due to numerous vehicular sensor data available based on VANETs, the scheme of compressive sampling based data collection (CS-DC) is proposed to efficiently collect the spatial relevance data in a large scale, especially in the dense traffic. In addition, with novel and efficient solutions proposed for the application specific issues of data dissemination and data collection, several appealing value-added applications for VANETs are developed to exploit the commercial potentials of VANETs, namely general purpose automatic survey (GPAS), VANET-based ambient ad dissemination (VAAD) and VANET based vehicle performance monitoring and analysis (VehicleView). Thus, by improving the efficiency and reliability in in-network data processing and dissemination, including message aggregation, data dissemination and data collection, together with the development of novel promising applications, this dissertation will help push VANETs further to the stage of massive deployment.

Strategic Optimization Techniques For FRTU Deployment and Chip Physical Design

Combinatorial optimization is a complex engineering subject. Although formulation often depends on the nature of problems that differs from their setup, design, constraints, and implications, establishing a unifying framework is essential. This dissertation investigates the unique features of three important optimization problems that can span from small-scale design automation to large-scale power system planning: (1) Feeder remote terminal unit (FRTU) planning strategy by considering the cybersecurity of secondary distribution network in electrical distribution grid, (2) physical-level synthesis for microfluidic lab-on-a-chip, and (3) discrete gate sizing in very-large-scale integration (VLSI) circuit. First, an optimization technique by cross entropy is proposed to handle FRTU deployment in primary network considering cybersecurity of secondary distribution network. While it is constrained by monetary budget on the number of deployed FRTUs, the proposed algorithm identi?es pivotal locations of a distribution feeder to install the FRTUs in different time horizons. Then, multi-scale optimization techniques are proposed for digital micro?uidic lab-on-a-chip physical level synthesis. The proposed techniques handle the variation-aware lab-on-a-chip placement and routing co-design while satisfying all constraints, and considering contamination and defect. Last, the first fully polynomial time approximation scheme (FPTAS) is proposed for the delay driven discrete gate sizing problem, which explores the theoretical view since the existing works are heuristics with no performance guarantee. The intellectual contribution of the proposed methods establishes a novel paradigm bridging the gaps between professional communities.