Sonothrombolysis for acute ischemic stroke: a systematic review of randomized controlled trials

Object. Sonothrombolysis has recently been considered an emerging modality for the treatment of stroke. The purpose of the present paper was to review randomized clinical studies concerning the effects of sonothrombolysis associated with tissue plasminogen activator (tPA) on acute ischemic stroke. Methods. Systematic searches for literature published between January 1996 and July 2011 were performed for studies regarding sonothrombolysis combined with tPA for acute ischemic stroke. Only randomized controlled trials were included. Data extraction was based on ultrasound variables, patient characteristics, and outcome variables (rate of intracranial hemorrhages and arterial recanalization). Results. Four trials were included in this study; 2 trials evaluated the effect of transcranial Doppler (TCD) ultrasonography on sonothrombolysis, and 2 addressed transcranial color-coded duplex (TCCD) ultrasonography. The frequency of ultrasound waves varied from 1.8 to 2 MHz. The duration of thrombus exposure to ultrasound energy ranged from 60 to 120 minutes. Sample sizes were small, recanalization was evaluated at different time points (60 and 120 minutes), and inclusion criteria were heterogeneous. Sonothrombolysis combined with tPA did not lead to an increase in symptomatic intracranial hemorrhagic complications. Two studies demonstrated that patients treated with ultrasound combined with tPA had statistically significant higher rates of recanalization than patients treated with tPA alone. Conclusions. Despite the heterogeneity and the limitations of the reviewed studies, there is evidence that sonothrombolysis associated with tPA is a safe procedure and results in an increased rate of recanalization in the setting of acute ischemic stroke when wave frequencies and energy intensities of diagnostic ultrasound systems are used. (http://thejns.org/doi/abs/10.3171/2011.10.FOCUS11251)

Femtosecond Laser in Polymeric Materials: Microfabrication of Doped Structures and Micromachining

The use of laser light to modify the material's surface or bulk as well as to induce changes in the volume through a chemical reaction has received great attention in the last few years, due to the possibility of tailoring the material's properties aiming at technological applications. Here, we report on recent progress of microstructuring and microfabrication in polymeric materials by using femtosecond lasers. In the first part, we describe how polymeric materials' micromachining, either on the surface or bulk, can be employed to change their optical and chemical properties promising for fabricating waveguides, resonators, and self-cleaning surfaces. In the second part, we discuss how two-photon absorption polymerization can be used to fabricate active microstructures by doping the basic resin with molecules presenting biological and optical properties of interest. Such microstructures can be used to fabricate devices with applications in optics, such as microLED, waveguides, and also in medicine, such as scaffolds for tissue growth.

Genetic and environmental influences on blood pressure and physical activity: a study of nuclear families from Muzambinho, Brazil

Blood pressure (BP) and physical activity (PA) levels are inversely associated. Since genetic factors account for the observed variation in each of these traits, it is possible that part of their association may be related to common genetic and/or environmental influences. Thus, this study was designed to estimate the genetic and environmental correlations of BP and PA phenotypes in nuclear families from Muzambinho, Brazil. Families including 236 offspring (6 to 24 years) and their 82 fathers and 122 mothers (24 to 65 years) were evaluated. BP was measured, and total PA (TPA) was assessed by an interview (commuting, occupational, leisure time, and school time PA). Quantitative genetic modeling was used to estimate maximal heritability (h²), and genetic and environmental correlations. Heritability was significant for all phenotypes (systolic BP: h² = 0.37 ± 0.10, P < 0.05; diastolic BP: h² = 0.39 ± 0.09, P < 0.05; TPA: h² = 0.24 ± 0.09, P < 0.05). Significant genetic (r g) and environmental (r e) correlations were detected between systolic and diastolic BP (r g = 0.67 ± 0.12 and r e = 0.48 ± 0.08, P < 0.05). Genetic correlations between BP and TPA were not significant, while a tendency to an environmental cross-trait correlation was found between diastolic BP and TPA (r e = -0.18 ± 0.09, P = 0.057). In conclusion, BP and PA are under genetic influences. Systolic and diastolic BP share common genes and environmental influences. Diastolic BP and TPA are probably under similar environmental influences.

Empirical and fundamental mechanical tests in the evaluation of dough and bread rheological properties

Bread dough and particularly wheat dough, due to its viscoelastic behaviour, is probably the most dynamic and complicated rheological system and its characteristics are very important since they highly affect final products’ textural and sensorial properties. The study of dough rheology has been a very challenging task for many researchers since it can provide numerous information about dough formulation, structure and processing. This explains why dough rheology has been a matter of investigation for several decades. In this research rheological assessment of doughs and breads was performed by using empirical and fundamental methods at both small and large deformation, in order to characterize different types of doughs and final products such as bread. In order to study the structural aspects of food products, image analysis techniques was used for the integration of the information coming from empirical and fundamental rheological measurements. Evaluation of dough properties was carried out by texture profile analysis (TPA), dough stickiness (Chen and Hoseney cell) and uniaxial extensibility determination (Kieffer test) by using a Texture Analyser; small deformation rheological measurements, were performed on a controlled stress–strain rheometer; moreover the structure of different doughs was observed by using the image analysis; while bread characteristics were studied by using texture profile analysis (TPA) and image analysis. The objective of this research was to understand if the different rheological measurements were able to characterize and differentiate the different samples analysed. This in order to investigate the effect of different formulation and processing conditions on dough and final product from a structural point of view. For this aim the following different materials were performed and analysed: - frozen dough realized without yeast; - frozen dough and bread made with frozen dough; - doughs obtained by using different fermentation method; - doughs made by Kamut® flour; - dough and bread realized with the addition of ginger powder; - final products coming from different bakeries. The influence of sub-zero storage time on non-fermented and fermented dough viscoelastic performance and on final product (bread) was evaluated by using small deformation and large deformation methods. In general, the longer the sub-zero storage time the lower the positive viscoelastic attributes. The effect of fermentation time and of different type of fermentation (straight-dough method; sponge-and-dough procedure and poolish method) on rheological properties of doughs were investigated using empirical and fundamental analysis and image analysis was used to integrate this information throughout the evaluation of the dough’s structure. The results of fundamental rheological test showed that the incorporation of sourdough (poolish method) provoked changes that were different from those seen in the others type of fermentation. The affirmative action of some ingredients (extra-virgin olive oil and a liposomic lecithin emulsifier) to improve rheological characteristics of Kamut® dough has been confirmed also when subjected to low temperatures (24 hours and 48 hours at 4°C). Small deformation oscillatory measurements and large deformation mechanical tests performed provided useful information on the rheological properties of samples realized by using different amounts of ginger powder, showing that the sample with the highest amount of ginger powder (6%) had worse rheological characteristics compared to the other samples. Moisture content, specific volume, texture and crumb grain characteristics are the major quality attributes of bread products. The different sample analyzed, “Coppia Ferrarese”, “Pane Comune Romagnolo” and “Filone Terra di San Marino”, showed a decrease of crumb moisture and an increase in hardness over the storage time. Parameters such as cohesiveness and springiness, evaluated by TPA that are indicator of quality of fresh bread, decreased during the storage. By using empirical rheological tests we found several differences among the samples, due to the different ingredients used in formulation and the different process adopted to prepare the sample, but since these products are handmade, the differences could be account as a surplus value. In conclusion small deformation (in fundamental units) and large deformation methods showed a significant role in monitoring the influence of different ingredients used in formulation, different processing and storage conditions on dough viscoelastic performance and on final product. Finally the knowledge of formulation, processing and storage conditions together with the evaluation of structural and rheological characteristics is fundamental for the study of complex matrices like bakery products, where numerous variable can influence their final quality (e.g. raw material, bread-making procedure, time and temperature of the fermentation and baking).

Electrode Materials for Ionic Liquid Based-Supercapacitors

The development of safe, high energy and power electrochemical energy-conversion systems can be a response to the worldwide demand for a clean and low-fuel-consuming transport. This thesis work, starting from a basic studies on the ionic liquid (IL) electrolytes and carbon electrodes and concluding with tests on large-size IL-based supercapacitor prototypes demonstrated that the IL-based asymmetric configuration (AEDLCs) is a powerful strategy to develop safe, high-energy supercapacitors that might compete with lithium-ion batteries in power assist-hybrid electric vehicles (HEVs). The increase of specific energy in EDLCs was achieved following three routes: i) the use of hydrophobic ionic liquids (ILs) as electrolytes; ii) the design and preparation of carbon electrode materials of tailored morphology and surface chemistry to feature high capacitance response in IL and iii) the asymmetric double-layer carbon supercapacitor configuration (AEDLC) which consists of assembling the supercapacitor with different carbon loadings at the two electrodes in order to exploit the wide electrochemical stability window (ESW) of IL and to reach high maximum cell voltage (Vmax). Among the various ILs investigated the N-methoxyethyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (PYR1(2O1)TFSI) was selected because of its hydrophobicity and high thermal stability up to 350 °C together with good conductivity and wide ESW, exploitable in a wide temperature range, below 0°C. For such exceptional properties PYR1(2O1)TFSI was used for the whole study to develop large size IL-based carbon supercapacitor prototype. This work also highlights that the use of ILs determines different chemical-physical properties at the interface electrode/electrolyte with respect to that formed by conventional electrolytes. Indeed, the absence of solvent in ILs makes the properties of the interface not mediated by the solvent and, thus, the dielectric constant and double-layer thickness strictly depend on the chemistry of the IL ions. The study of carbon electrode materials evidences several factors that have to be taken into account for designing performing carbon electrodes in IL. The heat-treatment in inert atmosphere of the activated carbon AC which gave ACT carbon featuring ca. 100 F/g in IL demonstrated the importance of surface chemistry in the capacitive response of the carbons in hydrophobic ILs. The tailored mesoporosity of the xerogel carbons is a key parameter to achieve high capacitance response. The CO2-treated xerogel carbon X3a featured a high specific capacitance of 120 F/g in PYR14TFSI, however, exhibiting high pore volume, an excess of IL is required to fill the pores with respect to that necessary for the charge-discharge process. Further advances were achieved with electrodes based on the disordered template carbon DTC7 with pore size distribution centred at 2.7 nm which featured a notably high specific capacitance of 140 F/g in PYR14TFSI and a moderate pore volume, V>1.5 nm of 0.70 cm3/g. This thesis work demonstrated that by means of the asymmetric configuration (AEDLC) it was possible to reach high cell voltage up to 3.9 V. Indeed, IL-based AEDLCs with the X3a or ACT carbon electrodes exhibited specific energy and power of ca. 30 Wh/kg and 10 kW/kg, respectively. The DTC7 carbon electrodes, featuring a capacitance response higher of 20%-40% than those of X3a and ACT, respectively, enabled the development of a PYR14TFSI-based AEDLC with specific energy and power of 47 Wh/kg and 13 kW/kg at 60°C with Vmax of 3.9 V. Given the availability of the ACT carbon (obtained from a commercial material), the PYR1(2O1)TFSI-based AEDLCs assembled with ACT carbon electrodes were selected within the EU ILHYPOS project for the development of large-size prototypes. This study demonstrated that PYR1(2O1)TFSI-based AEDLC can operate between -30°C and +60°C and its cycling stability was proved at 60°C up to 27,000 cycles with high Vmax up to 3.8 V. Such AEDLC was further investigated following USABC and DOE FreedomCAR reference protocols for HEV to evaluate its dynamic pulse-power and energy features. It was demonstrated that with Vmax of 3.7 V at T> 30 °C the challenging energy and power targets stated by DOE for power-assist HEVs, and at T> 0 °C the standards for the 12V-TSS and 42V-FSS and TPA 2s-pulse applications are satisfied, if the ratio wmodule/wSC = 2 is accomplished, which, however, is a very demanding condition. Finally, suggestions for further advances in IL-based AEDLC performance were found. Particularly, given that the main contribution to the ESR is the electrode charging resistance, which in turn is affected by the ionic resistance in the pores that is also modulated by pore length, the pore geometry is a key parameter in carbon design not only because it defines the carbon surface but also because it can differentially “amplify” the effect of IL conductivity on the electrode charging-discharging process and, thus, supercapacitor time constant.

Regulation der Sphingosinkinase 1 und 2 und der neutralen Ceramidase in renalen Mesangiumzellen der Ratte

In den letzten Jahren gewann die Erforschung des Sphingolipidstoffwechsels in den verschiedensten Zellsystemen immer mehr an Bedeutung, da es sich zeigte, dass einige Sphingolipidspezies, vor allem Ceramid und Sphingosin-1-Phosphat, als wichtige intra- und extrazelluläre Botenstoffe wirken und bei einer Vielzahl unterschiedlicher zellulärer Antworten, wie Apoptose, Proliferation und Migration, eine wichtige Rolle spielen. Während Ceramid eher pro-apoptotisch und wachstumshemmend wirkt, begünstigt Sphingosin-1-Phosphat als „Gegenspieler“ eher die Proliferation und das Zellwachstum. Ceramid kann relativ schnell in Sphingosin-1-Phosphat umgewandelt werden durch die Wirkung zweier Enzymklassen, den Ceramidasen und den Sphingosinkinasen. Konsequenterweise ist die Regulation dieser Enzyme von entscheidender Bedeutung für das zelluläre Gleichgewicht zwischen Ceramid und Sphingosin-1-Phosphat. Im Rahmen dieser Dissertation wurde die Wirkung von extrazellulären Nukleotiden, die ebenfalls als Regulatoren zahlreicher zellulärer Antworten, wie z.B. Proliferation und Migration, bekannt sind und über entsprechende Oberflächenrezeptoren, die Purinrezeptoren, wirken, auf die Aktivität besonders der Sphingosinkinasen 1 und 2 näher untersucht. Es sollte geklärt werden, ob die Sphingosinkinasen an einigen durch extrazelluläre Nukleotide induzierbaren zellulären Antworten, in diesem Falle der Migration und der Proliferation von Zellen, beteiligt sind. Als Zellsystem wurden Nierenmesangiumzellen verwendet, da diese Zellen bei verschiedenen entzündlichen Nierenerkrankungen (Glomerulonephritiden) eine wichtige Rolle spielen. Es konnte in dieser Arbeit gezeigt werden, dass extrazelluläre Nukleotide die Aktivität der Sphingosinkinase 1 in den Mesangiumzellen stimulieren können. Zu beobachten ist dabei eine biphasische Aktivitätssteigerung der Sphingosinkinase 1. Die erste Aktivitätssteigerung nach einer Kurzzeitstimulation ist dabei auf eine Phosphorylierung des Enzyms zurückzuführen, während die zweite Aktivitätssteigerung mit einer Aktivierung des Sphingosinkinase 1-Promotors, einer verstärkten mRNA-Expression und einer de novo Proteinsynthese zu erklären ist. Diese Induktion kann durch die Verwendung von Hemmstoffen des PKC- und MAPK-Signalweges, sowie durch Verwendung eines Transkriptions- (Actinomycin D) oder eines Translationsinhibitors (Cycloheximid) blockiert werden. Die Halbwertszeit der mRNA der Sphingosinkinase 1 in den Mesangiumzellen konnte auf ca. 20 Minuten bestimmt werden. Im Gegensatz dazu ist die Sphingosinkinase 2 nicht durch ATP aktivierbar, wohl aber durch diverse Abbauprodukte von ATP, wie AMP und Adenosin, sowie durch UTP und seine Abbauprodukten UDP und UMP. Die neutrale Ceramidase kann nicht durch ATP und UTP aktiviert werden, wohl aber durch P2X7-Rezeptoragonisten (Bz-ATP, αβ-Me-ATP, γS-ATP) und TPA. In einem zweiten Schritt wurde die Rolle der Sphingosinkinasen und der neutralen Ceramidase bei der durch extrazelluläre Nukleotide induzierten Migration und Proliferation untersucht. Es zeigte sich mit Hilfe von genspezifischer siRNA zur Depletion der Sphingosinkinasen und der neutralen Ceramidase, sowie durch Verwendung von Kinase-Hemmstoffen und damit einhergehend der Inhibierung der Signalwege und mit Hilfe von verschiedenen Zelllinien isoliert aus Wildtyp-, SPHK 1-überexprimierenden und mSPHK1-defizienten Mäusen, dass die Aktivierung der Sphingosinkinase 1 durch extrazelluläre Nukleotide von entscheidender Bedeutung für die Migrationsfähigkeit der Zellen ist, jedoch keinen signifikanten Einfluss auf die Proliferationsrate der Mesangiumzellen hat. Auch die Aktivität der neutralen Ceramidase ist von entscheidender Bedeutung für die Migrationsfähigkeit der Zellen. Durch Depletion der neutralen Ceramidase scheint Ceramid in den Zellen zu akkumulieren, was die Proliferationsrate reduziert. Für die Proliferation der Mesangiumzellen könnte die Sphingosinkinase 2 als negativer Regulator fungieren, wie die Experimente mit der genspezifischen siRNA unter UTP-Stimulation gezeigt haben. Für die Migration der Mesangiumzellen gilt darüber hinaus, dass auch das Produkt der Sphingosinkinase 1, Sphingosin-1-Phosphat, in der Lage ist, die Migration zu stimulieren. Im Gegensatz dazu spielt Sphingosin-1-Phosphat für die Induktion der Proliferation der hier verwendeten Zellen keine wesentliche Rolle. Zusammenfassend zeigen die Daten, dass die Sphingosinkinase 1 und vorgeschaltet auch die neutrale Ceramidase bei der Migration von Mesangiumzellen eine zentrale Rolle spielen und damit als therapeutische Angriffspunkte bei der Behandlung von Krankheiten, die durch eine vermehrte Migration gekennzeichnet sind, in Frage kommen.

Regulation der Phorbolester-induzierten Matrix-Metalloproteinase-9-Expression in humanen Brustkrebszelllinien durch Stickstoffmonoxid

Das Hauptziel dieser Arbeit war die Identifizierung der Regulationsebenen auf denen die TPA-induzierte Matrix-Metalloproteinase-9 (MMP-9) durch das nitrose Gas Stickstoffmonoxid (NO) in MCF-7-Zellen verändert wird. Dabei konnte sowohl mit Hilfe der Zymographie als auch mit einem MMP-9-Aktivitäts-ELISA gezeigt werden, dass die extrazellulären MMP-9-Spiegel durch die Behandlung der Zellen mit NO reduziert werden. Gleichzeitig zeigte sich auch eine durch NO bedingte Abnahme der intrazellulären MMP-9-Spiegel, wie mit Hilfe von Western-Blot-Analyse nachgewiesen werden konnte. Experimente mit dem Proteasominhibitor Lactacystin und dem Proteinsynthesehemmstoff Cycloheximid ließen darüber hinaus eine NO-bedingte Veränderung der MMP-9-Proteinstabilität ausschließen. Im Gegensatz dazu konnte mittels der metabolischen Markierung mit radioaktiv markiertem Methionin und Cystein gezeigt werden, dass die Proteinneusynthese der MMP-9 durch eine Behandlung der Zellen mit NO stark beeinträchtigt wird. In Übereinstimmung mit diesen Daten finden sich reduzierte MMP-9-mRNA-Spiegel auch in der polysomalen Zellfraktion von MCF-7-Zellen. Wie mit Hilfe des Transkriptionshemmstoffes Actinomycin D und durch Reportergenstudien mit hybriden MMP-9-Promotorkonstrukten gezeigt werden konnte, ist die NO-induzierte Reduktion der MMP-9-mRNA-Spiegel nicht auf eine Verringerung der MMP-9-mRNA-Stabilität zurückzuführen. Reportergenstudien mit einem 670bp langen Promotorfragment des 5’flankierenden Bereichs des humanen MMP-9-Gens zeigten jedoch auf, dass der hemmende Effekt des NOs zum Teil auf eine NO-vermittelte Abnahme der TPA-induzierten MMP-9-Promotoraktivität zurückgeführt werden kann. Demzufolge wurde in den nachfolgenden Experimenten nach den für die MMP-9-Expression notwendigen und von NO modulierten Transkriptionsfaktoren in MCF-7-Zellen gesucht. Anhand von Western-Blot-Analysen und Gelshiftanalysen konnte gezeigt werden, dass die Aktivität des Transkriptionsfaktors AP-1 in MCF-7-Zellen durch NO gehemmt wird, während weder die Expressionspiegel noch die Bindungsaffinität der Transkriptionsfaktoren NFκB und Sp1 durch die NO-Behandlung verändert sind. Weiterhin konnte unter Verwendung von pharmakologischen Inhibitoren der MAPK-Signalwege mit Hilfe der Western-Blot-Analyse nachgewiesen werden, dass MAPK-vermittelte Signalwege zwar für die Induktion der MMP-9-Expression essenziell sind, diese jedoch nicht von NO beeinflusst sind. Im Unterschied hierzu konnte mit Hilfe eines PKC-Aktivitätsassays gezeigt werden, dass die Gesamtaktivität von PKCs nach Behandlung von MCF-7-Zellen mit NO signifikant gehemmt ist. Zusammenfassend zeigen diese Untersuchungen, dass die NO-vermittelte Hemmung der TPA-induzierten MMP-9-Expression in MCF-7-Zellen im Wesentlichen auf eine NO-abhängige Reduktion der Protein-Kinase-C-Aktivität und einer daraus resultierenden Aktivitätshemmung des Transkriptionsfaktors AP-1 zurückgeführt werden kann.

Purificazione di plasminogeno con membrane di affinita'

Alcune patologie dell’occhio come la retinopatia diabetica, il pucker maculare, il distacco della retina possono essere curate con un intervento di vitrectomia. I rischi associati all’intervento potrebbero essere superati ricorrendo alla vitrectomia enzimatica con plasmina in associazione o in sostituzione della vitrectomia convenzionale. Inoltre, l’uso di plasmina autologa eviterebbe problemi di rigetto. La plasmina si ottiene attivando il plasminogeno con enzimi quali l’attivatore tissutale (tPA) e l’urochinasi ( uPA ) . La purificazione del plasminogeno dal sangue avviene normalmente attraverso cromatografia di affinità con resina. Tuttavia, le membrane di affinità costituiscono un supporto ideale per questa applicazione poiché possono essere facilmente impaccate prima dell’intervento, permettendo la realizzazione di un dispositivo monouso che fornisce un processo rapido ed economico. Obiettivo di questo lavoro è la preparazione di membrane di affinità per la purificazione del plasminogeno utilizzando L-lisina come ligando di affinità. Per questo scopo sono state usate membrane in cellulosa rigenerata ad attivazione epossidica, modificate con due diversi protocolli per l’immobilizzazione di L-lisina. La densità ligando è stata misurata mediante un saggio colorimetrico che usa l’acido arancio 7 come indicatore. La resa di immobilizzazione è stata studiata in funzione del tempo di reazione e della concentrazione di L-lisina. Le membrane ottimizzate sono state caratterizzate con esperimenti dinamici usando siero bovino e umano, i risultati sono stati confrontati con quelli ottenuti in esperimenti paralleli condotti con una resina commerciale di affinità con L-lisina. Durante gli esperimenti con siero, le frazioni provenienti da ogni fase cromatografica sono state raccolte e analizzate con HPLC ed elettroforesi SDS-PAGE. In particolare, l’elettroforesi dei campioni eluiti presenta una banda del plasminogeno ben definita indicando che le membrane di affinità con L-lisina sono adatte alla purificazione del plasminogeno. Inoltre, è emerso che le membrane hanno maggiore produttività della resina commerciale di riferimento.

Template-assisted patterning of functional polymers

In this thesis, anodic aluminum oxide (AAO) membranes, which provide well-aligned uniform mesoscopic pores with adjustable pore parameters, were fabricated and successfully utilized as templates for the fabrication of functional organic nanowires, nanorods and the respective well-ordered arrays. The template-assisted patterning technique was successfully applied for the realization of different objectives:rnHigh-density and well-ordered arrays of hole-conducting nanorods composed of cross-linked triphenylamine (TPA) and tetraphenylbenzidine (TPD) derivatives on conductive substrates like ITO/glass have been successfully fabricated. By applying a freeze-drying technique to remove the aqueous medium after the wet-chemical etching of the template, aggregation and collapsing of the rods was prevented and macroscopic areas of perfectly freestanding nanorods were feasible. Based on the hole-conducting nanorod arrays and their subsequent embedding into an electron-conducting polymer matrix via spin-coating, a novel routine concept for the fabrication of well-ordered all-organic bulk heterojunction for organic photovoltaic applications was successfully demonstrated. The increased donor/acceptor interface of the fabricated devices resulted in a remarkable increase of the photoluminescence quenching compared to a planar bilayer morphology. Further, the fundamental working principle of the templating approach for the solution-based all-organic photovoltaic device was demonstrated for the first time.rnFurthermore, in order to broaden the applicability of patterned surfaces, which are feasible via the template-based patterning of functional materials, AAO with hierarchically branched pores were fabricated and utilized as templates. By pursuing the common templating process hierarchically polymeric replicas, which show remarkable similarities with interesting biostructures, like the surface of the lotus leaf and the feet of a gecko, were successfully prepared.rnIn contrast to the direct infiltration of organic functional materials, a novel route for the fabrication of functional nanowires via post-modification of reactive nanowires was established. Therefore, reactive nanowires based on cross-linked pentafluorophenylesters were fabricated by utilizing AAO templates. The post-modification with fluorescent dyes was demonstrated. Furthermore, reactive wires were converted into well-dispersed poly(N-isopropylacrylamide) (PNIPAM) hydrogels, which exhibit a thermal-responsive reversible phase transition. The reversible thermal-responsible swelling of the PNIPAM nanowires exhibited a more than 50 % extended length than in the collapsed PNIPAM state. rnLast but not least, the shape-anisotropic pores of AAO were utilized to uniformly align the mesogens of a nematic liquid crystalline elastomer. Liquid crystalline nanowires with a narrow size distribution and uniform orientation of the liquid crystalline material were fabricated. It was shown that during the transition from the nematic to the isotropic phase the rod’s length shortened by roughly 40 percent. As such these liquid crystalline elastomeric nanowires may find application, as wire-shaped nanoactuators in various fields of research, like lab-on-chip systems, micro fluidics and biomimetics.rn

Systematic functionalization of molecules for molecular self-assembly

This thesis describes the investigation of systematically varied organic molecules for use in molecular self-assembly processes. All experiments were performed using high-resolution non-contact atomic force microscopy under UHV conditions and at room temperature. Using this technique, three different approaches for influencing intermolecular and molecule-surface interaction on the insulating calcite(10.4) surface were investigated by imaging the structure formation at the molecular scale. I first demonstrated the functionalization of shape-persistent oligo(p-benzamide)s that was engineered by introducing different functional groups and investigating their effect on the structural formation on the sample surface. The molecular core was designed to provide significant electrostatic anchoring towards the surface, while at the same time maintaining the flexibility to fine-tune the resulting structure by adjusting the intermolecular cohesion energy. The success of this strategy is based on a clear separation of the molecule-substrate interaction from the molecule-molecule interaction. My results show that sufficient molecule-surface anchoring can be achieved without restricting the structural flexibility that is needed for the design of complex molecular systems. Three derivatives of terephthalic acid (TPA) were investigated in chapter 7. Here, the focus was on changing the adhesion to the calcite surface by introducing different anchor functionalities to the TPA backbone. For all observed molecules, the strong substrate templating effect results in molecular structures that are strictly oriented along the calcite main crystal directions. This templating is especially pronounced in the case of 2-ATPA where chain formation on the calcite surface is observed in contrast to the formation of molecular layers in the bulk. At the same time, the amino group of 2-ATPA proved an efficient anchor functionality, successfully stabilizing the molecular chains on the sample surface. These findings emphasizes, once again, the importance of balancing and fine-tuning molecule-molecule and molecule-surface interactions in order to achieve stable, yet structurally flexible molecular arrangements on the sample surface. In the last chapter, I showed how the intrinsic property of molecular chirality decisively influences the structure formation in molecular self-assembly. This effect is especially pronounced in the case of the chiral heptahelicene-2-carboxylic acid. Deposition of the enantiopure molecules results in the formation of homochiral islands on the sample surface which is in sharp contrast to the formation of uni-directional double rows upon deposition of the racemate onto the same surface. While it remained uncertain from these previous experiments whether the double rows are composed of hetero- or homochiral molecules, I could clearly answer that question here and demonstrate that the rows are of heterochiral origin. Chirality, thus, proves to be another important parameter to steer the intermolecular interaction on surfaces. Altogether, the results of this thesis demonstrate that, in order to successfully control the structure formation in molecular self-assembly, the correct combination of molecule and surface properties is crucial. This is of special importance when working on substrates that exhibit a strong influence on the structure formation, such as the calcite(10.4) surface. Through the systematic variation of functional groups several important parameters that influence the balance between molecule-surface and molecule-molecule interaction were identified here, and the results of this thesis can, thus, act as a guideline for the rational design of molecules for use in molecular self-assembly.

Die Rolle von LRP1 in der Funktion des NMDA-Rezeptors

Ein funktionelles Zusammenspiel von LRP1, einem Mitglied der LDL-Rezeptorfamilie, mit dem NMDA-Rezeptor, einem Glutamat Rezeptor, wurde durch die Interaktion beider Proteine sowie eine tPa-vermittelte, LRP1-abhängige Signalübertragung durch den NMDA-Rezeptor belegt. Darüber hinaus zeigen Mäuse mit einem konditionellen neuronalen knock-out des Lrp1 Gens Verhaltensänderungen, die mit einer beeinträchtigten Signalübertragung durch NMDA-Rezeptoren assoziiert werden könnten. Die genaue Rolle von LRP1 in der NMDA-Rezeptor-Funktion bleibt allerdings noch unklar. In der vorliegenden Arbeit wurde die Rolle von LRP1 bei der Expression der NR2B-Untereinheit des NMDA-Rezeptors an der Zelloberfläche primärer kortikaler Neurone untersucht. Zu diesem Zweck wurde die knock-in Mauslinie LRP1ΔNPxY2, die sich durch eine Alanin Substitution im NPxY2 Motiv des LRP1 auszeichnet, eingesetzt. rnEs konnte gezeigt werden, dass diese knock-in Mutation in einer erhöhten Expression von LRP1 und der NMDA-Rezeptoruntereinheiten NR1 und NR2B an der Zelloberfläche primärer kortikaler Neurone resultiert. Der Effekt konnte durch eine reduzierte Endozytoserate von LRP1 und der NR1-und NR2B-Untereinheiten in primären LRP1ΔNPxY2 Neuronen erklärt werden. Darüber hinaus wurde ein verändertes Phosphorylierungsmuster der Internalisierungssignale der NR2B-Rezeptoruntereinheit Serin S1480 und Tyrosin Y1472 an der Zelloberfläche primärer LRP1ΔNPxY2 Neurone detektiert. Die verantwortlichen Kinasen Fyn und Kasein-Kinase II sind allerdings in LRP1ΔNPxY2 Neuronen im Vergleich zu den Wildtyp-Kontrollen nicht abweichend reguliert. In den Co-Immunopräzipitationsexperimenten wurde gezeigt, dass die Bindung von LRP1 mit NR2B durch die Phosphorylierung reguliert wird und dieser Regulationsmechanismus in LRP1ΔNPxY2 Neuronen beeinträchtigt ist. Dies resultiert in einer stärkeren Bindung von NR2B-Rezeptoruntereinheit an LRP1. Aufgrund reduzierter Internalisierungsraten von LRP1 in LRP1ΔNPxY2 Neuronen führt dieser Umstand zu einer Akkumulation beider Rezeptorproteine an der Zelloberfläche. Schließlich wurden die NMDA-Rezeptor-assoziierten Verhaltensänderungen wie die Hyperaktivität und die Defizite im direkten und umgekehrten räumlichen Lernvermögen in den LRP1ΔNPxY2 Tieren nachgewiesen. Zusammengefasst, demonstrieren diese Ergebnisse, dass LRP1 eine kritische Rolle in der Regulierung der NR2B-Expression an der Zelloberfläche spielt.

Impiego di ingredienti funzionali nel rallentamento del raffermamento in prodotti da forno

ALMA MASTER STUDIORUM - UNIVERSITÀ DI BOLOGNA CAMPUS DI CESENA SCUOLA DI AGRARIA E MEDICINA VETERINARIA CORSO DI LAUREA IN SCIENZE E TECNOLOGIE ALIMENTARI Impiego di ingredienti funzionali nel rallentamento del raffermamento in prodotti da forno Relazione finale in Tecnologia dei Cereali e Derivati Relatore Dr. Giangaetano Pinnavaia Correlatrice Dr.ssa Federica Balestra Presentato da Caterina Azzarone Sessione II° Anno Accademico 2014/2015 Introduzione La focaccia è un prodotto lievitato da forno molto diffuso e consumato in tutta Italia. Essendo un prodotto fresco è soggetta al raffermamento. Lo scopo della sperimentazione è stato quello di valutare l’influenza di un amido waxy e di un enzima sulle caratteristiche chimico-fisiche e sensoriali di un prodotto da forno tipo focaccia durante lo stoccaggio. Materiali e metodi Le focacce sono state realizzate addizionando alla formulazione degli ingredienti in grado di contrastare il fenomeno del raffermamento: il Panenzyme AM 100 allo 0,005% (E5)e 0,01%(E10); e il Novation TM 2700 (amido di mais waxy) al 2.5%(N2.5) e 5%(N5). I campioni sono stati posti a confronto con un campione di controllo (C) I campioni sono stati stoccati in cella termostatata a 5C° e 50% UR. Le analisi sono state effettuate rispettivamente dopo 1,2,3,7 e 10 giorni dalla preparazione. Sull’impasto è stato valutato lo sviluppo in volume ogni 30 minuti durante la lievitazione (2h) a 36C° e 86% UR. Sulle focacce sono state effettuate le seguenti determinazioni analitiche: • Analisi dei gas nello spazio di testa delle confezioni. • La determinazione dell’umidità • Texture Profile Analysis (TPA) test • Test di rilassamento (Hold until Time test) • L’analisi sensoriale effettuata sia dopo 1 giorno (T1) sia dopo 10 giorni di conservazione (T10). Conclusioni In particolare, il campione addizionato con enzima in percentuale dello 0,005% (E5) mostra le caratteristiche chimico-fisiche migliori al termine del periodo di conservazione, presentando il valore più elevato di umidità, il valore inferiore di durezza e maggiore di elasticità valutati strumentalmente. Anche a livello sensoriale il campione E5 presenta punteggi molto elevati. Sono state trovate, inoltre, interessanti correlazioni tra i dati dell’analisi sensoriale e quelli ottenuti dai test strumentali. Il campione realizzato con il 2.5% di amido di mais waxy (N2.5) nonostante abbia presentato a fine conservazione valori di umidità e di elasticità inferiori e risultasse più duro rispetto al campione di controllo (C), ha ottenuto i punteggi più elevati nel test sensoriale, mentre nei confronti del campione con una percentuale maggiore di amido di mais waxy (N5) è risultato migliore per tutti i parametri valutati. Si deduce che l’utilizzo di NOVATION 2007 al 2.5% e PANEENZYME AM100 allo 0,005% sono stati in grado di migliorare le caratteristiche strutturali e sensoriali del prodotto durante la conservazione, risultando il secondo il migliore in assoluto

Intracranial Hemorrhage, Outcome, and Mortality After Intra-Arterial Therapy for Acute Ischemic Stroke in Patients Under Oral Anticoagulants

Use of intravenous tissue-type plasminogen activator (IV tPA) for acute ischemic stroke is restricted to patients with an international normalized ratio (INR) less than 1.7. However, a recent study showed increased risk of symptomatic intracranial hemorrhage after IV tPA use in patients with oral anticoagulants (OAC) even with an INR less than 1.7. The present study assessed the risk of symptomatic intracranial hemorrhage, clinical outcome, and mortality after intra-arterial therapy (IAT) in patients with and without previous use of OAC.

Histamine increases sphingosine kinase-1 expression and activity in the human arterial endothelial cell line EA.hy 926 by a PKC-alpha-dependent mechanism

Sphingosine 1-phosphate (S1P) is a potent mitogenic signal generated from sphingosine by the action of sphingosine kinases (SKs). In this study, we show that in the human arterial endothelial cell line EA.hy 926 histamine induces a time-dependent upregulation of the SK-1 mRNA and protein expression which is followed by increased SK-1 activity. A similar upregulation of SK-1 is also observed with the direct protein kinase C activator 12-O-tetradecanoylphorbol-13-acetate (TPA). In contrast, SK-2 activity is not affected by neither histamine nor TPA. The increased SK-1 protein expression is due to stimulated de novo synthesis since cycloheximide inhibited the delayed SK-1 protein upregulation. Moreover, the increased SK-1 mRNA expression results from an increased promoter activation by histamine and TPA. In mechanistic terms, the transcriptional upregulation of SK-1 is dependent on PKC and the extracellular signal-regulated protein kinase (ERK) cascade since staurosporine and the MEK inhibitor U0126 abolish the TPA-induced SK-1 induction. Furthermore, the histamine effect is abolished by the H1-receptor antagonist diphenhydramine, but not by the H2-receptor antagonist cimetidine. Parallel to the induction of SK-1, histamine and TPA stimulate an increased migration of endothelial cells, which is prevented by depletion of the SK-1 by small interfering RNA (siRNA). To appoint this specific cell response to a specific PKC isoenzyme, siRNA of PKC-alpha, -delta, and -epsilon were used to selectively downregulate the respective isoforms. Interestingly, only depletion of PKC-alpha leads to a complete loss of TPA- and histamine-triggered SK-1 induction and cell migration. In summary, these data show that PKC-alpha activation in endothelial cells by histamine-activated H1-receptors, or by direct PKC activators leads to a sustained upregulation of the SK-1 protein expression and activity which, in turn, is critically involved in the mechanism of endothelial cell migration.

Early recurrent ischemic stroke in stroke patients undergoing intravenous thrombolysis

BACKGROUND: We assessed the incidence of early recurrent ischemic stroke in stroke patients treated with intravenous tissue-type plasminogen activator (tPA) and the temporal pattern of its occurrence compared with symptomatic intracranial hemorrhage (ICH). METHODS AND RESULTS: Prospectively collected, population-based data for 341 consecutive acute stroke patients (62% men; mean age, 66 years) treated with tPA according to the National Institute of Neurological Disorders and Stroke study protocol at 8 medical centers in Switzerland (3 academic and 5 community) between January 2001 and November 2004 were retrospectively analyzed. The primary outcome measure was neurological deterioration > or = 4 points on the National Institutes of Health Stroke Scale occurring within 24 hours of tPA treatment and caused either by recurrent ischemic stroke (defined as the occurrence of new neurological symptoms suggesting involvement of initially unaffected vascular territories and evidence of corresponding ischemic lesions on cranial computed tomography scans, in the absence of ICH) or by ICH. Early recurrent ischemic stroke was diagnosed in 2 patients (0.59%; 95% confidence interval, 0.07% to 2.10%) and symptomatic ICH in 15 patients (4.40%; 95% confidence interval, 2.48% to 7.15%). Both recurrent ischemic strokes occurred during thrombolysis, whereas symptomatic ICHs occurred 2 to 22 hours after termination of tPA infusion. CONCLUSIONS: Recurrent ischemic stroke is a rare cause of early neurological deterioration in acute stroke patients undergoing intravenous thrombolysis, with a different temporal pattern compared with that of symptomatic ICH.