Diurnal inhibition of NMDA-EPSCs at rat hippocampal mossy fibre synapses through orexin-2 receptors.

Diurnal release of the orexin neuropeptides orexin-A (Ox-A, hypocretin-1) and orexin-B (Ox-B, hypocretin-2) stabilises arousal, regulates energy homeostasis and contributes to cognition and learning. However, whether cellular correlates of brain plasticity are regulated through orexins, and whether they do so in a time-of-day-dependent manner, has never been assessed. Immunohistochemically we found sparse but widespread innervation of hippocampal subfields through Ox-A- and Ox-B-containing fibres in young adult rats. The actions of Ox-A were studied on NMDA receptor (NMDAR)-mediated excitatory synaptic transmission in acute hippocampal slices prepared around the trough (Zeitgeber time (ZT) 4-8, corresponding to 4-8 h into the resting phase) and peak (ZT 23) of intracerebroventricular orexin levels. At ZT 4-8, exogenous Ox-A (100 nm in bath) inhibited NMDA receptor-mediated excitatory postsynaptic currents (NMDA-EPSCs) at mossy fibre (MF)-CA3 (to 55.6 ± 6.8% of control, P = 0.0003) and at Schaffer collateral-CA1 synapses (70.8 ± 6.3%, P = 0.013), whereas it remained ineffective at non-MF excitatory synapses in CA3. Ox-A actions were mediated postsynaptically and blocked by the orexin-2 receptor (OX2R) antagonist JNJ10397049 (1 μm), but not by orexin-1 receptor inhibition (SB334867, 1 μm) or by adrenergic and cholinergic antagonists. At ZT 23, inhibitory effects of exogenous Ox-A were absent (97.6 ± 2.9%, P = 0.42), but reinstated (87.2 ± 3.3%, P = 0.002) when endogenous orexin signalling was attenuated for 5 h through i.p. injections of almorexant (100 mg kg(-1)), a dual orexin receptor antagonist. In conclusion, endogenous orexins modulate hippocampal NMDAR function in a time-of-day-dependent manner, suggesting that they may influence cellular plasticity and consequent variations in memory performance across the sleep-wake cycle.

THE USEFUL SIDE OF AMBIVALENCE: Ambivalent attitudes can be adaptive and socially valued

En s'inspirant de la littérature récente qui a dépeint l'ambivalence comme étant adaptative et en lien avec des comportements stratégiques, cette thèse examine le versant utile des attitudes ambivalentes. Elle met tout d'abord en évidence que son expression peut-être sciemment contrôlée et mise en avant pour des raisons d'auto-présentation. De plus, elle démontre que les individus peuvent présenter une attitude ambivalente afin de gagner l'approbation sociale sur un objet d'attitude controversé alors que l'inverse a été observé sur des objets consensuels (Première ligne de recherche). Cette thèse a également révélé que l'expression d'attitudes ambivalentes pouvait amener à être valorisé socialement. En effet, contrairement à des attitudes plus tranchées (pro-normatives ou contre-normatives), les attitudes ambivalentes ont été évaluées de façon plus importante sur la dimension de l'utilité sociale (une dimension qui indique la compétence d'autrui ou encore la propension à évoluer dans la hiérarchie sociale). La valorisation de l'ambivalence n'est apparue que sur la dimension de l'utilité sociale et non sur la dimension de la désirabilité sociale (une dimension qui indique la sympathie d'autrui ainsi que la propension à être apprécié socialement). De plus, ce résultat a été observé sur des thèmes controversés et non sur des thèmes consensuels (Seconde ligne de recherche). Dans l'ensemble cette thèse soutient une approche de l'ambivalence comme donnant lieu à des bénéfices. Elle peut également ouvrir la voie à l'étude de l'ambivalence en lien avec la pensée critique. - Drawing on the recent literature that portrayed ambivalence as being adaptive and linked with strategic behaviors, this thesis examines the useful side of ambivalent attitudes. It first revealed that the expression of ambivalent attitudes could be controlled and purposely displayed for self-presentational concerns. Furthermore, it demonstrated that people could put ambivalence forward to gain social approval when expressing it on controversial social issues, whereas the opposite was true on consensual social issues (First line of research). The thesis also revealed that the expression of ambivalent attitudes could lead to be socially valued. Indeed, contrary to clear-cut attitudes (either pro-normative or counter-normative attitudes), ambivalent attitudes have been evaluated the highest on the social utility dimension (a dimension indicating people's competence as well as the extent to which they are likely to climb in social hierarchy). The valorization of ambivalent attitudes only appeared on social utility and not on social desirability (a dimension indicating people's niceness as well as the extent to which they are likely to be socially appreciated). This effect was true on controversial social issues but not on consensual ones (Second line of research). Overall, this thesis provides support for an approach that conceives attitudinal ambivalence as leading to benefits. It also may open avenues for the study of ambivalence in relation with critical thinking.

The ager tarraconensis project (right side of river Francoli) (PAT): the application of geophysical survey to identify rural Roman settlement typologies

The methodology of the ager Tarraconensis project also included geophysical surveys aiming to distinguish different categories of rural settlements. Two geophysical techniques (resistivity and magnetometry) were combined to reveal traces of unearth structures from a selection of sites identified from the field survey. Results of geophysical surveys of these seven sites as well as conclusions obtained from this approach are discussed here.

Iontophoresis: from the lab to the bed side.

Pioneer work on iontophoresis undertaken by David Maurice during the 1970s and 1980s laid the initial groundwork for its potential implementation as a promising ocular therapeutic modality. A better understanding of tissue interactions within the eye during electric current application, along with better designs of drug delivery devices have enabled us to pursue David Maurice's original ideas and take them from the bench to the bed side. In the present study we demonstrate the potential application of an iontophoresis device (Eyegate, Optis, France) for the treatment of certain human eye diseases. Seventeen patients received a penetrating keratoplasty (PKP) at various intervals before presentation with active graft rejection in our clinic and were treated using this iontophoresis device. Methylprednisolone sodium succinate (MP) 62.5 mg/ml was infused within the Eyegate ocular probe container and an electrical current of 1.5 mA was delivered for 4 min with the negative pole connected to the ocular probe. Patients were treated on an ambulatory basis and received a standard course of three iontophoresis applications given once a day over 3 consecutive days. After treatment, 15 of the 17 treated eyes (88%) demonstrated a complete reversal of the rejection processes. In two eyes, only a partial and temporary improvement was observed. The mean best corrected visual acuity of all 17 patients during the last follow up visit was 0.37 +/- 0.2 compared to 0.06 +/- 0.05 before initiation of the iontophoresis treatment. The mean follow-up time was 13.7 months with a range of 5-29 months for the 17 patients. No significant side-effects associated with the iontophoresis treatment were observed. Thus, for the management of active corneal graft rejection, iontophoresis of MP can be an alternative to very frequent instillations of eye drops, or to pulsed intravenous therapy of corticosteroids.

Total hip replacement with a collarless polished cemented anatomic stem: clinical and gait analysis results at ten years follow-up.

PURPOSE: The aim of this study was to determine outcomes of total hip replacement (THR) with the Lemania cemented femoral stem. METHODS: A total of 78 THR patients were followed and compared to 17 "fit", healthy, elderly and 72 "frail" elderly subjects without THR, using clinical outcome measures and a portable, in-field gait analysis device at five and ten years follow-up. RESULTS: Forty-one patients (53%), mean age 83.4 years, available at ten years follow-up, reported very good to excellent satisfaction. Mean Harris Hip and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) scores were 81.2 and 10.5 points, respectively, with excellent radiological preservation of proximal femur bone stock. Spatial and temporal gait parameters were close to the fit group and better than the frail group. CONCLUSIONS: Lemania THR demonstrated very good, stable clinical and radiological results at ten years in an older patient group, comparable to other cemented systems for primary THR. Gait analysis confirmed good walking performance in a real-life environment.

Origin of needle fibre calcite (NFC) : a geochemical approach

ABSTRACTNeedle fibre calcite (NFC) is one of the most widespread habits of pedogenic calcite. It is a monocrystal of calcite, in the shape of a needle, with a diameter of one micron and a length between 4 and 103 times its width. NFC occurs in soils with different macroscopic and microscopic morphologies. Macroscopically, two main habits of NFC exist: "cotton ball'Mike clusters and as "powder" coating on pebbles inside the soil. It can also act as nucleation sites for precipitation of calcite cements of purely physicochemical origin (LCC - Late Calcitic Cement). Although many studies have been conducted on needle fibre calcite, its origin remains a subject of debate. The NFC having never been reproduced in the laboratory whatever the considered approach, the processes responsible for its precipitation as a so particular morphology remain unexplained. The shift between the length orientation of the needle crystal and the normal axis of calcite growth (c-axis) is also unresolved.Samples taken in two soils observed in quarries (Villiers and Savagnier) in the Swiss Jura Mountains are used to investigate the processes involved in the formation of these calcite crystals in pedogenic environments. Three groups of microscopic morphologies are distinguished: (i) simple needles (SN), (ii) simple needles with overgrowths (SNO), and (iii) simple needles with nanofibres (SNN), nanofibres being either organic or mineral in nature. These groups correspond to different stages in the formation and evolution of NFC.Comparison of carbon and oxygen isotope compositions of NFC with LCC, in relationship with the composition of the carbonate host rock (CHR), and the carbon isotope signature of dissolved inorganic carbon (DIC) from the soil waters, indicates that both NFC and LCC are precipitated in isotopic equilibrium with the soil solution. Similar Ô13C and Ô180 values of the elongated NFC and the rhombohedral calcite crystals of the LCC suggest that the precipitation of these different calcite habits is not due to changes in physicochemical conditions. The growth of NFC crystals inside an organic mould formed by the fungal hyphae could explain the formation of calcite ciystals in the shape of a needle in isotopic equilibrium with the local environment.Strontium and calcium isotope compositions of the three microscopic groups of NFC and LCC were also studied, in order to determine the origin of calcium (Ca2+) entrapped in the calcite lattice and to elucidate the processes responsible for the precipitation of NFC. The 87Sr/86Sr ratio of the SN is closer to the 87Sr/86Sr ratio of the carbonate host rock than the LCC, SNO, and SNN. This could be another clue for the formation of SN inside fungal hyphae, because fungi are known to dissolve the rocks to release and translocate through their hyphae nutrients necessary for their growth. SN and SNN are depleted in Sr and enriched in ^Ca compared to the LCC. In the context of Villiers quarry, where the two ciystal shapes precipitate at similar temperature (in a range of 0,6°C), such variations are the result of a slower precipitation rate of NFC, which is inconsistent with a purely physicochemically precipitated elongate crystal.Finally, NFC is enriched in major and trace elements (i.e. Fe, Zn, Cu, and Mo) compared to the LCC. This enrichment is ascribed to modification in precipitation processes between the NFC and LCC. Right now, it is not possible to preclude the influence of the particular shape of NFC or the biological influence. REEs are not fractionated in NFC, contrary to LCC. Thus, NFC does not precipitate from a percolation solution circulating downward the soil, which should lead to the fractionation of the REEs. As explained above, fungi, are able to dissolve and translocate nutrients. This kind of processes allows releasing elements in the soil solution without fractionation and could explain the particular chemical signature of NFC regarding the REEs.The geochemical approach to investigate the origin of NFC presented in this study does not allow providing direct clues to the fungal origin of NFC, but brings several new insights in the understanding of the formation of such a particular mineral, calcite needles, by precluding definitively their physicochemical origin.RESUMELa calcite en aiguilles (NFC) est l'une des formes les plus ubiquiste de calcite pédogénique. Il s'agit d'un monocrystal de calcite d'un diamètre d'un micron et d'une longueur 4 à 102 fois supérieure à sa largeur. A l'échelle macroscopique, la NFC a été observée sous deux principaux aspects : l'une « cotonneuse » et l'autre formant un mince croûte autour des graviers du sol. La NFC peut également servir de support à la nucléation de ciments secondaires précipités de manière purement physico-chimique (LCC). Malgré les nombreuses études menées sur la NFC, son origine demeure encore inconnue. A ce jour, aucune expérience en laboratoire n'a permis de créer de la calcite en aiguilles, et ce, quelque soit l'approche abordée. Par conséquent, les processus précis responsables de la précipitation calcite avec une telle morphologie restent inconnus. Le décalage existant entre l'axe d'allongement des aiguilles de calcite et l'axe normal de croissance de la calcite (axe c) reste inexpliqué.Des échantillons de NFC, LCC, roche mère, eau de pluie des différents horizons du sol ont été prélevés principalement au front de deux carrières de graviers, ainsi que dans un profil de sol adjacent à ces carrières, dans le but de mieux comprendre les processus à l'origine de la précipitation de calcite en forme d'aiguille. Trois micro-morphologies ont été distinguées: les aiguilles simples (SN), les aiguilles simples avec surcroissances calcitiques (SNO) et enfin les aiguilles simples avec nanofibres (SNN), celles-ci pouvant être de minérales ou organiques. Ces groupes, d'après nos résultats et les études antérieures pourraient correspondre à différentes étapes de formation de la calcite en aiguilles.Dans un premier temps, la comparaison des signatures isotopiques de la calcite en aiguilles, du LCC, de la roche mère et du carbone inorganique dissout dans la solution du sol (CID) indique que la NFC, tout comme le LCC, précipite en équilibre avec la solution du sol. Les valeurs similaires en Ô13C et δ180 de cristaux de calcite allongés (NFC) et rhombohédriques (LCC) formés dans un même milieu suggère que ces différences morphologiques ne peuvent pas être attribuées à des modifications purement physico-chimiques. La croissance de NFC à l'intérieur d'un moule organique comme les hyphes de champignons semble être la seule hypothèse plausible permettant d'expliquer la formation de monocrystaux allongés de calcite en équilibre avec leur environnement.La composition isotopique en strontium (Sr) et calcium (Ca) des LCC et des trois micro¬morphologies de la NFC ont été étudiées également, afin de déterminer l'origine du Ca2+ présent dans le réseau cristallin de la calcite en aiguilles, ainsi que les processus responsables de la formation de NFC. Les valeurs du rapport 87Sr/86$r de la forme SN sont les plus proches de celles de la roche mère par rapport aux formes SNN et SNO et du LCC. Ceci pourrait être un nouvel indice de l'implication des champignons dans la précipitation de calcite en aiguilles, puisqu'ils sont connus pour avoir la capacité de dissoudre les roches afin de libérer les nutriments nécessaires à leur croissance, ainsi que de les transloquer par leurs hyphes. De plus, les formes SN et SNN sont appauvries en Sr et enrichies en "Ca, comparativement au LCC. Dans le sol étudié, tous les carbonates de calcium précipitent à la même température, par conséquent, de telles variations sont dues à un taux de précipitation plus lent de SN et SNN, ce qui est contradictoire avec l'hypothèse physico-chimique. Pour finir, la NFC est enrichie en certains éléments majeurs et traces (i.e. Fe, Zn, Cu et Mo) par rapport au LCC. Ceci peut être attribué à différents processus de formation entre la NFC et le LCC. Pour le moment il est impossible d'exclure l'influence de la forme particulière de la NFC ou celle du champignon. Les terres rares (REEs) ne sont pas fractionnées dans la NFC, contrairement au LCC. Ceci peut être expliqué par le fait que la NFC précipite à partir d'une solution qui n'a pas percolé à travers le sol. Les champignons en dissolvant les roches mettent en solution éléments sans les fractionner. L'approche géochimique de l'étude de la calcite en aiguilles ne permets pas de produire des preuves directes sur sa potentielle origine fongique, mais permet de mieux comprendre comment un minéral aussi singulier que la NFC peut se former. D'autre pare cette étude permets d'exclure définitivement l'hypothèse physico-chimique de l'origine de la calcite en aiguilles

The stereochemistry of the amino acid side chain influences the inflammatory potential of muramyl dipeptide in experimental meningitis.

Intrathecal injections of 50 to 100 micro g of (N-acetylmuramyl-L-alanyl-D-isoglutamine) muramyl dipeptide (MDP)/rabbit dose-dependently triggered tumor necrosis factor alpha (TNF-alpha) secretion (12 to 40,000 pg/ml) preceding the influx of leukocytes in the subarachnoid space of rabbits. Intrathecal instillation of heat-killed unencapsulated R6 pneumococci produced a comparable leukocyte influx but only a minimal level of preceding TNF-alpha secretion. The stereochemistry of the first amino acid (L-alanine) of the MDP played a crucial role with regard to its inflammatory potential. Isomers harboring D-alanine in first position did not induce TNF-alpha secretion and influx of leukocytes. This stereospecificity of MDPs was also confirmed by measuring TNF-alpha release from human peripheral mononuclear blood cells stimulated in vitro. These data show that the inflammatory potential of MDPs depends on the stereochemistry of the first amino acid of the peptide side chain and suggest that intact pneumococci and MDPs induce inflammation by different pathways.

Development of Craniofacial Bone Defect Reconstruction Implant Based on Fibre-Reinforced Composite with Photopolymerisable Resin Systems. Experimental studies in vitro and in vivo.

Reconstruction of defects in the craniomaxillofacial (CMF) area has mainly been based on bone grafts or metallic fixing plates and screws. Particularly in the case of large calvarial and/or craniofacial defects caused by trauma, tumours or congenital malformations, there is a need for reliable reconstruction biomaterials, because bone grafts or metallic fixing systems do not completely fulfill the criteria for the best possible reconstruction methods in these complicated cases. In this series of studies, the usability of fibre-reinforced composite (FRC) was studied as a biostable, nonmetallic alternative material for reconstructing artificially created bone defects in frontal and calvarial areas of rabbits. The experimental part of this work describes the different stages of the product development process from the first in vitro tests with resin-impregnated fibrereinforced composites to the in vivo animal studies, in which this FRC was tested as an implant material for reconstructing different size bone defects in rabbit frontal and calvarial areas. In the first in vitro study, the FRC was polymerised in contact with bone or blood in the laboratory. The polymerised FRC samples were then incubated in water, which was analysed for residual monomer content by using high performance liquid chromatography (HPLC). It was found that this in vitro polymerisation in contact with bone and blood did not markedly increase the residual monomer leaching from the FRC. In the second in vitro study, different adhesive systems were tested in fixing the implant to bone surface. This was done to find an alternative implant fixing system to screws and pins. On the basis of this study, it was found that the surface of the calvarial bone needed both mechanical and chemical treatments before the resinimpregnated FRC could be properly fixed onto it. In three animal studies performed with rabbit frontal bone defects and critical size calvarial bone defect models, biological responses to the FRC implants were evaluated. On the basis of theseevaluations, it can be concluded that the FRC, based on E-glass (electrical glass) fibres forming a porous fibre veil enables the ingrowth of connective tissues to the inner structures of the material, as well as the bone formation and mineralization inside the fibre veil. Bone formation could be enhanced by using bioactive glass granules fixed to the FRC implants. FRC-implanted bone defects healed partly; no total healing of defects was achieved. Biological responses during the follow-up time, at a maximum of 12 weeks, to resin-impregnated composite implant seemed to depend on the polymerization time of the resin matrix of the FRC. Both of the studied resin systems used in the FRC were photopolymerised and the heat-induced postpolymerisation was used additionally.

CO2 Laser Cutting of Particleboard, HDF and MDF

The purpose of this thesis is to reveal how the laser cutting parameters influence lasercutting of particleboard, HDF and MDF. The literature review introduces the basic principle of CO2 laser, CO2 laser equipment and its usage in cutting of wood-based materials. The experimental part focuses on the discussion and analysis ofthe test data and attempts to draw conclusions on the influence of various parameters, including laser power, focal length of the lens and cutting gas, on the cutting speed and kerf quality. The tested materials include various thicknesses of particleboard, HDF and MDF samples. A TRUMPF TLF2700 HQ laser equipment was used for the experiments. To obtain valid data, the test samples must be completely cut through without any bonding of wood fibre. The maximum cutting speed is linear dependent on the laser power in thecondition that the other parameters are constant. For each thickness of a specific material type, there is a minimum laser power for cutting. Normally, the topand bottom kerf widths increase with the enhancement of laser power. There may be a critical laser power which can generate the minimum cross-sectional kerf width. Lens of larger focal length may achieve higher cutting speed. As the focal length becomes larger, the top kerf width tends to increase while the bottom andcross-sectional kerf widths to the opposite. Of all cutting gases, oxygen can help achieve higher cutting speed. The gas pressure of nitrogen does not seem to have strong influence on the cutting result. Generally, 2 bar air is more preferable for higher cutting speed. For particleboard and MDF samples of larger thickness than 12 mm, 2 bar argon can be used to reach remarkably higher cutting speed than the 5 bar. Generally, the 190.5 mm lens can produce smallest total kerf width. The kerf sides of thicker samples are darker than the thinner ones. The sample darkness tends to be lower as laser power increased. 63.5 mm lens seemed tocause more darkness than other lens. 5 bar cutting gases can produce less dark side kerfs than 2 bar ones. Oxygen normally causes darker kerfs than other gases. No distinct differences were found between nitrogen and argon.

Paediatric bi-ventricular external assist device based on artificial muscles

Objective: Existing VADs are single-ventricle pumps needing anticoagulation. We developed a bi ventricular external assist device that reproduces the physiological heart muscle movement completely avoiding anticoagulants. Methods: The device has a carbon fibre skeleton fitting a 30-40 kg patient's heart, to which a Nitinol based artificial muscle is connected. The artificial muscle wraps both ventricles. The strength of the Nitinol fibres is amplified by a pivot articulation in contact with the ventricle wall. The fibres are electrically driven and a dedicated control unit has been developed. We assessed hemodynamic performances of this device using a previously described dedicated bench test. Volume ejected and pressure gradient has been measured with afterload ranging from 25 to 50mmHg. Results: With anafterload of 50mmHg the system has an ejection fraction (EF) of 10% on the right side and 8% on the left side. The system is able to generate a systolic ejection of 5,5 ml on the right side and 4,4 ml on the left side. With anafterload of 25mmHg the results are reduced of about 20%. The activation frequency is 80/minute resulting in a total volume displacement of 440 ml/minute on the right side and 352 ml/minute on the left side. Conclusions: The artificial muscle follows Starling's law as the ejected volume increases when afterload increases. These preliminary studies confirmed the possibility of improving the EF of a failing heart using artificial muscle for external cardiac compression. This device could be helpful in weaning CPB and/or for short-term cardio-circulatory support in paediatric population with cardiac failure.

1,2-Dimethylindole-3-sulfonyl (MIS) as protecting group for the side chain of arginine

The protection of arginine (Arg) side chains is a crucial issue in peptide chemistry because of the propensity of the basic guanidinium group to produce side reactions. Currently, sulfonyl-type protecting groups, such as 2,2,5,7,8-pentamethylchroman (Pmc) and 2,2,4,6,7-pentamethyldihydrobenzofurane (Pbf), are the most widely used for this purpose. Nevertheless, Arg side chain protection remains problematic as a result of the acid stability of these two compounds. This issue is even more relevant in Arg-rich sequences, acid-sensitive peptides and large-scale syntheses. The 1,2-dimethylindole-3-sulfonyl (MIS) group is more acid-labile than Pmc and Pbf and can therefore be a better option for Arg side chain protection. In addition, MIS is compatible with tryptophan-containing peptides.