Disentangling water usage in the European Union: A decomposition analysis

The Water Framework Directive (WFD) defines common objectives for water resources throughout the European Union (EU). Given this general approach to water preservation and water policy, the objective of this paper is to analyse whether common patterns of water consumption exist within Europe. In particular, our study uses two methods to reveal the reasons behind sectoral water use in all EU countries. The first method is based on an accounting indicator that calculates the water intensity of an economy as the sum of sectoral water intensities. The second method is a subsystem input‐output model that divides total water use into different income channels within the production system. The application uses data for the years 2005 and 2009 on water consumption in the production system of the 27 countries of the EU. From our analysis it emerges that EU countries are characterized by very different patterns of water consumption. In particular water consumption by the agriculture sector is extremely high in Central/Eastern Europe, relative to the rest of Europe. In most countries, the water used by the fuel, power and water sector is consumed to satisfy domestic final demand. However, our analysis shows that for some countries exports from this sector are an important driver of water consumption. Focusing on the agricultural sector, the decomposition analysis suggests that water usage in Mediterranean countries is mainly driven by final demand for, and exports of, agricultural products. In Central/Eastern Europe domestic final demand is the main driver of water consumption, but in this region the proportion of water use driven by demand for exports is increasing over time. Given these heterogeneous water consumption patterns, our analysis suggests that Mediterranean and Central/Eastern European countries should adopt specific water policies in order to achieve efficient levels of water consumption in the European Union. JEL codes: N5; C67 Keywords: Water use, Subsystem input–output model; Water intensity, European Union.

European Integration Without EU Membership : Models, Experiences, Perspectives

At the beginning of the 1990s, the concept of "European integration" could still be said to be fairly unambiguous. Nowadays, it has become plural and complex almost to the point of unintelligibility. This is due, of course, to the internal differentiation of EU membership, with several Member States pulling out of key integrative projects such as establishing an area without frontiers, the "Schengen" area, and a common currency. But this is also due to the differentiated extension of key integrative projects to European non-EU countries - Schengen is again a case in point. Such processes of "integration without membership", the focus of the present publication, are acquiring an ever-growing topicality both in the political arena and in academia. International relations between the EU and its neighbouring countries are crucial for both, and their development through new agreements features prominently on the continent's political agenda. Over and above this aspect, the dissemination of EU values and standards beyond the Union's borders raises a whole host of theoretical and methodological questions, unsettling in some cases traditional conceptions of the autonomy and separation of national legal orders. This publication brings together the papers presented at the Integration without EU Membership workshop held in May 2008 at the EUI (Max Weber Programme and Department of Law). It aims to compare different models and experiences of integration between the EU, on the one hand, and those European countries that do not currently have an accession perspective on the other hand. In delimiting the geographical scope of the inquiry, so as to scale it down to manageable proportions, the guiding principles have been to include both the "Eastern" and "Western" neighbours of the EU, and to examine both structured frameworks of cooperation, such as the European Neighbourhood Policy and the European Economic Area, and bilateral relations developing on a more ad hoc basis. These principles are reflected in the arrangement of the papers, which consider in turn the positions of Ukraine, Russia, Norway, and Switzerland in European integration - current standing, perspectives for evolution, consequences in terms of the EU-ization of their respective legal orders1. These subjects are examined from several perspectives. We had the privilege of receiving contributions from leading practitioners and scholars from the countries concerned, from EU highranking officials, from prominent specialists in EU external relations law, and from young and talented researchers. We wish to thank them all here for their invaluable insights. We are moreover deeply indebted to Marise Cremona (EUI, Law Department, EUI) for her inspiring advice and encouragement, as well as to Ramon Marimon, Karin Tilmans, Lotte Holm, Alyson Price and Susan Garvin (Max Weber Programme, EUI) for their unflinching support throughout this project. A word is perhaps needed on the propriety and usefulness of the research concept embodied in this publication. Does it make sense to compare the integration models and experiences of countries as different as Norway, Russia, Switzerland, and Ukraine? Needless to say, this list of four evokes a staggering diversity of political, social, cultural, and economic conditions, and at least as great a diversity of approaches to European integration. Still, we would argue that such diversity only makes comparisons more meaningful. Indeed, while the particularities and idiosyncratic elements of each "model" of integration are fully displayed in the present volume, common themes and preoccupations run through the pages of every contribution: the difficulty in conceptualizing the finalité and essence of integration, which is evident in the EU today but which is greatly amplified for non-EU countries; the asymmetries and tradeoffs between integration and autonomy that are inherent in any attempt to participate in European integration from outside; the alteration of deeply seated legal concepts, and concepts about the law, that are already observable in the most integrated of the non-EU countries concerned. These issues are not transient or coincidental: they are inextricably bound up with the integration of non-EU countries in the EU project. By publishing this collection, we make no claim to have dealt with them in an exhaustive, still less in a definitive manner. Our ambition is more modest: to highlight the relevance of these themes, to place them more firmly on the scientific agenda, and to provide a stimulating basis for future research and reflection.

Input diffusion and the evolution of production networks

What determines which inputs are initially considered and eventually adopted in the productionof new or improved goods? Why are some inputs much more prominent than others? We modelthe evolution of input linkages as a process where new producers first search for potentially usefulinputs and then decide which ones to adopt. A new product initially draws a set of 'essentialsuppliers'. The search stage is then confined to the network neighborhood of the latter, i.e., to theinputs used by the essential suppliers. The adoption decision is driven by a tradeoff between thebenefits accruing from input variety and the costs of input adoption. This has important implicationsfor the number of forward linkages that a product (input variety) develops over time. Inputdiffusion is fostered by network centrality ? an input that is initially represented in many networkneighborhoods is subsequently more likely to be adopted. This mechanism also delivers a powerlaw distribution of forward linkages. Our predictions continue to hold when varieties are aggregatedinto sectors. We can thus test them, using detailed sectoral US input-output tables. We showthat initial network proximity of a sector in 1967 significantly increases the likelihood of adoptionthroughout the subsequent four decades. The same is true for rapid productivity growth in aninput-producing sector. Our empirical results highlight two conditions for new products to becomecentral nodes: initial network proximity to prospective adopters, and technological progress thatreduces their relative price. Semiconductors met both conditions.

The Role of Railways in Export-Led Growth: The Case of Uruguay, 1870-1913

The social saving literature has highlighted the indispensable role that railways played before 1914 in several Latin American export-oriented economies, such as Mexico, Brazil and Argentina. The article analyses the case of Uruguay, a country that, by 1914, had built one of the densest railway networks in Latin America. The article shows that, in contrast to what happened in other economies of the region, the resource saving effects of the Uruguayan railways during the first globalisation were tiny due to the small share that railway output accounted for within the country's gross domestic product (GDP). Three complementary reasons are suggested to explain that result, namely: the geographical structure of the country; its sectoral specialisation; and the small scale of the Uruguayan economy. Due to these three characteristics, Uruguay was unable to benefit from railways in the way that other export-oriented Latin American economies did during the first period of globalisation. This conclusion draws attention to the geographic-specific character of railway technology.

How Important to a City Are Tourists and Daytrippers? The Economic Impact of Tourism on The City of Barcelona

In this paper, we devise a methodology that is able to objectively quantify the impact of tourism on the urban economy. This methodology takes various dimensions into account. First, to analyse the impact at sectoral level, it should bear in mind that tourism is a cross-sectional activity which affects many sectors, both directly and indirectly. Therefore, it is important to consider the impact of urban tourism on sectors traditionally defined as tourism-related, -that is, hotels, restaurants, shops, etc.- but also its impact on other sectors -for instance, textiles, food, construction, to name only a few- due to the intersectoral relationships that emerge. Second, we need to calculate the percentage of the turnover of each sector that is due to the tourism industry. Third, it is important to establish the geographic distribution of this impact: how is the effect shared between the city and its neighbouring areas QUESTION Finally, the effect of urban tourism should be quantified not only in terms of turnover, but also in terms of its contribution to GDP and employment.

Productivity and innovation spillovers: Micro evidence from Spain

This article analyses the impact that innovation expenditure and intrasectoral and intersectoral externalities have on productivity in Spanish firms. While there is an extensive literature analysing the relationship between innovation and productivity, in this particular area there are far fewer studies that examine the importance of sectoral externalities, especially with the focus on Spain. One novelty of the study, which covers the industrial and service sectors, is that we also consider jointly the technology level of the sector in which the firm operates and the firm size. The database used is the Technological Innovation Panel, PITEC, which includes 12,813 firms for the year 2008 and has been little used in this type of study. The estimation method used is Iteratively Reweighted Least Squares method, IRLS, which is very useful for obtaining robust estimations in the presence of outliers. The results confirm that innovation has a positive effect on productivity, especially in high-tech and large firms. The impact of externalities is more heterogeneous because, while intrasectoral externalities have a poitive and significant effect, especially in low-tech firms independently of size, intersectoral externalities have a more ambiguous effect, being clearly significant for advanced industries in which size has a positive effect.

The Transatlantic Productivity Gap : Is R&D the Main Culprit?

The literature has pointed to different causes to explain the productivity gap between Europe and United States in the last decades. This paper tests the hypothesis that the lower European productivity performance in comparison with the US can be explained not only by a lower level of corporate R&D investment, but also by a lower capacity to translate R&D investment into productivity gains. The proposed microeconometric estimates are based on a unique longitudinal database covering the period 1990-2008 and comprising 1.809 US and European companies for a total of 16.079 observations. Consistent with previous literature, we find robust evidence of a significant impact of R&D on productivity, however – using different estimation techniques - the R&D coefficients for the US firms always turn out to be significantly higher. To see to what extent these transatlantic differences may be related to the different sectoral structures in the US and the EU, we differentiated the analysis by sectors. The result is that both in manufacturing, services and high-tech sectors US firms are more efficient in translating their R&D investments into productivity increases.

The causal factors of international inequality in CO2 emissions per capita: a regression-based inequality decomposition analysis

This paper uses the possibilities provided by the regression-based inequality decomposition (Fields, 2003) to explore the contribution of different explanatory factors to international inequality in CO2 emissions per capita. In contrast to previous emissions inequality decompositions, which were based on identity relationships (Duro and Padilla, 2006), this methodology does not impose any a priori specific relationship. Thus, it allows an assessment of the contribution to inequality of different relevant variables. In short, the paper appraises the relative contributions of affluence, sectoral composition, demographic factors and climate. The analysis is applied to selected years of the period 1993–2007. The results show the important (though decreasing) share of the contribution of demographic factors, as well as a significant contribution of affluence and sectoral composition.

La gestión del regadío catalán: entre eficiencia, compatibilidad de usos y legitimidad

In previous years, irrigation and its management have become protagonists of a social debate that questions their economic, environmental and territorial limits in space and time. The hydraulic constructions as irrigation canals have played a central role in the attempt to “dominate” the water resources and so control the territory. However and after some time, both the modernization of traditional irrigation as the promotion of new irrigation projects are called into question due to the rise of environmental demands and promoting governance as a mechanism favourable to agreements between stakeholders. In Catalonia, the irrigation management must deal both efficiency requirements as to the compatibility between consumptive and non-consumptive water uses well as the social legitimacy of projects that exceed sectoral interest. The situation analysis of Bajo Ter and Muga historic irrigation canals and the running project of Segarra-Garrigues irrigation canal emphasize the need to promote a territorial management model capable of integrating and legitimize different competing water views

Analysis on firm innovation boundaries

Innovation has been widely recognized as an important driver of firm competitiveness, and the firm’s internal research and development (R&D) activities are often considered to have a critical role in innovation activities. Internal R&D is, however, not the source of innovation as firms may tap into knowledge necessary for innovation also through various types of sourcing agreements or by collaborating with other organizations. The objective of this study is to analyze the way firms go about organizing efficiently their innovation boundaries. Within this context, the analysis is focused, firstly, on the relation between innovation boundaries and firm innovation performance and, secondly, on the factors explaining innovation boundary organization. The innovation literature recognizes that the sources of innovation depend on the nature of technology but does not offer a sufficient tool for analyzing innovation boundary options and their efficiency. Thus, this study suggests incorporating insights from transaction cost economics (TCE) complemented with dynamic governance costs and benefits into the analysis. The thesis consists of two parts. The first part introduces the background of the study, research objectives, an overview of the empirical studies, and the general conclusions of the study. The second part is formed of five publications. The overall results firstly indicate that although the relation between firm innovation boundary options is partly industry sector-specific, the firm level search strategies and knowledge transfer capabilities are important for innovation performance independently of the sector. Secondly, the results show that the attributes suggested by TCE alone do not offer a sufficient explanation of innovation boundary selection, especially under conditions of high levels of (radical) uncertainty. Based on the results, the dynamic governance cost and benefit framework complements the static TCE when firm innovation boundaries are scrutinized.

Regional innovation strategies and sustainability in selected EU countries

This study focuses on regional innovation strategy (RIS) and sustainability aspects in selected regions of European Union (EU) countries. It is known that RIS helps a region to innovate locally and to compete globally and it is considered as one of the main policy tools of the EU for innovation support at a regional level. This study is conducted to explore the existence and adoption of RIS in different regions of selected EU countries, and to highlight and compare regional RIS characteristics. The study is also aimed at identifying the factors that characterise the formulation and implementation of RIS as well as the problems associated thereof. In this study, six regions of EU countries are considered: Päijät-Häme Region (Finland); London Region (United Kingdom); Mid-West Region (Ireland); Veneto Region (Italy); Eastern Region (Poland); and West Region (Romania). Data and information are collected by sending questionnaires to the respective regional authorities of these selected regions. Based on the gathered information and analysis, RIS or equivalent strategy document serves as a blueprint for forwarding innovative programmes towards regional sustainability. The objectives of RIS in these regions are found to be dependent on the priority sectors and state of the region’s development. The current environmental sustainability aspects are focused on eco-design, eco-products, and eco-innovation, although each region also has its own specific aspects supported by RIS. Likewise, regional policies typically follow the RIS yet translated in various sectoral focus or priority areas. The main enhancing factors supporting RIS among selected regions have some similarities and variations; among others, some regions are strongly supported by EU while others have support from own regional agencies, organisations and professional networks. RIS implementation is not without challenges and despite the differences in challenges, almost all of reviewed regions consider financial resource as a common problem. Generally, it is learned from this study that RIS and regional sustainability are reinforcing each other mutually. In this study, the strong focus is given towards environmental sustainability in the regions although regional sustainability also includes economic and social aspects. A well-focused and prioritised RIS is beneficial for regional sustainable development.

The Finnish Paper Workers' Union at a crossroads: Labor union representativeness in a changing environment, 1980-2008

This thesis consists of four articles and an introductory section. The main research questions in all the articles refer to the changes in the representativeness of the Finnish Paper Workers' Union. Representativeness stands for the entire entity of external, internal, legal and reputational factors that enable the labor union to represent its members and achieve its goals. This concept is based on an extensive reading of quantitative and qualitative industrial relations literature, which includes works based on Marxist labor-capital relations (such as Hyman's industrial relations studies), and more recent union density studies as well as gender- and ethnic diversity-based 'union revitalization' studies. Müller-Jentsch's German studies of industrial relations have been of particular importance as well as Streeck's industrial unionism and technology studies. The concept of representativeness is an attempt to combine the insights of these diverse strands of literature and bring the scientific discussion of labor unions back to the core of a union's function: representing its members. As such, it can be seen as a theoretical innovation. The concept helps to acknowledge both the heterogeneity of the membership and the totality of a labor union organization. The concept of representativeness aims to move beyond notions of 'power'. External representativeness can be expressed through the position of the labor union in the industrial relations system and the economy. Internal representativeness focuses on the aspects of labor unions that relate to the function of the union as an association with members, such as internal democracy. Legal representativeness lies in the formal legal position of the union – its rights and instruments. This includes collective bargaining legislation, co-decision rules and industrial conflict legislation. Reputational representativeness is related to how the union is seen by other actors and the general public, and can be approximated using data on strike activity. All these aspects of representativeness are path-dependent, and show the results of previous struggles over issues. The concept of representativeness goes beyond notions of labor union power and symbolizes an attempt to bring back the focus of industrial relations studies to the union's basic function of representing its members. The first article shows in detail the industrial conflict of the Finnish paper industry in 2005. The intended focus was the issue of gender in the negotiations over a new collective agreement, but the focal point of the industrial conflict was the issue of outsourcing and how this should be organized. Also, the issue of continuous shifts as an issue of working time was very important. The drawn-out conflict can be seen as a struggle over principles, and under pressure the labor union had to concede ground on the aforementioned issues. The article concludes that in this specific conflict, the union represented its' female members to a lesser extent, because the other issues took such priority. Furthermore, because of the substantive concessions. the union lost some of its internal representativeness, and the stubbornness of the union may have even harmed the reputation of the union. This article also includes an early version of the representativeness framework, through which this conflict is analyzed. The second article discusses wage developments, union density and collective bargaining within the context of representativeness. It is shown that the union has been able to secure substantial benefits for its members, regardless of declining employment. Collective agreements have often been based on centralized incomes policies, but the paper sector has not always joined these. Attention is furthermore paid to the changing competition of the General Assembly, with a surprisingly strong position of the Left Alliance still. In an attempt to replicate analysis of union density measures, an analysis of sectoral union density shows that similar factors as in aggregate data influence this measure, though – due to methodological issues – the results may not be robust. On this issue, it can be said that the method of analysis for aggregate union density is not suitable for sectoral union density analysis. The increasingly conflict-ridden industrial relations predicted have not actually materialized. The article concludes by asking whether the aim of ever-increasing wages is a sustainable one in the light of the pressures of globalization, though wage costs are a relatively small part of total costs. The third article discusses the history and use of outsourcing in the Finnish paper industry. It is shown using Hyman's framework of constituencies that over time, the perspective of the union changed from 'members of the Paper Workers' Union' to a more specific view of who is a core member of the union. Within the context of the industrial unionism that the union claims to practice, this is an important change. The article shows that the union more and more caters for a core group, while auxiliary personnel is less important to the union's identity and constituencies, which means that the union's internal representativeness has decreased. Maintenance workers are an exception; the union and employers have developed a rotating system that increases the efficient allocation of these employees. The core reason of the exceptional status of maintenance personnel is their high level of non-transferable skills. In the end it is debatable whether the compromise on outsourcing solves the challenges facing the industry. The fourth article shows diverging discourses within the union with regard to union-employer partnership for competitiveness improvements and instruments of local union representatives. In the collective agreement of 2008, the provision regulating wage effects of significant changes in the organization or content of work was thoroughly changed, though this mainly reflected decisions by the Labor Court on the pre-2008 version of the provision. This change laid bare the deep rift between the Social Democratic and Left Alliance (ex-Communist) factions of the union. The article argues that through the changed legal meaning of the provision, the union was able to transform concession bargaining into a basis for partnership. The internal discontent about this issue is nonetheless substantial and a threat to the unity of the union, both locally and at the union level. On the basis of the results of the articles, other factors influencing representativeness, such as technology and EU law and an overview of the main changes in the Finnish paper industry, it is concluded that, especially in recent years, the Finnish Paper Workers' Union has lost some of its representativeness. In particular, the loss of the efficiency of strikes is noted, the compromise on outsourcing which may have alienated a substantial part of the union's membership, and the change in the collective agreement of 2008 have caused this decline. In the latter case, the internal disunion on that issue shows the constraints of the union's internal democracy. Furthermore, the failure of the union to join the TEAM industrial union (by democratic means), the internal conflicts and a narrow focus on its own sector may also hurt the union in the future, as the paper industry in Finland is going through a structural change. None of these changes in representativeness would have been so drastic without the considerable pressure of globalization - in particular changing markets, changing technology and a loss of domestic investments to foreign investments, which in the end have benefited the corporations more than the Finnish employees of these corporations. Taken together, the union risks becoming socially irrelevant in time, though it will remain formally very strong on the basis of its institutional setting and financial situation.

Arthrogryposis in Murrah buffaloes in southern Brazil

Congenital arthrogryposis is described in a Murrah buffalo herd. The disease was characterized by curvature and multiple articular rigidity of the hindlimbs or of all limbs without associated defects except for one case of brachygnatia. Histologically there was reduction of motor neurons from the ventral horns of the spinal cord and hypoplasia of the limb muscles. Analysis of the herd breeding records suggests that the disease is genetically transmitted by an autosomal recessive trait.

Intersexuality in a crab-eating fox (Cerdocyon thous)

Intersexuality is a reproductive pathology that has been described in wild animals in recent years. However, its occurrence and consequences remain obscure and therefore all aspects of this reproductive disorder deserve attention. The aim of this study is to report a case of intersexuality with probable absence of gonadal tissue in the crab-eating fox (Cerdocyon thous) native to Brazil. The animal has male external genitalia, but its prepuce and penis were both hypoplastic. Because of a clinical suspicion of bilateral cryptorchidism, a laparotomy was performed and the absence of prostate and gonads were revealed. The procedure also revealed vas deferentia, extending laterally from the each side of the bladder basis to the right and left abdominal wall muscles. The animal died one month later, and post mortem examination confirmed the absence of prostatic and gonadal tissues. Muscular structures similar to uterine horns and cervix were founded macroscopically and confirmed by optic microscopy. In addition, post mortem findings corroborate with penis hypoplasia, since penile bone presence was observed. The vasa deferentia had a normal tissue structure, although hypoplastic. In conclusion, the case of a crab-eating fox (Cerdocyon thous) reported here represents a proved intersexual animal with probable absence of gonadal tissue.

Macroscopic description of teeth of Azara's agouti (Dasyprocta azarae)

The teeth of Azara's agouti (Dasyprocta azarae) were described macroscopically in order to provide biological data on one of the largest wild rodents of the Americas. Radiography was taken on six heads and the teeth were described. Enamel surrounds the coronal dentin, projects to the roots and is present as parallel inner laminae in buccolingual direction. The dentin is located among the enamel laminae and surrounds the pulp horns. The cementum is located internally to the enamel laminae. On the lingual surface, the cementum and dentin are the outer elements.