Lead poisoning in cattle grazing pasture contaminated by industrial waste

Lead poisoning is described in a herd of 120 Nelore cows of which 35 were affected. All affected cows died after a clinical course of 2-7 d with clinical signs related to cortical neurological disturbances. The source of Pb was fumes from a car battery recycling plant which has had a failure in its filtering system. Lead concentrations in liver and kidneys of 2 cows, in soil;and in grass where the cows were held were respective 39 to 431 ppm, 147 to 431 ppm,and 245ppm. No significant gross changes were observed. Histopathology revealed of neuronal necrosis, vacuolation of the neuropil and hypertrophy of the vascular endothelium inthecerebral cortices, degeneration of the epithelial cellsofrenal proximal tubules, and hemosiderosis of kidney, spleen and liver.

Mineral requirements for growth of Moxoto goats grazing in the semi-arid region of Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Stepping-motor-driven constant-shear-rate rotating viscometer

Despite the frequent use of stepping motors in robotics, automation, and a variety of precision instruments, they can hardly be found in rotational viscometers. This paper proposes the use of a stepping motor to drive a conventional constant-shear-rate laboratory rotational viscometer to avoid the use of velocity sensor and gearbox and, thus, simplify the instrument design. To investigate this driving technique, a commercial rotating viscometer has been adapted to be driven by a bipolar stepping motor, which is controlled via a personal computer. Special circuitry has been added to microstep the stepping motor at selectable step sizes and to condition the torque signal. Tests have been carried out using the prototype to produce flow curves for two standard Newtonian fluids (920 and 12 560 mPa (.) s, both at 25 degrees C). The flow curves have been obtained by employing several distinct microstep sizes within the shear rate range of 50-500 s(-1). The results indicate the feasibility of the proposed driving technique.

Avaliação da carga parasitária de helmintos e protozoários em bezerros manejados em sistema orgânico

The objective of this study was to evaluate the influence of helminths eggs and protozoan oocysts elimination in calves' feces kept in organic system production. The study was conducted from January 2008 to December 2009. Coproparasitological examinations were carried biweekly of 18 calves in pastures rotating system on Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) Agrobiology. The egg counting average data had been submitted to the Kruskal Willis test and the larvae counting percentile values to the qui-square test. The average counting of eggs per gram of faces (EGF) varied of 250 the 800, characterizing low and moderate infection. Animals with inferior age the six months had presented superior results of EGF (P <.05) to the ones of between six and twelve months age. The biggest degrees of infection had been observed in the late spring and summer. In the fecal examinations was identified the following helminths: Haemonchus (73%), Trichostrongylus (24%) and Oesophagostomum (3%). The practical handling adopted in organic system production had been capable to keep the animals in moderate levels of infection, being indicated that it had helmintoses control in rotating system of pastures.

Grazing time and milk production of crossbred cows in a rotational area of Elephant grass and Tanzania grass

This study was carried out in January of two consecutive years. The objective was to evaluate the grazing time, the grazing rate and the milk production of crossbred cows, managed in two rotational grazing areas, one with elephant grass (Pennisetum purpureum Schum. cv. Guaçu) and another one with Tanzania grass (Panicum maximum Jacq. cv. Tanzania), both with natural shade in the rest area. The experiment was divided in two phases, the first with 12 cows that remained day and night in the paddock and were milked twice a day. In the second phase 15 cows were observed and remained 10.43 hours in the paddock during the day, and were kept in a corral during the night. Each cow was observed every 15 minutes. Grass specie had no effect on milk production in the two phases of the experiment. The grazing time was 564 and 474 minutes and the grazing rate was 28.7 and 24.4 minutes/hour for the Elephant grass and Tanzania grass, respectively, in first phase. In the second phase,the grazing time was 461 and 426 minutes and the grazing rate was 42.7 and 39.4 minutes/hour for the Elephant grass and Tanzania grass, respectively. Correlations were observed (P<0.01) between grazing rate and the minimum temperature (-0.68), the maximum temperature (-0.76), the relative humidity (0.44) and the THI (-0.76).

Study of electrochemical oxidation and determination of albendazole using a glassy carbon-rotating disk electrode

In this work, electrochemical oxidation of albendazole (ABZ) was carried out using a glassy carbon-rotating disk electrode. Development of electroanalytical methodology for ABZ quantification in pharmaceutical formulations was also proposed by using linear sweep voltammetric technique. Electrochemical oxidation is observed for ABZ at E 1/2 = 0.99:V vs. Ag/AgCl sat, when an anodic wave is observed. Kinetic parameters obtained for ABZ oxidation exhibited a standard heterogeneous rate constant for the electrodic process equal to (1.51 ± 0.07) ± 10 -5:cm:s -1, with a αn a value equal to 0.76. Limiting current dependence against ABZ concentration exhibited linearity on 5.0 ± 10 -5 to 1.0 ± 10 -2:mol:l -1 range, being obtained a detection limit of 2.4 ± 10 -5:mol:l -1. Proposed methodology was applied to ABZ quantification in pharmaceutical formulations. © 2005 Elsevier SAS. All rights reserved.

Sheep and cattle grazing alternately: Nematode parasitism and pasture decontamination

Three grazing management systems were compared to examine pasture decontamination of gastrointestinal nematode parasites (GIN) of sheep (Ovies aries) and cattle (Bos taurus). They consisted of sheep and cattle grazing paddocks alternately for 32, 96 or 192 days over 2 years. Pastureland (8.43 ha) was subdivided into six areas of eight paddocks each to produce an eight-paddock rotational grazing system. Every paddock was grazed for 4 days and then rested for 28 days. Sixty-six Ile de France ewes and 12 steers were randomly divided into three groups (22 sheep and four cattle per group). Each grazing system included a cattle area and a sheep area. Sheep and cattle interchanged areas every 32 days in system 1 (Group 1), every 96 days in system 2 (Group 2) and every 192 days in system 3 (Group 3). Fecal examination and larvae counting on pasture were performed every 32 days. During summer, winter and spring 2005, tracer lambs free of nematode infection were introduced into each sheep group and later sacrificed for quantification and identification of GIN species. All cattle were sacrificed for the same purpose. The main parasites found in tracer lambs were Haemonchus contortus and Trichostrongylus colubriformis, and in cattle, Haemonchus similis, Cooperia punctata and Oesophagostomum radiatum. Pasture contamination by sheep-infective GIN larvae was considerably reduced after 96 or 192 days of cattle grazing. Cross-infections between sheep and cattle GIN were not significant, which suggested that integrated grazing using such animals could be used for pasture decontamination. However, as effective anthelmintics were not available, decontamination was not sufficient for proper prophylaxis of GIN infections in Ile de France sheep, which are quite susceptible to such parasites. © 2007 Elsevier B.V. All rights reserved.

Active control in rotating machinery using magnetic actuators with linear matrix inequalities (LMI) approach

The recent years have seen the appearance of innovative system for acoustic and vibration attenuation, most of them integrating new actuator technologies. In this sense, the study of algorithms for active vibrations control in rotating machinery became an area of enormous interest, mainly due to countless demands of an optimal performance of mechanical systems in aircraft, aerospace and automotive structures. In this way, this paper presents an approach that is numerically verified for active vibration control in a rotor using Active Magnetic Bearings (AMB). The control design in a discrete state-space formulation is carried out through feedback technique and Linear Matrix Inequalities (LMI) approach. LMI is useful for system with uncertainties. The AMB uses electromagnetic forces to support a rotor without mechanical contact. By monitoring the position of the shaft and changing the dynamics of the system accordingly, the AMB keeps the rotor in a desired position. This unique feature has broadened for the applications of AMB and now they can be considered not only as a main support bearing in a machine but also as dampers for vibration control and force actuators. © 2009 Society for Experimental Mechanics Inc.

Using tree population size structures to assess the impacts of cattle grazing and eucalypts plantations in subtropical South America

To evaluate the effects of distinct management of the matrix in which forest fragments are found upon plant populations thriving in forest remnants in south Brazil, we assessed the conservation status of populations of four woody species (Campomanesia rhombea, Diospyros incontans, Myrciaria cuspidata and Sebastiania commersoniana) through analyses of size structure. Analyzes were carried out at two scales. At a local scale, we consider populations in fragments surrounded by pastures or eucalypts forest plantations, and at a regional scale we also consider larger forest tracts taken as reference areas (Rio Grande do Sul Forest Inventory databank). Population size structures were summarized using the symmetry of height distributions. Small individual size classes prevailed at the local scale in fragments surrounded by eucalypts plantations, whereas in areas exposed to cattle ranching, populations of the same species consistently lack small individuals. At the regional scale, populations in fragments surrounded by pastures presented greater skewness (prevalence of small plants) than populations in reference areas, while populations surrounded by eucalypts plantations presented intermediate skewness. These results reinforce the notion that plantations have a higher conservation value for forest ecosystems than other commercial land uses, like cattle ranching. © 2010 Springer Science+Business Media B.V.

Forage mass production and grazing loss of sorghum hybrid in response to the density of the sowing and the spacing between planting lines

The objective of this experiment was to evaluate dry matter yield and loss of grazing due to animal trampling in response to sowing density and spacing between lines in the planting. Sorghum hybrid 1P400 was submitted to six treatments, composed of three sowing density combinations (12; 16 and 20 kg/ha of seeds) and two spacing between lines (0.40 and 0.80 m). Sorghum hybrid 1P400 was sowed in two seasons, at the end of spring (December 3rd, 2005) and the other at the end of summer (March 20th, 2006). Cultivation strategies influenced plant population in the two experimental seasons. Diameter of the stem in season 1 decreased with density increase, whereas in the second season, interaction between sowing density and spacing was significant. In the first season, 0.40-m spacing promoted greater losses due to grazing stepping, that is, 891 kg/ha of DM, whereas in the second season there was no statistical difference. There was no significant difference in forage dry matter yield in sowing densities among the two studied seasons. Dry mater production of sorghum hybrids 1P400 did not increase with the increase of the sowing density in the two sowing seasons, therefore it is recommended 12 kg/ha of seeds for the sowing. Sorghum IP400 cultivated in 0.80-m spacing resulted in lower forage loss caused by grazing bovine trampling. © 2011 Sociedade Brasileira de Zootecnia.

Development of an instrumentation system embedded on FPGA for real time measurement of mechanical vibrations in rotating machinery

The real-time monitoring of events in an industrial plant is vital, to monitor the actual conditions of operation of the machinery responsible for the manufacturing process. A predictive maintenance program includes condition monitoring of the rotating machinery, to anticipate possible conditions of failure. To increase the operational reliability it is thus necessary an efficient tool to analyze and monitor the equipments, in real-time, and enabling the detection of e.g. incipient faults in bearings. To fulfill these requirements some innovations have become frequent, namely the inclusion of vibration sensors or stator current sensors. These innovations enable the development of new design methodologies that take into account the ease of future modifications, upgrades, and replacement of the monitored machine, as well as expansion of the monitoring system. This paper presents the development, implementation and testing of an instrument for vibration monitoring, as a possible solution to embed in industrial environment. The digital control system is based on an FPGA, and its configuration with an open hardware design tool is described. Special focus is given to the area of fault detection in rolling bearings. © 2012 IEEE.

Parasitism level by helminths and weight gain of calves kept in organic and conventional grazing

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)