Optimizing the width of strip weeding in arabica coffee in relation to crop age

The aim of this study was to determine the weed strip control (WSC) required for adequate coffee growth after transplanting. A non-irrigated, field-planted (spaced 3.80 x 0.70 m) crop was used. The experimental design was a randomized block, with four replicates. The treatments were arranged in a 9 x 18 split-plot design to test the WSC of 0, 15, 30, 45, 60, 90, 120, 150, and 190 cm, which involved continuously hand-weeding at each side of the coffee row, and 18 coffee growth measurements. Multiple regression analyses were carried out relating to growth-variables as a function of both WSC and growth-evaluation times. Brachiaria decumbens was the main weed accomplishing 88.5% of the total weed dry mass. The minimum width of the WSC increases as the crop ages after transplanting. Assuming reductions of 2% and 5% in the maximum coffee growth, the recommended WSC was 75 and 52 cm at 4 months after transplanting (MAT), 104 and 85 cm at 6 MAT, 123 and 105 cm at 9 MAT, 134 and 116 cm at 12 MAT, 142 and 124 cm at 15 MAT, and 148 and 131 cm at 18 MAT, respectively. It was concluded that integrated weed management in young coffee crops must focus on the weed control only in a minimum range along coffee rows, which increases with coffee plant age, keeping natural vegetation in the inter-rows.

Sourgrass densities affecting the initial growth and macronutrient content of coffee plants

The objective of this work was to evaluate the coexistence effects of coffee (Coffea arabica) with densities of sourgrass (Digitaria insularis) on crop macronutrient content and plant growth. The experiment was conducted in plots where one coffee plant was maintained in coexistence with 0 (weed-free check), 1, 2, 4, 8, and 16 sourgrass plants, using a completely randomized design with three replicates. Reduction of coffee growth and macronutrient content, except P that increased, started when the coexistence occurred with sourgrass plants in a density of 1 plant per plot. In general, macronutrient content was reduced by 18-50%, while growth characteristics were reduced by 9-41%, when coffee plants coexisted with 16 plants of sourgrass. Thus, sourgrass competition for nutrients was a strong factor limiting coffee plant growth.

Infestation of weed species in monocrop coffee or intercropped with banana, under agroecological system

We aimed with this study to compare weed infestation in coffee under two different cropping managements: conventional coffee grown alone, or intercropped with banana plantation in a year-round basis (late spring, late summer, late fall and late winter). The experiment was installed in 2009 under field conditions at the Escola Municipal Rural Benedita Figueiró de Oliveira, in the city of Ivinhema in the state of Mato Grosso do Sul, Brazil. Assessments of weed occurrence were made three years after employment, on both cropping systems, and density, frequency, dominance and the importance value for each plant species in each system and season were quantified. Plant diversity within each system was estimated by Simpson and Shannon-Weiner indexes. Similarity between cropping systems were also assessed by the binary asymmetric similarity coefficient of Jaccard. Absolute infestation and spontaneous species differed between the two cropping systems in all seasons. Overall species diversity is higher in the monocrop compared with the intercrop, and it is associated in this study with the higher incidence of troublesome species. Areas were similar in terms of weed composition only in the Fall. Shading provided by the banana trees shows to be an efficient culture management aiming to suppress weeds in agro-ecological planting systems.

Glyphosate drift affects arbuscular mycorrhizal association in coffee

Mycorrhizal association promotes better survival and nutrition of colonized seedling on field, and consequently, increasing of productivity. However, the weed management can interfere on this association, due to incorrect use of glyphosate. This work has assessed the effects of glyphosate drift on the growth and nutrition of arabica coffee plants (Catuaí Vermelho - IAC 99) colonized with arbuscular mycorrhizal fungi (AMF). The experiment was conducted in 2 x 5 factorial scheme, and included inoculated and non-inoculated plants, and five glyphosate subdoses (0.0, 57.6, 115.2, 230.4, and 460.8 g ha-1 of glyphosate), in randomized blocks with five replication. The inoculation was carried during the greenhouse phase of seedlings production with a mixture of Rhizophagus clarus and Gigaspora margarita, and after to transplanting, when the plants had seven pairs of leaves, glyphosate subdoses were applied. The product caused intoxication in up to 60% of non-inoculated and 45% on inoculated plants, when the highest dose of 460.8 g a.e. ha-1 was applied. A negative effect was noted on the growth and phosphorus content of coffee plants, this effect increased depending on glyphosate subdose, but regardless of inoculation. Glyphosate drift reduces the growth and nutrition of plants colonized by species of AMF and native fungi, negatively affecting root colonization of plants treated.

Ochratoxin A in Brazilian green coffee

Ochratoxin A is a nephrotoxic, teratogenic and imunotoxic compound produced by Aspergillus and Penicillium spp. It is a suspected carcinogen to humans and it is carcinogenic to rats. Recently it has drawn attention because it has been found in coffee and it has been the object of regulation by coffee importing countries. Brazil is the largest coffee producing country and its largest consumer. In order to conduct an initial assessment of the situation of the coffee produced in the country and offered to its population, one hundred and thirty two samples of Brazilian green coffee from 5 producing states (Minas Gerais, Paraná, São Paulo, Espírito Santo and Bahia) and destined for the home market, were collected at sales points at the cities of Londrina and Santos, Brazil, and analyzed for ochratoxin A. The toxin was isolated in immunoaffinity columns and quantified by HPLC with florescence detection. The limit of detection was 0.7ng/g and the average RSD for duplicates of the samples was 11%. Twenty seven samples were found contaminated with the toxin and the average concentration for the contaminated samples was 7.1ng/g ochratoxin A. Neither the total number of defects nor the number of specific defects according to the Brazilian coffee classification system (black, partly -- black, sour, stinkers-black, stinkers-green, pod beans) showed any relation to the contamination of the samples with ochratoxin A.

Survey on ochratoxin A in Brazilian green coffee destined for exports

The presence of ochratoxin A (OTA) in foods has led some countries to establish regulatory limits. Although coffee is not a major source of OTA in human consumption, the European Community (EC) may establish limits in the near future, with possible economic impact on producing countries. This study measured the OTA content with HPLC in 37 samples of Brazilian green coffee exclusive destined to the export market and also verified a possible relation between coffee defects and OTA content. The results showed an OTA concentration ranging from < 0.16ng/g (detection limit) to 6.24ng/g (average of 3.20ng/g) for 37 samples. Of the five samples observed for defects, toxin content of sound beans ranged from 0.22 to 0.80ng/g (average 0.46ng/g) and of defective beans from 0.42 to 17.46 (average 4.52ng/g). Morphological differences among sound and defective beans showed no susceptibility for mould invasion under optical microscopy observation. One black bean depicted the presence of mould and spores on observation under Scanning Electron Microscope (SEM). According to this investigation, Brazilian green coffee for export complies with most limits in place.

Influence of the fungi population on the physicochemical and chemical composition of coffee (Coffea arabica L.)

The influence of fungi associated with coffee fruits was verified regarding the chemical and physicochemical composition of Coffea arabica L. raw grains. The fruits were harvested at EPAMIG Experimental farm in Lavras, State of Minas Gerais - making up the different samples here analyzed. After processing and drying, the grains were incubated in wet chamber for fungal exteriorization through the blotter test method and submitted to the following analyses: polyphenoloxidase, total reducing and non-reducing sugars, clorogenic acid, titrable acidity, potassium leaching, electric conductivity and caffeine. The occurrence of the P. variable, P. rugulosum, P. funiculosum, F. equiseti, F. semitectum, A.alutaceus, A. niger and C. cladosporioides fungi in the different samples was detected. From the analysis of the results obtained, it was observed that the presence of the Aspergillus alutaceus fungus reduces the activity of the enzyme polyphenoloxidase and increases the values of potassium leaching, electric conductivity and chlorogenic acid. The incidence of the Cladosporium cladosporioides fungus influenced the average values of potassium leaching and electric conductivity.

Sensory evaluation of "dulce de leche" with coffee and whey using different affective data analysis methods

This study sought to evaluate the acceptance of "dulce de leche" with coffee and whey. The results were analyzed through response surface, ANOVA, test of averages, histograms, and preference map correlating the global impression data with results of physical, physiochemical and sensory analysis. The response surface methodology, by itself, was not enough to find the best formulation. For ANOVA, test of averages, and preference map it was observed that the consumers' favorite "dulce de leche" were those of formulation 1 (10% whey and 1% coffee) and 2 (30% whey and 1% coffee), followed by formulation 9 (20% whey and 1.25% coffee). The acceptance of samples 1 and 2 was influenced by the higher acceptability in relation to the flavor and for presenting higher pH, L*, and b* values. It was observed that samples 1 and 2 presented higher purchase approval score and higher percentages of responses for the 'ideal' category in terms of sweetness and coffee flavor. It was found that consumers preferred the samples with low concentrations of coffee independent of the concentration of whey thus enabling the use of whey and coffee in the manufacture of dulce de leche, obtaining a new product.

Application of roasted rice bran in cereal bars

The objective of this study was to evaluate the viability of using microwave-roasted rice bran as an ingredient in high-fiber cereal bars to obtain a product with good acceptability. The influence of the rice flakes, corn flakes, and roasted rice bran levels on the physical and chemical characteristics of the cereal bars was studied. The overall acceptability of three selected formulations was also evaluated. An increase in the roasted rice bran level in the formulation reduced the force of rupture and water activity, resulted in intermediate density, and caused darkening of the bars. The contents of lipid and total dietary fiber were higher in the formulation with the highest rice bran content, which was therefore classified as functional food. The formulation containing 0.34; 0.32; and 0.34 roasted rice bran, rice flakes, and corn flakes, respectively, seemed to be the best outcome. Cereal bars with roasted rice bran levels between 10 and 20% were accepted by consumers.

Physicochemical and sensory profile of rice bran roasted in microwave

The purpose of this study was to evaluate the physical, chemical, and sensory changes in bran from three rice cultivars according to microwave roasting time. This study analyzed three rice cultivars, BRS Sertaneja (S), BRS Primavera (P), and IRGA 417 (I) determining the color parameters (L*, a*, and b *) at 6, 9, 12, 15, and 18 minutes of roasting time. After applying the difference from control test, the rice brans with different characteristics aroma and flavor were selected: S and P roasted for 9 and 15 minutes and IRGA 417 roasted for 9, 12, and 15 minutes. These samples were characterized by Free-Choice Profile descriptive sensory analysis, and their chemical composition was also determined. The longer the roasting process, the higher the roasted flavor intensity and aroma. The IRG 417 cultivar roasted for 12 minutes showed a sweeter flavor and aroma. After roasting, the brans remained rich in protein and lipid and presented higher fiber content and lower reducing sugar and phytic acid content. Microwave roasting for 12 minutes can be a viable option for improving the sensory functional and nutritional characteristics of the rice bran considering its use in food products.

Development and validation of a method for detection and quantification of ochratoxin A in green coffee using liquid chromatography coupled to mass spectrometry

A method using Liquid Chromatography Tanden Mass Spectrometry (LC-MS/MS) with matrix-matched calibration curve was developed and validated for determining ochratoxin A (OTA) in green coffee. Linearity was found between 3.0 and 23.0 ng.g-1. Mean recoveries ranged between 90.45% and 108.81%; the relative standard deviation under repeatability and intermediate precision conditions ranged from 5.39% to 9.94% and from 2.20% to 14.34%, respectively. The limits of detection and quantification were 1.2 ng.g-1 and 3.0 ng.g-¹, respectively. The method developed was suitable and contributed to the field of mycotoxin analysis, and it will be used for future production of the Certified Reference Material (CRM) for OTA in coffee.

Technological properties of precooked flour containing coffee powder and rice by thermoplastic extrusion

Although Brazil is a country of tradition in both the production and consumption of coffee, the most of the coffee is consumed as a beverage, which reduces greatly the competitiveness on international market, for reducing the chances of supplying the product under other forms of consumption. Owing to that, the aim of this study was developing a precooked mixed flour containing coffee powder and rice for use in coffee flavored products. Mixtures of rice and coffee in the proportions of 900:100, 850:150 and 800:200 g, respectively, were processed in a single screw extruder (Brabender DS-20, Duisburg, German) and the effect of the extrusion process on the variables moisture content (16%, 18% and 20%) and temperature in the third extruding zone (140 °C, 160 °C and 180 °C) was studied. The results for expansion index ranged from 2.91 to 11.11 mm in diameter; the water absorption index from 4.59 to 6.33 g gel/g sample and the water solubility index varied from 4.05% to 8.57%. These results showed that, despite coffee powder influenced the variables studied, the expanded product after milling resulted in a extruded mixture with good absorption and water solubility indices, which favors the use of the precooked mixed flour for human consumption.

Comparison of capillary electrophoresis and high performance liquid chromatography methods for caffeine determination in decaffeinated coffee

Decaffeinated coffee accounts for 10 percent of coffee sales in the world; it is preferred by consumers that do not wish or are sensitive to caffeine effects. This article presents an analytical comparison of capillary electrophoresis (CE) and high performance liquid chromatography (HPLC) methods for residual caffeine quantification in decaffeinated coffee in terms of validation parameters, costs, analysis time, composition and treatment of the residues generated, and caffeine quantification in 20 commercial samples. Both methods showed suitable validation parameters. Caffeine content did not differ statistically in the two different methods of analysis. The main advantage of the high performance liquid chromatography (HPLC) method was the 42-fold lower detection limit. Nevertheless, the capillary electrophoresis (CE) detection limit was 115-fold lower than the allowable limit by the Brazilian law. The capillary electrophoresis (CE) analyses were 30% faster, the reagent costs were 76.5-fold, and the volume of the residues generated was 33-fold lower. Therefore, the capillary electrophoresis (CE) method proved to be a valuable analytical tool for this type of analysis.

The influence of peeling and type of drying on chemical and sensorial analysis of organic coffee

Organic coffee is characterized by being produced without the use of chemical products and by having a similar or superior quality in comparison to that of coffee produced by traditional methods. The production of organic coffee does not include the use of highly soluble nutrients, which makes consumers concerned with environmental issues and healthy eating habits realize its true value. This paper aims to analyze the influence of harvesting, peeling and drying on the quality of organic coffee, in order to present the best way of producing high quality coffee. Samples of organic coffee were harvested by both conventional and selective ways, and some were peeled. They were then dried on concrete patio and on suspended terraces. The beans were analyzed for potassium leaching, electrical conductivity, titratable acidity, and submitted to coffee cupping-test. The results obtained indicated that the selective harvesting of the peeled or unpeeled cherry coffee dried on concrete terrace is feasible for production of fine coffees. This type of processing effectively influenced the final quality of the organic coffee, thus being an alternative to improve the quality and market value of the product, especially for small producers, cooperatives, and associations of coffee producers.