988 resultados para reaction-diffusion
Resumo:
The electron self-exchange rates (k(ex)) of viologen and its derivatives are estimated by using microelectrode voltammetry in poly(ethylene glycol) films. The dependences of supporting electrolyte concentration and sizes of viologen and its derivatives on k(ex) and diffusion coefficients (D) are discussed. Results show that k(ex) increases with the decrease of supporting electrolyte concentration and sizes of reactants. (C) 2000 Elsevier Science S.A. All rights reserved.
Resumo:
The heterogeneous electron transfer rate constants (k(s)) of seven ferrocene derivatives were estimated using cyclic voltammograms under mixed spherical/semi-infinite linear diffusion and steady-state voltammetry at a microdisk electrode in polymer electrolyte. The k(s) and diffusion coefficient (D) are both 100 to 1000-fold smaller in polymer solvent than in monomeric solvents, and the D and k(s) decrease with increasing polymer chain length. The results conform to the difference of viscosity (eta) or relaxation time (tau(L)) for these different solvents. The k(s) and D increase with increasing temperature, and the activation barriers of the electrode reaction are obtained. The influences of the substituting group in the ferrocene ring on k(s) and D are discussed. The k(s) are proportional to the D of the ferrocene derivatives, which indicates that solvent dynamics control the electrode reaction. (C) 1998 Elsevier Science S.A.
Resumo:
The potential step and cyclic voltammetric experiments in the thin layer cell were studied by the digital simulation method in this work. A relationship between the time needed for exhaustive electrolysis of the electroactive species and the thickness of the thin layer cell was obtained. On the basis of this formula, the lower time limit for a kinetic plot of the following chemical reaction can be estimated. For the cyclic voltammetry, a semiempirical formula was derived for the peak-peak potential difference (Delta Ep) in terms of the sweep rate (v), thickness of the cell (d), diffusion coefficient (D) and electron transfer number (n) 59 - n Delta Ep/n Delta Ep = 0.328(RT D/nF vd(2))(1.20).
Resumo:
The rate constant of very fast chemical reaction generally can be measured by electrochemical methods, but can not by the thin layer electrochemical methods because of the influence of diffusion effect. Long optical path length thin layer cell (LOPTLC) with large ratio of electrode area to solution volume can be used to monitor the fist chemical reaction in situ with high sensitivity and accuracy. It enable the adsorption spectra to be measured without the influence of diffusion effect. In the present paper, a fast chemical reaction of Alizarin Red S (ARS) with its oxidative state has been studied. The reaction equilibrium constant (K) under different potentials can be determined by single step potential-absorption spectra in LOPTLC. An equilibrium constant of 7.94 x 10(5) l.mol(-1) for the chemical reaction has been obtained from the plot of lgK vs. (E - E-1(0)'). Rate constant (k) under different potentials can be measured by single step potential-chronoabsorptiometry. A rate constant of 426.6 l.mol(-1).s(-1) for the chemical reaction has been obtained from the plot of lgK vs. (E - E-1(0)') with (E - E-1(0)') = 0.
Resumo:
The electrochemical impedance spectroscopy (EIS) at different potentials has been used to study the oxygen reduction reaction (ORR) in 3.5% NaCl solution on glassy carbon (GC) electrode in this work. Results show that ORR consists of three two-electron reaction steps and both superoxide ion (O-2(-)) and hydrogen peroxide (H2O2), which are produced by ORR, obstruct the diffusion of oxygen to the surface of the electrode and make the EIS results change into a transmissive finite diffusion process with the real part contraction and a reflective finite diffusion process from a semi-infinite diffusion process. The values of electron transfer resistance (R-t) and diffusion resistance (R-d) were calculated from EIS. O-2(-) influenced strongly on the Rt values and induced a maximum at -0.45 V.
Resumo:
Density functional theory has been used to study the adsorption of hydroxyl at low and high coverages and also to investigate the nature of the intermediate in the H2O formation reaction on Pt(111). At low coverages [1/9 of a monolayer (ML) to 1/3 ML] OH binds preferentially at bridge and top sites with a chemisorption energy of similar to2.25 eV. At high coverages (1/2 ML to 1 ML) H bonding between adjacent hydroxyls causes: (i) an enhancement in OH chemisorption energy by about 15%; (ii) a strong preference for OH adsorption at top sites; and (iii) the formation of OH networks. The activation energy for the diffusion of isolated OH groups along close packed rows of Pt atoms is 0.1 eV. This low barrier coupled with H bonding between neighboring OH groups indicates that hydroxyls are susceptible to island formation at low coverages. Pure OH as well as coadsorbed OH and H can be ruled out as the observed low temperature intermediate in the water formation reaction. Instead we suggest that the intermediate consists of a mixed OH+H2O overlayer with a macroscopic surface coverage of 3/4 ML in a 2:1 ratio of OH and H2O. (C) 2001 American Institute of Physics.
Resumo:
The temperature dependence of the bimolecular rate constants for a diffusion controlled reaction involving neutral reactants have been directly determined in five commonly used ionic liquids over the temperature range 5-70 degreesC.
Resumo:
Reactivity of supported gold catalysts is a hot topic in catalysis for many years. This communication reports an investigation on the dissociation of molecular hydrogen at the perimeter sites of Au/TiO2 and the spillover of hydrogen atoms from the gold to the support using density functional theory calculations. It is found that the heterolytic dissociation is favoured in comparison with homolytic dissociation of molecular hydrogen at the perimeter sites. However, the surface oxygen of the rutile TiO2(110) surface at these sites can be readily passivated by the formed OH, suggesting that further dissociation of molecular hydrogen may occur at pure gold sites.
Resumo:
Cette recherche s'intéresse à l'acteur patronal organisé, encore peu étudié en Amérique du Nord. Pourtant, cet acteur est fortement organisé au Québec et il exerce une influence reconnue sur les politiques publiques et les relations industrielles. Cette recherche vise à mieux comprendre la logique d’action des employeurs et les lieux où ils exercent leur influence. Plus important encore, la recherche s’interroge sur les mécanismes de diffusion utilisés par les associations patronales pour transmettre à leurs membres des orientations et des lignes directrices à adopter. Tout comme pour l’acteur syndical qui doit développer sa capacité représentative (Dufour, Hege, Levesque et Murray, 2009), nous croyons qu’il en est de même pour l’acteur patronal. Bref, cette étude cherche à comprendre comment les associations patronales vont s'assurer que leurs membres adoptent des pratiques en lien avec les positions défendues dans les institutions du marché du travail et dans la sphère des politiques publiques. Notre question de recherche est la suivante : Quels sont les mécanismes développés par les associations patronales pour diffuser leurs orientations en matière de politiques publiques et de relations du travail en vue d’influencer les pratiques locales de gestion de leurs membres? Au plan théorique, cette étude mobilise les idées développées par les approches néo-institutionnalistes pour mieux expliquer comment les acteurs vont utiliser les institutions en place pour façonner les règles dans leurs intérêts, ce qui suppose d’abord une capacité de représentation et une cohérence dans les actions entre les niveaux où se situent l’acteur. On cherche à comprendre comment les associations peuvent coordonner les actions patronales en réaction aux changements qui s’opèrent dans l’environnement institutionnel. Les associations patronales sont des entrepreneurs institutionnels (Crouch, 2005) qui sont à la recherche active d’opportunités et de leviers de pouvoir à utiliser pour maximiser leurs intérêts de leurs membres et par la même occasion, réduire les incertitudes en provenance de l’environnement (Campbell, 2004; Streeck et Thelen, 2005; Crouch, 2005). Toujours au niveau théorique, cette étude se base sur les idées avancées par la sociologie des logiques d’action. Cette approche théorique nous permet de rendre compte des niveaux sectoriel et local où s’enracinent les comportements des employeurs. Au niveau sectoriel, il existe une pluralité d’instances qui contribuent à façonner les logiques d’actions des associations patronales. La sociologie des logiques d’actions nous permet d’envisager l’association patronale comme un groupe qui dispose d’une vie qui lui est propre avec une relative autonomie de fonctionnement. La capacité d’influence de l’association serait tributaire des mécanismes de coordination de l’action utilisés pour susciter l’accord au sein du groupe. Les mécanismes de coordination de l’action devraient permettre une connexion régulière et stable entre l’association et ses membres. Cette recherche s’intéresse aux associations patronales qui ont recours à un ensemble de moyens pour diffuser les orientations privilégiées aux entreprises membres. Au plan empirique, cette recherche propose de répondre aux trois objectifs suivants : (1) mieux comprendre les formes d’organisation patronales dans les mines au Québec; (2) mieux saisir la structure et la logique d’action des associations patronales sur les politiques publiques, les relations de travail et le marché du travail et finalement (3) mieux comprendre les mécanismes développés par les associations patronales pour diffuser leurs orientations en vue d’influencer les pratiques locales de gestion de leurs membres. Pour atteindre nos objectifs de recherche, nous avons utilisé une méthodologie qualitative de recherche soit une étude de cas du secteur des mines au Québec. Cette dernière a été conduite en trois étapes : la préparation, la collecte des données et l’interprétation (Merriam, 1998). Les données de cette étude ont été recueillies à l’hiver 2012, par le biais d’entretiens semi-directifs auprès de gestionnaires d’entreprises minières et de dirigeants d’associations minières. Une analyse qualitative du contenu de ces entrevues a été effectuée en lien avec la revue de littérature et nos propositions de recherche. À cette fin, nous avons utilisé la technique de l’appariement logique de Yin (1994), ce qui nous a permis de comparer nos observations à nos propositions de recherche. Au niveau des résultats, nous avons pu constater que les associations patronales du secteur des mines au Québec, endossent davantage le rôle de porte-parole de l’industrie auprès du gouvernement que celui de développeur de services aux membres. Les actions des associations patronales s’exercent à tous les niveaux décisionnels afin d’assurer la meilleure promotion possible des intérêts des employeurs. La représentation politique représente le champ d’activité le plus important qui compose la logique d’action des associations patronales de la filière minérale québécoise. Mentionnons également que la représentation des intérêts des entreprises auprès du public et des médias est également vitale à l’action collective patronale dans un souci d’acceptabilité sociale. Les associations d’employeurs vont tenter principalement d’influencer les pratiques en relations industrielles qui permettent d’assurer une meilleure image de l’industrie et qui sont jugées prioritaires en fonction du contexte institutionnel en place. La recherche nous a permis d’observer un impact favorable et significatif à la capacité de diffusion pour cinq des sept mécanismes de diffusion faisant partie de notre modèle d’analyse. Trois de ces cinq mécanismes favorisent la capacité de diffusion descendante (transposition de la logique d’action sectorielle sur les pratiques locales des membres) et les deux autres favorisent plutôt la capacité de diffusion ascendante (transposition des enjeux locaux jugés prioritaires sur la logique d’action sectorielle). Les mécanismes qui supportent au mieux la cohésion au sein de l’association sont ceux qui impliquent une relation dynamique entre les représentants et les membres et entre les membres eux-mêmes d’où la pertinence d’une diffusion descendante et ascendante des orientations. Il est à noter qu’étant donné que cette recherche consiste en une étude de cas, des limites méthodologiques liées à la généralisation des résultats sont présentes. Il n’est pas aisé d’affirmer que les résultats de cette microanalyse soient généralisables en raison des spécificités du secteur à l’étude. En contrepartie, les analyses ont servi à l’élaboration d’un modèle qui pourra être utilisé dans des études futures.
Resumo:
On line isotope separation techniques (ISOL) for production of ion beams of short-lived radionuclides require fast separation of nuclear reaction products from irradiated target materials followed by a transfer into an ion source. As a first step in this transport chain the release of nuclear reaction products from refractory metals has been studied systematically and will be reviewed. High-energy protons (500 - 1000 MeV) produce a large number of radionuclides in irradiated materials via the nuclear reactions spallation, fission and fragmentation. Foils and powders of Re, W, Ta, Hf, Mo, Nb, Zr, Y, Ti and C were irradiated with protons (600 - 1000 MeV) at the Dubna synchrocyclotron, the CERN synchrocyclotron and at the CERN PS-booster to produce different nuclear reaction products. The main topic of the paper is the determination of diffusion coefficients of the nuclear reaction products in the target matrix, data evaluation and a systematic interpretation of the data. The influence of the ionic radius of the diffusing species and the lattice type of the host material used as matrix or target on the diffusion will be evaluated from these systematics. Special attention was directed to the release of group I, II and III-elements. Arrhenius plots lead to activation energies of the diffusion process.
Resumo:
Single crystals of trans-cinnamic acid and of a range of derivatives of this compound containing halogen substituents on the aromatic ring have been reacted with 165 Torr pressure of bromine vapour in a sealed desiccator at 20 degrees C for 1 week. Infrared and Raman microspectroscopic examination of the crystals shows that bromination of the aliphatic double bond, but not of the aromatic ring, has occurred. It is demonstrated also that the reaction is truly gas-solid in nature. A time-dependent study of these reactions shows that they do not follow a smooth diffusion-controlled pathway. Rather the reactions appear to be inhomogeneous and to occur at defects within the crystal. The reaction products are seen to flake from the surface of the crystal. It is shown, therefore, that these are not single crystal to single crystal transitions, as have been observed previously for the photodimerisation of trans-cinnamic acid and several of its derivatives. It is shown that there are no by-products of the reaction and that finely ground samples react to form the same products as single crystals.
Resumo:
We present a novel kinetic multi-layer model that explicitly resolves mass transport and chemical reaction at the surface and in the bulk of aerosol particles (KM-SUB). The model is based on the PRA framework of gas-particle interactions (Poschl-Rudich-Ammann, 2007), and it includes reversible adsorption, surface reactions and surface-bulk exchange as well as bulk diffusion and reaction. Unlike earlier models, KM-SUB does not require simplifying assumptions about steady-state conditions and radial mixing. The temporal evolution and concentration profiles of volatile and non-volatile species at the gas-particle interface and in the particle bulk can be modeled along with surface concentrations and gas uptake coefficients. In this study we explore and exemplify the effects of bulk diffusion on the rate of reactive gas uptake for a simple reference system, the ozonolysis of oleic acid particles, in comparison to experimental data and earlier model studies. We demonstrate how KM-SUB can be used to interpret and analyze experimental data from laboratory studies, and how the results can be extrapolated to atmospheric conditions. In particular, we show how interfacial and bulk transport, i.e., surface accommodation, bulk accommodation and bulk diffusion, influence the kinetics of the chemical reaction. Sensitivity studies suggest that in fine air particulate matter oleic acid and compounds with similar reactivity against ozone (carbon-carbon double bonds) can reach chemical lifetimes of many hours only if they are embedded in a (semi-)solid matrix with very low diffusion coefficients (< 10(-10) cm(2) s(-1)). Depending on the complexity of the investigated system, unlimited numbers of volatile and non-volatile species and chemical reactions can be flexibly added and treated with KM-SUB. We propose and intend to pursue the application of KM-SUB as a basis for the development of a detailed master mechanism of aerosol chemistry as well as for the derivation of simplified but realistic parameterizations for large-scale atmospheric and climate models.
Resumo:
We present a novel kinetic multi-layer model that explicitly resolves mass transport and chemical reaction at the surface and in the bulk of aerosol particles (KM-SUB). The model is based on the PRA framework of gas–particle interactions (P¨oschl et al., 5 2007), and it includes reversible adsorption, surface reactions and surface-bulk exchange as well as bulk diffusion and reaction. Unlike earlier models, KM-SUB does not require simplifying assumptions about steady-state conditions and radial mixing. The temporal evolution and concentration profiles of volatile and non-volatile species at the gas-particle interface and in the particle bulk can be modeled along with surface 10 concentrations and gas uptake coefficients. In this study we explore and exemplify the effects of bulk diffusion on the rate of reactive gas uptake for a simple reference system, the ozonolysis of oleic acid particles, in comparison to experimental data and earlier model studies. We demonstrate how KM-SUB can be used to interpret and analyze experimental data from laboratory stud15 ies, and how the results can be extrapolated to atmospheric conditions. In particular, we show how interfacial transport and bulk transport, i.e., surface accommodation, bulk accommodation and bulk diffusion, influence the kinetics of the chemical reaction. Sensitivity studies suggest that in fine air particulate matter oleic acid and compounds with similar reactivity against ozone (C=C double bonds) can reach chemical lifetimes of 20 multiple hours only if they are embedded in a (semi-)solid matrix with very low diffusion coefficients (10−10 cm2 s−1). Depending on the complexity of the investigated system, unlimited numbers of volatile and non-volatile species and chemical reactions can be flexibly added and treated with KM-SUB. We propose and intend to pursue the application of KM-SUB 25 as a basis for the development of a detailed master mechanism of aerosol chemistry as well as for the derivation of simplified but realistic parameterizations for large-scale atmospheric and climate models.
Resumo:
A dialkylborenium ion stabilized by an N-heterocyclic carbene has been prepared for the first time by reaction of IMes-9-BBN-H with triflic acid. The ion-separated nature of the borenium ion was confirmed by 1H and 19F diffusion ordered NMR spectroscopy.
Resumo:
Back-scattered imaging, X-ray element mapping and electron microprobe analyzer (EMPA) chemical dating reveal complex compositional and age zoning in monazite crystals from different layers and textural positions in a garnet-bearing migmatite in SE Brazil. Y-rich (variable Y(2)O(3), averaging 2.5 wt.%) relict cores are preserved in mesosome and melanosome monazite, and correspond to 793 +/- 6 Ma inherited crystals possibly generated in a previous metamorphic event. These cores are overgrown and widely replaced by two generations of monazite, which are present in all migmatite layers. The first, also Y-rich (average 2.5 wt.% Y(2)O(3)), was produced at similar to 635 Ma during prograde metamorphism under subsolidus conditions, while the second has an Y-poor (<1.5 wt.% Y(2)O(3)), low Th/U signature, and precipitated from low Y and HREE anatectic melts produced by reactions in which garnet was inert. Quartz-rich trondhjemitic leucosome represents lower temperature melt (bearing some subsolidus quartz and garnet with included monazite) formed at temperatures below muscovite breakdown; its Y-poor monazite indicates an age of 617 +/- 6 Ma. Granitic leucosomes formed close to peak metamorphic conditions (T>750 degrees C) above muscovite breakdown have their slightly younger character confirmed by a 609 +/- 7 Ma low-Y monazite age. A similar 606 +/- 5 Ma age was obtained for low-Y monazite rims and domains in mesosome and melanosome, and reflects the time of monazite saturation in interstitial granitic melt that was trapped in these layers. Our results confirm that inherited monazite crystals can be preserved during partial melting at temperatures above muscovite breakdown. Moreover, careful textural control aided by X-ray chemical mapping may allow monazite generated at different stages in a similar to 25 Myr prograde metamorphic path to be identified and dated using an electron microprobe. (C) 2008 Elsevier B.V. All rights reserved.