Novel expert system for defining power quality compensators

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Xenia Effects on Quality of Maize Female Inbred in Production of Hybrid Seeds

In Maize (Zea maize L.), cost of hybrid seed production is directly related to the yield and quality of seed obtained per hectare of female parent. It is also important to consider the effects that a male parent can exert on the development of hybrid seed in the female parent. This effect is known as xenia. The objectives of this study were to evaluate xenia effects on 1) yield as 80K units, 2) germination of the hybrid seed and 3) susceptibility of the hybrid seed to mechanical damage. One female inbred and four male inbred lines were selected from a parent list of hybrids. The experiment was designed to allow individual cross pollination between each male inbred and the female inbred line. For use as a control, the female inbred was allowed to self pollinate. Experiments were conducted in Illinois and Iowa during 2008 and 2009 and in Nebraska during 2009. A significant inbred effect was detected on yield as 80k (α=0.001). The selfed female and pollination with male inbred B resulted in lower yields of hybrid seed. For germination, a significant inbred effect was detected (α=0.001), but was due to lower germination percentage of seed produced on the selfed female. All hybrid combinations resulted in higher germination percentages with no significant differences among hybrids. The inbred x mechanical damage interaction was significant (P=0.04) for effects on cold saturated soil germination tests. Use of inbred B resulted in a two-percentage-point reduction in cold germination when treated with the impact simulator. In a maize seed company, the production research group provides yield estimates for production of new hybrid combinations. Results from this study indicate that using only the female inbred yield may provide inaccurate estimates. Therefore to improve yield estimation, experiments should be designed to include male inbreds. Male inbreds can also impart a negative effect to the hybrid seed on tolerance to mechanical damage, thus lowering quality and increasing seed discard. When testing for hybrid seed germination, there is no need to consider distinct hybrid combinations. Female inbreds can be grown in open-pollinated fields to avoid loss of vigor observed with selfing. Advisor: George Graef

Quality of life in elderly adults before and after hearing aid fitting

Presbycusis is a common disorder in the elderly, which causes hearing loss and may contribute to the development of some psychiatric disorders, leading to isolation clue to communication difficulties in the social environment. Objective: To identify through the WHOQOL (World Health Organization Quality of Life Questionnaire), the quality of life of hearing impaired individuals before and after hearing aid fittings. Method: We had 30 individuals with hearing loss, all over 60 years of age - patients from a Speech Therapy Clinic. The patients answered the WHOQOL questions without the use of hearing aids; and after the effective use of a sound amplification device for a period of three months they answered it again. The WHOQOL - Bref consists of 26 questions, two general quality-of-life questions and 24 associated with four aspects: physical, psychological, environmental and social relations. Results: There was a significant improvement in quality of life in general, as far as leisure activities were concerned, there were no major changes regarding the frequency of negative feelings; even after the hearing aid fitting, the patients continue to have such feelings. Conclusion: The use of hearing aids favored the overall quality of life of the individuals evaluated.

Cost and energy density of diet in Brazil, 2008-2009

This study aimed to evaluate the relationship between the cost and energy density of diet consumed in Brazilian households. Data from the Brazilian Household Budget Survey (POF 200812009) were used to identify the main foods and their prices. Similar items were grouped, resulting in a basket of 67 products. Linear programming was applied for the composition of isoenergetic baskets, minimizing the deviation from the average household diet. Restrictions were imposed on the inclusion of items and the energy contribution of the various food groups. A reduction in average cost of diet was applied at intervals of R$0.15 to the lowest possible cost. We identified an inverse association between energy density and cost of diet (p < 0.05), and at the lowest possible cost we obtained the maximum value of energy density Restrictions on the diet's cost resulted in the selection of diets with higher energy density, indicating that cost of diet may lead to the adoption of inadequate diets in Brazil.

Cost-effectiveness and budget impact of saxagliptine as additional therapy to metformin for the treatment of diabetes mellitus type 2 in the Brazilian private health system

Cost-effectiveness and budget impact of saxagliptine as additional therapy to metformin for the treatment of diabetes mellitus type 2 in the Brazilian private health system Objectives: To compare costs and clinical benefits of three additional therapies to metformin (MF) for patients with diabetes mellitus type 2 (DM2). Methods: A discrete event simulation model seas built to estimate the cost-utility ratio (cost per quality-adjusted life years [QALY)) of saxagliptine as an additional therapy to MF when compared to rosiglitazone or pioglitazone. A budget impact model (BIM) was built to simulate the economic impact of saxagliptine use in the context of the Brazilian private health system. Results: The acquiring medication costs for the hypothetical patient group analyzed in a time frame of three years, were R$ 10,850,185, R$ 14,836,265 and R$ 14,679,099 for saxagliptine, pioglitazone and rosiglitazone, respectively. Saxagliptine showed lower costs and greater effectiveness in both comparisons, with projected savings for the first three years of R$ 3,874 and R$ 3,996, respectively. The BIM estimated cumulative savings of R$ 417,958 with the repayment of saxagliptine in three years from the perspective of a health plan with 1,000,000 covered individuals. Conclusion: From the perspective of private paying source, the projection is that adding saxagliptine with MF save costs when compared with the addition of rosiglitazone or pioglitazone in patients with DM2 that have not reached the HbA1c goal with metformin monotherapy. The BIM of including saxagliptine in the reimbursement lists of health plans indicated significant savings on the three-year horizon.

Selection of Top 10 Quality Indicators for Nutrition Therapy

Background: The identification of useful quality indicators for nutrition therapy (QINTs) is of great interest and a challenge. This study attempted to identify the 10 QINTs that best suit the practice of quality control in nutrition therapy (NT) by evaluating the opinion of experts in NT with the use of psychometric techniques and statistical tools. Methods: Thirty-six QINTs available for clinical application in Brazil were assessed in 2 distinct phases. In phase 1, 26 nutrition experts ranked QINTs by scoring 4 attributes (utility, simplicity, objectivity, low cost) to assess each QINT on a 5-point Likert scale. The top 10 QINTs were identified from the 10 best scores obtained, and the reliability of expert opinion for each indicator was assessed by Cronbach's alpha. In phase 2, experts provided feedback regarding the selected top 10 QINTs by answering 2 closed questions. Results: The top 10 QINTs, in descending order, are the frequency of nutrition screening of hospitalized patients, diarrhea, involuntary withdrawal of enteral feeding tubes, feeding tube obstruction, fasting longer than 24 hours, glycemic dysfunction, estimated energy expenditure and protein needs, central venous catheter infection, compliance of NT indication, and frequency of application of subjective global assessment. Opinions were consistent among the interviewed experts. During feedback, 96% of experts were satisfied with the top 10 QINTs, and 100% had considered them in accordance with their previous opinion. Conclusion: The top 10 QINTs were identified according to their usefulness in clinical practice by obtaining adequate agreement and representativeness of opinion of nutrition experts. (Nutr Clin Pract. 2012;27:261-267)

Cost-Effectiveness Analysis for Surgical, Angioplasty, or Medical Therapeutics for Coronary Artery Disease 5-Year Follow-Up of Medicine, Angioplasty, or Surgery Study (MASS) II Trial

Background-The Second Medicine, Angioplasty, or Surgery Study (MASS II) included patients with multivessel coronary artery disease and normal systolic ventricular function. Patients underwent coronary artery bypass graft surgery (CABG, n = 203), percutaneous coronary intervention (PCI, n = 205), or medical treatment alone (MT, n = 203). This investigation compares the economic outcome at 5-year follow-up of the 3 therapeutic strategies. Methods and Results-We analyzed cumulative costs during a 5-year follow-up period. To analyze the cost-effectiveness, adjustment was made on the cumulative costs for average event-free time and angina-free proportion. Respectively, for event-free survival and event plus angina-free survival, MT presented 3.79 quality-adjusted life-years and 2.07 quality-adjusted life-years; PCI presented 3.59 and 2.77 quality-adjusted life-years; and CABG demonstrated 4.4 and 2.81 quality-adjusted life-years. The event-free costs were $9071.00 for MT; $19 967.00 for PCI; and $18 263.00 for CABG. The paired comparison of the event-free costs showed that there was a significant difference favoring MT versus PCI (P<0.01) and versus CABG (P<0.01) and CABG versus PCI (P<0.01). The event-free plus angina-free costs were $16 553.00, $25 831.00, and $24 614.00, respectively. The paired comparison of the event-free plus angina-free costs showed that there was a significant difference favoring MT versus PCI (P=0.04), and versus CABG (P<0.001); there was no difference between CABG and PCI (P>0.05). Conclusions-In the long-term economic analysis, for the prevention of a composite primary end point, MT was more cost effective than CABG, and CABG was more cost-effective than PCI.

An analysis of Taguchi's on-line quality monitoring procedure for variables based on the results of a sequence of inspections

In this paper, a procedure for the on-line process control of variables is proposed. This procedure consists of inspecting the m-th item from every m produced items and deciding, at each inspection, whether the process is out-of-control. Two sets of limits, warning (µ0 ± W) and control (µ0 ± C), are used. If the value of the monitored statistic falls beyond the control limits or if a sequence of h observations falls between the warning limits and the control limits, the production is stopped for adjustment; otherwise, production goes on. The properties of an ergodic Markov chain are used to obtain an expression for the average cost per item. The parameters (the sampling interval m, the widths of the warning, the control limits W and C(W < C), and the sequence length (h) are optimized by minimizing the cost function. A numerical example illustrates the proposed procedure.

Mass-rearing of Mediterranean fruit fly using low-cost yeast products produced in Brazil

Ceratitis capitata is one of the most important pests of fruits for exportation, and Sterile Insect Technique (SIT) has been the most efficient and environmental friendly technique used to control fruit fly populations around the world. A key goal in achieving a successful SIT program is a mass rearing system producing high quality insects at low cost. Providing adults with an artificial diet containing hydrolysed protein has been the major obstacle for bio-production facilities in Brazil, because it is expensive and has to be imported. Two other commercial products, autolysed yeast (AY) and yeast extract (YE), of domestic origin and low cost, were tested as substitutes of the imported hydrolyzed protein. To compare their efficiency we observed the female fecundity, adult survival and egg viability of flies raised on diets containing one of each of the different protein products. Flies reared on the domestic yeast products had equivalent or superior performance to the flies reared on imported protein. Both AY and YE can be a possible substitute for imported hydrolyzed protein for C. capitata mass-rearing, as they are cheaper and are readily available in the national market.

Effect of rearing system intensiveness on biological features, culture performance and larval quality of meagre (Argyrosomus regius Asso, 1801) larvae

[EN]Meagre, Argyrosomus regius A., is a new species for aquaculture in south Atlantic and Mediterranean regions, that can reach a mean fresh weight of 8.02±2.51g. at 95dah. However, hatchery techniques must be improved to optimize culture performance and larval quality. Eggs of meagre were cultured under intensive (75 indv.l-1 in 2m3 tanks) and semi-intensive system (7.5 indv.l-1 in 40m3 tanks) to evaluate the effect of the intensification on biological features, stress resistance and skeletal deformities. At 30dah, despite in semi-intensive system reared larvae a higher total length (19.08± 2.3mm vs 16.00±1.54mm), dry body weight (13.09± 2.43mg vs 6.46±0.52mg), and survival after the activity test (75.0± 13.8% vs 53.3±11.5%) was found, the use of intensive systems were also very suitable and cost-effective for larval rearing of this species

Development and characterization of a distributed measurement system for the evaluation of voltage quality in electric power networks

The research activity carried out during the PhD course in Electrical Engineering belongs to the branch of electric and electronic measurements. The main subject of the present thesis is a distributed measurement system to be installed in Medium Voltage power networks, as well as the method developed to analyze data acquired by the measurement system itself and to monitor power quality. In chapter 2 the increasing interest towards power quality in electrical systems is illustrated, by reporting the international research activity inherent to the problem and the relevant standards and guidelines emitted. The aspect of the quality of voltage provided by utilities and influenced by customers in the various points of a network came out only in recent years, in particular as a consequence of the energy market liberalization. Usually, the concept of quality of the delivered energy has been associated mostly to its continuity. Hence the reliability was the main characteristic to be ensured for power systems. Nowadays, the number and duration of interruptions are the “quality indicators” commonly perceived by most customers; for this reason, a short section is dedicated also to network reliability and its regulation. In this contest it should be noted that although the measurement system developed during the research activity belongs to the field of power quality evaluation systems, the information registered in real time by its remote stations can be used to improve the system reliability too. Given the vast scenario of power quality degrading phenomena that usually can occur in distribution networks, the study has been focused on electromagnetic transients affecting line voltages. The outcome of such a study has been the design and realization of a distributed measurement system which continuously monitor the phase signals in different points of a network, detect the occurrence of transients superposed to the fundamental steady state component and register the time of occurrence of such events. The data set is finally used to locate the source of the transient disturbance propagating along the network lines. Most of the oscillatory transients affecting line voltages are due to faults occurring in any point of the distribution system and have to be seen before protection equipment intervention. An important conclusion is that the method can improve the monitored network reliability, since the knowledge of the location of a fault allows the energy manager to reduce as much as possible both the area of the network to be disconnected for protection purposes and the time spent by technical staff to recover the abnormal condition and/or the damage. The part of the thesis presenting the results of such a study and activity is structured as follows: chapter 3 deals with the propagation of electromagnetic transients in power systems by defining characteristics and causes of the phenomena and briefly reporting the theory and approaches used to study transients propagation. Then the state of the art concerning methods to detect and locate faults in distribution networks is presented. Finally the attention is paid on the particular technique adopted for the same purpose during the thesis, and the methods developed on the basis of such approach. Chapter 4 reports the configuration of the distribution networks on which the fault location method has been applied by means of simulations as well as the results obtained case by case. In this way the performance featured by the location procedure firstly in ideal then in realistic operating conditions are tested. In chapter 5 the measurement system designed to implement the transients detection and fault location method is presented. The hardware belonging to the measurement chain of every acquisition channel in remote stations is described. Then, the global measurement system is characterized by considering the non ideal aspects of each device that can concur to the final combined uncertainty on the estimated position of the fault in the network under test. Finally, such parameter is computed according to the Guide to the Expression of Uncertainty in Measurements, by means of a numeric procedure. In the last chapter a device is described that has been designed and realized during the PhD activity aiming at substituting the commercial capacitive voltage divider belonging to the conditioning block of the measurement chain. Such a study has been carried out aiming at providing an alternative to the used transducer that could feature equivalent performance and lower cost. In this way, the economical impact of the investment associated to the whole measurement system would be significantly reduced, making the method application much more feasible.

Calibration and validation of an air quality finite element model around an electric power plant in Gran Canaria island

[EN]This work presents the calibration and validation of an air quality finite element model applied to the surroundings of Jinamar electric power plant in Gran Canaria island (Spain). The model involves the generation of an adaptive tetrahedral mesh, the computation of an ambient wind field, the inclusion of the plume rise effect in the wind field, and the simulation of transport and reaction of pollutants. The main advantage of the model is the treatment of complex terrains that introduces an alternative to the standard implementation of current models. In addition, it improves the computational cost through the use of unstructured meshes...

Quality of experience in skype video calls

Skype is one of the well-known applications that has guided the evolution of real-time video streaming and has become one of the most used software in everyday life. It provides VoIP audio/video calls as well as messaging chat and file transfer. Many versions are available covering all the principal operating systems like Windows, Macintosh and Linux but also mobile systems. Voice quality decreed Skype success since its birth in 2003 and peer-to-peer architecture has allowed worldwide diffusion. After video call introduction in 2006 Skype became a complete solution to communicate between two or more people. As a primarily video conferencing application, Skype assumes certain characteristics of the delivered video to optimize its perceived quality. However in the last years, and with the recent release of SkypeKit1, many new Skype video-enabled devices came out especially in the mobile world. This forced a change to the traditional recording, streaming and receiving settings allowing for a wide range of network and content dynamics. Video calls are not anymore based on static ‘chatting’ but mobile devices have opened new possibilities and can be used in several scenarios. For instance, lecture streaming or one-to-one mobile video conferences exhibit more dynamics as both caller and callee might be on move. Most of these cases are different from “head&shoulder” only content. Therefore, Skype needs to optimize its video streaming engine to cover more video types. Heterogeneous connections require different behaviors and solutions and Skype must face with this variety to maintain a certain quality independently from connection used. Part of the present work will be focused on analyzing Skype behavior depending on video content. Since Skype protocol is proprietary most of the studies so far have tried to characterize its traffic and to reverse engineer its protocol. However, questions related to the behavior of Skype, especially on quality as perceived by users, remain unanswered. We will study Skype video codecs capabilities and video quality assessment. Another motivation of our work is the design of a mechanism that estimates the perceived cost of network conditions on Skype video delivery. To this extent we will try to assess in an objective way the impact of network impairments on the perceived quality of a Skype video call. Traditional video streaming schemes lack the necessary flexibility and adaptivity that Skype tries to achieve at the edge of a network. Our contribution will lye on a testbed and consequent objective video quality analysis that we will carry out on input videos. We will stream raw video files with Skype via an impaired channel and then we will record it at the receiver side to analyze with objective quality of experience metrics.

Electric techniques for the assessment of quality parameters of foodstuffs

In food industry, quality assurance requires low cost methods for the rapid assessment of the parameters that affect product stability. Foodstuffs are complex in their structure, mainly composed by gaseous, liquid and solid phases which often coexist in the same product. Special attention is given to water, concerned as natural component of the major food product or as added ingredient of a production process. Particularly water is structurally present in the matrix and not completely available. In this way, water can be present in foodstuff in many different states: as water of crystallization, bound to protein or starch molecules, entrapped in biopolymer networks or adsorbed on solid surfaces of porous food particles. The traditional technique for the assessment of food quality give reliable information but are destructive, time consuming and unsuitable for on line application. The techniques proposed answer to the limited disposition of time and could be able to characterize the main compositional parameters. Dielectric interaction response is mainly related to water and could be useful not only to provide information on the total content but also on the degree of mobility of this ubiquitous molecule in different complex food matrix. In this way the proposal of this thesis is to answer at this need. Dielectric and electric tool can be used for the scope and led us to describe the complex food matrix and predict food characteristic. The thesis is structured in three main part, in the first one some theoretical tools are recalled to well assess the food parameter involved in the quality definition and the techniques able to reply at the problem emerged. The second part explains the research conducted and the experimental plans are illustrated in detail. Finally the last section is left for rapid method easily implementable in an industrial process.

Hematopoietic stem cell transplantation in Switzerland: a comprehensive quality control report on centre effect

QUESTIONS UNDER STUDY / PRINCIPLES: Interest groups advocate centre-specific outcome data as a useful tool for patients in choosing a hospital for their treatment and for decision-making by politicians and the insurance industry. Haematopoietic stem cell transplantation (HSCT) requires significant infrastructure and represents a cost-intensive procedure. It therefore qualifies as a prime target for such a policy. METHODS: We made use of the comprehensive database of the Swiss Blood Stem Cells Transplant Group (SBST) to evaluate potential use of mortality rates. Nine institutions reported a total of 4717 HSCT - 1427 allogeneic (30.3%), 3290 autologous (69.7%) - in 3808 patients between the years 1997 and 2008. Data were analysed for survival- and transplantation-related mortality (TRM) at day 100 and at 5 years. RESULTS: The data showed marked and significant differences between centres in unadjusted analyses. These differences were absent or marginal when the results were adjusted for disease, year of transplant and the EBMT risk score (a score incorporating patient age, disease stage, time interval between diagnosis and transplantation, and, for allogeneic transplants, donor type and donor-recipient gender combination) in a multivariable analysis. CONCLUSIONS: These data indicate comparable quality among centres in Switzerland. They show that comparison of crude centre-specific outcome data without adjustment for the patient mix may be misleading. Mandatory data collection and systematic review of all cases within a comprehensive quality management system might, in contrast, serve as a model to ascertain the quality of other cost-intensive therapies in Switzerland.