Fluxo físico do cimento: um estudo de caso

Descreve em detalhes o sistema de Distribuição física de uma cimenteira, referente ao Fluxo da Fábrica aos Terminais de Vendas e clientes. Aborda os principais problemas encontrados no sistema atual utilizado, propõe novo sistema demonstrando os resultados esperados. A preocupação é demonstrar, as relações entre o Modelo Teórico de Distribuição, extraído da literatura, e o prático atual e proposto. Analisa a importância da conceituação clara das atividades e funções de cada elemento do sistema e os resultados que isto traduz, em termos de aumento do Esforço Mercadológico, através da melhoria da eficácia do Sistema, tecendo considerações sobre a importância da Distribuição Física na comercialização do cimento.

Caracterização físico-química e avaliação dos perfis de liberação in vitro de micropartículas revestidas com nanocápsulas poliméricas

Micropartículas nanorrevestidas foram preparadas através da secagem por aspersão empregando-se suspensões de nanocápsulas poliméricas como material de revestimento. Uma matriz 2³ foi empregada, e os fatores analisados foram o método de preparação de nanocápsulas (nanoprecipitação e emulsificação-difusão), o polímero [poli(ε-caprolactona) e Eudragit® RS100] e a forma de inclusão da indometacina nas micropartículas (nanocápsulas ou núcleo). Duas formulações adicionais foram preparadas associando a indometacina ao dióxido de silício em etapa única, empregando nanocápsulas obtidas através do método de nanoprecipitação com a poli(ε-caprolactona) e com o Eudragit® RS100. As suspensões de nanocápsulas foram caracterizadas através da medida do pH, do tamanho médio de partícula, do potencial zeta e da eficiência de encapsulação. As micropartículas nanorrevestidas foram caracterizadas quanto ao tamanho de partícula, a taxa de associação, ao rendimento, a área superficial e ao volume de poros. A análise morfológica foi realizada através da microscopia eletrônica de varredura e da microscopia óptica. Também foram determinados o tamanho médio de partícula e o potencial zeta dos pós ressuspendidos. Os perfis de dissolução foram avaliados em tampão fosfato pH 6,8 através da eficiência de dissolução, dos fatores de similaridade e de diferença, da modelagem matemática e do modelo da Lei da Potência. O conjunto dos resultados permitiu selecionar as formulações preparadas com Eudragit® RS100 como sendo as mais promissoras, porque apresentaram maior controle da liberação do fármaco. Em relação à técnica de preparação das nanocápsulas foi selecionada a nanoprecipitação, pois possibilitou a redução de tensoativos, o que torna o processo de secagem mais eficiente. Além disso, a estratégia de associação do fármaco em uma etapa demonstrou perfis de liberação mais controlados para as micropartículas nanorrevestidas. A modelagem matemática empregando a Lei da Potência permitiu a proposição de um modelo de dissolução, a desaglomeração do sistema nanorrevestido microparticulado.

Micropartículas de p(hbhv) e de blendas de p(hbhv):pcl contendo dexametasona ou acetato de dexametasona como modelos de fármacos : caracterização físico-química e perfis de liberação in vitro

Tendo em vista o controle da porosidade da matriz polimérica de micropartículas constituídas por blendas de poli(hidroxibutirato-co-hidroxivalerato) [P(HBHV)] e de poli- ε-caprolactona (PCL), o presente trabalho objetivou verificar a possibilidade de controle da liberação de fármacos associados a esses sistemas. Foram preparadas micropartículas constituídas de blendas de P(HBHV):PCL nas proporções de 100:0, 90:10 e 80:20 (m/m) pelo método de emulsificação/evaporação de solvente, variandose o volume de fase orgânica. Os modelos de fármacos utilizados foram a dexametasona e o acetato de dexametasona. As micropartículas obtidas apresentaram rendimento e eficiência de encapsulação satisfatória, entretanto, através de análises por microscopia óptica e microscopia eletrônica de varredura foi evidenciada a ocorrência de cristais de fármaco não encapsulado. Os diâmetros de partícula permaneceram em torno de 100 a 200 μm e variaram em função do volume de fase orgânica. A área superficial foi afetada pelo percentual de PCL na blenda e pela presença de cristais do fármaco nas formulações. A análise térmica das amostras demonstrou que o processo de obtenção alterou a estrutura cristalina do P(HBHV) e que a encapsulação dos fármacos levou à variação da sua temperatura de transição vítrea e cristalinidade. Os perfis de dissolução da dexametasona a partir das micropartículas apresentaram ajustes adequados ao modelo monoexponencial e foram semelhantes aos perfis apresentados pelo fármaco não encapsulado. Nas formulações contendo acetato de dexametasona houve liberação sustentada do fármaco por até 250 horas quando associado aos sistemas e a modelagem matemática indicou ajuste dos perfis ao modelo biexponencial. Evidenciou-se um aumento nos valores das constantes de liberação dos fármacos conforme o acréscimo do conteúdo de PCL na blenda.

Micropartículas contendo pantoprazol sódico : preparação, caracterização físico-química e avaliação anti-ulcerativa in vivo e da absorção intestinal ex vivo

O pantoprazol (PAN) é um inibidor da bomba de prótons clinicamente empregado para o tratamento de úlcera gástrica e refluxo gastro-esofágico. Estudos relacionados à estabilidade físico-química mostraram que a degradação do PAN está diretamente relacionada com a acidez do meio, determinando a necessidade de administrá-lo em uma forma gastrorresistente. Desse modo, este trabalho propôs-se a desenvolver micropartículas à base de polímero gastrorresistente (Eudragit S100®), polímero de baixa permeabilidade (Eudragit RS30D®) ou de blenda polimérica (Eudragit S100®/ Eudragit RS30D®), contendo PAN pela técnica de spraydrying . O estudo de dissolução in vitro utilizando célula de fluxo demonstrou que o PAN foi liberado das micropartículas em 120 minutos, seguindo cinética de primeira ordem, de acordo com o modelo monoexponencial. A avaliação da gastrorresistência in vitro em célula de fluxo e em dissolutor evidenciou que as formulações de micropartículas à base de Eudragit S100® e da blenda (Eudragit S100®/ Eudragit RS30D®), garantiram adequada proteção ao fármaco em ambiente ácido. Estudos in vivo confirmaram esses resultados, pois possibilitaram a constatação da proteção do fármaco pelas micropartículas durante a passagem pelo estômago, o que possibilitou absorção entérica do PAN em quantidade adequada para exercer atividade farmacológica. Por fim, a investigação ex vivo da permeação do PAN carreado por micropartículas no epitélio intestinal mostrou que estes sistemas foram capazes de garantir a absorção da totalidade do fármaco carreado, constatando-se ainda que este processo ocorreu segundo o modelo monoexponencial.

Modificações no ambiente sócio-físico entre 2005 e 2011: a percepção dos moradores de Itapuama, Cabo de Santo Agostinho-Pernambuco

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Caracterização físico-química e efeitos de frações polissacarídicas da alga amansia multifida na coagulação, inflamação, radicais livres e viabilidade celular

Galactans are polysaccharides sulfated present in the cell wall of red algae. Carrageenans are galactans well known in the food industry as gelling polysaccharides and for induce inflammatory process in rodents as animal model. The extraction of polysaccharides from A. multifida has been carried out by proteolysis and precipitation in different volumes of acetone, which produced three fractions (F1, F2, and FT). Chemical and physical analyses revealed that these fractions are sulfated galactan predominantly. Results of the antioxidant activity assays showed that all of these fractions have antioxidant activity and that was associated with sulfate content of the analysis of reducing power and total antioxidant capacity. However, these fractions were not effective against lipid peroxidation. The fraction FT presented higher activity on the APTT test at 200 μg (> 240 s). The assessment of the hemolytic activity showed that the FT fraction has the best activity, increasing lyses by the complement system to 42.3% (50 μg) (p< 0,001). The fraction FT showed the best yield, anticoagulant and hemolytic activity between the three fractions and therefore it was choose for the in vivo studies. The Inflammation assessment using the FT fraction (50 mg / kg MB) showed that the cellular migration and the IL-6 production increased 670.1% (p< 0,001) and 531.8% (p< 0,001), respectively. These results confirmed its use as an inflammation inducer in animal model. Cytotoxicity assay results showed that all fractions have toxic effects on 3T3 and HeLa cells after exposition of 48 hours, except when 100 μg for both F1 and FT were used. These results arise the discussion whether these polysaccharides it should be used as additive in foods, cosmetics and medicines.

Caracterização físico-química e ações farmacológicas hepatoprotetora, antiinflamatória, pró-angiogênica, antioxidante e anticoagulante da fração rica em fucana 0,8FRF 0,8 da alga marrom Lobophora variegata

This study examines the physical and chemical composition and the pharmacological effects of brown seaweed FRF 0.8 Lobophora variegata. Fractionation of the crude extract was done with the concentration of 0.8 volumes of acetone, obtaining the FRF 0.8. The physicochemical characterization showed that it was a fucana sulfated. Anti-inflammatory activity was assessed by paw edema model by the high rates of inhibition of the edema and the best results were in the fourth hour after induction (100 ± 1.4% at the dose of 75 mg / kg) and by the strong inhibitory activity of the enzyme myeloperoxidase (91.45% at the dose of 25 mg / kg). The hepataproteção was demonstrated by measurements of enzymatic and metabolic parameters indicative of liver damage, such as bilirubin (reduction in 68.81%, 70.68% and 68.21% for bilirubin total, direct and indirect, respectively at a dose of 75 mg / kg), ALT, AST and γ-GT (decrease of 76.93%, 44.58% and 50% respectively at a dose of 75 mg / kg) by analysis of histological slides of liver tissue, confirming that hepatoprotective effect the polymers of carbohydrates, showing a reduction in tissue damage caused by CCl4 and the inhibition of the enzyme complex of cytochrome P 450 (increasing sleep time in 54.6% and reducing the latency time in 71.43%). The effectiveness of the FRF 0.8 angiogenesis was examined in chorioallantoic membrane (CAM) of fertilized eggs, with the density of capillaries evaluated and scored, showing an effect proangigênico at all concentrations tested FRF (10 mg- 1000 mg). The FRF showed antioxidant activity on free radicals (by inhibiting Superoxide Radical in 55.62 ± 2.10%, Lipid Peroxidation in 100.15 ± 0.01%, Hydroxyl Radical in 41.84 ± 0.001% and 71.47 Peroxide in ± 2.69% at concentration of 0.62 mg / mL). The anticoagulant activity was observed with prolongation of activated partial thromboplastin time (aPTT) at 50 mg (> 240 s), showing that its action occurs in the intrinsic pathway of the coagulation cascade. Thus, our results indicate that these sulfated polysaccharides are an important pharmacological target

Efeitos do exercício físico aeróbio na modulação autonomica da frequência cardíaca de mulheres com sindrome dos ovários policisticos

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Diagnósticos de enfermagem em pacientes submetidos à hemodiálise: semelhanças entre o modelo de adaptação e a NANDA internacional

The nurses in the hemodialysis has an important role in the nursing process implementation, in the context of a theoretical referential. Among the nursing theories, highlights the Roy´s adaptations model, who considers a person as an holistic adaptive system that aims to adapt customers to different living conditions. Thus, it is believed that the Roy´s nursing process will guide nursing care to patients on dialysis. Therefore, the study aimed to analyze the nursing diagnosis present in patients with chronic kidney disease on hemodialysis based on the theoretical model of Roy and NANDA-International. Descriptive and cros-sectional study, performed at a dialysis center in a city in northeastern Brazil. Sample of 178 patients and consecutive sampling by convenience. Data collection ocurred from October/2011 until February/2012, through interview and physical examination forms. Data analysis was initiated by clinical reasoning, diagnosis judgment and similarity relation. Then, the data were entered into SPSS program, 16.0 version, generating descriptive statistics. The project was approved by the Ethics Research Committee (protocol nº 115/11) with a Presentation Certificate for Ethics Appreciation (in 0139.0.051.000-111) and was funded by the Universal edict MCT / CNPq 14/2010. The results revealed that most patients were male (52.2%), married (62.9%) and residents in the Natal´s metropolitan region (54.5%). The mean age was 46.6 years and the years of study, 8,5. Regarding nursing diagnosis obtained an average of 6.6, especially: Risk of Infection (100%), excessive fluid volume (99.4%) and hypothermia (61.8%). On the other hand the adaptive problems average was 6.4, and the most common: intracellular fluid retention (99.4%); Hyperkalemia (64.6%); Hypothermia (61.8%) and edema (53.9%). Were established 20 similarity relations between the NANDA-International nursing diagnosis and adaptive problems of Roy, namely: risk of falls / injury risk and potential for injury, impaired physical mobility and walking mobility and / or restricted coordination, dressing self-care deficit and loss of self-care ability; hypothermia and hypothermia; impaired skin integrity and impaired skin integrity; excessive fluid volume and intracellular fluid retention / Hyperkalemia / Hypocalcemia / edema; imbalanced nutrition: less than body requirements and Nutrition less than the body's needs; constipation and constipation, acute pain and acute pain, chronic pain and chronic pain, sensorial perception disturbed: visual, tactile and auditory disabilities and a primary sense: sight, hearing and tactile; sleep deprivation and insomnia, fatigue and intolerance to activities; ineffective self health and fails in the role; sexual dysfunction and sexual dysfunction; situational low self-esteem and low self-esteem, and diarrhea and diarrhea. We conclude that there is similarity between the typologies and was required a model´s analysis, because they present different ways to establish the nursing diagnosis. Moreover, the nursing process use, under the context of a theory and a classification system, subsidizes the care and contributes to the strengthening of nursing science

Controle adaptativo robusto para um modelo desacoplado de um robô móvel

This thesis presents a new structure of robust adaptive controller applied to mobile robots (surface mobile robot) with nonholonomic constraints. It acts in the dynamics and kinematics of the robot, and it is split in two distinct parts. The first part controls the robot dynamics, using variable structure model reference adaptive controllers. The second part controls the robot kinematics, using a position controller, whose objective is to make the robot to reach any point in the cartesian plan. The kinematic controller is based only on information about the robot configuration. A decoupling method is adopted to transform the linear model of the mobile robot, a multiple-input multiple-output system, into two decoupled single-input single-output systems, thus reducing the complexity of designing the controller for the mobile robot. After that, a variable structure model reference adaptive controller is applied to each one of the resulting systems. One of such controllers will be responsible for the robot position and the other for the leading angle, using reference signals generated by the position controller. To validate the proposed structure, some simulated and experimental results using differential drive mobile robots of a robot soccer kit are presented. The simulator uses the main characteristics of real physical system as noise and non-linearities such as deadzone and saturation. The experimental results were obtained through an C++ program applied to the robot soccer kit of Microrobot team at the LACI/UFRN. The simulated and experimental results are presented and discussed at the end of the text

Caracterização físico-química, reológica e sensorial de iogurte obtido pela mistura dos leites bubalino e caprino

Milk from different animals can be used for dairy production. Yoghurt is a popular fermented milk product and considered to be one of the greatest importance in terms of consumer acceptance and consumption. The present research deals with the production of strawberry set-type yoghurt by mixing goat and buffalo s milk and it has the objective of taking advantage of the intrinsic characteristics of each milk to produce a final product with desirable attributes. It was conducted by analyzing five experimental groups with different proportions of goat and buffalo s milk: C 100% goat s milk; 7C3B - 70% goat s milk and 30% buffalo s milk, 5C5B - 50% goat s milk and 50% buffalo s milk, 3C7B 30% goat s milk and 70% buffalo s milk; B - 100% buffalo s milk. Each group was evaluated for total solids content and the acidification profile was monitored every 30 minutes by pH analysis. The yoghurt samples were analyzed for physical-chemical (pH, acidity, protein, fat, total and reducing sugars, ash and total solids), rheological (syneresis and viscosity) and sensory characteristics (appearance, odor, consistency and flavour). Samples with higher percentual of bubaline milk reached Vm faster, but the time necessary for pH 4.6 (Te) were similar between groups. Statistical differences (p<0.05) were observed for fat and total solids content of yoghurt, with superior values for groups higher proportions of buffalo s milk. The parameters of behavior reached by the model of Ostwald of Waale pointed yoghurt samples as non-Newtonian and pseudoplastic fluids. Yoghurt made only with goat s milk (C) had higher values (p<0.05) for syneresis, which can be explained by its fragile coagulum. Additionally, this group also had the lowest sensory scores for the attributes consistence and taste, while bubaline yoghurt (B) obtained the best acceptance indexes for all of the appraised parameters

Obtenção de Propriedades Físico-Químicas de Misturas de Hidrocarbonetos em Baixa e Alta Pressão Visando a Caracterização e a Modelagem

The composition of petroleum may change from well to well and its resulting characteristics influence significantly the refine products. Therefore, it is important to characterize the oil in order to know its properties and send it adequately for processing. Since petroleum is a multicomponent mixture, the use of synthetic mixtures that are representative of oil fractions provides a better understand of the real mixture behavior. One way for characterization is usually obtained through correlation of physico-chemical properties of easy measurement, such as density, specific gravity, viscosity, and refractive index. In this work new measurements were obtained for density, specific gravity, viscosity, and refractive index of the following binary mixtures: n-heptane + hexadecane, cyclohexane + hexadecane, and benzene + hexadecane. These measurements were accomplished at low pressure and temperatures in the range 288.15 K to 310.95 K. These data were applied in the development of a new method of oil characterization. Furthermore, a series of measurements of density at high pressure and temperature of the binary mixture cyclohexane + n-hexadecane were performed. The ranges of pressure and temperature were 6.895 to 62.053 MPa and 318.15 to 413.15 K, respectively. Based on these experimental data of compressed liquid mixtures, a thermodynamic modeling was proposed using the Peng-Robinson equation of state (EOS). The EOS was modified with scaling of volume and a relatively reduced number of parameters were employed. The results were satisfactory demonstrating accuracy not only for density data, but also for isobaric thermal expansion and isothermal compressibility coefficients. This thesis aims to contribute in a scientific manner to the technological problem of refining heavy fractions of oil. This problem was treated in two steps, i.e., characterization and search of the processes that can produce streams with economical interest, such as solvent extraction at high pressure and temperature. In order to determine phase equilibrium data in these conditions, conceptual projects of two new experimental apparatus were developed. These devices consist of cells of variable volume together with a analytical static device. Therefore, this thesis contributed with the subject of characterization of hydrocarbons mixtures and with development of equilibrium cells operating at high pressure and temperature. These contributions are focused on the technological problem of refining heavy oil fractions

Efeito do exercício físico e estatinas na função muscular em animais com dislipidemia

As estatinas são utilizadas no tratamento das dislipidemias, com grande tolerância; no entanto, vários efeitos colaterais podem surgir, destacando-se miopatia. A prática regular do exercício físico (EF) produz modificações favoráveis no perfil lipídico; entretanto, pode gerar lesões musculares. OBJETIVO: Avaliar o efeito da associação entre exercício físico e estatinas na função muscular, pela análise histológica, em modelo experimental animal com dislipidemia. MÉTODOS: Foram utilizados 80 ratos machos Wistar, distribuídos em oito grupos, incluindo animais submetidos à dieta hipercolesterolêmica (DH), sinvastatina com (G1) e sem (G2) EF; DH e fluvastatina, com (G3) e sem EF (G4); alimentados com ração comercial (RC) na presença (G5) e ausência de (G6) EF; DH submetidos (G7) ou não (G8) a EF. A DH foi administrada por 90 dias, as estatinas e prática de EF em esteira rolante por oito semanas. Os animais foram sacrificados, e o músculo sóleo retirado para análise histológica. Aplicaram-se os testes t de Student pareado e análise multivariada, com nível significante para p < 0,05. RESULTADOS: As principais alterações histológicas encontradas foram fibras de diferentes diâmetros, atróficas, em degeneração, splitting, edema, infiltrado inflamatório. Essas alterações foram observadas em 90% dos animais do grupo G1, 80% do G2, 70% do G3, 30% do G4, 40% do G5 e 30% do G7. Nos grupos G6 e G8 identificaram-se fibras musculares com morfologia preservada. CONCLUSÕES: Na avaliação histológica muscular, a associação entre fluvastatina, sinvastatina e exercício físico acarreta alterações morfológicas com predomínio no uso da sinvastatina, variando de grau leve a grave, no músculo sóleo de ratos, induzidos pelos inibidores da HMG-CoA redutase.

Análise dos Processos de Flotação e Oxidação Avançada para o Tratamento de Efluente Modelo da Indústria do Petróleo

The generation of wastes in most industrial process is inevitable. In the petroleum industry, one of the greatest problems for the environment is the huge amount of produced water generated in the oil fields. This wastewater is a complex mixture and present great amounts. These effluents can be hazardous to the environmental without adequate treatment. This research is focused in the analysis of the efficiencies of the flotation and photo-oxidation processes to remove and decompose the organic compounds present in the produced water. A series of surfactants derivated from the laurilic alcohol was utilized in the flotation to promote the separation. The experiments have been performed with a synthetic wastewater, carefully prepared with xylene. The experimental data obtained using flotation presented a first order kinetic, identified by the quality of the linear data fitting. The best conditions were found at 0.029 g.L-1 for the surfactant EO 7, 0.05 g.L-1 for EO 8, 0.07 g.L-1 for EO 9, 0.045 g.L-1 for EO 10 and 0.08 g.L-1 for EO 23 with the following estimated kinetic constants: 0.1765, 0.1325, 0.1210, 0.1531 and 0.1699 min-1, respectively. For the series studied, the most suitablesurfactant was the EO 7 due to the lower reagent consumption, higher separation rate constant and higher removal efficiency of xylene in the aqueous phase (98%). Similarly to the flotation, the photo-Fenton process shows to be efficient for degradation of xylene and promoting the mineralization of the organic charge around 90% and 100% in 90 min

Desenvolvimento e teste de um modelo estatístico de identificação das proporções de água produzida em zonas de produção de um campo maduro de petróleo

This study investigates the chemical species produced water from the reservoir areas of oil production in the field of Monte Alegre (onshore production) with a proposal of developing a model applied to the identification of the water produced in different zones or groups of zones.Starting from the concentrations of anions and cátions from water produced as input parameters in Linear Discriminate Analysis, it was possible to estimate and compare the model predictions respecting the particularities of their methods in order to ascertain which one would be most appropriate. The methods Resubstitution, Holdout Method and Lachenbruch were used for adjustment and general evaluation of the built models. Of the estimated models for Wells producing water for a single production area, the most suitable method was the "Holdout Method and had a hit rate of 90%. Discriminant functions (CV1, CV2 and CV3) estimated in this model were used to modeling new functions for samples ofartificial mixtures of produced water (producedin our laboratory) and samples of mixtures actualproduced water (water collected inwellsproducingmore thanonezone).The experiment with these mixtures was carried out according to a schedule experimental mixtures simplex type-centroid also was simulated in which the presence of water from steam injectionin these tanks fora part of amostras. Using graphs of two and three dimensions was possible to estimate the proportion of water in the production area