Estimation methods of reference evapotranspiration (ETo) for Uberlândia -MG

One approach to verify the adequacy of estimation methods of reference evapotranspiration is the comparison with the Penman-Monteith method, recommended by the United Nations of Food and Agriculture Organization - FAO, as the standard method for estimating ET0. This study aimed to compare methods for estimating ET0, Makkink (MK), Hargreaves (HG) and Solar Radiation (RS), with Penman-Monteith (PM). For this purpose, we used daily data of global solar radiation, air temperature, relative humidity and wind speed for the year 2010, obtained through the automatic meteorological station, with latitude 18° 91' 66 S, longitude 48° 25' 05 W and altitude of 869m, at the National Institute of Meteorology situated in the Campus of Federal University of Uberlandia - MG, Brazil. Analysis of results for the period were carried out in daily basis, using regression analysis and considering the linear model y = ax, where the dependent variable was the method of Penman-Monteith and the independent, the estimation of ET0 by evaluated methods. Methodology was used to check the influence of standard deviation of daily ET0 in comparison of methods. The evaluation indicated that methods of Solar Radiation and Penman-Monteith cannot be compared, yet the method of Hargreaves indicates the most efficient adjustment to estimate ETo.

Comparison of different methods of erythrocyte dysmorphism analysis to determine the origin of hematuria

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characteristics, complexation and analytical methods of darunavir

What is it? Darunavir is a protease inhibitor used in the treatment of HIV infection. It is an important drug of therapy cocktail for patients infected with the virus. On the market there are darunavir ethanolate tablets of 75, 150, 300, 400, 600 and 800mg, because this is the most stable form. It is commercialized by Janssen-Cilag with the name PrezistaTM. Why we started? This drug has low water solubility and poor bioavailability, therefore requires administration in doses relatively high to the success of the therapeutic effect. The complexation of drugs by using cyclodextrin is welcome in this respect to improve the solubility and hence increase the dissolution rate of poorly soluble drugs. A monograph about this compound has not been described, thus it is an extremely important quality control of darunavir to demonstrate its effectiveness and safety. What we did? Some existing analytical techniques have been discussed in this manuscript, focusing on bioanalytical and pharmaceutical quality control applications. What we found? This review showed the published analytical methods reported for the determination of darunavir and discuss about its characteristics and complexation with cyclodextrin.

METHODS OF CONTROLLING COYOTES, BOBCATS, AND FOXES

In reviewing methods of predator control, it would first seem appropriate to define what is meant "by "methods" and what is meant by "control." Taking the last term first, control, as applied to the predatory coyotes, bobcats, and foxes, may be defined as regulating the numbers of these animals to the point where the economic losses for which they are responsible will be reduced to a practicable minimum. In some situations, area control, i.e., limiting the numbers of the offending predator over wide areas, may be necessary for satisfactory reduction of economic losses; in other situations, spot control or localized reduction of numbers of a certain predator may be called for; in still other situations, elimination of an individual animal may be all the control that is needed. In no sense is control, as applied to coyotes, bobcats, and foxes, intended to mean extermi¬nation of a species. The term "methods" is interpreted as meaning the procedures employed against coyotes, bobcats, and foxes, and not the broader systems of predator control such as the paid hunter system, the extension system, or the much-discredited bounty system. For an excellent review of the systems of predator control, see Latham (l).

METHODS OF CONTROLLING STARLINGS AND BLACKBIRDS

Most people have accepted the fact that all living things can be beneficial to mankind in some way or other. This is especially true of our wild birds, since they provide enjoyment and wholesome recreation for most of us, regardless of whether we live on farms or in the city. But despite the fact that wild birds are for the most part beneficial, at times individuals or populations of certain species can seriously affect man's interests. When such situations occur, some measures of relief are desirable and usually eagerly sought. This report is not intended to answer all the questions that may arise concerning problems with blackbirds and starlings; instead, it is merely a summary of measures used to protect agricultural crops from these birds.

Estimation methods of non-additive effects for characteristics of weight and scrotal circumference in crossbred beef cattle

The objective of this study was to investigate, in a population of crossbred cattle, the obtainment of the non-additive genetic effects for the characteristics weight at 205 and 390 days and scrotal circumference, and to evaluate the consideration of these effects in the prediction of breeding values of sires using different estimation methodologies. In method 1, the data were pre-adjusted for the non-additive effects obtained by least squares means method in a model that considered the direct additive, maternal and non-additive fixed genetic effects, the direct and total maternal heterozygosities, and epistasis. In method 2, the non-additive effects were considered covariates in genetic model. Genetic values for adjusted and non-adjusted data were predicted considering additive direct and maternal effects, and for weight at 205 days, also the permanent environmental effect, as random effects in the model. The breeding values of the categories of sires considered for the weight characteristic at 205 days were organized in files, in order to verify alterations in the magnitude of the predictions and ranking of animals in the two methods of correction data for the non-additives effects. The non-additive effects were not similar in magnitude and direction in the two estimation methods used, nor for the characteristics evaluated. Pearson and Spearman correlations between breeding values were higher than 0.94, and the use of different methods does not imply changes in the selection of animals.

Methods of body-mass reduction by combat sport athletes

The aim of this study was to investigate the methods adopted to reduce body mass (BM) in competitive athletes from the grappling (judo, jujitsu) and striking (karate and tae kwon do) combat sports in the state of Minas Gerais, Brazil. An exploratory methodology was employed through descriptive research, using a standardized questionnaire with objective questions self-administered to 580 athletes (25.0 +/- 3.7 yr, 74.5 +/- 9.7 kg, and 16.4% +/- 5.1% body fat). Regardless of the sport, 60% of the athletes reported using a method of rapid weight loss (RWL) through increased energy expenditure. Strikers tend to begin reducing BM during adolescence. Furthermore, 50% of the sample used saunas and plastic clothing, and only 26.1% received advice from a nutritionist. The authors conclude that a high percentage of athletes uses RWL methods. In addition, a high percentage of athletes uses unapproved or prohibited methods such as diuretics, saunas, and plastic clothing. The age at which combat sport athletes reduce BM for the first time is also worrying, especially among strikers.

Performance of fluorescence-based and conventional methods of occlusal caries detection in primary molars - an in vitro study

International Journal of Paediatric Dentistry 2012; 22: 459466 Aim. This in vitro study aimed to test the performance of fluorescence-based methods in detecting occlusal caries lesions in primary molars compared to conventional methods. Design. Two examiners assessed 113 sites on 77 occlusal surfaces of primary molars using three fluorescence devices: DIAGNOdent (LF), DIAGNOdent pen (LFpen), and fluorescence camera (VistaProof-FC). Visual inspection (ICDAS) and radiographic methods were also evaluated. One examiner repeated the evaluations after one month. As reference standard method, the lesion depth was determined after sectioning and evaluation in stereomicroscope. The area under the ROC curve (Az), sensitivity, specificity, and accuracy of the methods were calculated at enamel (D1) and dentine caries (D3) lesions thresholds. The intra and interexaminer reproducibility were calculated using the intraclass correlation coefficient (ICC) and kappa statistics. Results. At D1, visual inspection presented higher sensitivities (0.970.99) but lower specificities (0.180.25). At D3, all the methods demonstrated similar performance (Az values around 0.90). Visual and radiographic methods showed a slightly higher specificity (values higher than 0.96) than the fluorescence based ones (values around 0.88). In general, all methods presented high reproducibility (ICC higher than 0.79). Conclusions. Although fluorescence-based and conventional methods present similar performance in detecting occlusal caries lesions in primary teeth, visual inspection alone seems to be sufficient to be used in clinical practice.

The CUPID (Cultural and Psychosocial Influences on Disability) Study: Methods of Data Collection and Characteristics of Study Sample

Background: The CUPID (Cultural and Psychosocial Influences on Disability) study was established to explore the hypothesis that common musculoskeletal disorders (MSDs) and associated disability are importantly influenced by culturally determined health beliefs and expectations. This paper describes the methods of data collection and various characteristics of the study sample. Methods/Principal Findings: A standardised questionnaire covering musculoskeletal symptoms, disability and potential risk factors, was used to collect information from 47 samples of nurses, office workers, and other (mostly manual) workers in 18 countries from six continents. In addition, local investigators provided data on economic aspects of employment for each occupational group. Participation exceeded 80% in 33 of the 47 occupational groups, and after pre-specified exclusions, analysis was based on 12,426 subjects (92 to 1018 per occupational group). As expected, there was high usage of computer keyboards by office workers, while nurses had the highest prevalence of heavy manual lifting in all but one country. There was substantial heterogeneity between occupational groups in economic and psychosocial aspects of work; three-to fivefold variation in awareness of someone outside work with musculoskeletal pain; and more than ten-fold variation in the prevalence of adverse health beliefs about back and arm pain, and in awareness of terms such as "repetitive strain injury" (RSI). Conclusions/Significance: The large differences in psychosocial risk factors (including knowledge and beliefs about MSDs) between occupational groups should allow the study hypothesis to be addressed effectively.

Evaluating different methods of microarray data normalization

Abstract Background With the development of DNA hybridization microarray technologies, nowadays it is possible to simultaneously assess the expression levels of thousands to tens of thousands of genes. Quantitative comparison of microarrays uncovers distinct patterns of gene expression, which define different cellular phenotypes or cellular responses to drugs. Due to technical biases, normalization of the intensity levels is a pre-requisite to performing further statistical analyses. Therefore, choosing a suitable approach for normalization can be critical, deserving judicious consideration. Results Here, we considered three commonly used normalization approaches, namely: Loess, Splines and Wavelets, and two non-parametric regression methods, which have yet to be used for normalization, namely, the Kernel smoothing and Support Vector Regression. The results obtained were compared using artificial microarray data and benchmark studies. The results indicate that the Support Vector Regression is the most robust to outliers and that Kernel is the worst normalization technique, while no practical differences were observed between Loess, Splines and Wavelets. Conclusion In face of our results, the Support Vector Regression is favored for microarray normalization due to its superiority when compared to the other methods for its robustness in estimating the normalization curve.

Study of innovative methods of control in the cereal productive chain for the production of beer and spirits

Researches performed during the PhD course intended to assess innovative applications of near-infrared spectroscopy in reflectance (NIR) in the production chain of beer. The purpose is to measure by NIR the "malting quality" (MQ) parameter of barley, to monitor the malting process and to know if a certain type of barley is suitable for the production of beer and spirits. Moreover, NIR will be applied to monitor the brewing process. First of all, it was possible to check the quality of the raw materials like barley, maize and barley malt using a rapid, non-destructive and reliable method, with a low error of prediction. The more interesting result obtained at this level was that the repeatability of the NIR calibration models developed was comparable with the one of the reference method. Moreover, about malt, new kinds of validation were used in order to estimate the real predictive power of the proposed calibration models and to understand the long-term effects. Furthermore, the precision of all the calibration models developed for malt evaluation was estimated and statistically compared with the reference methods, with good results. Then, new calibration models were developed for monitoring the malting process, measuring the moisture content and other malt quality parameters during germination. Moreover it was possible to obtain by NIR an estimate of the "malting quality" (MQ) of barley and to predict whether if its germination will be rapid and uniform and if a certain type of barley is suitable for the production of beer and spirits. Finally, the NIR technique was applied to monitor the brewing process, using correlations between NIR spectra of beer and analytical parameters, and to assess beer quality. These innovative results are potentially very useful for the actors involved in the beer production chain, especially the calibration models suitable for the control of the malting process and for the assessment of the “malting quality” of barley, which need to be deepened in future studies.

Development of instrumental and sensory analytical methods of food obtained by traditional and emerging technologies

The consumer demand for natural, minimally processed, fresh like and functional food has lead to an increasing interest in emerging technologies. The aim of this PhD project was to study three innovative food processing technologies currently used in the food sector. Ultrasound-assisted freezing, vacuum impregnation and pulsed electric field have been investigated through laboratory scale systems and semi-industrial pilot plants. Furthermore, analytical and sensory techniques have been developed to evaluate the quality of food and vegetable matrix obtained by traditional and emerging processes. Ultrasound was found to be a valuable technique to improve the freezing process of potatoes, anticipating the beginning of the nucleation process, mainly when applied during the supercooling phase. A study of the effects of pulsed electric fields on phenol and enzymatic profile of melon juice has been realized and the statistical treatment of data was carried out through a response surface method. Next, flavour enrichment of apple sticks has been realized applying different techniques, as atmospheric, vacuum, ultrasound technologies and their combinations. The second section of the thesis deals with the development of analytical methods for the discrimination and quantification of phenol compounds in vegetable matrix, as chestnut bark extracts and olive mill waste water. The management of waste disposal in mill sector has been approached with the aim of reducing the amount of waste, and at the same time recovering valuable by-products, to be used in different industrial sectors. Finally, the sensory analysis of boiled potatoes has been carried out through the development of a quantitative descriptive procedure for the study of Italian and Mexican potato varieties. An update on flavour development in fresh and cooked potatoes has been realized and a sensory glossary, including general and specific definitions related to organic products, used in the European project Ecropolis, has been drafted.

Development of synthetic methods of silicon nanocrystals functionalized with photoactive molecules

The thesis is focused on the development of a method for the synthesis of silicon nanocrystals with different sizes, narrow size distribution, good optical properties and stability in air. The resulting silicon nanocrystals have been covalently functionalized with different chromophores with the aim to exploit the new electronic and chemical properties that emerge from the interaction between silicon nanocrystal surface and ligands. The purpose is to use these chromophores as light harvesting antennae, increasing the optical absorption of silicon nanocrystals. Functionalized silicon nanocrystals have been characterized with different analytical techniques leading to a good knowledge of optical properties of semiconductor quantum dots.

Conceptual and normative issues of memory enhancement

Our growing understanding of human mind and cognition and the development of neurotechnology has triggered debate around cognitive enhancement in neuroethics. The dissertation examines the normative issues of memory enhancement, and focuses on two issues: (1) the distinction between memory treatment and enhancement; and (2) how the issue of authenticity concerns memory interventions, including memory treatments and enhancements. rnThe first part consists of a conceptual analysis of the concepts required for normative considerations. First, the representational nature and the function of memory are discussed. Memory is regarded as a special form of self-representation resulting from a constructive processes. Next, the concepts of selfhood, personhood, and identity are examined and a conceptual tool—the autobiographical self-model (ASM)—is introduced. An ASM is a collection of mental representations of the system’s relations with its past and potential future states. Third, the debate between objectivist and constructivist views of health are considered. I argue for a phenomenological account of health, which is based on the primacy of illness and negative utilitarianism.rnThe second part presents a synthesis of the relevant normative issues based on the conceptual tools developed. I argue that memory enhancement can be distinguished from memory treatment using a demarcation regarding the existence of memory-related suffering. That is, memory enhancements are, under standard circumstances and without any unwilling suffering or potential suffering resulting from the alteration of memory functions, interventions that aim to manipulate memory function based on the self-interests of the individual. I then consider the issue of authenticity, namely whether memory intervention or enhancement endangers “one’s true self”. By analyzing two conceptions of authenticity—authenticity as self-discovery and authenticity as self-creation, I propose that authenticity should be understood in terms of the satisfaction of the functional constraints of an ASM—synchronic coherence, diachronic coherence, and global veridicality. This framework provides clearer criteria for considering the relevant concerns and allows us to examine the moral values of authenticity. rn