A study of corporate social responsibility disclosure practices in Saudi Arabia

This paper analyses changes in corporate social responsibility (CSR) reporting practices among Saudi listed companies in the past three years. Using content analysis methodology of annual reports, a sample of 174 annual reports representing 58 Saudi listed companies from different sectors were analysed to investigate the extent of the level of CSR disclosure in the years 2010 to 2012. Our paper focuses on trends of CSR information in the four categories: Environment; Employee; Community and Customer. In developing countries, the CSR disclosure studies are limited and in the case of Saudi Arabia. Overall a significant increase in CSR reporting was observed over that period despite the fact that private-sector companies are still in the early stages of awareness as far as integrating CSR activities into their corporate policies and strategies is concerned.

Thin, fine and with sensitivity: a metamethodology of intuitions

Do philosophers use intuitions? Should philosophers use intuitions? Can philosophical methods (where intuitions are concerned) be improved upon? In order to answer these questions we need to have some idea of how we should go about answering them. I defend a way of going about methodology of intuitions: a metamethodology. I claim the following: (i) we should approach methodological questions about intuitions with a thin conception of intuitions in mind; (ii) we should carve intuitions finely; and, (iii) we should carve to a grain to which we are sensitive in our everyday philosophising. The reason is that, unless we do so, we don’t get what we want from philosophical methodology. I argue that what we want is information that will aid us in formulating practical advice concerning how to do philosophy responsibly/well/better.

A comparative corpus-assisted discourse study of the representations of hosts in promotional tourism discourse

Most studies concerned with the representations of local people in tourism discourse point to the prevalence of stereotypic images asserting that contemporary tourism perpetuates colonial legacy and gendered discursive practices. This claim has been, to some extent, contested in research that explores representations of hosts in local tourism materials claiming that tourism can also discursively resist the dominant Western imagery. While the evidence for the existence of hegemonic and diverging discourses about the local ‘Other’ seems compelling, the empirical basis of this research is rather small and often limited to one geographic context. The present study addresses these shortcomings by examining representations of hosts in a larger corpus of promotional tourism materials including texts produced by Western and local tourism industries. The data is investigated using the methodology of Corpus-Assisted Discourse Studies (CADS). By comparing external with internal (self) representations, this study verifies and refines some of the claims on the subject and offers a much more nuanced picture of representations that defies the black and white scenarios proposed in previous research

Robust comparison of climate models with observations using blended land air and ocean sea surface temperatures

The level of agreement between climate model simulations and observed surface temperature change is a topic of scientific and policy concern. While the Earth system continues to accumulate energy due to anthropogenic and other radiative forcings, estimates of recent surface temperature evolution fall at the lower end of climate model projections. Global mean temperatures from climate model simulations are typically calculated using surface air temperatures, while the corresponding observations are based on a blend of air and sea surface temperatures. This work quantifies a systematic bias in model-observation comparisons arising from differential warming rates between sea surface temperatures and surface air temperatures over oceans. A further bias arises from the treatment of temperatures in regions where the sea ice boundary has changed. Applying the methodology of the HadCRUT4 record to climate model temperature fields accounts for 38% of the discrepancy in trend between models and observations over the period 1975–2014.

Reappraisal of the effective elastic thickness for the sub-Andes using 3-D finite element flexural modelling, gravity and geological constraints

P>Estimates of effective elastic thickness (T(e)) for the western portion of the South American Plate using, independently, forward flexural modelling and coherence analysis, suggest different thermomechanical properties for the same continental lithosphere. We present a review of these T(e) estimates and carry out a critical reappraisal using a common methodology of 3-D finite element method to solve a differential equation for the bending of a thin elastic plate. The finite element flexural model incorporates lateral variations of T(e) and the Andes topography as the load. Three T(e) maps for the entire Andes were analysed: Stewart & Watts (1997), Tassara et al. (2007) and Perez-Gussinye et al. (2007). The predicted flexural deformation obtained for each T(e) map was compared with the depth to the base of the foreland basin sequence. Likewise, the gravity effect of flexurally induced crust-mantle deformation was compared with the observed Bouguer gravity. T(e) estimates using forward flexural modelling by Stewart & Watts (1997) better predict the geological and gravity data for most of the Andean system, particularly in the Central Andes, where T(e) ranges from greater than 70 km in the sub-Andes to less than 15 km under the Andes Cordillera. The misfit between the calculated and observed foreland basin subsidence and the gravity anomaly for the Maranon basin in Peru and the Bermejo basin in Argentina, regardless of the assumed T(e) map, may be due to a dynamic topography component associated with the shallow subduction of the Nazca Plate beneath the Andes at these latitudes.

On a uniform turnpike of the third kind in the Robinson-Solow-Srinivasan model

On using McKenzie’s taxonomy of optimal accumulation in the longrun, we report a “uniform turnpike” theorem of the third kind in a model original to Robinson, Solow and Srinivasan (RSS), and further studied by Stiglitz. Our results are presented in the undiscounted, discrete-time setting emphasized in the recent work of Khan-Mitra, and they rely on the importance of strictly concave felicity functions, or alternatively, on the value of a “marginal rate of transformation”, ξσ, from one period to the next not being unity. Our results, despite their specificity, contribute to the methodology of intertemporal optimization theory, as developed in economics by Ramsey, von Neumann and their followers.

Application of X-ray technique in nondestructive evaluation of eucalypt wood

X-rays were initially used for the inspection of special-purpose wood pieces for quantitative evaluation properties of different species. X-ray densitometry has had its use expanded ill dendroclimatology of Picea engelmannii trees. Subsequent laboratories developed applications of X-ray densitometry for environmental, wood science and technology, and related areas. This paper describes the basic methodology of X-ray densitometry applied to the eucalypt wood analysis, as well its presenting the results of applications in three areas: (i) evaluation of wood biodegradation by white rot fungi, (ii) detection of sapwood and heartwood, and (iii) determination of the effect of management oil wood properties. The wood decayed by white rot fungi was detected by X-ray densitometry with it decreasing wood density due to the biodegradation of cell wall components. The sapwood and heartwood of eucalypts were separated in response to the attenuation of X-rays, reflected by the wood anatomical structure and chemical composition. Also, Ill eucalypt trees after the application of irrigation and i characteristic wood density profiles were detected. Ill addition, the significant potential of X-ray densitometry for eucalypt wood research and analysis is discussed.

Voltammetric Studies of Cobalt Hexacyanoferrate Formed on the Titanium (IV) Phosphate Surface and its Application to the Determination of Sulfite

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Preparation and Voltammetric Studies of Titanium (IV) Phosphate Modified with Silver Hexacyanoferrate to a Voltammetric Determination of L-Cysteine

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

In vitro antifungal susceptibility of Candida spp. oral isolates from HIV-positive patients and control individuals

Oropharyngeal candidiasis is the most common fungal infection among HIV-positive patients. This condition can be treated with either systemic or topical antifungal agents; treatments are usually indicated empirically on the basis of clinical data. The knowledge of in vitro antifungal susceptibility is important to determine correct therapeutic guides for the treatment of fungal infections. Therefore, the objective of this study was to determine the antifungal susceptibility profile of oral Candida isolates from HIV-positive patients and control individuals. Amphotericin B, fluconazole, flucytosine, nystatin and ketoconazole were tested according to the methodology of microdilution proposed by the Clinical and Laboratory Standards Institute (CLSI); results were recorded in values of minimal inhibitory concentration (MIC). A total of 71 Candida isolates from HIV-positive patients were examined with the following species represented: C. albicans (59), C. tropicalis (9), C. glabrata (1), C. guilliermondii (1) and C. krusei (1). A total of 15 Candida isolates were evaluated from control individuals comprised of 11 C. albicans and 4 C. tropicalis samples. Our results demonstrated that the tested antifungal agents showed good activity for most isolates from both groups; however, variability in MIC values among isolates was observed.

USE OF PROGENY TESTING IN BEEF-CATTLE - PREDICTION OF GENETIC GAIN IN A NELORE CATTLE-BREEDING PROGRAM

Genetic gains predicted for selection, based on both individual performance and progeny testing, were compared to provide information to be used in implementation of progeny testing for a Nelore cattle breeding program. The prediction of genetic gain based on progeny testing was obtained from a formula, derived from methodology of Young and weller (J. Genetics 57: 329-338, 1960) for two-stage selection, which allows prediction of genetic gain per generation when the individuals under test have been pre-selected on the basis of their own performance. The application of this formula also allowed determination of the number of progeny per tested bull needed to maximize genetic gain, when the total number of tested progeny is limited.

Conformational analysis: A new approach by means of chemometrics

In conformational analysis, the systematic search method completely maps the space but suffers from the combinatorial explosion problem because the number of conformations increases exponentially with the number of free rotation angles. This study introduces a new methodology of conformational analysis that controls the combinatorial explosion. It is based on a dimensional reduction of the system through the use of principal component analysis. The results are exactly the same as those obtained for the complete search but, in this case, the number of conformations increases only quadratically with the number of free rotation angles. The method is applied to a series of three drugs: omeprazole. pantoprazole, lansoprazole-benzimidazoles that suppress gastric-acid secretion by means of H(+), K(+)-ATPase enzyme inhibition. (C) 2002 John Wiley Sons. Inc.

Comparison of different clean-up procedures for the determination of N-methylcarbamate insecticides in vegetable matrices by high-performance liquid chromatography with UV detection

Several clean-up procedures which included the use of glass chromatography columns (silica gel, alumina, Florisil, silanized Celite-charcoal), Sep-Pak cartridges and standard solutions were compared for the determination of the following N-methylcarbamate (NMC) insecticides: aldicarb, carbaryl, carbofuran, methomyl and propoxur. According to recovery results of the compounds after elution in a glass column, the most efficient systems employed 4.6% deactivated alumina and a silanized Celite-charcoal (4:1) as adsorbents, using dichloromethane-methanol (99:1) and toluene-acetonitrile (75:25) mixtures, respectively, as binary eluents. The recoveries of the compounds studied varied from 84 to 120%. Comparable recoveries (75-100%) for Sep-Pak cartridges in normal phase (NH2, CN) and reversed phase (C-8) were observed. Different temperatures were tested during the concentration step in a rotary evaporator, and we verified a strong influence of this parameter on the stability of some compounds, such as carbofuran and carbaryl. Recovery studies employing the best clean up procedures were performed at the Brazilian agricultural level in potato and carrot samples; Validation methodology of the US Food and Drug Administration was adapted for the N-methylcarbamate analysis. Their recoveries ranged between 79 and 93% with coefficients of variation of 2.3-8%. (C) 1998 Elsevier B.V. B.V.

Efficiency of geotextile filters in dewatering wastes (sludge) from water treatment works

This paper evaluates the efficiency of geotextile filters for sludge from a compact water treatment plant (WTP). The key aspects required in the methodology of selection and designing geotextile filters for sludge from dewatering was investigated based on laboratory tests results. The analyses were supported by the measured filtrated volume of water and turbidity resulting from variable head permeability tests carried out in two geotextiles and using the conventional granular filter (sand and gravel). The results of the present study showed that more than 75% of the dewatering sludge can be filtrated with low turbidity, which permits that this water can return to the treatment plan in order to be reuse in another cycle. The reduced volume of sludge retained by the geotextile that is transferred to the drying pound increases its efficiency by reducing the drying time. The low volume of the dry waste can be removed and the geotextile can be easily cleaned or replaced when needed. These procedures significantly reduce the volume of water needed in dewatering and also avoids waste discharges in the environment.

Characterization of glycerol kinase from baker's yeast: Response surface modeling of the enzymatic reaction

The present study describes a methodology of dosage of glycerol kinase (GK) from baker's yeast. The standardization of the activity of the glycerol kinase from baker's yeast was accomplished using the diluted enzymatic preparation containing glycerol phosphate oxidase (GPO) and glycerol kinase. The mixture was incubated at 60 degrees C by 15 min and the reaction was stopped by the SDS solution addition. A first set of experiments was carried out in order to investigate the individual effect of temperature (7), pH and substrate concentration (S), on GK activity and stability. The pH and temperature stability tests showed that the enzyme presented a high stability to pH 6.0-8.0 and the thermal stability were completely maintained up to 50 degrees C during 1 h. The K(m) of the enzyme for glycerol was calculated to be 2 mM and V(max) to be 1.15 U/mL. In addition, modeling and optimization of reaction conditions was attempted by response surface methodology (RSM). Higher activity values will be attained at temperatures between 52 and 56 degrees C, pH around 10.2-10.5 and substrate concentrations from 150 to 170 mM.This low cost method for glycerol kinase dosage in a sequence of reactions is of great importance for many industries, like food, sugar and alcohol. RSM showed to be an adequate approach for modeling the reaction and optimization of reaction conditions to maximize glycerol kinase activity. (C) 2007 Elsevier B.V. All rights reserved.