Simulation of the load-unload response ratio and critical sensitivity in the lattice solid model

The Load-Unload Response Ratio (LURR) method is an intermediate-term earthquake prediction approach that has shown considerable promise. It involves calculating the ratio of a specified energy release measure during loading and unloading where loading and unloading periods are determined from the earth tide induced perturbations in the Coulomb Failure Stress on optimally oriented faults. In the lead-up to large earthquakes, high LURR values are frequently observed a few months or years prior to the event. These signals may have a similar origin to the observed accelerating seismic moment release (AMR) prior to many large earthquakes or may be due to critical sensitivity of the crust when a large earthquake is imminent. As a first step towards studying the underlying physical mechanism for the LURR observations, numerical studies are conducted using the particle based lattice solid model (LSM) to determine whether LURR observations can be reproduced. The model is initialized as a heterogeneous 2-D block made up of random-sized particles bonded by elastic-brittle links. The system is subjected to uniaxial compression from rigid driving plates on the upper and lower edges of the model. Experiments are conducted using both strain and stress control to load the plates. A sinusoidal stress perturbation is added to the gradual compressional loading to simulate loading and unloading cycles and LURR is calculated. The results reproduce signals similar to those observed in earthquake prediction practice with a high LURR value followed by a sudden drop prior to macroscopic failure of the sample. The results suggest that LURR provides a good predictor for catastrophic failure in elastic-brittle systems and motivate further research to study the underlying physical mechanisms and statistical properties of high LURR values. The results provide encouragement for earthquake prediction research and the use of advanced simulation models to probe the physics of earthquakes.

Simulation of the micro-physics of rocks using LSMearth

The particle-based Lattice Solid Model (LSM) was developed to provide a basis to study the physics of rocks and the nonlinear dynamics of earthquakes (MORA and PLACE, 1994; PLACE and MORA, 1999). A new modular and flexible LSM approach has been developed that allows different microphysics to be easily included in or removed from the model. The approach provides a virtual laboratory where numerical experiments can easily be set up and all measurable quantities visualised. The proposed approach provides a means to simulate complex phenomena such as fracturing or localisation processes, and enables the effect of different micro-physics on macroscopic behaviour to be studied. The initial 2-D model is extended to allow three-dimensional simulations to be performed and particles of different sizes to be specified. Numerical bi-axial compression experiments under different confining pressure are used to calibrate the model. By tuning the different microscopic parameters (such as coefficient of friction, microscopic strength and distribution of grain sizes), the macroscopic strength of the material and can be adjusted to be in agreement with laboratory experiments, and the orientation of fractures is consistent with the theoretical value predicted based on Mohr-Coulomb diagram. Simulations indicate that 3-D numerical models have different macroscopic properties than in 2-D and, hence, the model must be recalibrated for 3-D simulations. These numerical experiments illustrate that the new approach is capable of simulating typical rock fracture behaviour. The new model provides a basis to investigate nucleation, rupture and slip pulse propagation in complex fault zones without the previous model limitations of a regular low-level surface geometry and being restricted to two-dimensions.

Distribution of two splice variants of the glutamate transporter GLT-1 in rat brain and pituitary

We have performed immunocytochemistry on rat brains using a highly specific antiserum directed against the originally described form of the glutamate transporter GLT-1 (referred to hereafter as GLT-1alpha), and another against a C-terminal splice variant of this protein, GLT-1B. Both forms of GLT-1 were abundant in rat brain, especially in regions such as the hippocampus and cerebral cortex, and macroscopic examination of sections suggested that both forms were generally regionally coexistent. However, disparities were evident; GLT-1alpha was present in the intermediate lobe of the pituitary gland, whereas GLT-1B was absent. Similar marked disparities were also noted in the external capsule, where GLT1A labeling was abundant but GLT-1B was only occasionally encountered. Conversely, GLT-1B was more extensively distributed, relative to GLT-1alpha, in areas such as the deep cerebellar nuclei. In most regions, such as the olfactory bulbs, both splice variants were present but differences were evident in their distribution. In cerebral cortex, patches were evident where GLT-1B was absent, whereas no such patches were evident for GLT-1alpha. At high resolution, other discrepancies were evident; double-labeling of areas such as hippocampus indicated that the. two splice variants may either be differentially expressed by closely apposed glial elements or that the two splice variants may be differentially targeted to distinct membrane domains of individual glial cells. (C) 2002 Wiley-Liss, Inc.

Biaxial failure model for fiber reinforced concrete

Steel fiber reinforced concrete (SFRC) is widely applied in the construction industry. Numerical elastoplastic analysis of the macroscopic behavior is complex. This typically involves a piecewise linear failure curve including corner singularities. This paper presents a single smooth biaxial failure curve for SFRC based on a semianalytical approximation. Convexity of the proposed model is guaranteed so that numerical problems are avoided. The model has sufficient flexibility to closely match experimental results. The failure curve is also suitable for modeling plain concrete under biaxial loading. Since this model is capable of simulating the failure states in all stress regimes with a single envelope, the elastoplastic formulation is very concise and simple. The finite element implementation is developed to demonstrate the conciseness and the effectiveness of the model. The computed results display good agreement with published experimental data.

Prospecção de toxicidade de fungicidas por análises macroscópicas, microscópicas e moleculares em Allium cepa

Apesar dos benefícios econômicos dos agrotóxicos para a agricultura, os efeitos negativos à saúde humana e ao meio ambiente são questionados. Dentre os agroquímicos que são usados na agricultura, destacam-se os fungicidas, que são utilizados em grande quantidade nas lavouras para controle de doenças. Com intuito de verificar os danos ocasionados por esses compostos, diversos métodos de avaliação têm sido utilizados na análise de toxicidade e mutagenicidade dos agrotóxicos. As análises macroscópicas (germinação e crescimento radicular) e microscópicas (índice mitótico, aberrações cromossômicas e nucleares) são importantes na determinação da toxicidade de compostos lançados ao meio ambiente, porque permite averiguar danos na germinação, no desenvolvimento da plântula e no ciclo celular. No entanto, para melhor compreensão dos mecanismos moleculares da mutação e de seus efeitos sobre a população exposta à contaminação ambiental, os marcadores moleculares oferecem perspectivas, por medir o efeito direto da exposição sobre o DNA. O objetivo do trabalho foi avaliar o potencial tóxico dos fungicidas por análises macroscópicas, microscópicas e moleculares em Allium cepa. Os resultados indicam redução nos parâmetros de germinação, crescimento radicular e índice mitótico nas maiores concentrações para os princípios ativos difenoconazol, tebuconazol, procimidona e iprodiona, quando comparados ao controle negativo, mostrando que os princípios apresentaram efeito genotóxico, citotóxico, fitotóxico para as raízes de Allium cepa pela alta frequência de aberrações cromossômicas, nucleares e redução do índice mitótico. Os resultados moleculares indicaram mudança no perfil de amplificação dos primers SSR (Sequência Simples Repetitiva) e o ISSR (Inter Sequência Simples Repetitiva), após a exposição do Allium cepa aos princípios ativos, incluindo alterações na perda, ganho e mudança na intensidade de banda. A perda e o ganho de bandas aconteceram à medida que aumentou a concentração dos princípios ativos. O método de agrupamento e as distâncias e dissimilaridades mostraram relação de dose-dependência, pois conseguiu separar as maiores concentrações do controle negativo para os princípios ativos no ISSR e SSR, com exceção dos princípios procimidona e iprodiona no SSR. Esses dados indicam que possui relação entre as análises utilizadas, sendo indicadores confiáveis para detectar alterações por substâncias químicas. Os marcadores moleculares ISSR e SSR são ferramentas eficientes em avaliar alterações ocasionadas no DNA por fungicidas podendo ser utilizada em estudos de toxicidade.

Multi-scale modeling of the mechanical behavior of polymer-based materials

Polymers have become the reference material for high reliability and performance applications. In this work, a multi-scale approach is proposed to investigate the mechanical properties of polymeric based material under strain. To achieve a better understanding of phenomena occurring at the smaller scales, a coupling of a Finite Element Method (FEM) and Molecular Dynamics (MD) modeling in an iterative procedure was employed, enabling the prediction of the macroscopic constitutive response. As the mechanical response can be related to the local microstructure, which in turn depends on the nano-scale structure, the previous described multi-scale method computes the stress-strain relationship at every analysis point of the macro-structure by detailed modeling of the underlying micro- and meso-scale deformation phenomena. The proposed multi-scale approach can enable prediction of properties at the macroscale while taking into consideration phenomena that occur at the mesoscale, thus offering an increased potential accuracy compared to traditional methods.

Predicting the mechanical behavior of amorphous polymeric materials under strain through multi-scale simulation

Polymeric materials have become the reference material for high reliability and performance applications. However, their performance in service conditions is difficult to predict, due in large part to their inherent complex morphology, which leads to non-linear and anisotropic behavior, highly dependent on the thermomechanical environment under which it is processed. In this work, a multiscale approach is proposed to investigate the mechanical properties of polymeric-based material under strain. To achieve a better understanding of phenomena occurring at the smaller scales, the coupling of a finite element method (FEM) and molecular dynamics (MD) modeling, in an iterative procedure, was employed, enabling the prediction of the macroscopic constitutive response. As the mechanical response can be related to the local microstructure, which in turn depends on the nano-scale structure, this multiscale approach computes the stress-strain relationship at every analysis point of the macro-structure by detailed modeling of the underlying micro- and meso-scale deformation phenomena. The proposed multiscale approach can enable prediction of properties at the macroscale while taking into consideration phenomena that occur at the mesoscale, thus offering an increased potential accuracy compared to traditional methods.

Mechatronic system for ABO human blood typing

In medical emergency situations, when a patient needs a blood transfusion, the universal blood type O− is administered. This procedure may lead to the depletion of stock reserves of O− blood. Nowadays, there is no commercial equipment capable of determining the patient's blood type in situ, in a fast and reliable process. Human blood typing is usually performed through the manual test, which involves a macroscopic observation and interpretation of the results by an analyst. This test, despite of having a fast response time, may lead to human errors, which sometimes can be fatal to the patient. This paper presents the development of an automatic mechatronic prototype for determining human blood typing (ABO and Rh systems) through image processing techniques. The prototype design takes into account the characteristics of reliability of analysis, portability, and response time allowing the system to be used in emergency situations. The developed prototype performs blood and reagents mixture acquires the resultant image and processes the data (based on image processing techniques) to determine the sample blood type. It was tested in a laboratory, using cataloged samples of blood types, provided by the Portuguese Institute of Blood and Transplantation. Hereafter, it is expected to test and validate the prototype in clinical environments.

Formaldehyde's genotoxicity effects in pathology anatomy technologists and medical pathologists

Formaldehyde (FA) had been considered to be carcinogenic by the International Agency for Research on Cancer (group1), on the basis of sufficient evidence both in humans and in experimental animals, making it a subject of major environmental concern, especially in the occupational context. Manifold in vitro studies clearly indicated that FA is genotoxic, inducing various genotoxic effects in proliferating cultured mammalian cells. Cytokinesis-blocked micronucleus (CBMN) assay is used extensively in molecular epidemiology, and the chromosomal alterations most reported and studied by the CBMN are: micronucleus (MN), nucleoplasmic bridges (NPB) and nuclear buds (NBUDs). The pathology anatomy laboratories are work places that manipulate routinely FA and pathology anatomy technologists and pathologists contact daily with this chemical compound particularly in the macroscopic exam and grossing procedures. The aim of this study was to identify genotoxicity biomarkers in the set workers groups, such as micronucleus (MN), nucleoplasmic bridges (NPB) and nuclear buds (NBUD) in peripheral blood lymphocytes.

Exposição ocupacional a formaldeído: avaliação da exposição e efeitos genotóxicos

O formaldeído (FA) foi classificado, em 2004, pela International Agency for Cancer Research como agente cancerígeno. Este agente químico ocupa a 25ª posição em toda a produção química dos Estados Unidos da América, com mais de 5 milhões de toneladas produzidas por ano. Devido à sua importância económica e uso diversificado, muitos indivíduos estão expostos profissionalmente a FA. Com o estudo desenvolvido pretendeu‑se avaliar a exposição a FA em dois contextos ocupacionais distintos – na produção de FA e resinas e em laboratórios de anatomia patológica (AP) e relacionar com eventuais efeitos para a saúde, comparando a frequência de micronúcleos (MN) em linfócitos do sangue periférico e em células esfoliadas da mucosa bucal dos trabalhadores expostos a FA com indivíduos não expostos (controlos). Como amostra foram estudados 80 trabalhadores ocupacionalmente expostos a FA: 30 trabalhadores da fábrica de produção de FA e resinas e 50 trabalhadores de 10 laboratórios de AP. Foi constituído um grupo controlo de 85 indivíduos com atividades profissionais que não envolviam a exposição a formaldeído ou qualquer outro agente químico com propriedades genotóxicas. Aplicaram‑se duas metodologias distintas de avaliação ambiental do FA com o objetivo de conhecer a exposição profissional. Compararam‑se os resultados obtidos com os valores limite para a exposição média ponderada (TLV‑TWA=0,75 ppm) e para a concentração máxima (VLE‑CM=0,3 ppm). A totalidade dos laboratórios apresentou resultados superiores ao valor de referência existente para a concentração máxima. Nenhum dos resultados obtidos para a exposição média ponderada foi superior ao valor de referência. O exame macroscópico obteve os valores das concentrações máximas mais elevadas em 90% dos laboratórios. Os valores de MN foram mais elevados nos indivíduos expostos a FA comparativamente com os controlos. No caso dos MN nos linfócitos, a média foi de 3,96 nos expostos e de 0,81 nos não expostos. Os MN nas células esfoliadas da boca apresentaram uma média de 0,96 nos expostos e de 0,16 nos controlos. Os resultados obtidos nesta acção de biomonitorização podem revelar‑se particularmente úteis para as organizações responsáveis em definir os níveis aceitáveis para a exposição humana a FA. ABSTRACT: Since 2004, formaldehyde (FA) has been classified by the International Agency for Cancer Research as a carcinogen. The FA ranks 25th in the overall United States chemical production, with more than 5 million tons produced each year. Due to its economic importance and varied use, many individuals are exposed to FA at their occupational settings. This study aimed to assess the exposure to FA in two occupational settings – FA production factory and pathology anatomy (PA) laboratories – and relate it to possible health effects by comparing frequency of micronuclei (MN) in peripheral blood lymphocytes and exfoliated cells from the oral mucosa of workers exposed to FA with individuals not exposed to this agent (controls). This study was performed in 80 workers occupationally exposed to FA: 30 workers of the FA factory and 50 workers in 10 PA laboratories. The control group comprised 85 subjects without exposure. We have applied two different methodologies for environmental monitoring of FA. The results were compared with the reference to the exposure weighted average (TLV‑TWA = 0.75 ppm) and ceiling concentration (VLE‑MC = 0.3 ppm). All laboratories had results higher than the reference value to CM (1.41 ppm). None of the results obtained for the TWA exposure (0.16 ppm) were higher than the reference value. Macroscopic examination obtained the highest values of CM in 90% of laboratories. MN values were higher in individuals exposed to FA as compared to controls. As for MN in lymphocytes, the average was 3.96 in exposed compared with 0.81 in the unexposed. The MN in exfoliated cells of the buccal mucosa had an average of 0.96 in exposed, compared with 0.16 in controls. The results of this biomonitoring can be particularly useful to organizations responsible for defining acceptable levels for human exposure to FA.

Nematic wetting and filling of crenellated surfaces

We investigate nematic wetting and filling transitions of crenellated surfaces (rectangular gratings) by numerical minimization of the Landau-de Gennes free energy as a function of the anchoring strength, for a wide range of the surface geometrical parameters: depth, width, and separation of the crenels. We have found a rich phase behavior that depends in detail on the combination of the surface parameters. By comparison to simple fluids, which undergo a continuous filling or unbending transition, where the surface changes from a dry to a filled state, followed by a wetting or unbinding transition, where the thickness of the adsorbed fluid becomes macroscopic and the interface unbinds from the surface, nematics at crenellated surfaces reveal an intriguingly rich behavior: in shallow crenels only wetting is observed, while in deep crenels, only filling transitions occur; for intermediate surface geometrical parameters, a new class of filled states is found, characterized by bent isotropic-nematic interfaces, which persist for surfaces structured on large scales, compared to the nematic correlation length. The global phase diagram displays two wet and four filled states, all separated by first-order transitions. For crenels in the intermediate regime re-entrant filling transitions driven by the anchoring strength are observed.

Efficacy of low-level laser therapy on scar tissue

Background: Physiotherapy has a very important role in the maintenance of the integumentary system integrity. There is very few evidence in humans. Nevertheless, there are some studies about tissue regeneration using low-level laser therapy (LLLT). Aim: To analyze the effectiveness of LLLT on scar tissue. Methods: Seventeen volunteers were stratified by age of their scars, and then randomly assigned to an experimental group (EG) — n = 9 – and a placebo group (PG) – n = 8. Fifteen sessions were conducted to both the groups thrice a week. However, in the PG, the laser device was switched off. Scars’ thickness, length, width, macroscopic aspect, pain threshold, pain perception, and itching were measured. Results: After 5 weeks, there were no statistically significant differences in any variable between both the groups. However, analyzing independently each group, EG showed a significant improvement in macroscopic aspect (p = 0.003) using LLLT. Taking into account the scars’ age, LLLT showed a tendency to decrease older scars’ thickness in EG. Conclusion: The intervention with LLLT appears to have a positive effect on the macroscopic scars’ appearance, and on old scars’ thickness, in the studied sample. However, it cannot be said for sure that LLLT has influence on scar tissue.

Is it possible to remove polymeric nanoparticles from aqueous paints during the activated sludge treatment?

The market for emulsion polymers (latexes) is large and growing at the expense of other manufacturing processes that emit higher amounts of volatile organic solvents. The paint industry is not an exception and solvent-borne paints have been gradually substituted by aqueous paints. In their life-cycle, much of the aqueous paint used for architectural or decorative purposes will eventually be discharged into wastewater treatment facilities, where its polymeric nanoparticles (mainly acrylic and styrene-acrylic) can work as xenobiotics to the microbial communities present in activated sludge. It is well established that these materials are biocompatible at macroscopic scale. But is their behaviour the same at nanoscale? What happens to the polymeric nanoparticles during the activated sludge process? Do nanoparticles agregate and are discharged together with the sludge or remain in emulsion? How do microorganisms interact with these nanoparticles? Are nanoparticles degradated by them? Are they adsorbed? Are these nanoparticles toxic to the microbial community? To study the influence of these xenobiotics in the activated sludge process, an emulsion of cross-linked poly(butyl methacrylate) nanoparticles of ca. 50 nm diameter was produced and used as model compound. Activated sludge from a wastewater treatment plant was tested by the OCDE’s respiration inhibition test using several concentrations of PBMA nanoparticles. Particle aggregation was followed by Dynamic Light Scattering and microorganism surfaces were observed by Atomic Force Microscopy. Using sequential batch reactors (SBRs) and continuous reactors, both inoculated with activated sludge, the consumption of carbon, ammonia, nitrite and nitrate was monitored and compared, in the presence and absence of nanoparticles. No particles were detected in all treated waters by Dynamic Light Scattering. This can either mean that microorganisms can efficiently remove all polymer nanoparticles or that nanoparticles tend to aggregate and be naturally removed by precipitation. Nevertheless respiration inhibition tests demonstrated that microorganisms consume more oxygen in the presence of nanoparticles, which suggests a stress situation. It was also observed a slight decrease in the efficiency of nitrification in the presence of nanoparticles. AFM images showed that while the morphology of some organisms remained the same both in the presence and absence of nanoparticles, others assumed a rough surface with hilly like shapes of ca. 50 nm when exposed to nanoparticles. Nanoparticles are thus likely to be either incorporated or adsorbed at the surface of some organisms, increasing the overall respiration rate and decreasing nitrification efficiency. Thus, despite its biocompatibility at macroscopic scale, PBMA is likely to be no longer innocuous at nanoscale.

Education for health: alcohol and young aged school teenagers

Introduction: Alcohol consumption starts at an early age in Portuguese people. Health problems and risk behavior associated with excessive consumption can be prevented or highly reduced through effective school programs. Health professionals, such as biomedical scientists, (BSc), are important in promoting healthy lifestyles through the transmission of knowledge. Objective: Explore the role of the BSc in promoting health via intervention and clarification actions, (ICA), with 9th grade students from Agrupamento de Escolas da Portela e Moscavide (AEPM) and Visconde Juromenha (AEVJ); Verify the relationship between participating in the ICA and the level of knowledge acquired from it. Methods: Behaviors and beliefs concerning alcohol consumption and knowledge about the repercussions of it in the human body, mainly regarding the liver, were assessed by questionnaire. The questionnaire was completed before and after the ICA, by the control group (CG) and the study group (SG), respectively. The answers concerning knowledge were given points, later converted to a score from 0 to 100%. Data was analyzed applying descriptive statistics and the t-student test using SPSS 20.0. Results: After statistical analysis, it was found an average score of 48.8% for SG and 46.2% for CG. The difference between groups was statistically significant only in AEPM where ICA included a practical methodology (microscopic and macroscopic observation of pork livers), contrary to AEVJ. Conclusions: BSc intervention through ICA’s improves teenagers’ knowledge. Theoretical knowledge associated with practical approaches improves the retention of information and the development of a conscious behavior about the consumption of alcohol.

Design of New Materials for Passive Vibration Control

The objective of this contribution is to extend the models of cellular/composite material design to nonlinear material behaviour and apply them for design of materials for passive vibration control. As a first step a computational tool allowing determination of optimised one-dimensional isolator behaviour was developed. This model can serve as a representation for idealised macroscopic behaviour. Optimal isolator behaviour to a given set of loads is obtained by generic probabilistic metaalgorithm, simulated annealing. Cost functional involves minimization of maximum response amplitude in a set of predefined time intervals and maximization of total energy absorbed in the first loop. Dependence of the global optimum on several combinations of leading parameters of the simulated annealing procedure, like neighbourhood definition and annealing schedule, is also studied and analyzed. Obtained results facilitate the design of elastomeric cellular materials with improved behaviour in terms of dynamic stiffness for passive vibration control.