A magnetic, luminescent and mesoporous core-shell structured composite material as drug carrier

In this paper, hydrothermal synthesized Fe3O4 microspheres have been encapsulated with nonporous silica and a further layer of ordered mesoporous silica through a simple sol-gel process. The surface of the outer silica shell was further functionalized by the deposition of YVO4:Eu3+ phosphors, realizing a sandwich structured material with mesoporous, magnetic and luminescent properties. The multifunctional system was used as drug carrier to investigate the storage and release properties using ibuprofen (IBU) as model drug by the surface modification. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), N-2 adsorption/desorption, photoluminescence (PL) spectra, and superconducting quantum interference device (SQUID) were used to characterized the samples.

The study of novel Fe3O4@gamma-Fe2O3 core/shell nanomaterials with improved properties

The surface structure of the iron oxide nanoparticles obtained by the co-precipitation method has been investigated, and a thin layer of alpha-FeOOH absorbed on surface of the nanoparticle is confirmed by analyses of Fourier transform infrared (FTIR), X-ray photoelectron spectra (XPS) and surface photovoltage spectroscopy (SPS). After annealed at 400 degrees C, the alpha-FeOOH can be converted to gamma-Fe2O3. The simple-annealed procedure resulted in the formation of Fe3O4@gamma-Fe2O3 core/shell structure with improved stability and a higher magnetic saturation value, and also the simple method can be used to obtain core/shell structure in other similar system.

Bifunctional nanostructure of magnetic core luminescent shell and its application as solid-state electrochemiluminescence sensor material

Bifunctional nanoarchitecture has been developed by combining the magnetic iron oxide and the luminescent Ru(bpy)(3)(2+) encapsulated in silica. First, the iron oxide nanoparticles were synthesized and coated with silica, which was used to isolate the magnetic nanoparticles from the outer-shell encapsulated Ru(bpy)(3)(2+) to prevent luminescence quenching. Then onto this core an outer shell of silica containing encapsulated Ru(bpy)(3)(2+) was grown through the Stober method. Highly luminescent Ru(bpy)(3)(2+) serves as a luminescent marker, while magnetic Fe3O4 nanoparticles allow external manipulation by a magnetic field. Since Ru(bpy)(3)(2+) is a typical electrochemiluminescence (ECL) reagent and it could still maintain such property when encapsulated in the bifunctional nanoparticle, we explored the feasibility of applying the as-prepared nanostructure to fabricating an ECL sensor; such method is simple and effective. We applied the prepared ECL sensor not only to the typical Ru(bpy)(3)(2+) co-reactant tripropylamine (TPA), but also to the practically important polyamines. Consequently, the ECL sensor shows a wide linear range, high sensitivity, and good stability.

Métodos químicos de modificação superficial de nanomateriais

O objectivo geral desta tese foi investigar diversas estratégias de síntese de nanocompósitos híbridos de matriz polimérica, contendo nanopartículas inorgânicas com funcionalidades diversas. O interesse nestes nanocompósitos multifuncionais consiste no enorme potencial que apresentam para novas aplicações tecnológicas, tais como em optoelectrónica ou em medicina. No capítulo introdutório, apresenta-se uma revisão das propriedades de nanopartículas inorgânicas e nanoestruturas obtidas a partir destas, métodos de preparação e de modificação química superficial, incluindo a formação de nanocompósitos poliméricos, bem como a aplicação destas nanoestruturas em medicina e biologia. O estudo das propriedades de nanopartículas de ouro é um importante tema em Nanociência e Nanotecnologia. As propriedades singulares destas NPs apresentam uma estreita relação com o tamanho, morfologia, arranjo espacial e propriedades dieléctricas do meio circundante. No capítulo 2, é reportada a preparação de nanocompósitos utilizando miniemulsões de poli-estireno (PS) e poli-acrilato de butilo (PBA) contendo nanopartículas de ouro revestidas com moléculas orgânicas. As propriedades ópticas destas estruturas híbridas são dominadas por efeitos plasmónicos e dependem de uma forma crítica na morfologia final dos nanocompósitos. Em particular, demonstra-se aqui a possibilidade de ajustar a resposta óptica, na região do visível do espectro, através do arranjo das nanopartículas na matriz polimérica, e consequentemente o acoplamento plasmónico, utilizando nanopartículas resultantes da mesma síntese. Na generalidade, é reportada aqui uma estratégia alternativa para modificar a resposta óptica de nanocompósitos, através do controlo da morfologia do compósito final face à estratégia mais comum que envolve o controlo das características morfológicas das partículas metálicas utilizadas como materiais de partida. No Capítulo 3 apresentam-se os resultados da preparação de vários compósitos poliméricos com propriedades magnéticas de interesse prático. Em particular discute-se a síntese e propriedades magnéticas de nanopartículas de ligas metálicas de cobalto-platina (CoPt3) e ferro-platina (FePt3), assim como de óxidos de ferro (magnetite Fe3O4 e maguemite g-Fe2O3) e respectivos nanocompósitos poliméricos. A estratégia aqui descrita constitui uma via interessante de desenvolver materiais nanocompósitos com potencial aplicação em ensaios de análise de entidades biológicas in vitro, que pode ser estendido a outros materiais magnéticos. Como prova de conceito, demonstrase a bioconjugação de nanocompósitos de CoPt3/PtBA com anticorpos IgG de bovino. No capítulo 4 é descrita a preparação e propriedades ópticas de pontos quânticos (“quantum dots”, QDs) de CdSe/ZnS assim como dos seus materiais nanocompósitos poliméricos, CdSe/ZnS-PBA. Como resultado das suas propriedades ópticas singulares, os QDs têm sido extensivamente investigados como materiais inorgânicos para aplicações em dispositivos ópticos. A incorporação de QDs em matrizes poliméricas é de particular interesse, nomeadamente devido ao comportamento óptico do nanocompósito final parecer estar dependente do tipo de polímero utilizado. As propriedades ópticas dos nanocompósitos foram estudadas sistematicamente por medidas de fotoluminescência. Os nanocompósitos apresentam propriedades interessantes para potenciais aplicações biológicas em diagnóstico in vitro, funcionando como sondas biológicas luminescentes.

Synthesis of Bio-Compatible SPION–based Aqueous Ferrofluids and Evaluation of RadioFrequency Power Loss for Magnetic Hyperthermia

Bio-compatible magnetic fluids having high saturation magnetization find immense applications in various biomedical fields. Aqueous ferrofluids of superparamagnetic iron oxide nanoparticles with narrow size distribution, high shelf life and good stability is realized by controlled chemical co-precipitation process. The crystal structure is verified by X-ray diffraction technique. Particle sizes are evaluated by employing Transmission electron microscopy. Room temperature and low-temperature magnetic measurements were carried out with Superconducting Quantum Interference Device. The fluid exhibits good magnetic response even at very high dilution (6.28 mg/cc). This is an advantage for biomedical applications, since only a small amount of iron is to be metabolised by body organs. Magnetic field induced transmission measurements carried out at photon energy of diode laser (670 nm) exhibited excellent linear dichroism. Based on the structural and magnetic measurements, the power loss for the magnetic nanoparticles under study is evaluated over a range of radiofrequencies.

Structural Investigation of MFe(2)O(4) (M = Fe, Co) Magnetic Fluids

Ferrites of the type M(II)Fe(2)O(4) (M = Fe and Co) have been prepared by the traditional coprecipitation method. These ferrites were modified by the adsorption of fatty acids derived from soybean and castor oil and were then dispersed in cyclohexane, providing very stable magnetic fluids, readily usable in nonpolar media. The structural properties of the ferrites and modified ferrites as well as the magnetic fluids were characterized by XRD (X-ray powder diffraction), TEM (transmission electron microscopy), DRIFTS (diffusion reflectance infrared Fourier transform spectroscopy), FTMR (Fourier transform near-infrared), UV-vis, normal Raman spectroscopy, and surface-enhanced Raman scattering (SERS). XRD and TEM analysis have shown that the magnetic nanoparticles (nonmodified and modified) present diameters in the range of 10-15 nm. DRIFTS measurements have shown that the carboxylate groups of soybean and castor oil fatty acids adsorb on the ferrite surface, forming three different structures: a bridging bidentate, a bridging monodentate, and a bidentate chelate structure. The FTIR and Raman spectra of nonmodified Fe(3)O(4) and CoFe(2)O(4) nanoparticles have shown that the number of observed phonons is not compatible with the expected O(h)(7) symmetry, since IR-only active phonons were observed. in the Raman spectra and vice versa. SERS measurements of a CoFe(2)O(4) thin film on a SERS-active gold electrode at different applied potentials made possible the assignment of the signals near 550 and 630 cm(-1) to Co-O motions and the signals near 470 and 680 cm(-1) to Fe-O motions.

Síntese de nanopartículas de magnetita via decomposição térmica em meio não-aquoso

This work aims at obtaining nanoparticles of iron oxide, the magnetite one (Fe3O4), via synthesis by thermal decomposition through polyol. Thus, two routes were evaluated: a simple decomposition route assisted by reflux and a hydrothermal route both without synthetic air atmosphere using a synthesis temperature of 260ºC. In this work observed the influence of the observe of surfactants which are generally applied in the synthesis of iron oxide nanoparticles decreasing cluster areas. Further, was observed pure magnetite phase without secondary phases generally found in the iron oxide synthesis, a better control of crystallite size, morphology, crystal structure and magnetic behavior. Finally, the introduction of hydroxyl groups on the nanoparticles surface was analyzed besides its employment in the polymer production with OH radicals. The obtained materials were characterized by XRD, DLS, VSM, TEM, TG and DSC analyses. The results for the magnetite obtainment with a particle size greater than 5 nm and smaller than 11 nm, well defined morphology and good magnetic properties with superparamagnetic behavior. The reflux synthesis was more efficient in the deposition of the hydroxyl groups on the nanoparticles surface

PEGylation of SPIONs by polycondensation reactions: A new strategy to improve colloidal stability in biological media

In this study, we report on a new route of PEGylation of superparamagnetic iron oxide nanoparticles (SPIONs) by polycondensation reaction with carboxylate groups. Structural and magnetic characterizations were performed by X-ray diffractometry (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and vibrating sample magnetometry (VSM). The XRD confirmed the spinel structure with a crystallite average diameter in the range of 3.5-4.1 nm in good agreement with the average diameter obtained by TEM (4.60-4.97 nm). The TGA data indicate the presence of PEG attached onto the SPIONs' surface. The SPIONs were superparamagnetic at room temperature with saturation magnetization (M S) from 36.7 to 54.1 emu/g. The colloidal stability of citrate- and PEG-coated SPIONs was evaluated by means of dynamic light scattering measurements as a function of pH, ionic strength, and nature of dispersion media (phosphate buffer and cell culture media). Our findings demonstrated that the PEG polymer chain length plays a key role in the coagulation behavior of the Mag-PEG suspensions. The excellent colloidal stability under the extreme conditions we evaluated, such as high ionic strength, pH near the isoelectric point, and cell culture media, revealed that suspensions comprising PEG-coated SPION, with PEG of molecular weight 600 and above, present steric stabilization attributed to the polymer chains attached onto the surface of SPIONs. © 2013 Springer Science+Business Media Dordrecht.

Síntese e funcionalização de superfícies de óxido de ferro superparamagnéticos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Modificação da superfície de óxidos de ferro por dextrana derivatizada para aplicações em liberação de fármaco

Pós-graduação em Química - IQ

Easily handling penicillin G acylase magnetic cross-linked enzymes aggregates: Catalytic and morphological studies

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modificação superficial de nanopartículas de óxido de ferro por poli(ácido aspártico) reticulado

Pós-graduação em Química - IQ

Biocellulose-based flexible magnetic paper

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modificação da superfície de óxidos de ferro por dextrana derivatizada para aplicações em liberação de fármaco

Pós-graduação em Química - IQ