Epitaxial strain and electric boundary condition effects on the structural and ferroelectric properties of BiFeO3 films

The influence of both compressive and tensile epitaxial strain along with the electrical boundary conditions on the ferroelastic and ferroelectric domain patterns of bismuth ferrite films was studied. BiFeO3 films were grown on SrTiO3(001), DyScO3(110), GdScO3(110), and SmScO3(110) substrates to investigate the effect of room temperature in-plane strain ranging from -1.4% to +0.75%. Piezoresponse force microscopy, transmission electron microscopy, x-ray diffraction measurements, and ferroelectric polarization measurements were performed to study the properties of the films. We show that BiFeO3 films with and without SrRuO3 bottom electrode have different growth mechanisms and that in both cases reduction of the domain variants is possible. Without SrRuO3, stripe domains with reduced variants are formed on all rare earth scandate substrates because of their monoclinic symmetry. In addition, tensile strained films exhibit a rotation of the unit cell with increasing film thickness. On the other side, the presence of SrRuO3 promotes step flow growth of BiFeO3. In case of vicinal SrTiO3 and DyScO3 substrates with high quality SrRuO3 bottom electrode and a low miscut angle of approximate to 0.15 degrees we observed suppression of the formation of certain domain variants. The quite large in-plane misfit of SrRuO3 with GdScO3 and SmScO3 prevents the growth of high quality SrRuO3 films and subsequent domain variants reduction in BiFeO3 on these substrates, when SrRuO3 is used as a bottom electrode.

Optical transmission of periodic annular apertures in metal film on high-refractive index substrate: The role of the nanopillar shape

The influence of annular aperture parameters on the optical transmission through arrays of coaxial apertures in a metal film on high refractive index substrates has been investigated experimentally and numerically. It is shown that the transmission resonances are related to plasmonic crystal effects rather than frequency cutoff behavior associated with annular apertures. The role of deviations from ideal aperture shape occurring during the fabrication process has also been studied. Annular aperture arrays are often considered in many applications for achieving high optical transmission through metal films and understanding of nanofabrication tolerances are important. (C) 2010 American Institute of Physics.

Substrate Clamping Effects on Irreversible Domain Wall Dynamics in Lead Zirconate Titanate Thin Films

The role of long-range strain interactions on domain wall dynamics is explored through macroscopic and local measurements of nonlinear behavior in mechanically clamped and released polycrystalline lead zirconate-titanate (PZT) films. Released films show a dramatic change in the global dielectric nonlinearity and its frequency dependence as a function of mechanical clamping. Furthermore, we observe a transition from strong clustering of the nonlinear response for the clamped case to almost uniform nonlinearity for the released film. This behavior is ascribed to increased mobility of domain walls. These results suggest the dominant role of collective strain interactions mediated by the local and global mechanical boundary conditions on the domain wall dynamics. The work presented in this Letter demonstrates that measurements on clamped films may considerably underestimate the piezoelectric coefficients and coupling constants of released structures used in microelectromechanical systems, energy harvesting systems, and microrobots.

Nonlinear phenomena in multiferroic nanocapacitors:joule heating and electromechanical effects

We demonstrate an approach for probing nonlinear electromechanical responses in BiFeO(3) thin film nanocapacitors using half-harmonic band excitation piezoresponse force microscopy (PFM). Nonlinear PFM images of nanocapacitor arrays show clearly visible clusters of capacitors associated with variations of local leakage current through the BiFeO(3) film. Strain spectroscopy measurements and finite element modeling point to significance of the Joule heating and show that the thermal effects caused by the Joule heating can provide nontrivial contributions to the nonlinear electromechanical responses in ferroic nanostructures. This approach can be further extended to unambiguous mapping of electrostatic signal contributions to PFM and related techniques.

Characterization of optical properties of PtSi at 3.392 mu m from 300 K to 85 K and relation of morphological effects

PtSi/Si Schottky junctions, fabricated using a conventional technique of Pt deposition with a subsequent thermal anneal, are examined using X-ray diffraction, atomic force microscopy and a novel prism/gap/sample optical coupling system. With the aid of X-ray diffraction and atomic farce microscopy it is shown that a post-anneal etch in aqua regia is essential for the removal of an unreacted, rough surface layer of Pt, to leave a much smoother PtSi film. The prism/gap/sample or Otto coupling rig is mounted in a small UHV chamber and has facilities for remote variation of the gap (by virtue of a piezoactuator system) and variation of the temperature in the range of similar to 300 K - 85 K. The system is used to excite surface plasmon polaritons on the outer surface of the PtSi and thus produce sensitive optical characterisation as a function of temperature. This is performed in order to yield an understanding of the temperature dependence of phonon and interface scattering of carriers in the PtSi.

Breaking the Intimate Screen: Pre-Recording, Special Effects and the Aesthetics of Early British Television

The technological constraints of early British television encouraged drama productions which emphasised the immediate, the enclosed and the close-up, an approach which Jason Jacobs described in the title of his seminal study as 'the intimate screen'. While Jacobs' book showed that this conception of early British television drama was only part of the reality, he did not focus on the role that special effects played in expanding the scope of the early television screen. This article will focus upon this role, showing that special effects were not only of use in expanding the temporal and spatial scope of television, but were also considered to be of interest to the audience as a way of exploring the new medium, receiving coverage in the popular press. These effects included pre-recorded film inserts, pre-recorded narration, multiple sets, model work and animation, combined with the live studio performances. Drawing upon archival research into television production files and scripts as well as audience responses and periodical coverage of television at the time of broadcast, this article will focus on telefantasy. This genre offered particular opportunities for utilising effects in ways that seemed appropriate for the experimentation with the form of television and for the drama narratives. This period also saw a variety of shifts within television as the BBC sought to determine a specific identity and understand the possibilities for the new medium.
This research also incorporates the BBC's own research and internal dialogue concerning audiences and how their tastes should best be met, at a time when the television audience was not only growing in terms of number but was also expanding geographically and socially beyond the moneyed Londoners who could afford the first television sets and were within range of the Alexandra Palace transmissions. The primary case study for this article will be the 1949 production of H.G.Wells’ The Time Machine, which incorporated pre-recorded audio and film inserts, which expanded the narrative out of the live studio performance both temporally and spatially, with the effects work receiving coverage in the popular magazine Illustrated. Other productions considered will be the 1938 and 1948 productions of RUR, the 1948 production of Blithe Spirit, and the 1950 adaptation of The Strange Case of Dr Jekyll and Mr Hyde. Despite the focus on telefantasy, this article will also include examples from other genres, both dramatic and factual, showing how the BBC's response to the changing television audience was to restrict drama to a more 'realistic' aesthetic and to move experimentation with televisual form to non-drama productions such as variety performances.

Nanotech thin film photovoltaics

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Electrónica e Telecomunicações

Effects of sulphurization time on Cu2ZnSnS4 absorbers and thin films solar cells obtained from metallic precursors

We report the results of a study of the sulphurization time effects on Cu2ZnSnS4 absorbers and thin film solar cells prepared from dc-sputtered tackedmetallic precursors. Three different time intervals, 10 min, 30min and 60 min, at maximum sulphurization temperature were considered. The effects of this parameter' change were studied both on the absorber layer properties and on the final solar cell performance. The composition, structure, morphology and thicknesses of the CZTS layers were analyzed. The electrical characterization of the absorber layer was carried out by measuring the transversal electrical resistance of the samples as a function of temperature. This study shows an increase of the conductivity activation energy from 10 meV to 54meV for increasing sulphurization time from 10min to 60min. The solar cells were built with the following structure: SLG/Mo/CZTS/CdS/i-ZnO/ZnO:Al/Ni:Al grid. Several ac response equivalent circuit models were tested to fit impedance measurements. The best results were used to extract the device series and shunt resistances and capacitances. Absorber layer's electronic properties were also determined using the Mott–Schottky method. The results show a decrease of the average acceptor doping density and built-in voltage, from 2.0 1017 cm−3 to 6.5 1015 cm−3 and from 0.71 V to 0.51 V, respectively, with increasing sulphurization time. These results also show an increase of the depletion region width from approximately 90 nm–250 nm.

The Midnight express phenomenon : a historical materialist approach to the reception of the film Midnight express /

This thesis examines the Midnight Express phenomenon focusing on the film's reception by audiences in Europe, North America, and Turkey between 1978-2003. Using and enhancing the "historical materialist approach" to film reception developed by Janet Staiger, the thesis considers the historical determinants of the film's nationally and culturally differential readings in different periods and of the transformations in those readings. The thesis argues that while Midnight Express was most likely read in the late 1970s as an attempt to reaffirm American social identity by projecting Turks as an instance of the negative Other, there has been an important shift in the reception of the film in the West during the 1990s due to the changes in the discursive contexts in which the film has been circulating. One does not observe any specific reference to Turkish prisons as a part of the issue of human rights violations in Turkey in the initial reception of the film by European and American critics, whereas these issues appear to be important constituents of a particular reception of the film in the West in the present. The thesis explains this shift by pointing to the constitution of a particular discourse on human rights violations in Turkey after 1980, and especially throughout the 1990s, which has become a part of the discursive repertoires of the Western audience. Therefore, the thesis argues that today, Midnight Express functions as a more legitimate political statement about Turkey in the eyes of some Western audiences than it had been in the 1970s. On the other hand, parallel to the increasing desire of Turkey to connect itself to the West, particularly to become a member of the European Union, one observes an immense increase in the belief in and defense against the negative effects of Midnight Express on Turkey's international representation since the 1990s. The historical and current discourses that audiences, both in Turkey and abroad, bring into play suggest that these audiences engage with Midnight Express by assuming or denying not only the subject positions constructed by the film text but also certain history-specific extra-filmic subject positions produced by other social and discursive formations.

Cognitive consequences of expressive suppression : effects of sex and emotional valence

The present research was designed to examine whether sex and/or emotional valence pl aya role in the cognitive consequences (e.g., memory) of expressive suppression. Seventy-two (36 male and 36 female) undergraduates were randomly assigned to either a control or expressive suppression condition, and were asked to watch silent film clips intended to elicit amusement and disgust. While watching each film, participants listened to sixteen nonemotional words. After each film, participants were asked to answer questions about wha t they had seen in the film (visual memory), to recall as many words as they could (auditory recall memory), and to select from a list any words that they had heard during the previous film clip (auditory recognition memory). With regard to the effects of expressive suppression on visual memory, results indicated a 3-way interaction between condition, sex and film emotion: Men performed more poorly than women on the visual memory test after watching both the amusing and disgusting films in the control condition, and when watching the amusing film in the expressive suppression condition. However, men in the expressive suppression condition performed better than women after watching the disgusting film. In terms of the effects of expressive suppression on auditory memory (recognition and recall), a condition x film emotion interaction indicated that there was no difference in auditory memory for the expressive suppression and control conditions when watching the amusing film, but that the expressive suppression group showed poorer auditory memory than the control group for words presented during the disgusting film. Moreover, a ma in effect of sex on auditory memory suggested that men recalled and recognized more words than women across conditions. Taken together, these findings suggest that both sex and the emotional valence of films may influence the effects of expressive suppression on memory. Results will be discussed in the context of previous literature concerning the effects of expressive suppression on cognition.

La bande-annonce, un film amplifié

Notre projet porte sur la relation entre la bande-annonce et le film qu’elle présente. Plus précisément, nous nous intéressons à la manière dont le remontage effectué par la bande-annonce amplifie le film. En premier lieu, nous avons effectué une analyse intertextuelle et esthétique de cinq bandes-annonces contemporaines en cernant le concept spécifique de chacun des exemples et en isolant ce que nous avons appelé des effets d’emphase, c’est-à-dire la mise en valeur de certaines qualités du film par l’entremise du montage du film-annonce. Nous avons ensuite exploré conceptuellement la logique transformante de la bande-annonce en considérant des pistes complémentaires : le montage attractif, la structure ouverte et l’évocation d’une mémoire virtuelle.

Spray Pyrolysed Zinc Oxide Thin Films : Effects of Doping and Ion Beam Irradiation

In recent years scientists have made rapid and significant advances in the field of semiconductor physics. One of the most important fields of current interest in materials science is the fundamental aspects and applications of conducting transparent oxide thin films (TCO). The characteristic properties of such coatings are low electrical resistivity and high transparency in the visible region. The first semitransparent and electrically conducting CdO film was reported as early as in 1907 [1]. Though early work on these films was performed out of purely scientific interest, substantial technological advances in such films were made after 1940. The technological interest in the study of transparent semiconducting films was generated mainly due to the potential applications of these materials both in industry and research. Such films demonstrated their utility as transparent electrical heaters for windscreens in the aircraft industry. However, during the last decade, these conducting transparent films have been widely used in a variety of other applications such as gas sensors [2], solar cells [3], heat reflectors [4], light emitting devices [5] and laser damage resistant coatings in high power laser technology [6]. Just a few materials dominate the current TCO industry and the two dominant markets for TCO’s are in architectural applications and flat panel displays. The architectural use of TCO is for energy efficient windows. Fluorine doped tin oxide (FTO), deposited using a pyrolysis process is the TCO usually finds maximum application. SnO2 also finds application ad coatings for windows, which are efficient in preventing radiative heat loss, due to low emissivity (0.16). Pyrolitic tin oxide is used in PV modules, touch screens and plasma displays. However indium tin oxide (ITO) is mostly used in the majority of flat panel display (FPD) applications. In FPDs, the basic function of ITO is as transparent electrodes. The volume of FPD’s produced, and hence the volume of ITO coatings produced, continues to grow rapidly. But the current increase in the cost of indium and the scarcity of this material created the difficulty in obtaining low cost TCOs. Hence search for alternative TCO materials has been a topic of active research for the last few decades. This resulted in the development of binary materials like ZnO, SnO2, CdO and ternary materials like II Zn2SnO4, CdSb2O6:Y, ZnSO3, GaInO3 etc. The use of multicomponent oxide materials makes it possible to have TCO films suitable for specialized applications because by altering their chemical compositions, one can control the electrical, optical, chemical and physical properties. But the advantages of using binary materials are the easiness to control the chemical compositions and depositions conditions. Recently, there were reports claiming the deposition of CdO:In films with a resistivity of the order of 10-5 ohm cm for flat panel displays and solar cells. However they find limited use because of Cd-Toxicity. In this regard, ZnO films developed in 1980s, are very useful as these use Zn, an abundant, inexpensive and nontoxic material. Resistivity of this material is still not very low, but can be reduced through doping with group-III elements like In, Al or Ga or with F [6]. Hence there is a great interest in ZnO as an alternative of ITO. In the present study, we prepared and characterized transparent and conducting ZnO thin films, using a cost effective technique viz Chemical Spray Pyrolysis (CSP). This technique is also suitable for large area film deposition. It involves spraying a solution, (usually aqueous) containing soluble salts of the constituents of the desired compound, onto a heated substrate.

Optical and electrical properties of amorphous zinc tin oxide thin films examined for thin film transistor application

Structural, electronic, and optical properties of amorphous and transparent zinc tin oxide films deposited on glass substrates by pulsed laser deposition (PLD) were examined for two chemical compositions of Zn:Sn=1:1 and 2:1 as a function of oxygen partial pressure PO2 used for the film deposition and annealing temperature. Different from a previous report on sputter-deposited films Chiang et al., Appl. Phys. Lett. 86, 013503 2005 , the PLD-deposited films crystallized at a lower temperature 450 °C to give crystalline ZnO and SnO2 phases. The optical band gaps Tauc gaps were 2.80−2.85 eV and almost independent of oxygen PO2 , which are smaller than those of the corresponding crystals 3.35−3.89 eV . Films deposited at low PO2 showed significant subgap absorptions, which were reduced by postthermal annealing. Hall mobility showed steep increases when carrier concentration exceeded threshold values and the threshold value depended on the film chemical composition. The films deposited at low PO2 2 Pa had low carrier concentrations. It is thought that the low PO2 produced high-density oxygen deficiencies and generated electrons, but these electrons were trapped in localized states, which would be observed as the subgap absorptions. Similar effects were observed for 600 °C crystallized films and their resistivities were increased by formation of subgap states due to the reducing high-temperature condition. High carrier concentrations and large mobilities were obtained in an intermediate PO2 region for the as-deposited films.

Effects and Modifications in In/Se and In/Sb Systems by Swift Heavy Ion Irradiation

Department of Physics, Cochin University of Science and Technology

Effects of Platinum on NiPtSiGe/n-SiGe and NiPtSi/n-Si Schottky Contacts

Solid phase reaction of NiPt/Si and NiPt/SiGe is one of the key issues for silicide (germanosilicide) technology. Especially, the NiPtSiGe, in which four elements are involved, is a very complex system. As a result, a detailed study is necessary for the interfacial reaction between NiPt alloy film and SiGe substrate. Besides using traditional material characterization techniques, characterization of Schottky diode is a good measure to detect the interface imperfections or defects, which are not easy to be found on large area blanket samples. The I-V characteristics of 10nm Ni(Pt=0, 5, 10 at.%) germanosilicides/n-Si₀/₇Ge₀.₃ and silicides/n-Si contact annealed at 400 and 500°C were studied. For Schottky contact on n-Si, with the addition of Pt in the Ni(Pt) alloy, the Schottky barrier height (SBH) increases greatly. With the inclusion of a 10% Pt, SBH increases ~0.13 eV. However, for the Schottky contacts on SiGe, with the addition of 10% Pt, the increase of SBH is only ~0.04eV. This is explained by pinning of the Fermi level. The forward I-V characteristics of 10nm Ni(Pt=0, 5, 10 at.%)SiGe/SiGe contacts annealed at 400°C were investigated in the temperature range from 93 to 300K. At higher temperature (>253K) and larger bias at low temperature (<253K), the I-V curves can be well explained by a thermionic emission model. At lower temperature, excess currents at lower forward bias region occur, which can be explained by recombination/generation or patches due to inhomogenity of SBH with pinch-off model or a combination of the above mechanisms.