Studies on lipid production of microalgae under mixotrophic growth, utilizing glycerol as a carbon source, combined with nitrogen starvation

Rampant increases in oil prices and detrimental effects of fossil fuels on the environment have been the main impetus for the development of environmentally friendly and sustainable energy sources. Amongst the many possibilities, microalgae have been proposed as a new alternative energy source to fossil fuels, as their growth is both sustainable and ecologically safe. By definition, microalgae are unicellular photosynthetic microorganisms containing chlorophyll a. These organisms are capable of producing large quantities of oils, surpassing that of traditional oil-seed crops, which can be transformed, through chemical processes, into biofuels such as biodiesel or bio-gasoline. Thus, recent research has gone into discovering high lipid producing algal strains, optimising growth media for increased lipid production and developing metabolic engineering to make microalgae a source of biofuel that is competitive to more traditional sources of biofuel and even to fossil fuel. In this context, the research reported here focused on using a mixotrophic growth mode as a way to increase lipid production for certain strains of microalgae. In addition, nitrogen starvation combined with mixotrophy was studied to analyse its effects on lipid production. Mixotrophy is the parallel usage of two trophic modes, in our case photoautotrophy and heterotrophy. Consequently, 12 algal strains were screened for mixotrophic growth, using glycerol as a carbon source. Glycerol is a waste product of the current biodiesel industry; it is a cheap and abundant carbon source present in many metabolic pathways. From this initial screening, several strains were chosen for subsequent experiments involving nitrogen starvation. Nitrogen starvation has been shown to induce lipid accumulation. The results obtained show that a mixotrophic growth mode, using glycerol as a carbon source, enhances lipid production for certain strains. Moreover, lipid enhancement was shown for nitrogen starvation combined with mixotrophic growth mode. This was dependant on time spent under nitrogen starvation and on initial concentrations of the nitrogen source.

Zeolite Encapsulated Complexes Of Fe,Co,Ni,Cu And Pd:Synthesis , Characterization And Catalysis-2003

This thesis deals with the synthesis, characterization and catalysis activity studies of some zeolite encapsulated complexes. Encapsulation inside the zeolite cages makes the catalysts more stable. Further, the framework prevents the complexes from dimerising. Catalysis by metal complexes encapsulated in the cavities of zeolites and other molecular sieves has many features of homogeneous, heterogenous and enzymatic catalysis. Serious attempts has been made to gain product selectivity in catalysis .The catalytic activity shown by the encapsulated complexes can be correlated to the structure of the active site inside the zeolite pore. It deals with the studies on the partial oxidation of benzyl alcohol to benzaldehyde. The oxidatio was carried out using hydrogen peroxide as oxidant in presence of PdYDMG and CuYSPP as catalysts. The product (benzaldehyde) was detected using TLC and confirmed using GC.The catalytic activity of the complexes was tested for oxidation under various conditions. The operating conditions like the amount of the catalyst, reaction time, oxidant to substrate ratio, reaction temprature, and solvents have been optimized. No further oxidation products were obtained on continuing the reaction for four hours beyond the optimum time. Maximum conversion was obtained at room temperature and the percentage conversion decreased with increase in temperature. Activity was found to be dependent on the solvent used. With increasing awareness about the dangers of environmental degradation, research in chemistry is getting increasing geared to the development of “green chemistry,” by designing environmentally friendly products and processes that bring down the generation and use of hazardous substances.

Production and Characterization of Endocylanase from Bacillus Pumilus Using Solidstate Fermentation and its Application in 'Paper Pulp Processing

In the present studies it is clear that Bacillus pumilus xylanase is having the characteristic suited for an industrial enzyme (xylanases that are active and stable at elevated temperatures and alkaline pH are needed). SSF production of xylanases and its application appears to be an innovative technology where the fermented substrate is the enzyme source that is used directly in the bleaching process without a prior downstream processing. The direct use of SSF enzymes in bleaching is a relatively new biobleaching approach. This can certainly benefit the bleaching process to lower the xylanase production costs and improve the economics and viability of the biobleaching technology. The application of enzymes to the bleaching process has been considered as an environmentally friendly approach that can reduce the negative impact on the environment exerted by the use of chlorine-based bleaching agents. It has been demonstrated that pretreatment of kraft pulp with xylanase prior to bleaching (biobleaching) can facilitate subsequent removal of lignin by bleaching chemicals, thereby, reducing the demand for elemental chlorine or improving final paper brightness. Using this xylanase pre-treatment, has resulted in an increased of brightness (8.5 Unit) when compared to non-enzymatic treated bleached pulp prepared using identical conditions. Reduction of the consumption of active chlorine can be achieved which results in a decrease in the toxicity, colour, chloride and absorbable organic halogen (AOX) levels of bleaching effluents. The xylanase treatment improves drainage, strength properties and the fragility of pulps, and also increases the brightness of pulps. This positive result shows that enzyme pre-treatment facilitates the removal of chromophore fragments of pulp there by making the process more environment friendly

Acetalization of ketones on K-10 clay and rare earth exchanged HFAU-Y zeolites: A mild and facile procedure for the synthesis of dimethylacetals

Dimethylacetals of ketones; cyclohexanone, acetophenone, and benzophenone have been prepared by reacting ketones with methanol under mild reaction conditions. Large pore zeolites (H-Y and its rare earth metal, Ce3+, La3+, and RE3+ modified forms), and mesoporous clay (K-10 montmorillonite and its cerium exchanged counterpart) with regular pore structure, silica and silica-alumina have been used as catalysts. Clay catalysts are found to be much more active than zeolites, thanks to slightly bigger pore size. The nature of the pores of the solid acid catalysts determine acetalization efficiency of a particular catalyst. As evidenced by the reaction time studies, the catalyst decay is greater over the zeolites than over the clays. Carrying out the reaction with ketones of different molecular sizes it is shown that K-10 clays and rare earth exchanged H-Y zeolites are promising environmentally friendly catalysts for their use in the production fine chemicals.

Catalysis by Transition Metal Modified Ceria and Ceria-Zirconia Mixed Oxides Prepared via Sol-Gel Route

The aim of catalysis research is to apply the catalyst successfully in economically important reactions in an environmentally friendly way. The present work focuses on the modification of structural and surface properties of ceria and ceria-zirconia catalysts by the incorporation of transition metals. The applications of these catalysts in industrially important reactions like ethylbenzene oxidation, alkylation of aromatics are also investigated.Sol-gel method is effective for the preparation of transition metal modified ceria and ceria-zirconia mixed oxide since it produces catalyst with highly dispersed incorporated metal. Unlike that of impregnation method plugging of pores is not prominent for sol-gel derived catalyst materials. This prevents loss of surface area on metal modification as evident for BET surface area measurements.The powder X-ray diffraction analysis confirms the cubic structure of transition metal modified ceria and ceria-zirconia catalysts. The thermal stability is evident from TGA/DTA analysis. DR UV-vis spectra provide information on the coordination environment of the incorporated metal. EPR analysis ofCr, Mn and Cu modified ceria and a ceria-zirconia catalyst reveals the presence of different oxidation states of incorporated metal.Temperature programmed desorption of ammonia and thermogravimetric desorption of 2,6-dimethyl pyridine confirms the enhancement of acidity on metal incorporation. High a-methyl styrene selectivity in cumene cracking reaction implies the presence of comparatively more number of Lewis acid sites with some amount of Bronsted acid sites. The formation of cyclohexanone during cyclohexanol decomposition confirms the presence of basic sites on the catalyst surface.Mn and Cr modified catalysts show better activity towards ethylbenzene oxidation. A redox mechanism through oxometal pathway is suggested.All the catalysts were found to be active towards benzylation of toluene and a-xylene. The selectivity towards monoalkylated products remains almost 100%. The catalytic activity is correlated with the Lewis acidity of the prepared systems.The activity of the catalysts towards methylation of phenols depends on the strength acid sites as well as the redox properties of the catalysts. A strong dependence of methylation activity on the total acidity is illustrated.

Modelling and simulation of a photovoltaic fuel cell hybrid system

A stand-alone power system is an autonomous system that supplies electricity to the user load without being connected to the electric grid. This kind of decentralized system is frequently located in remote and inaccessible areas. It is essential for about one third of the world population which are living in developed or isolated regions and have no access to an electricity utility grid. The most people live in remote and rural areas, with low population density, lacking even the basic infrastructure. The utility grid extension to these locations is not a cost effective option and sometimes technically not feasible. The purpose of this thesis is the modelling and simulation of a stand-alone hybrid power system, referred to as “hydrogen Photovoltaic-Fuel Cell (PVFC) hybrid system”. It couples a photovoltaic generator (PV), an alkaline water electrolyser, a storage gas tank, a proton exchange membrane fuel cell (PEMFC), and power conditioning units (PCU) to give different system topologies. The system is intended to be an environmentally friendly solution since it tries maximising the use of a renewable energy source. Electricity is produced by a PV generator to meet the requirements of a user load. Whenever there is enough solar radiation, the user load can be powered totally by the PV electricity. During periods of low solar radiation, auxiliary electricity is required. An alkaline high pressure water electrolyser is powered by the excess energy from the PV generator to produce hydrogen and oxygen at a pressure of maximum 30bar. Gases are stored without compression for short- (hourly or daily) and long- (seasonal) term. A proton exchange membrane (PEM) fuel cell is used to keep the system’s reliability at the same level as for the conventional system while decreasing the environmental impact of the whole system. The PEM fuel cell consumes gases which are produced by an electrolyser to meet the user load demand when the PV generator energy is deficient, so that it works as an auxiliary generator. Power conditioning units are appropriate for the conversion and dispatch the energy between the components of the system. No batteries are used in this system since they represent the weakest when used in PV systems due to their need for sophisticated control and their short lifetime. The model library, ISET Alternative Power Library (ISET-APL), is designed by the Institute of Solar Energy supply Technology (ISET) and used for the simulation of the hybrid system. The physical, analytical and/or empirical equations of each component are programmed and implemented separately in this library for the simulation software program Simplorer by C++ language. The model parameters are derived from manufacturer’s performance data sheets or measurements obtained from literature. The identification and validation of the major hydrogen PVFC hybrid system component models are evaluated according to the measured data of the components, from the manufacturer’s data sheet or from actual system operation. Then, the overall system is simulated, at intervals of one hour each, by using solar radiation as the primary energy input and hydrogen as energy storage for one year operation. A comparison between different topologies, such as DC or AC coupled systems, is carried out on the basis of energy point of view at two locations with different geographical latitudes, in Kassel/Germany (Europe) and in Cairo/Egypt (North Africa). The main conclusion in this work is that the simulation method of the system study under different conditions could successfully be used to give good visualization and comparison between those topologies for the overall performance of the system. The operational performance of the system is not only depending on component efficiency but also on system design and consumption behaviour. The worst case of this system is the low efficiency of the storage subsystem made of the electrolyser, the gas storage tank, and the fuel cell as it is around 25-34% at Cairo and 29-37% at Kassel. Therefore, the research for this system should be concentrated in the subsystem components development especially the fuel cell.

‘Green Consumption’ beyond mainstream economy: A discourse analysis

In contemporary society, green consumption is a popular concept. The life styles of people and consumption behaviors are moderated in accordance to the ‘green ideology’. The process of green consumption can be observed through social behaviors such as preference of bio foods, recycling, reusing, limiting the over consumption and using environmentally friendly transport systems. However, mainstream economic analyses on green consumption argued that consumer behaviors are due to the rational choice of individuality based on utility and self-preferences. The hypothesis of this paper on consumer behavior in green consumption is configured by discourses according to the discourse analysis.

Farmers’ knowledge and perceptions of potato pests and their management in Uganda

As we initiate entomological research on potato (Solanum tuberosum L.) in Uganda, there is need to understand farmers’ knowledge of existing insect pest problems and their management practices. Such information is important for designing a suitable intervention and successful integrated pest management (IPM) strategy. A farm household survey using a structured questionnaire was conducted among 204 potato farmers in six districts of Uganda (i.e., Kabale, Kisoro, Mbale, Kapchorwa, Mubende, and Kyegegwa) during August and September 2013. Diseases, insect pests, price fluctuations, and low market prices were the four highest ranked constraints in potato production, in order of decreasing importance. Cutworms (Agrotis spp.), aphids (Myzus persicae (Sulzer)), and potato tuber moth (Phthorimaea operculella (Zeller)) were the three most severe insect pests. Ants (Dorylis orantalis Westwood), whiteflies (Bemisia tabaci (Gennadius)), and leafminer flies (Liriomyza huidobrensis (Blanchard)) were pests of moderate importance. Major yield losses are predominantly due to late blight (Phytophthora infestans (Mont.) de Bary) and reached 100% without chemical control in the districts of Kabale, Kisoro, Mbale, and Kapchorwa. On average, farmers had little to moderate knowledge about pest characteristics. The predominant control methods were use of fungicides (72% of respondents) and insecticides (62% of respondents). On average, only 5% of the 204 farmers knew about insect pests and their natural enemies. This lack of knowledge calls for training of both farmers and extension workers in insect pest identification, their biology, and control. Empowering farmers with knowledge about insect pests is essential for the reduction of pesticide misuse and uptake of more environmentally friendly approaches like IPM. Field surveys would need follow-up in order to assess the actual field infestation rates and intensities of each insect pest and compare the results with the responses received from farmers.

La ausencia de Políticas Públicas sobre combustibles de origen biológico en Colombia y sus efectos sobre el medio ambiente

El cambio climático ha sido una de las mayores preocupaciones de los Estados en las últimas décadas como resultado de más de un siglo de explotación y empleo de un recurso natural no renovable que fue el motor del mundo en el siglo pasado y aún hoy mantiene a flote la economía de los países, el petróleo. En la actualidad, las reservas de petróleo han empezando a escasear. Por tanto, se han empezado a desarrollar estrategias para evitar una crisis energética global. La más importante la constituye la investigación y puesta en práctica de energías renovables y ambientalmente amigables como los biocombustibles. Los biocombustibles se perciben como una solución energética para el país. Sin embargo, la falta de articulación en la gestión de los actores de gobierno encargados de su puesta en práctica y de parámetros normativos fragmentarios al respecto, ocasiona una ausencia de políticas públicas de biocombustibles en Colombia; generando así que los compromisos ambientales y de reducción de emisiones de gas carbónico sean hoy, una meta por conquistar.

Aproximación a un marco teórico sobre desarrollo sostenible y eco-eficiencia

En los últimos años el termino Desarrollo Sostenible ha tomado gran relevancia en el contexto internacional. El mundo entero es consiente del daño ambiental que las actividades del hombre han causado al planeta tierra. El presente documento pretende hacer una aproximación a un marco teórico en donde se definen y se caracterizan los conceptos de Desarrollo Sostenible y Eco-Eficiencia. A través de la revisión de documentos oficiales de la Organización de las Naciones Unidas se busca exponer la evolución del Desarrollo Sostenible como tema de importancia mundial. Posteriormente se muestra la relación entre éste concepto y la Eco – Eficiencia aplicada a los negocios, y cómo las empresas pueden lograr que sus actividades sean mas amigables con el medio ambiente. Con esta revisión bibliográfica queremos mostrar cómo en esta nueva era de desarrollo y globalización es primordial tener en cuenta que para lograr satisfacer las necesidades de los seres humanos es necesario reconocer los limites de la naturaleza y respetarla para asegurar la sobrevivencia de la raza humana.

Contribuyendo al reto de la sostenibilidad: el sistema producto- servicio en la industria de la moda rápida

El presente proyecto de grado se inscribe bajo el proyecto de Responsabilidad Social Empresarial de la línea de investigación de Realidad Empresarial de la Facultad de Administración de la Universidad del Rosario. El problema de investigación surge de dos problemas actuales, que convergen en la insostenibilidad a largo y mediano plazo de la manera en que se hacen la mayoría de los negocios hoy en día. El primer problema, es el de suficiencia, se evidencia desde el punto de vista del consumidor, el cual pareciera estar diseñado para comprar y acumular objetos y cosas que luego de un tiempo irán a parar a la basura. El segundo problema es el modelo de negocio que extrae recursos, los transforma, los comercializa de manera repetitiva y obliga al cliente a seguir comprando, olvidando que la mayoría de cosas que produce, terminan en el basurero. La deficiencia actual del consumismo insostenible y del diseño que no piensa en las generaciones futuras son dos caras de la misma moneda. Por eso es que se estudia el problema desde la perspectiva tanto del consumidor, como del productor. Las tendencias internacionales relacionadas con la sostenibilidad están llevando a los negocios por una nueva senda, la cual les dará ventajas competitivas a los adoptadores tempranos. A raíz de los problemas planteados y con el objetivo de encontrar la sostenibilidad empresarial, se estudia una posible solución para cada actor del problema. Por el lado del consumidor, se analiza la teoría que gira alrededor del consumo responsable y de cómo los consumidores tienen el poder de causar un efecto positivo con lo que mejor saben hacer: comprando (y eligiendo que comprar). Por el lado del productor se estudia un nuevo modelo de negocios llamado el sistema producto-servicio, el cual se enfoca a satisfacer necesidades de los clientes por medio de una combinación de prestación de servicios y facilitación de productos, en vez de la comercialización de estos. Es decir que en vez de vender cosas que los consumidores quieran acumular (problema de suficiencia), se les vende soluciones que satisfagan sus necesidades, reteniendo la compañía la propiedad sobre los productos que integran al servicio. Se estudia también de que maneras este modelo particular de sistemas producto-servicio puede ser recibido por los consumidores de hoy en día, tan acostumbrados al modelo actual. Se quiere explorar el sistema de productos y servicio como una alternativa empresarial perdurable que solucione los retos ambientales del siglo XXI. Para poder probar la viabilidad de este hipotético modelo que cambia los patrones de interacción de las empresas con los usuarios, se plantea una idea de negocio que integre productos y servicios para satisfacer las necesidades del cliente. Se escogió un área viii caracterizada por ser de las más consumistas y acumuladoras en cuanto al volumen de compras anual de los clientes: el negocio de la ropa. Y no solo cualquier tipo de ropa, sino el de la moda rápida, un modelo que obliga a los consumidores a comprar ropa con una frecuencia aún mayor. Se hizo esto con el objetivo de probar que el modelo propuesto puede funcionar inclusive bajo los supuestos más “consumistas” que existen hoy en día.

Aprendre colcant. Projecte de mobilitat de l’IES Felanitx

Este proyecto fue galardonado con el 1er Premio de Innovación Educativa 2009.

Aspectes físics i químics del destintatge de paper revista mitjançant tensioactius catiònics

En una tesi anterior (Puig, 2004) es varen estudiar els aspectes mecànics vinculats al desfibratge i als consums energètics associats al procés de desintegració per acabar quantificant les forces implicades en el procés d'individualització dels components de diferents paperots. Aquest estudi, ha permès conèixer les condicions de desintegració que condueixen a un mínim consum energètic, aspecte complementari al reciclatge i destintatge del paperot però molt important per aconseguir un procés realment sostenible. Degut als requeriments del mercat, hi ha un altre aspecte o vessant realment important com és l'eliminació de tinta. Aquest procés, malgrat la complexitat industrial, es pot reduir o simplificar en dues etapes: la desintegració i la flotació. Ambdues, per raons d'eficàcia i condicionades pels agents químics que s'utilitzen, es realitzen en medi fortament alcalí (entorn d'un pH a 12). Aquest fet, genera una forta contaminació (DQO elevada) i per tant, és un procés poc respectuós amb el medi ambient. Els factors que condicionen treballar en medi alcalí són principalment, el despreniment de la tinta del suport, clarament accelerat en medi bàsic i fonamental per un bon destintatge i la utilització de tensioactius aniònics. Aquests tensioactius són sensibles al pH i la seva eficàcia disminueix en medi neutre o quasi neutre. Atès el que s'ha exposat, s'ha plantejat aquesta tesi que porta per títol "Aspectes Físics i Químics del Destintatge de Paper Revista mitjançant Tensioactius Catiònics", com un estudi del procés de destintatge de paper revista recuperat parant especial atenció a les variables físico-químiques i mecàniques del procés i a la seva influència en el despreniment i fragmentació de la tinta, així com en el procés d'eliminació de la tinta per flotació per tal d'avaluar la viabilitat d'un procés de destintatge en medi neutre enfront del destintatge alcalí convencional. S'ha utilitzat, com a paperot a destintar, el paper revista ja que aquest tipus de paper representa un percentatge elevat del paper recuperat a la Unió Europea. A més, aquest tipus de paper és utilitzat habitualment en les plantes de destintatge industrials per millorar les propietats de les suspensions destintades de paper de diari. La utilització de tensioactius catiònics és deguda a que la seva activitat no es veu afectada pel pH de la suspensió. Així, durant la comparació dels processos de destintatge en medi neutre i en medi alcalí, les eficàcies dels processos no es veuran influenciades pel grau d'ionització del tensioactiu. Donada l'absència d'estudis sobre la influència de les variables del procés en les mesures de concentració efectiva de tinta residual (ERIC) i ja que s'ha emprat aquest paràmetre per avaluar el despreniment i fragmentació de la tinta durant l'etapa de desintegració. En primer lloc, s'ha plantejat un estudi fonamental de la influència que poden tenir les variables del procés (granulometria, concentració de tinta i tipus de suport) en aquest paràmetre. Pel que fa a l'etapa de flotació, s'estudiarà l'efectivitat d'aquesta etapa, posant especial atenció a la capacitat del tensioactiu per eliminar tota la tinta despresa en l'etapa de desintegració. A més, donada la poca informació bibliogràfica referida als mecanismes de flotació amb tensioactius catiònics i la influència que té l'adsorció d'aquests agents per part de la suspensió paperera en l'etapa de flotació, s'ha dut a terme un estudi de l'adsorció dels tensioactius catiònics per part dels components d'una suspensió paperera. Per tant, la tesi realitzada té com a objectius:  Estudi fonamental de les mesures de ERIC (concentració efectiva de tinta residual) amb suports específics.  Estudi de la desintegració en medi neutre i comparació amb la desintegració clàssica.  Modelització del desfibratge de paperot a l'etapa de desintegració.  Estudi de l'eliminació de tinta per flotació en medi neutre i comparació amb la flotació clàssica.  Estudi del mecanisme d'adsorció de tensioactius en suspensions de cel·lulosa sintètica i de paperot.

Nitrogen management is essential to prevent tropical oil palm plantations from causing ozone pollution

More than half the world's rainforest has been lost to agriculture since the Industrial Revolution. Among the most widespread tropical crops is oil palm (Elaeis guineensis): global production now exceeds 35 million tonnes per year. In Malaysia, for example, 13% of land area is now oil palm plantation, compared with 1% in 1974. There are enormous pressures to increase palm oil production for food, domestic products, and, especially, biofuels. Greater use of palm oil for biofuel production is predicated on the assumption that palm oil is an “environmentally friendly” fuel feedstock. Here we show, using measurements and models, that oil palm plantations in Malaysia directly emit more oxides of nitrogen and volatile organic compounds than rainforest. These compounds lead to the production of ground-level ozone (O3), an air pollutant that damages human health, plants, and materials, reduces crop productivity, and has effects on the Earth's climate. Our measurements show that, at present, O3 concentrations do not differ significantly over rainforest and adjacent oil palm plantation landscapes. However, our model calculations predict that if concentrations of oxides of nitrogen in Borneo are allowed to reach those currently seen over rural North America and Europe, ground-level O3 concentrations will reach 100 parts per billion (109) volume (ppbv) and exceed levels known to be harmful to human health. Our study provides an early warning of the urgent need to develop policies that manage nitrogen emissions if the detrimental effects of palm oil production on air quality and climate are to be avoided.

Farm level tree planting in Pakistan: The role of farmers' perceptions and attitudes

The low proportion of forested land and continuing degradation of existing forest cover are serious threats to the sustainability of forestry in Pakistan. Farm forestry has been identified as a feasible solution, particularly in the plain areas. Applying the Theory of Planned Behaviour in a survey of 124 farmers in Dera Ismail Khan district of Pakistan's North West Frontier Province showed that farmers' willingness to grow trees on their farms is a function of their attitudes towards the advantages and disadvantages of growing trees, their perception of the opinions of salient referents and factors that encourage and discourage farm level tree planting. Farmers viewed farm forestry as economically beneficial and environmentally friendly. Tree planting was perceived as increasing income, providing wood for fuel and furniture, controlling erosion and pollution and providing shade for humans and animals. Farmers saw hindrance in agricultural operations and the harbouring of insects, pests and diseases as negative impacts of tree planting; however, these were outweighed by their perceptions of positive impacts. Tree growing decisions of farmers were influenced by the opinions of family members, owners/tenants, fellow farmers and village elders. The factors that significantly predicted farm level tree planting were availability of barren land, lack of markets, lack of nurseries and damage caused by animals and humans. Farm forestry programmes are more likely to be successful if they acknowledge and address the factors which underlie farmers' reasons for planting or not planting trees.