Making modelling count - increasing the contribution of shelf-seas community and ecosystem models to policy development and management

Marine legislation is becoming more complex and marine ecosystem-based management is specified in national and regional legislative frameworks. Shelf-seas community and ecosystem models (hereafter termed ecosystem models) are central to the delivery of ecosystem-based management, but there is limited uptake and use of model products by decision makers in Europe and the UK in comparison with other countries. In this study, the challenges to the uptake and use of ecosystem models in support of marine environmental management are assessed using the UK capability as an example. The UK has a broad capability in marine ecosystem modelling, with at least 14 different models that support management, but few examples exist of ecosystem modelling that underpin policy or management decisions. To improve understanding of policy and management issues that can be addressed using ecosystem models, a workshop was convened that brought together advisors, assessors, biologists, social scientists, economists, modellers, statisticians, policy makers, and funders. Some policy requirements were identified that can be addressed without further model development including: attribution of environmental change to underlying drivers, integration of models and observations to develop more efficient monitoring programmes, assessment of indicator performance for different management goals, and the costs and benefit of legislation. Multi-model ensembles are being developed in cases where many models exist, but model structures are very diverse making a standardised approach of combining outputs a significant challenge, and there is a need for new methodologies for describing, analysing, and visualising uncertainties. A stronger link to social and economic systems is needed to increase the range of policy-related questions that can be addressed. It is also important to improve communication between policy and modelling communities so that there is a shared understanding of the strengths and limitations of ecosystem models.

Pulsed evaporative cooling of ion cloud in an electron beam ion trap

A technique for producing cold ensembles of trapped highly charged ions is described. The ions, trapped in an electron beam ion trap, can undergo a drastic contraction during the pulsed mode of evaporative cooling, if a truncated Boltzmann distribution is assumed. The underlying theory and the experimental results are presented.

Bandas de sopro – um diálogo transcultural

Brass bands are among the most widespread instrumental ensembles in the world, yet there has been little academic interest in them. This is because they stand in a space between art and authenticity, as their repertoires are thought to lack artistic merit while their military legacies have disconnected them from the ‘authentic’ music of ‘the people’. This paper aims to show how it is precisely this intermediary position which has attracted the attention of some (ethno)musicologists, and a growing number of studies demonstrate the analytic potential of this musical universe in a wide range of contexts across the globe.

Effect of temporal separation on synchronization in rhythmic performance

A variety of short time delays inserted between pairs of subjects were found to affect their ability to synchronize a musical task. The subjects performed a clapping rhythm together from separate sound-isolated rooms via headphones and without visual contact. One-way time delays between pairs were manipulated electronically in the range of 3 to 78 ms. We are interested in quantifying the envelope of time delay within which two individuals produce synchronous per- formances. The results indicate that there are distinct regimes of mutually coupled behavior, and that `natural time delay'o¨delay within the narrow range associated with travel times across spatial arrangements of groups and ensembleso¨supports the most stable performance. Conditions outside of this envelope, with time delays both below and above it, create characteristic interaction dynamics in the mutually coupled actions of the duo. Trials at extremely short delays (corresponding to unnaturally close proximity) had a tendency to accelerate from anticipation. Synchronization lagged at longer delays (larger than usual physical distances) and produced an increasingly severe deceleration and then deterioration of performed rhythms. The study has implications for music collaboration over the Internet and suggests that stable rhythmic performance can be achieved by `wired ensembles' across distances of thousands of kilometers.

Nonlinear excitations in strongly-coupled plasma lattices: envelope solitons, kinks and intrinsic localized modes

Ensembles of charged particles (plasmas) are a highly complex form of matter, most often modeled as a many-body system characterized by weak inter-particle interactions (electrostatic coupling). However, strongly-coupled plasma configurations have recently been produced in laboratory, either by creating ultra-cold plasmas confined in a trap or by manipulating dusty plasmas in discharge experiments. In this paper, the nonlinear aspects involved in the motion of charged dust grains in a one-dimensional plasma monolayer (crystal) are discussed. Different types of collective excitations are reviewed, and characteristics and conditions for their occurrence in dusty plasma crystals are discussed, in a quasi-continuum approximation. Dust crystals are shown to support nonlinear kink-shaped supersonic solitary longitudinal excitations, as well as modulated envelope localized modes associated with longitudinal and transverse vibrations. Furthermore, the possibility for intrinsic localized modes (ILMs) — Discrete Breathers (DBs) — to occur is investigated, from first principles. The effect of mode-coupling is also briefly considered. The relation to previous results on atomic chains, and also to experimental results on strongly-coupled dust layers in gas discharge plasmas, is briefly discussed.

Selective hydrogenation of acetylene in ethylene rich feed streams at high pressure over ligand modified Pd/TiO2

The selective hydrogenation of acetylene from ethylene rich streams was conducted at high pressure and in the presence of CO over two 1 wt% loaded Pd/TiO2 catalysts with differing dispersions. Although, the more poorly dispersed sample did not result in high acetylene conversion only a small proportion of the total available ethylene was hydrogenated to ethane. The more highly dispersed sample was able to remove acetylene to a level below the detection limit but this was at the expense of significant proportion (ca. 30%) of the available ethylene. Modification of the catalysts by exposure to triphenyl phosphine or diphenyl sulfide and subsequent reduction at 393 K led to improved performance with increased conversion of acetylene and decreased propensity to hydrogenate ethylene resulting in an overall net gain in ethylene. The higher dispersed sample which had been ligand modified provided the best results overall and in particular for the diphenyl sulfide treated sample which was able to completely eliminate acetylene and still obtain a net gain in ethylene. The differences observed are thought to be due to the creation of appropriate active ensembles of Pd atoms which are able to accommodate acetylene but have limited ability to adsorb ethylene. Sub-surface hydrogen formation was suppressed, but not eliminated, by exposure to modifier.

Portfolio of Compositions investigating ensemble improvisation, distributed and real-time scoring, and multi-nodal input and output

This output is a collection of compositions which explore issues of ensemble improvisation, ensemble management and orchestration, real-time and distributed scoring, multi-nodal inputs and outputs, and animated and graphic notation. Compositions include: Activities I; tutti, duet, trio, solo, quartet; Lewitt Notations I; Webwork I; and Sometimes I feel the space between people (voices) in terms of tempos. These compositions are presented in computer animated scores which are synchronized through the network and subject to real-time modification and control. They can be performed by ensembles distributed over large physical spaces connected by the network. The scores for these compositions include software which displays the animations to the performers, software to structure and disseminate score events, and triggering software that allows the control of a performance to be distributed. Scores can also include live electronics which are coordinated with graphic events.

Dissipative Optomechanics in a Michelson--Sagnac Interferometer

Dissipative optomechanics studies the coupling of the motion of an optical element to the decay rate of a cavity. We propose and theoretically explore a realization of this system in the optical domain, using a combined Michelson-Sagnac interferometer, which enables a strong and tunable dissipative coupling. Quantum interference in such a setup results in the suppression of the lower motional sideband, leading to strongly enhanced cooling in the non-sideband-resolved regime. With state-of-the-art parameters, ground-state cooling and low-power quantum-limited position transduction are both possible. The possibility of a strong, tunable dissipative coupling opens up a new route towards observation of such fundamental optomechanical effects as nonlinear dynamics. Beyond optomechanics, the suggested method can be readily transferred to other setups involving nonlinear media, atomic ensembles, or single atoms.

Ensemble effects in the coupling of acetylene to benzene on a bimetallic surface: A study with Pd{111}/Au

Acetylene coupling to benzene on the Pd(lll) surface is greatly enhanced by the presence of catalytically inert Au atoms. LEED and Auger spectroscopy show that progressive annealing of Au overlayers on Pd(lll) leads to the formation of a series of random surface alloys with continuously varying composition. Cyclization activity is a strong function of surface composition-the most efficient catalyst corresponds to a surface of composition similar to 85% Pd. CO TPD and HREELS data show that acetylene cyclization activity is not correlated with the availability of singleton Pd atoms, nor just with the presence of 3-fold pure Pd sites-the preferred chemisorption site for C2H2 on Pd{111}. The data can be quantitatively rationalized in terms of a simple model in which catalytic activity is dominated by Pd6Au and Pd-7 surface ensembles, allowance being made for the known degree to which pure Pd{111} decomposes the reactant and product molecules.

Coherently Opening a High-Q Cavity

We propose a general framework to effectively `open' a high-Q resonator, that is, to release the quantum state initially prepared in it in the form of a traveling electromagnetic wave. This is achieved by employing a mediating mode that scatters coherently the radiation from the resonator into a one-dimensional continuum of modes such as a waveguide. The same mechanism may be used to `feed' a desired quantum field to an initially empty cavity. Switching between an `open' and `closed' resonator may then be obtained by controlling either the detuning of the scatterer or the amount of time it spends in the resonator. First, we introduce the model in its general form, identifying (i) the traveling mode that optimally retains the full quantum information of the resonator field and (ii) a suitable figure of merit that we study analytically in terms of the system parameters. Then, we discuss two feasible implementations based on ensembles of two-level atoms interacting with cavity fields. In addition, we discuss how to integrate traditional cavity QED in our proposal using three-level atoms.

Dynamics of interacting Dicke model in a coupled-cavity array

We consider the dynamics of an array of mutually interacting cavities, each containing an ensemble of N two-level atoms. By exploring the possibilities offered by ensembles of various dimensions and a range of atom-light and photon-hopping values, we investigate the generation of multisite entanglement, as well as the performance of excitation transfer across the array, resulting from the competition between on-site nonlinearities of the matter-light interaction and intersite photon hopping. In particular, for a three-cavity interacting system it is observed that the initial excitation in the first cavity completely transfers to the ensemble in the third cavity through the hopping of photons between the adjacent cavities. Probabilities of the transfer of excitation of the cavity modes and ensembles exhibit characteristics of fast and slow oscillations governed by coupling and hopping parameters, respectively. In the large-hopping case, by seeding an initial excitation in the cavity at the center of the array, a tripartite W state, as well as a bipartite maximally entangled state, is obtained, depending on the interaction time. Population of the ensemble in a cavity has a positive impact on the rate of excitation transfer between the ensembles and their local cavity modes. In particular, for ensembles of five to seven atoms, tripartite W states can be produced even when the hopping rate is comparable to the cavity-atom coupling rate. A similar behavior of the transfer of excitation is observed for a four-coupled-cavity system with two initial excitations.

Clustering-Based Ensemble Method as an Alternative to Stacking

One of the most popular techniques of generating classifier ensembles is known as stacking which is based on a meta-learning approach. In this paper, we introduce an alternative method to stacking which is based on cluster analysis. Similar to stacking, instances from a validation set are initially classified by all base classifiers. The output of each classifier is subsequently considered as a new attribute of the instance. Following this, a validation set is divided into clusters according to the new attributes and a small subset of the original attributes of the instances. For each cluster, we find its centroid and calculate its class label. The collection of centroids is considered as a meta-classifier. Experimental results show that the new method outperformed all benchmark methods, namely Majority Voting, Stacking J48, Stacking LR, AdaBoost J48, and Random Forest, in 12 out of 22 data sets. The proposed method has two advantageous properties: it is very robust to relatively small training sets and it can be applied in semi-supervised learning problems. We provide a theoretical investigation regarding the proposed method. This demonstrates that for the method to be successful, the base classifiers applied in the ensemble should have greater than 50% accuracy levels.

The effect of niobium and tantalum on physicochemical and catalytic properties of silver and platinum catalysts based on MCF mesoporous cellular foams

MCF, NbMCF and TaMCF Mesostructured Cellular Foams were used as supports for platinum and silver (1 wt%). Metallic and bimetallic catalysts were prepared by grafting of metal species on APTMS (3-aminopropyltrimethoxysilane) and MPTMS (2-mercaptopropyltrimethoxysilane) functionalized supports. Characterizations by X-ray diffraction (XRD), ultraviolet–visible (UV–Vis) spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray fluorescence (XRF) spectroscopy, and in situ Fourier Transform Infrared (FTIR) spectroscopy allowed to monitor the oxidation state of metals and surface properties of the catalysts, in particular the formation of bimetallic phases and the strong metal–support interactions. It was evidenced that the functionalization agent (APTMS or MPTMS) influenced the metals dispersion, the type of bimetallic species and Nb/Ta interaction with Pt/Ag. Strong Nb–Ag interaction led to the reduction of niobium in the support and oxidation of silver. MPTMS interacted at first with Pt to form Pt–Ag ensembles highly active in CH3OH oxidation. The effect of Pt particle size and platinum–silver interaction on methanol oxidation was also considered. The nature of the functionalization agent strongly influenced the species formed on the surface during reaction with methanol and determined the catalytic activity and selectivity.

À sombra de um passado por contar: banda de música de Santiago de Riba-Ul

O presente trabalho inscreve-se no domínio da etnomusicologia e propõe-se abordar o fenómeno das bandas filarmónicas em Portugal numa perspetiva eminentemente histórica, usando como recursos metodológicos a pesquisa de arquivo e o trabalho de campo. Tomando como exemplo a Banda de Música de Santiago de Riba-Ul, que se autodesigna “a banda mais antiga de Portugal”, e tentando contextualizar a sua existência bicentenária no movimento filarmónico nacional, procurei explorar o desenvolvimento que o grupo teve ao longo do tempo, a partir da análise de documentos de arquivo em articulação com os discursos produzidos no domínio da oralidade e do periodismo local. Através da análise histórica reflito sobre movimentos semelhantes aos da implantação de agrupamentos filarmónicos na Europa, a estrutura democratizada e multifuncional que foram adquirindo ao longo do tempo, os espaços de ocorrência, o repertório e os instrumentos. Tendo em conta que o universo das bandas filarmónicas em Portugal representa ainda um domínio pouco estudado, procurei neste trabalho definir um quadro conceptual sobre as diferentes designações associadas a agrupamentos de sopro em Portugal, que recorre à história como ferramenta essencial para o entendimento da relação entre designações e conceitos a partir da análise de funções, contextos e repertórios. Através do estudo de caso da Banda de Música de Santiago de Riba-Ul, procurei estabelecer um modelo de análise que é revelador sobre o modo como, em muitos casos, as bandas usam o passado (real, imaginado, vivido ou mitificado), transformado em memória semântica, como forma de legitimar o presente, convertendo a própria banda num documento/monumento. Esse estatuto conduz à reprodução do modelo de polivalência que o passado lhe legou e oferece-lhe, através de um jogo coerente de cumplicidades no seio do movimento filarmónico em Portugal, um lugar cativo no macrocosmos que aqui defini como um campo social institucional, a partir da proposta conceptual de Bourdieu.

La mise en registre automatique des surfaces acquises à partir d’objets déformables

La mise en registre 3D (opération parfois appelée alignement) est un processus de transformation d’ensembles de données 3D dans un même système de coordonnées afin d’en aligner les éléments communs. Deux ensembles de données alignés ensemble peuvent être les scans partiels des deux vues différentes d’un même objet. Ils peuvent aussi être deux modèles complets, générés à des moments différents, d’un même objet ou de deux objets distincts. En fonction des ensembles de données à traiter, les méthodes d’alignement sont classées en mise en registre rigide ou non-rigide. Dans le cas de la mise en registre rigide, les données sont généralement acquises à partir d’objets rigides. Le processus de mise en registre peut être accompli en trouvant une seule transformation rigide globale (rotation, translation) pour aligner l’ensemble de données source avec l’ensemble de données cible. Toutefois, dans le cas non-rigide, où les données sont acquises à partir d’objets déformables, le processus de mise en registre est plus difficile parce qu’il est important de trouver à la fois une transformation globale et des déformations locales. Dans cette thèse, trois méthodes sont proposées pour résoudre le problème de mise en registre non-rigide entre deux ensembles de données (représentées par des maillages triangulaires) acquises à partir d’objets déformables. La première méthode permet de mettre en registre deux surfaces se chevauchant partiellement. La méthode surmonte les limitations des méthodes antérieures pour trouver une grande déformation globale entre deux surfaces. Cependant, cette méthode est limitée aux petites déformations locales sur la surface afin de valider le descripteur utilisé. La seconde méthode est s’appuie sur le cadre de la première et est appliquée à des données pour lesquelles la déformation entre les deux surfaces est composée à la fois d’une grande déformation globale et de petites déformations locales. La troisième méthode, qui se base sur les deux autres méthodes, est proposée pour la mise en registre d’ensembles de données qui sont plus complexes. Bien que la qualité que elle fournit n’est pas aussi bonne que la seconde méthode, son temps de calcul est accéléré d’environ quatre fois parce que le nombre de paramètres optimisés est réduit de moitié. L’efficacité des trois méthodes repose sur des stratégies via lesquelles les correspondances sont déterminées correctement et le modèle de déformation est exploité judicieusement. Ces méthodes sont mises en oeuvre et comparées avec d’autres méthodes sur diverses données afin d’évaluer leur robustesse pour résoudre le problème de mise en registre non-rigide. Les méthodes proposées sont des solutions prometteuses qui peuvent être appliquées dans des applications telles que la mise en registre non-rigide de vues multiples, la reconstruction 3D dynamique, l’animation 3D ou la recherche de modèles 3D dans des banques de données.