Developments in the Theory of X-ray Absorption and Compton Scattering.

Thesis (Ph.D.)--University of Washington, 2016-06

Dynamic force balances for short-duration hypersonic testing facilities

Two force balance techniques for use in hypersonic impulse facilities are compared by measuring the drag force on a 30° semi-apex-angle blunt cone model in a hypersonic shock tunnel at a free stream Mach number of 5.75. An accelerometer-based balance and a stress-wave force balance were tested simultaneously on the same model to measure the drag force. It was found that drag force measurements could be made using both techniques in a flow with a 450-μ s test period. The measured drag forces compared well with the theoretical values estimated using Newtonian theory.

An examination of the dynamic relationship between self-efficacy and performance across levels of analysis and levels of specificity

This research used resource allocation theory to generate predictions regarding dynamic relationships between self-efficacy and task performance from 2 levels of analysis and specificity. Participants were given multiple trials of practice on an air traffic control task. Measures of task-specific self-efficacy and performance were taken at repeated intervals. The authors used multilevel analysis to demonstrate differential and dynamic effects. As predicted, task-specific self-efficacy was negatively associated with task performance at the within-person level. On the other hand, average levels of task-specific self-efficacy were positively related to performance at the between-persons level and mediated the effect of general self-efficacy. The key findings from this research relate to dynamic effects - these results show that self-efficacy effects can change over time, but it depends on the level of analysis and specificity at which self-efficacy is conceptualized. These novel findings emphasize the importance of conceptualizing self-efficacy within a multilevel and multispecificity framework and make a significant contribution to understanding the way this construct relates to task performance.

Integrating runtime assertions with dynamic types: Structuring a derivation from an incomputable specification

An inherent incomputability in the specification of a functional language extension that combines assertions with dynamic type checking is isolated in an explicit derivation from mathematical specifications. The combination of types and assertions (into "dynamic assertion-types" - DATs) is a significant issue since, because the two are congruent means for program correctness, benefit arises from their better integration in contrast to the harm resulting from their unnecessary separation. However, projecting the "set membership" view of assertion-checking into dynamic types results in some incomputable combinations. Refinement of the specification of DAT checking into an implementation by rigorous application of mathematical identities becomes feasible through the addition of a "best-approximate" pseudo-equality that isolates the incomputable component of the specification. This formal treatment leads to an improved, more maintainable outcome with further development potential.

A methodology for analysis and control of discrete event dynamic systems

The rapid developments in computer technology have resulted in a widespread use of discrete event dynamic systems (DEDSs). This type of system is complex because it exhibits properties such as concurrency, conflict and non-determinism. It is therefore important to model and analyse such systems before implementation to ensure safe, deadlock free and optimal operation. This thesis investigates current modelling techniques and describes Petri net theory in more detail. It reviews top down, bottom up and hybrid Petri net synthesis techniques that are used to model large systems and introduces on object oriented methodology to enable modelling of larger and more complex systems. Designs obtained by this methodology are modular, easy to understand and allow re-use of designs. Control is the next logical step in the design process. This thesis reviews recent developments in control DEDSs and investigates the use of Petri nets in the design of supervisory controllers. The scheduling of exclusive use of resources is investigated and an efficient Petri net based scheduling algorithm is designed and a re-configurable controller is proposed. To enable the analysis and control of large and complex DEDSs, an object oriented C++ software tool kit was developed and used to implement a Petri net analysis tool, Petri net scheduling and control algorithms. Finally, the methodology was applied to two industrial DEDSs: a prototype can sorting machine developed by Eurotherm Controls Ltd., and a semiconductor testing plant belonging to SGS Thomson Microelectronics Ltd.

The impact of brand owner on consumers' brand perceptions : a development of Heider's Balance Theory

Studies have shown that the brand “owner” is very influential in positioning the brand and when the brand “owner” ceases his or her active role the brand will be perceived differently by the consumers. Balance Theory (HBT), a cognitive psychological theory, studies the triadic relationships between two persons and an entity and predicts that when a person’s original perception of the relationship is disturbed, the person restructures to a new balanced perception. Consequently, this research was undertaken to: conceptualize the brand owner’s impact on consumer’s brand perception; test the applicability of both the static and dynamic predictions of the Heider’s Balance Theory in brand owner-consumer-brand relation (OCB); construct and test a model of brand owner-consumer-brand relation; and examine if personality has an influence on OCB. A discovery-oriented approach was taken to understand the selected market segment, the ready-to-wear and diffusion lines of international designer labels. Chinese Brand Personality Scale, fashion proneness and hedonic and utilitarian shopping scales were developed, and validated. 51 customers were surveyed. Both traditional and extended methods used in the Balance Theory were employed in this study. Responses to liked brand have been used to test and develop the model, while those for disliked brand were used for test and confirmation. A “what if’ experimental approach was employed to test the applicability of dynamic HBT theory in OCB Model. The hypothesized OCB Model has been tested and validated. Consumers have been found to have separate views on the brand and the brand owner; and their responses to contrasting ethical and non-ethical news of the brand owner are different. Personality has been found to have an influence and two personality adapted models have been tested and validated. The actual results go beyond the prediction of the Balance Theory. Dominant triple positive balance mode, dominant negative balance mode, and mode of extreme antipathy have been found. It has been found that not all balanced modes are good for the brand. Contrary to Heider’s findings, simply liking may not necessarily lead to unit relation in the OCB Model.

Automobile friction materials: a test instrument and technique for determining dynamic mechanical properties in relation to brake squeal

This study is primarily concerned with the problem of break-squeal in disc brakes, using moulded organic disc pads. Moulded organic friction materials are complex composites and due to this complexity it was thought that they are unlikely to be of uniform composition. Variation in composition would under certain conditions of the braking system, cause slight changes in its vibrational characteristics thus causing resonance in the high audio-frequency range. Dynamic mechanical propertes appear the most likely parameters to be related to a given composition's tendency to promote squeal. Since it was necessary to test under service conditions a review was made of all the available commercial test instruments but as none were suitable it was necessary to design and develop a new instrument. The final instrument design, based on longitudinal resonance, enabled modulus and damping to be determined over a wide range of temperatures and frequencies. This apparatus has commercial value since it is not restricted to friction material testing. Both used and unused pads were tested and although the cause of brake squeal was not definitely established, the results enabled formulation of a tentative theory of the possible conditions for brake squeal. The presence of a temperature of minimum damping was indicated which may be of use to braking design engineers. Some auxilIary testing was also performed to establish the effect of water, oil and brake fluid and also to determine the effect of the various components of friction materials.

Some aspects of the dynamic performance of machine tool structural joints

The work presented in this thesis is concerned with the dynamic behaviour of structural joints which are both loaded, and excited, normal to the joint interface. Since the forces on joints are transmitted through their interface, the surface texture of joints was carefully examined. A computerised surface measuring system was developed and computer programs were written. Surface flatness was functionally defined, measured and quantised into a form suitable for the theoretical calculation of the joint stiffness. Dynamic stiffness and damping were measured at various preloads for a range of joints with different surface textures. Dry clean and lubricated joints were tested and the results indicated an increase in damping for the lubricated joints of between 30 to 100 times. A theoretical model for the computation of the stiffness of dry clean joints was built. The model is based on the theory that the elastic recovery of joints is due to the recovery of the material behind the loaded asperities. It takes into account, in a quantitative manner, the flatness deviations present on the surfaces of the joint. The theoretical results were found to be in good agreement with those measured experimentally. It was also found that theoretical assessment of the joint stiffness could be carried out using a different model based on the recovery of loaded asperities into a spherical form. Stepwise procedures are given in order to design a joint having a particular stiffness. A theoretical model for the loss factor of dry clean joints was built. The theoretical results are in reasonable agreement with those experimentally measured. The theoretical models for the stiffness and loss factor were employed to evaluate the second natural frequency of the test rig. The results are in good agreement with the experimentally measured natural frequencies.

Toward a theory of coordinating:creating coordinating mechanisms in practice

This paper uses a practice perspective to study coordinating as dynamic activities that are continuously created and modified in order to enact organizational relationships and activities. It is based on the case of Servico, an organization undergoing a major restructuring of its value chain in response to a change in government regulation. In our case, the actors iterate between the abstract concept of a coordinating mechanism referred to as end-to-end management and its performance in practice. They do this via five performative–ostensive cycles: (1) enacting disruption, (2) orienting to absence, (3) creating elements, (4) forming new patterns, and (5) stabilizing new patterns. These cycles and the relationships between them constitute a process model of coordinating. This model highlights the importance of absence in the coordinating process and demonstrates how experiencing absence shapes subsequent coordinating activity.

Diversifying into technical clothing manufacture:a situated learning theory perspective

An organisation’s ability to internalise external knowledge and learn from various sources in undertaking new product development and/or entering a new market is crucial to its competitive performance. Nevertheless, little attention has been paid to how growth-oriented small firms identify and exploit entrepreneurial opportunities, i.e. take entrepreneurial action, related to such methods of development, in a mature, contracting industry. The latter is particularly relevant to recent discussion and debate in academic and policy-making circles concerning the salvage of the clothing manufacture industry in developed industrialised countries, by intensifying efforts relating to diversification into high value manufacturing sectors. This paper, based on an instrumental case-firm, demonstrates analytically how learning as entrepreneurial action relating to diversifying into /technical clothing – i.e. a high value manufacturing/innovatory sector - takes place, drawing on situated learning theory. It is argued that learning relating to such entrepreneurial action is dynamic in nature and is founded on specific organising principles that foster both inter- and intracommunal learning.

Dynamic learning as entrepreneurial action in the context of open innovation:an instrumental case from a communities-of-practice perspective

Recent scholarly discussion on open innovation put forward the notion that an organisation's ability to internalise external knowledge and learn from various sources in undertaking new product development is crucial to its competitive performance. Nevertheless, little attention has been paid to how growth-oriented small firms identify and exploit entrepreneurial opportunities (i.e. take entrepreneurial action) related to such development, in an open innovation context, from a social learning perspective. This chapter, based on an instrumental case-firm, demonstrates analytically how learning as entrepreneurial action takes place, drawing on situated learning theory. It is argued that such learning is dynamic in nature and is founded on specific organising principles that foster both inter- and intracommunal learning. © 2012, IGI Global.

Dynamic decision networks for decision-making in self-adaptive systems:a case study

Bayesian decision theory is increasingly applied to support decision-making processes under environmental variability and uncertainty. Researchers from application areas like psychology and biomedicine have applied these techniques successfully. However, in the area of software engineering and speci?cally in the area of self-adaptive systems (SASs), little progress has been made in the application of Bayesian decision theory. We believe that techniques based on Bayesian Networks (BNs) are useful for systems that dynamically adapt themselves at runtime to a changing environment, which is usually uncertain. In this paper, we discuss the case for the use of BNs, speci?cally Dynamic Decision Networks (DDNs), to support the decision-making of self-adaptive systems. We present how such a probabilistic model can be used to support the decision making in SASs and justify its applicability. We have applied our DDN-based approach to the case of an adaptive remote data mirroring system. We discuss results, implications and potential bene?ts of the DDN to enhance the development and operation of self-adaptive systems, by providing mechanisms to cope with uncertainty and automatically make the best decision.

Diversifying into technical clothing manufacture as entrepreneurial learning:a situated learning theory perspective

Purpose - The purpose of this paper is to demonstrate analytically how entrepreneurial action as learning relating to diversifying into technical clothing - i.e. a high-value manufacturing sector - can take place. This is particularly relevant to recent discussion and debate in academic and policy-making circles concerning the survival of the clothing manufacture industry in developed industrialised countries. Design/methodology/approach - Using situated learning theory (SLT) as the major analytical lens, this case study examines an episode of entrepreneurial action relating to diversification into a high-value manufacturing sector. It is considered on instrumentality grounds, revealing wider tendencies in the management of knowledge and capabilities requisite for effective entrepreneurial action of this kind. Findings - Boundary events, brokers, boundary objects, membership structures and inclusive participation that addresses power asymmetries are found to be crucial organisational design elements, enabling the development of inter- and intracommunal capacities. These together constitute a dynamic learning capability, which underpins entrepreneurial action, such as diversification into high-value manufacturing sectors. Originality/value - Through a refinement of SLT in the context of entrepreneurial action, the paper contributes to an advancement of a substantive theory of managing technological knowledge and capabilities for effective diversification into high-value manufacturing sectors. Copyright © 2014 Emerald Group Publishing Limited. All rights reserved.

Optimum Trajectory of Dynamic Input-Output Balance Model for Open Economy

When export and import is connected with output of basic production, and criterion functional represents a final state of economy, the generalization of classical qualitative results of the main-line theory on a case of dynamic input-output balance optimization model for open economy is given.

A world full of surprises:Bayesian theory of surprise to quantify degrees of uncertainty

In the specific area of software engineering (SE) for self-adaptive systems (SASs) there is a growing research awareness about the synergy between SE and artificial intelligence (AI). However, just few significant results have been published so far. In this paper, we propose a novel and formal Bayesian definition of surprise as the basis for quantitative analysis to measure degrees of uncertainty and deviations of self-adaptive systems from normal behavior. A surprise measures how observed data affects the models or assumptions of the world during runtime. The key idea is that a "surprising" event can be defined as one that causes a large divergence between the belief distributions prior to and posterior to the event occurring. In such a case the system may decide either to adapt accordingly or to flag that an abnormal situation is happening. In this paper, we discuss possible applications of Bayesian theory of surprise for the case of self-adaptive systems using Bayesian dynamic decision networks. Copyright © 2014 ACM.