High-resolution optical spectroscopy of the sharp-lined B-type star HD83206

Very-high-resolution (R~160000) spectroscopic observations are presented for the early B-type star, HD83206. Because it has very sharp metal lines, this star affords an opportunity to test theories of model atmospheres and line formation. Non-LTE model atmosphere calculations have been used to estimate the atmospheric parameters and absolute metal abundances (C, N, O, Mg and Si); an LTE analysis was also undertaken to investigate the validity of this simpler approach and to estimate an iron abundance. For the non-LTE calculations, there is excellent agreement with observations of the Balmer lines Ha and Hd and the lines of Siii and Siiii for atmospheric parameters of Teff~=21700+/-600K and logg~=4.00+/-0.15dex. The agreement is less convincing for the LTE calculations, and a higher gravity is deduced. Careful comparison of the metal line profiles with non-LTE calculations implies that the projected rotational and microturbulent velocities have maximum values of ~=5 and ~=2kms-1, respectively. The latter value is smaller than has often been adopted in LTE model atmosphere analyses of main-sequence stars. Non-LTE absolute metal abundances are estimated, and a comparison with those for normal B-type stars (deduced using similar non-LTE techniques) shows no significant differences. A comparison of the abundances deduced using non-LTE and LTE calculations implies systematic differences of 0.1-0.2dex, showing the importance of using a non-LTE approach when accurate absolute abundances are required. Its location in the Hertzsprung-Russell diagram and normal metal abundance lead us to conclude that HD83206 is probably a main-sequence B-type star. As such, it is among the sharpest-lined young B-type star discovered to date.

Understanding online customer repurchasing intention and the mediating role of trust - an empirical investigation in two developed countries

Although e-commerce adoption and customers initial purchasing behavior have been well studied in the literature, repeat purchase intention and its antecedents remain understudied. This study proposes a model to understand the extent to which trust mediates the effects of vendor-specific factors on customers intention to repurchase from an online vendor. The model was tested and validated in two different country settings. We found that trust fully mediates the relationships between perceived reputation, perceived capability of order fulfillment, and repurchasing intention, and partially mediates the relationship between perceived website quality and repurchasing intention in both countries. Moreover, multi-group analysis reveals no significant between-country differences of the model with regards to the antecedents and outcomes of trust, except the effect of reputation on trust. Academic and practical implications and future research are discussed. © 2009 Operational Research Society Ltd.

The Yin and Yang of vitamin D receptor (VDR) signaling in neoplastic progression: Operational networks and tissue-specific growth control

Substantive evidence implicates vitamin D receptor (VDR) or its natural ligand 1a,25-(OH)2 D3 in modulation of tumor growth. However, both human and animal studies indicate tissue-specificity of effect. Epidemiological studies show both inverse and direct relationships between serum 25(OH)D levels and common solid cancers. VDR ablation affects carcinogen-induced tumorigenesis in a tissue-specific manner in model systems. Better understanding of the tissue-specificity of vitamin D-dependent molecular networks may provide insight into selective growth control by the seco-steroid, 1a,25-(OH)2 D3. This commentary considers complex factors that may influence the cell- or tissue-specificity of 1a,25-(OH)2 D3/VDR growth effects, including local synthesis, metabolism and transport of vitamin D and its metabolites, vitamin D receptor (VDR) expression and ligand-interactions, 1a,25-(OH)2 D3 genomic and non-genomic actions, Ca2+ flux, kinase activation, VDR interactions with activating and inhibitory vitamin D responsive elements (VDREs) within target gene promoters, VDR coregulator recruitment and differential effects on key downstream growth regulatory genes. We highlight some differences of VDR growth control relevant to colonic, esophageal, prostate, pancreatic and other cancers and assess the potential for development of selective prevention or treatment strategies.

The effect of increased dietary fruit and vegetable consumption on endothelial activation, inflammation and oxidative stress in hypertensive volunteers

Background and aims

Public health campaigns recommend increased fruit and vegetable (FV) consumption as an effective means of cardiovascular risk reduction. During an 8 week randomised control trial among hypertensive volunteers, we noted significant improvements in endothelium-dependent vasodilatation with increasing FV consumption. Circulating indices of inflammation, endothelial activation and insulin resistance are often employed as alternative surrogates for systemic arterial health. The responses of several such biomarkers to our previously described FV intervention are reported here.
Methods and results

Hypertensive volunteers were recruited from medical outpatient clinics. After a common 4 week run-in period during which FV consumption was limited to 1 portion per day, participants were randomised to 1, 3 or 6 portions daily for 8 weeks. Venous blood samples for biomarker analyses were collected during the pre and post-intervention vascular assessments. A total of 117 volunteers completed the 12 week study. Intervention-related changes in circulating levels of high sensitivity C-reactive protein (hsCRP), soluble intracellular adhesion molecule-1 (sICAM-1), soluble vascular cell adhesion molecule-1 (sVCAM-1), von Willebrand factor (vWF) and plasminogen activator inhibitor-1 (PAI-1) did not differ significantly between FV groups. Similarly, there were no significant between group differences of change in homeostasis model assessment (HOMA) scores.
Conclusions

Despite mediating a significant improvement in acetylcholine induced vasodilatation, increased FV consumption did not affect a calculated measure of insulin resistance or concentrations of the circulating biomarkers measured during this study. Functional indices of arterial health such as endothelium-dependent vasomotion are likely to provide more informative cardiovascular end-points during short-term dietary intervention trials.

Resting energy expenditure in non-ventilated, non-sedated patients recovering from serious traumatic brain injury: Comparison of prediction equations with indirect calorimetry values

Background & aims: Little is known about energy requirements in brain injured (TBI) patients, despite evidence suggesting adequate nutritional support can improve clinical outcomes. The study aim was to compare predicted energy requirements with measured resting energy expenditure (REE) values, in patients recovering from TBI.

Methods: Indirect calorimetry (IC) was used to measure REE in 45 patients with TBI. Predicted energy requirements were determined using FAO/WHO/UNU and Harris–Benedict (HB) equations. Bland– Altman and regression analysis were used for analysis.

Results: One-hundred and sixty-seven successful measurements were recorded in patients with TBI. At an individual level, both equations predicted REE poorly. The mean of the differences of standardised areas of measured REE and FAO/WHO/UNU was near zero (9 kcal) but the variation in both directions was substantial (range 591 to þ573 kcal). Similarly, the differences of areas of measured REE and HB demonstrated a mean of 1.9 kcal and range 568 to þ571 kcal. Glasgow coma score, patient status, weight and body temperature were signi?cant predictors of measured REE (p < 0.001; R²⁼ 0.47).

Conclusions: Clinical equations are poor predictors of measured REE in patients with TBI. The variability in REE is substantial. Clinicians should be aware of the limitations of prediction equations when estimating energy requirements in TBI patients.

E-Participation and E-Participants: solving the patent ‘crisis’

One of the major planks of some visions for E-Gov is that there is a willing participatory group who are more than happy to be involved in new forms of democracy and will be active and useful suppliers of input to e-consultation or e-participation processes. This group is different from that which goes online to the government site web and signs a petition asking the prime minister to resign. It is becoming clear, though, that the commitment to e-participation may well be there in theory, but difficult to access in practice. Further, the participation which is most welcome can frequently require training and expertise which is not widely available or there may be differences in opinion as to the point of participation. In this paper I will look to the attempts to encourage participation in the patent system. The UK is about to initiate a trial system utilising New York Law School’s Peer To Patent project, but has also attempted to involve participants in previous consultation exercises. I will use these as demonstrations of the sorts of problems which e-participation has met, and consider whether this new form of E-Gov is perhaps being oversold. The interesting question is whether participation is a growing tool which can ensure better public services from the State. My conclusion is that consultation and participatory projects can demonstrate involvement and are certainly educative but e-participatory projects are most likely incapable of achieving the goals set by their more optimistic advocates. The paper emphasises the patents field, but the lessons from it can – I suggest – be viewed as indicators having wider governance relevance. The primary point being made is that the technocratic view is always over-optimistic.

Time-resolved optical spectroscopy of the pulsating DA white dwarf HS0507+0434B - New constraints on mode identification and pulsation properties

We present a detailed analysis of time-resolved optical spectra of the ZZ Ceti white dwarf, HS 0507+0434B. Using the wavelength dependence of observed mode amplitudes, we deduce the spherical degree, l, of the modes, most of which have l = 1. The presence of a large number of combination frequencies (linear sums or differences of the real modes) enabled us not only to test theoretical predictions but also to indirectly infer spherical and azimuthal degrees of real modes that had no observed splittings. In addition to the above, we measure line-of-sight velocities from our spectra. We find only marginal evidence for periodic modulation associated with the pulsation modes: at the frequency of the strongest mode in the lightcurve, we measure an amplitude of 2.6 +/- 1.0 kms(-1), which has a probability of 2% of being due to chance; for the other modes, we find lower values. Our velocity amplitudes and upper limits are smaller by a factor of two compared to the amplitudes found in ZZ Psc. We find that this is consistent with expectations based on the position of HS 0507+0434B in the instability strip. Combining all the available information from data such as ours is a first step towards constraining atmospheric properties in a convectionally unstable environment from an observational perspective.

Flexural performance of fibre reinforced concrete made with steel and synthetic fibres

The ductility of concrete made with commercially available steel and synthetic fibres has been investigated. Flexural stress–deflection relationships have been used to determine: flexural strength, flexural toughness, equivalent flexural strength, and equivalent flexural strength ratio. The flexural toughness of concrete was found to increase considerably when steel and synthetic fibres were used. However, equal dosages of different fibres did not result in specimens with the same flexural toughness. Flexural toughness differences of almost 35 J existed even at the same fibre dosage. This also resulted in considerable differences in the minimum required ground supported slab thickness.

The outer membrane of Brucella ovis shows increased permeability to hydrophobic probes and is more susceptible to cationic peptides than are the outer membranes of mutant rough Brucella abortus strains

The permeability of the outer membrane (OM) to hydrophobic probes and its susceptibility to bactericidal cationic peptides were investigated for natural rough Brucella ovis and for mutant rough Brucella abortus strains. The OM of B. ovis displayed an abrupt and faster kinetic profile than rough B. abortus during the uptake of the hydrophobic probe N-phenyl-naphthylamine. B. ovis was more sensitive than rough B. abortus to the action of cationic peptides. Bactenecins 5 and 7 induced morphological alterations on the OMs of both rough Brucella strains. B. ovis lipopolysaccharide (LPS) captured considerably more polymyxin B than LPSs from both rough and smooth B. abortus strains. Polymyxin B, poly-L-lysine, and poly-L-ornithine produced a thick coating on the surfaces of both strains, which was more evident in B. ovis than in rough B. abortus. The distinct functional properties of the OMs of these two rough strains correlate with some structural differences of their OMs and with their different biological behaviors in animals and culture cells.

Cinematic Peripheries of Dublin

The term periphery is, most of the time, used with or in relation to the centre. The ‘zoning’ taken by granted by the architect is unlike the one portrayed by the director who frames the differences of places in a non-linear manner. Film offers a constructed urban experience, suggesting the city to be a local network composed of nodes and links, rather than a centre and the margin. It is possible to talk about the construction of a new kind of network in film through a temporal representation of space, of the distant as the close. In this way, film may be a tool to shift the gaze from the bird’s-eye view to the eye level to create ‘a unified perceptual image of the city’, in Christine Boyer’s words. The experienced surface of the city is two-dimensional neither in fiction nor in reality. In this chapter, the nodes of Dublin are examined through two Irish films, Goldfish Memory (Elizabeth Gill, 2003) and Adam and Paul (Leonard Abrahamson, 2004). Specific elements of the city of Dublin, including walls, houses, pubs, streets, bridges, and parks, are analysed to understand the nature of the network of the city composed of nodes and their connections.

Modelling and characterization of ultrasonic consolidation process of Aluminium alloys

Ultrasonic consolidation process is a rapid manufacturing process used to join thin layers of metal at low temperatures and low energy consumption. In this work, finite element method has been used to simulate the ultrasonic consolidation of Aluminium alloys 6061 (AA-6061) and 3003 (AA-3003). A thermomechanical material model has been developed in the framework of continuum cyclic plasticity theory which takes into account both volume (acoustic softening) and surface (thermal softening due to friction) effects. A friction model based on experimental studies has been developed, which takes into account the dependence of coefficient of friction upon contact pressure, amount of slip, temperature and number of cycles. Using the developed material and friction model ultrasonic consolidation (UC) process has been simulated for various combinations of process parameters involved. Experimental observations are explained on the basis of the results obtained in the present study. The current research provides the opportunity to explain the differences of the behaviour of AA-6061 and AA-3003 during the ultrasonic consolidation process. Finally, trends of the experimentally measured fracture energies of the bonded specimen are compared to the predicted friction work at the weld interface resulted from the simulation at similar process condition. Similarity of the trends indicates the validity of the developed model in its predictive capability of the process. © 2008 Materials Research Society.

Evaluation of sources of uncertainties in microtensile bond strength of dental adhesive system for different specimen geometries

Objective: The aim of this research is to use finite element analysis (FEA) to quantify the effect of the sample shape and the imperfections induced during the manufacturing process of samples on the bond strength and modes of failure of dental adhesive systems through microtensile test. Using the FEA prediction for individual parameters effect, estimation of expected variation and spread of the microtensile bond strength results for different sample geometries is made. Methods: The estimated stress distributions for three different sample shapes, hourglass, stick and dumbbell predicted by FEA are used to predict the strength for different fracture modes. Parameters such as the adhesive thickness, uneven interface of the adhesive and composite and dentin, misalignment of axis of loading, the existence of flaws such as induced cracks during shaping the samples or bubbles created during application of the adhesive are considered. Microtensile experiments are performed simultaneously to measure bond strength and modes of failure. These are compared with the FEA results. Results: The relative bonding strength and its standard deviation for the specimens with different geometries measured through the microtensile tests confirm the findings of the FEA. The hourglass shape samples show lower tensile bond strength and standard deviation compared to the stick and dumbbell shape samples. ANOVA analysis confirms no significant difference between dumbbell and stick geometry results, and major differences of these two geometries compared to hourglass shape measured values. Induced flaws in the adhesive and misalignment of the angle of application of load have significant effect on the microtensile bond strength. Using adhesive with higher modulus the differences between the bond strength of the three sample geometries increase. Significance: The result of the research clarifies the importance of the sample geometry chosen in measuring the bond strength. It quantifies the effect of the imperfections on the bond strength for each of the sample geometries through a systematic and all embracing study. The results explain the reasons of the large spread of the microtensile test results reported by various researchers working in different labs and the need for standardization of the test method and sample shape used in evaluation of the dentin-adhesive bonding system. © 2007 Academy of Dental Materials.

Validation of a passive stereophotogrammetry system for imaging of the breast: A geometric analysis

The overall aim of this study was to assess the accuracy, reproducibility and stability of a high resolution passive stereophotogrammetry system to image a female mannequin torso, to validate measurements made on the textured virtual surface compared with those obtained using manual techniques and to develop an approach to make objective measurements of the female breast. 3D surface imaging was carried out on a textured female torso and measurements made in accordance with the system of mammometrics. Linear errors in measurements were less than 0.5 mm, system calibration produced errors of less than 1.0 mm over 94% over the surface and intra-rater reliability measured by ICC = 0.999. The mean difference between manual and digital curved surface distances was 1.36 mm with maximum and minimum differences of 3.15 mm and 0.02 mm, respectively. The stereophotogrammetry system has been demonstrated to perform accurately and reliably with specific reference to breast assessment. (C) 2011 IPEM. Published by Elsevier Ltd. All rights reserved.

Polemic and apocalyptic in the Cromwellian invasion of Scotland

This article describes the culture of print and polemic associated with the Cromwellian invasion of Scotland and the resistance of the Church of Scotland. It argues that print solidified Parliamentary ideas during the invasion but that it did not continue to do so after English dominance had been established. These texts illustrate the divisions between the mentalité of the Cromwellian rank-and-file and that of the rather small and probably unrepresentative body of opinion formers who sought to control and represent it.

Expert opinion on the cough hypersensitivity syndrome in respiratory medicine

In 2011, a European Respiratory Society Task Force embarked on a process to determine the position and clinical relevance of the cough hypersensitivity syndrome, a disorder characterised by troublesome coughing often triggered by low levels of thermal, mechanical or chemical exposure, in the management of patients with chronic cough. A 21-component questionnaire was developed by an iterative process supported by a literature review. 44 key opinion leaders in respiratory medicine were selected and interviewed as to their opinions. There was a high degree of unanimity in the responses obtained, with all opinion leaders supporting the concept of cough hypersensitivity as a clinically useful paradigm. The classic stratification of cough into asthmatic, rhinitic and reflux-related phenotypes was supported. Significant disparity of opinion was seen in the response to two questions concerning the therapy of chronic cough. First, the role of acid suppression in reflux cough was questioned. Secondly, the opinion leaders were split as to whether a trial of oral steroids was indicated to establish a diagnosis of eosinophilic cough. The cough hypersensitivity syndrome was clearly endorsed by the opinion leaders as a valid and useful concept. They considered that support of patients with chronic cough was inadequate and the Task Force recommends that further work is urgently required in this neglected area.