Performance evaluation of reverse osmosis (RO) pre-treatment technologies for in-land brackish water treatment

Integration of renewable energy with desalination technologies has emerged as an attractive solution to augment fresh water supply sustainably. Fouling and scaling are still considered as limiting factors in membrane desalination processes. For brackish water treatment, pre-treatment of reverse osmosis (RO) feed water is a key step in designing RO plants avoiding membrane fouling. This study aims to compare at pilot scale the rejection efficiency of RO membranes with multiple pre-treatment options at different water recoveries (30, 35, 40, 45 and 50%) and TDS concentrations (3500, 4000, and 4500mg/L). Synthetic brackish water was prepared and performance evaluation were carried out using brackish water reverse osmosis (BWRO) membranes (Filmtec LC-LE-4040 and Hydranautics CPA5-LD-4040) preceded by 5 and 1μm cartridge filters, 0.02μm ultra-filtration (UF) membrane, and forward osmosis (FO) membrane using 0.25M NaCl and MgCl2 as draw solutions (DS). It was revealed that FO membrane with 0.25M MgCl2 used as a draw solution (DS) and Ultra-filtration (UF) membrane followed by Filmtec membrane gave overall 98% rejection but UF facing high fouling potential due to high applied pressure. Use of 5 and 1μm cartridge filter prior to Filmtec membrane also showed effective results with 95% salt rejection.

Angular distribution of prompt photons using the compact muon solenoid detector at a square root of S = 7 TeV

The study of the angular distribution of photon plus jet events in pp collisions at [special characters omitted] = 7 TeV with the Compact Muon Solenoid (CMS) detector is presented. The photon is restricted to the central region of the detector (:η: <1.4442) while the jet is allowed to be present in both central and forward regions of CMS (:η: < 2.4). Dominant backgrounds due to jets fragmenting into neutral mesons are accounted for through the use of a template method that discriminates between signal and background. The angular distribution, :η*:, is defined as the absolute value of the difference in η between the leading photon and leading jet in an event divided by two. The angular distribution ranging from 0–1.4 was examined and compared with next-to-leading order QCD predictions and was found to be in good agreement.

Estensione dell'Abstraction Layer di DTNperf alle API di IBR-DTN

Sono dette “challenged networks” quelle reti in cui lunghi ritardi, frequenti partizionamenti e interruzioni, elevati tassi di errore e di perdita non consentono l’impiego dei classici protocolli di comunicazione di Internet, in particolare il TCP/IP. Il Delay-/Disruption-Tolerant Networking (DTN) è una soluzione per il trasferimento di dati attraverso queste reti. L’architettura DTN prevede l’introduzione, sopra il livello di trasporto, del cosiddetto “bundle layer”, che si occupa di veicolare messaggi, o bundle, secondo l’approccio store-and-forward: ogni nodo DTN conserva persistentemente un bundle finché non si presenta l’opportunità di inoltrarlo al nodo successivo verso la destinazione. Il protocollo impiegato nel bundle layer è il Bundle Protocol, le cui principali implementazioni sono tre: DTN2, l’implementazione di riferimento; ION, sviluppata da NASA-JPL e più orientata alle comunicazioni spaziali; IBR-DTN, rivolta soprattutto a dispositivi embedded. Ciascuna di esse offre API che consentono la scrittura di applicazioni in grado di inviare e ricevere bundle. DTNperf è uno strumento progettato per la valutazione delle prestazioni in ambito DTN. La più recente iterazione, DTNperf_3, è compatibile sia con DTN2 che con ION nella stessa versione del programma, grazie all’introduzione di un “Abstraction Layer” che fornisce un’unica interfaccia per l’interazione con le diverse implementazioni del Bundle Protocol e che solo internamente si occupa di invocare le API specifiche dell’implementazione attiva. Obiettivo della tesi è estendere l’Abstraction Layer affinché supporti anche IBR-DTN, cosicché DTNperf_3 possa essere impiegato indifferentemente su DTN2, ION e IBR DTN. Il lavoro sarà ripartito su tre fasi: nella prima esploreremo IBR DTN e le sue API; nella seconda procederemo all’effettiva estensione dell’Abstraction Layer; nella terza verificheremo il funzionamento di DTNperf a seguito delle modifiche, sia in ambiente esclusivamente IBR-DTN, sia ibrido.

The hardware impairments impact on fixed-gain AF relaying performance in Nakagami-m fading

The effects of joint hardware impairments on the performance of fixed gain amplify-and-forward (AF) relaying are studied. By considering IQ imbalance at the source and destination and the nonlinear relay the outage probability over Nakagami-m fading channels is derived, and the effects of fading and hardware impairments on the system are analysed. The analytical results are verified by Monte Carlo simulations.

Full-Duplex Spectrum Sharing in Cooperative Single Carrier Systems

We propose cyclic prefix single carrier full-duplex transmission in amplify-and-forward cooperative spectrum sharing networks to achieve multipath diversity and full-duplex spectral efficiency. Integrating full-duplex transmission into cooperative spectrum sharing systems results in two intrinsic problems: 1) the residual loop interference occurs between the transmit and the receive antennas at the secondary relays and 2) the primary users simultaneously suffer interference from the secondary source (SS) and the secondary relays (SRs). Thus, examining the effects of residual loop interference under peak interference power constraint at the primary users and maximum transmit power constraints at the SS and the SRs is a particularly challenging problem in frequency selective fading channels. To do so, we derive and quantitatively compare the lower bounds on the outage probability and the corresponding asymptotic outage probability for max–min relay selection, partial relay selection, and maximum interference relay selection policies in frequency selective fading channels. To facilitate comparison, we provide the corresponding analysis for half-duplex. Our results show two complementary regions, named as the signal-to-noise ratio (SNR) dominant region and the residual loop interference dominant region, where the multipath diversity and spatial diversity can be achievable only in the SNR dominant region, however the diversity gain collapses to zero in the residual loop interference dominant region.

Secure Transmission in Cooperative Relaying Networks with Multiple Antennas

We investigate the secrecy performance of dualhop amplify-and-forward (AF) multi-antenna relaying systems over Rayleigh fading channels, by taking into account the direct link between the source and destination. In order to exploit the available direct link and the multiple antennas for secrecy improvement, different linear processing schemes at the relay and different diversity combining techniques at the destination are proposed, namely, 1) Zero-forcing/Maximal ratio combining (ZF/MRC), 2) ZF/Selection combining (ZF/SC), 3) Maximal ratio transmission/MRC (MRT/MRC) and 4) MRT/Selection combining (MRT/SC). For all these schemes, we present new closed-form approximations for the secrecy outage probability. Moreover, we investigate a benchmark scheme, i.e., cooperative jamming/ZF (CJ/ZF), where the secrecy outage probability is obtained in exact closed-form. In addition, we present asymptotic secrecy outage expressions for all the proposed schemes in the high signal-to-noise ratio (SNR) regime, in order to characterize key design parameters, such as secrecy diversity order and secrecy array gain. The outcomes of this paper can be summarized as follows: a) MRT/MRC and MRT/SC achieve a full diversity order of M + 1, ZF/MRC and ZF/SC achieve a diversity order of M, while CJ/ZF only achieves unit diversity order, where M is the number of antennas at the relay. b) ZF/MRC (ZF/SC) outperforms the corresponding MRT/MRC (MRT/SC) in the low SNR regime, while becomes inferior to the corresponding MRT/MRC (MRT/SC) in the high SNR. c) All of the proposed schemes tend to outperform the CJ/ZF with moderate number of antennas, and linear processing schemes with MRC attain better performance than those with SC.

How do Small Players Deduce Beliefs about Uncertainty? A Look at Texas Shale Oil Investments

Thesis (Ph.D.)--University of Washington, 2016-08

Random Access over Multi-Packet Reception Channels: A Mean-Field Approach

Thesis (Ph.D.)--University of Washington, 2016-06

Impact of node mobility in user-centric routing

Recent paradigms in wireless communication architectures describe environments where nodes present a highly dynamic behavior (e.g., User Centric Networks). In such environments, routing is still performed based on the regular packet-switched behavior of store-and-forward. Albeit sufficient to compute at least an adequate path between a source and a destination, such routing behavior cannot adequately sustain the highly nomadic lifestyle that Internet users are today experiencing. This thesis aims to analyse the impact of the nodes’ mobility on routing scenarios. It also aims at the development of forwarding concepts that help in message forwarding across graphs where nodes exhibit human mobility patterns, as is the case of most of the user-centric wireless networks today. The first part of the work involved the analysis of the mobility impact on routing, and we found that node mobility significance can affect routing performance, and it depends on the link length, distance, and mobility patterns of nodes. The study of current mobility parameters showed that they capture mobility partially. The routing protocol robustness to node mobility depends on the routing metric sensitivity to node mobility. As such, mobility-aware routing metrics were devised to increase routing robustness to node mobility. Two categories of routing metrics proposed are the time-based and spatial correlation-based. For the validation of the metrics, several mobility models were used, which include the ones that mimic human mobility patterns. The metrics were implemented using the Network Simulator tool using two widely used multi-hop routing protocols of Optimized Link State Routing (OLSR) and Ad hoc On Demand Distance Vector (AODV). Using the proposed metrics, we reduced the path re-computation frequency compared to the benchmark metric. This means that more stable nodes were used to route data. The time-based routing metrics generally performed well across the different node mobility scenarios used. We also noted a variation on the performance of the metrics, including the benchmark metric, under different mobility models, due to the differences in the node mobility governing rules of the models.

Distribuição de conteúdos em redes veiculares usando mecanismos de comunicação tolerantes ao atraso

The last couple of decades have been the stage for the introduction of new telecommunication networks. It is expected that in the future all types of vehicles, such as cars, buses and trucks have the ability to intercommunicate and form a vehicular network. Vehicular networks display particularities when compared to other networks due to their continuous node mobility and their wide geographical dispersion, leading to a permanent network fragmentation. Therefore, the main challenges that this type of network entails relate to the intermittent connectivity and the long and variable delay in information delivery. To address the problems related to the intermittent connectivity, a new concept was introduced – Delay Tolerant Network (DTN). This architecture is built on a Store-Carry-and-Forward (SCF) mechanism in order to assure the delivery of information when there is no end-to-end path defined. Vehicular networks support a multiplicity of services, including the transportation of non-urgent information. Therefore, it is possible to conclude that the use of a DTN for the dissemination of non-urgent information is able to surpass the aforementioned challenges. The work developed focused on the use of DTNs for the dissemination of non-urgent information. This information is originated in the network service provider and should be available on mobile network terminals during a limited period of time. In order to do so, four different strategies were deployed: Random, Least Number of Hops First (LNHF), Local Rarest Bundle First (LRBF) e Local Rarest Generation First (LRGF). All of these strategies have a common goal: to disseminate content into the network in the shortest period of time and minimizing network congestion. This work also contemplates the analysis and implementation of techniques that reduce network congestion. The design, implementation and validation of the proposed strategies was divided into three stages. The first stage focused on creating a Matlab emulator for the fast implementation and strategy validation. This stage resulted in the four strategies that were afterwards implemented in the DTNs software Helix – developed in a partnership between Instituto de Telecomunicac¸˜oes (IT) and Veniam R , which are responsible for the largest operating vehicular network worldwide that is located in Oporto city. The strategies were later evaluated on an emulator that was built for the largescale testing of DTN. Both emulators account for vehicular mobility based on information previously collected from the real platform. Finally, the strategy that presented the best overall performance was tested on a real platform – in a lab environment – for concept and operability demonstration. It is possible to conclude that two of the implemented strategies (LRBF and LRGF) can be deployed in the real network and guarantee a significant delivery rate. The LRBF strategy has the best performance in terms of delivery. However, it needs to add a significant overhead to the network in order to work. In the future, tests of scalability should be conducted in a real environment in order to confirm the emulator results. The real implementation of the strategies should be accompanied by the introduction of new types of services for content distribution.

Charge transport in poly(3-methylthiophene) schottky barrier diodes

Schottky-barrier devices were formed from electropolymerised films of poly (3-methylthiophene) (PMeT). Thermal annealing of a partially undoped film led to diodes with rectification ratios as high as 5900 at 1 V and 50,000 at 2.5 V and ideality factors slightly above 2. The temperature dependence of ac loss tangent and forward currents are identical suggesting that bulk effects dominate device behaviour event at very low forward voltages. Below 250 K forward currents are essentially independent of temperature. Preliminary TSC measurements show the presence of at least two trapping levels in the devices. © 1993.

Charge transport in poly(3-methylthiophene) schottky barrier diodes

Schottky-barrier devices were formed from electropolymerised films of poly (3-methylthiophene) (PMeT). Thermal annealing of a partially undoped film led to diodes with rectification ratios as high as 5900 at 1 V and 50,000 at 2.5 V and ideality factors slightly above 2. The temperature dependence of ac loss tangent and forward currents are identical suggesting that bulk effects dominate device behaviour event at very low forward voltages. Below 250 K forward currents are essentially independent of temperature. Preliminary TSC measurements show the presence of at least two trapping levels in the devices. © 1993.

One Step Forward: Contrasting The Effects Of Toe Clipping And Pit Tagging On Frog Survival And Recapture Probability.

Amphibians have been declining worldwide and the comprehension of the threats that they face could be improved by using mark-recapture models to estimate vital rates of natural populations. Recently, the consequences of marking amphibians have been under discussion and the effects of toe clipping on survival are debatable, although it is still the most common technique for individually identifying amphibians. The passive integrated transponder (PIT tag) is an alternative technique, but comparisons among marking techniques in free-ranging populations are still lacking. We compared these two marking techniques using mark-recapture models to estimate apparent survival and recapture probability of a neotropical population of the blacksmith tree frog, Hypsiboas faber. We tested the effects of marking technique and number of toe pads removed while controlling for sex. Survival was similar among groups, although slightly decreased from individuals with one toe pad removed, to individuals with two and three toe pads removed, and finally to PIT-tagged individuals. No sex differences were detected. Recapture probability slightly increased with the number of toe pads removed and was the lowest for PIT-tagged individuals. Sex was an important predictor for recapture probability, with males being nearly five times more likely to be recaptured. Potential negative effects of both techniques may include reduced locomotion and high stress levels. We recommend the use of covariates in models to better understand the effects of marking techniques on frogs. Accounting for the effect of the technique on the results should be considered, because most techniques may reduce survival. Based on our results, but also on logistical and cost issues associated with PIT tagging, we suggest the use of toe clipping with anurans like the blacksmith tree frog.