Topologically invariant reaction coordinates for simulating multistate chemical reactions.

Evaluating free energy profiles of chemical reactions in complex environments such as solvents and enzymes requires extensive sampling, which is usually performed by potential of mean force (PMF) techniques. The reliability of the sampling depends not only on the applied PMF method but also the reaction coordinate space within the dynamics is biased. In contrast to simple geometrical collective variables that depend only on the positions of the atomic coordinates of the reactants, the E(gap) reaction coordinate (the energy difference obtained by evaluating a suitable force field using reactant and product state topologies) has the unique property that it is able to take environmental effects into account leading to better convergence, a more faithful description of the transition state ensemble and therefore more accurate free energy profiles. However, E(gap) requires predefined topologies and is therefore inapplicable for multistate reactions, in which the barrier between the chemically equivalent topologies is comparable to the reaction activation barrier, because undesired "side reactions" occur. In this article, we introduce a new energy-based collective variable by generalizing the E(gap) reaction coordinate such that it becomes invariant to equivalent topologies and show that it yields more well behaved free energy profiles than simpler geometrical reaction coordinates.

Fracture mechanics of idealised bituminous mixes

© 2014 Taylor & Francis. The durability of asphalt pavements is strongly impaired by cracks, caused primarily by traffic loads and environmental effects. In this work, fracture behaviour of idealised asphalt mixes is investigated. Experiments on idealised asphalt mixes under pure-tension mode (mode I cracking) were performed and fracture parameters were evaluated. In these three-point bend fracture tests, the test variables were temperature and load rate. The test data were stored in an asphalt materials database and special-purpose tools were implemented to analyse and handle the laboratory data automatically. Fracture mechanism maps were constructed, showing the conditions associated with ductile, brittle and ductile-brittle transition regimes of behaviour. The mechanism maps show the failure response of the material in terms of the stress intensity factor, strain energy release rate and J-integral as a function of the temperature-compensated crack mouth opening strain rate. Fracture behaviour of asphalt mix specimens was simulated by cohesive zone model in conjunction with a novel material constitutive model for asphalt mixes. The finite element model agrees well with the experimental results and provides insights into fracture response of the notched asphalt mix beam specimens.

The design and operation of a new clapboard-type internal circulating fluidized-bed gasifier

The design and operation of a new clapboard-type internal circulating fluidized-bed gasifier is proposed in this article. By arranging the clapboard in the bed, the gasifier is thus divided into two regions, which are characterized by different fluidization velocities. The bed structure is designed so that it can guide the circulating flow passing through the two regions, and therefore the feedstock particles entrained in the flow experience longer residence time. The experimental results based on the present new design, operating in the temperature range of 790 degrees C-850 degrees C, indicate that the gas yield is from 1.6-1.9 Nm(3)/kg feedstock, the gas enthalpies are 5,345 kJ/Nm(3) for wood chip and 4,875 kJ/m(3) for rice husk, and a gasification efficiency up to 75% can be obtained.

组合白腐真菌预处理木质纤维素原料的研究

木质纤维素原料种类多、分布广、数量巨大，通过燃料乙醇生产技术、厌氧沼气发酵技术将其转化成乙醇、沼气等二次能源，一定程度上可以缓解化石能源的不断消耗所带来的能源危机，也解决了农林废弃物引起的环境污染问题。其中以木质纤维素原料生产燃料乙醇，还可以避免以淀粉类和糖类原料生产燃料乙醇时带来的“与人争粮”等一系列问题。因此具有重要的经济效益、环境效益和社会效益。 然而，木质纤维素原料结构致密，木质素包裹在纤维素、半纤维素外围，导致其很难被降解利用，必须进行适当的预处理，去除木质素，打破原有的致密结构，利于原料的后续利用。因此，预处理成为木质纤维素原料能源化利用的关键。而目前预处理环节的费用过于昂贵，于是寻找一种高效、低成本的预处理方法是当今研究的热点。 本论文采用组合白腐真菌对木质纤维素原料进行生物预处理研究，与其他物理化学法相比，该法有着专一性较强、反应温和、不造成环境污染、成本低等优势。白腐真菌主要通过分泌木质素降解酶对木质素进行降解，从而破坏原料的致密结构，提高后续利用效率。所以木质素降解酶酶活的高低是影响原料预处理效果的一个关键因素。于是本论文首先通过将白腐真菌进行组合的方式提高木质素降解酶（漆酶，Lac）酶活；接着对组合菌的菌株相互作用机理进行研究，阐明组合菌Lac 酶活提高的原因，为菌株组合提高Lac 酶活这种方法的应用提供理论依据，同时也为后续组合白腐真菌预处理木质纤维素原料提供指导；进一步采用固态发酵和木质素降解酶两种方式对木质纤维素原料进行预处理研究，最大化去除木质素成分，破坏原料的致密结构；最终对预处理后原料的酶解糖化进行初步研究，为原料后续的能源化应用奠定基础。具体研究结果如下： （1） 以实验室保存的三株主要分泌Lac 的白腐真菌为出发菌株，筛选得到一组Lac 酶活明显提高的组合菌55+m-6，其中菌株55 为Trametes trogii sp.，m-6 为Trametes versicolor sp.，组合后Lac 酶活较单菌株分别提高24.13倍和4.07 倍。组合菌的最适产酶条件为pH 6.5、C/N 16:1、Tween 80 添加量为0.01%，在该条件下组合菌的Lac 酶活峰值比未优化时提高4.11倍。 （2） 对组合菌55+m-6 菌株间相互作用机理进行研究，发现菌株之间不存在抑制作用；平板培养时，菌丝交界处Lac 酶活最高并分泌棕色色素；液体培养时，菌株m-6 对组合后Lac 酶活的提高起着更为重要的作用：菌株m-6的菌块、过滤灭菌胞外物以及高温灭菌胞外物均能明显刺激菌株55 的Lac产生；菌株55、m-6 进行组合后，同工酶种类未发生增减，但有三种Lac同工酶浓度有所提高；对菌株胞外物进行薄层层析和质谱分析，结果表明组合前后菌株胞外物中各物质在浓度上存在较大的变化。推测组合菌Lac酶活的明显提高，主要是由于菌株m-6 胞外物中的一些物质能刺激菌株55 分泌大量Lac 进行代谢，且这些刺激物质并非菌株m-6 特有，菌株55自身也可以代谢生成，但是适当的浓度才能刺激Lac 的大量分泌。 （3） 将组合菌55+m-6 用于固态发酵预处理木质纤维素原料，发现其对玉米秆的降解程度最大，在粉碎度40 目、含水率65%的最优处理条件下，处理至第15d，秸秆失重率为41.24%，其中木质素、纤维素、半纤维素均有降解，且Lac 和纤维素酶（CMC）酶活以及还原糖量均达到峰值。 （4） 对玉米秆进行木质素降解酶预处理，发现Lac/1-羟基苯并三唑（HBT）系统对玉米秆木质素的降解效果最好，在最优处理条件时，即HBT 用量0.2%、处理时间1d、Lac 用量50U/g，木质素降解率可达12.60%。预处理后玉米秆的致密结构被破坏，比表面积增大，利于后续酶与纤维素、半纤维素成分的结合。 （5） 对预处理后的玉米秆进行酶解糖化，其中组合菌固态发酵预处理后玉米秆的糖化率比对照高4.33 倍；Lac/HBT 系统预处理后玉米秆的糖化率比对照高2.99％，糖化液中主要含有木糖、葡萄糖两种单糖。 There are many kinds and large quantities of lignocellulosic biomass widely distributed on the earth. They can be converted into secondary energy such as fuel ethanol, biogas, et al., which can relieve the energy crisis caused by consumption of fossil energy resources and solve the problem of environmental pollution caused by agriculture and forestry waste. Meanwhile, the production of fuel ethanol from lignocellulosic biomass can ensure food supply to human kind instead of starch- and sugar-containing raw materials. So the energy conversion of lignocellulosic biomass contributes considerable economic, environment and social benefits. However, lignocellulosic biomass has the compact structure, in which lignin surrounds cellulose and hemicellulose, so it must be pretreated before energy usage and pretreatment is one of the most critical steps in the energy conversion of lignocellulosic biomass. At present, the cost of pretreatment is too expensive, so looking for an efficient and low-cost pre-treatment method is one of recent research hot spots. In this research, combined white rot fungi pretreatment method was used, which had some advantages in low cost, high specificity, mild reacting conditions and friendly environmental effects compared with the other physical and chemical methods. White rot fungi secrete lignin degrading enzymes to degrade the content of lignin and damage the contact structure of lignocellulosic biomass, so the activity of the lignin degrading enzymes is the key factor to the degradation effect of raw materials. Firstly, the combined fungi with high laccase activity were screened; secondly, the interaction mechanism between strains was studied, and the cause of higher laccase activity after strains combination was also preliminary clarified; under the guidance of the mechanism, lignocellulosic biomass was pretreated by the combined fungi; lastly, the enzymatic hydrolysis of pretreated lignocellulosic biomass was also preliminary studied; all of the researches could lay the foundation for the energy application of lignocellulosic biomass. The specific research results were as follows: (1) The combined fungi 55+m-6 with significant higher laccase activity were screened from the three white rot fungi stored in our lab which mainly secreted laccase. Strain 55 and strain m-6 were Trametes trogii sp. and Trametes versicolor sp., respectively. The laccase activity of combined fungi was 24.13 and 4.07-fold than strain 55 and strain m-6, respectively. The optimized condition for laccase production of the combined fungi in liquid medium was pH 6.5, C/N 16:1 and Tween 80 0.01%. In this optimized condition, the laccase activity of combined fungi was 4.11-fold higher comparing with which in non-optimized medium. (2) The interaction mechanism between strain 55 and strain m-6 was further studied, and no inhibition effect was observed. Brown pigment was secreted on the junction of the two strains on the plate, where the highest laccase activity was detected. Strain m-6 was much important to boost laccase activity of combined fungi in liquid medium, and strain 55 was stimulated by fungal plug, filter sterilized extracellular substances and high temperature sterilized extracellular substances of strain m-6 to produce laccase. The types of laccase isozymes did not change after combining strain 55 and strain m-6, but the concentrations of three types increased. Mass Spectrometry and TLC analysis of extracellular substances of each strain showed that concentration of some substances considerably changed after strains were combined. It was supposed that the cause of higher laccase activity of combined fungi was mainly due to some extracellular substances of strain m-6 with the appropriate concentration which stimulated laccase secretion of strain 55 and generated not only by strain m-6 but also by strain 55. (3) Combined fungi 55+m-6 were used to lignocellulosic biomass pretreatment with the type of solid-state fermentation. The highest degree of degradation of corn straw was obtained, including the rate of weight loss was 41.24% and the lignin, cellulose and hemicellulose were degraded partially under the optimized condition of 40 mesh, 65% water content on 15th day. Laccase, CMCase activities and content of reducing sugar reached the maximum value on that day. (4) Lignin degrading enzymes from combined fungi 55+m-6 were used for corn straw pretreatment. The most remarkable degradation of lignin in corn straw with Lac/1-hydroxybenzotriazole (HBT) system was observed, and the 12.60% lignin degradation was obtained under the optimized condition of 0.2% HBT, 50 U/g laccase for 1 d. After pretreated by Lac/HBT, the tight structure of corn straw was demolished and specific surface area increased, which had advantages for accessible of enzyme to cellulose and hemicellulose. (5) The corn straws pretreated by combined fungi 55+m-6 with the type of solid-state fermentation and Lac/HBT were used for enzymatic hydrolysis, and the saccharification rates of each pretreatment type were 4.33 times and 2.99% higher than CK, respectively. The enzymatic hydrolysis liquid of corn straw pretreated by Lac/HBT mainly contained xylose and glucose.

Genetic parameter estimates for growth traits at early stage of Pacific abalone, Haliotis discus hannai Ino

Heritability and genetic and phenotypic correlations were estimated for juvenile growth traits of Pacific abalone Haliotis discus hannai Ino. The estimates were calculated from shell length and shell width measurements on progeny resulting from 12 half-sib families and 36 full-sib families obtained using artificial fertilization of mating three females to each male. The measurements were taken at 10, 20 and 30 d after fertilization. It was found that heritability estimates based on sire component ranged from 0.23 to 0.36 for shell length and 0.21 to 0.32 for shell width. Heritability estimates from dam component were larger than those from sire component at three ages, indicating presence of maternal effects, non-additive genetic effects and common environmental effects. Phenotypic correlations were significant at three ages (P < 0.05), with values of 0.92, 0.93 and 0.92, respectively. Genetic correlations from the paternal half-sib correlation analysis were highly positive at three ages, with values of 0.50, 0.78 and 0.81, respectively. The results suggest that selective breeding is an effective approach to improving growth traits of Pacific abalone stocks.

水-岩土反应的力学与环境效应研究

The research on mechanical effects of water-rock and soil interaction on deformation and failure of rocks and soils involves three aspects of mechanics, physics and chemistry. It is the cross between geochemistry and rock mechanics and soil mechanics. To sum up, the mechanical effects of water-rock and soil interaction is related to many complex processes. Research in this respect has been being an important forward field and has broad prospects. In connection with the mechanism of the effects of the chemical action of water-rock on deformation and failure of rocks and soils, the research significance, the present state, the developments in this research domain are summarized. Author prospects the future of this research. The research of the subject should be possessed of important position in studying engineering geology and will lead directly to a new understand on geological hazard and control research. In order to investigation the macroscopic mechanics effects of chemical kinetics of water-rock interaction on the deformation and failure, calcic rock, red sandstone and grey granite reacting chemically with different aqueous solution at atmospheric temperature and atmospheric pressure are uniaxially compressed. The quantitative results concerning the changes of uniaxially compressive strength and elastic modulus under different conditions are obtained. It is found that the mechanical effects of water on rock is closely related to the chemical action of water-rock or the chemical damage in rock, and the intensity of chemical damage is direct ratio to the intensity of chemical action in water-rock system. It is also found that the hydrochemical action on rock is time-dependent through the test. The mechanism of permeation and hydrochemical action resulting in failure of loaded rock mass or propagation of fractures in rocks would be a key question in rock fracture mechanics. In this paper, the fracture mechanical effects of chemical action of water-rock and their time- and chemical environment-dependent behavior in grey granite, green granite, grey sandstone and red sandstone are analyzed by testing K_(IC) and COD of rock under different conditions. It is found that: ①the fracture mechanical effect of chemical action of water-rock is outstanding and time-dependent, and high differences exist in the influence of different aqueous solution, different rocks, different immersion ways and different velocity of cycle flow on the fracture mechanical effects in rock. ②the mechanical effects of water-rock interaction on propagation of fractures is consistent with the mechanical effects on the peak strength of rock. ③the intensity of the mechanical fracture effects increases as the intensity of chemical action of water-rock increases. ④iron and calcium ion bearing mineral or cement in rock are some key ion or chemical composition, and especially iron ion-bearing mineral resulting in chemical action of water-rock to be provided with both positive and negative mechanical effects on rock. Through the above two tests, we suggest that primary factors influencing chemical damage in rock consist of the chemical property of rock and aqueous solution, the structure or homogeneity of rocks, the flow velocity of aqueous solution passing through rock, and cause of formation or evolution of rock. The paper explores the mechanism on the mechanical effects of water-rock interaction on rock by using the theory of chemistry and rock fracture mechanics with chemical damage proposed by author, the modeling method and the energy point of view. In this paper, the concept of absorbed suction between soil grains caused by capillary response is given and expounded, and the relation and basic distinction among this absorbed suction, surface tension and capillary pressure of the soil are analyzed and established. The law of absorbed suction change and the primary factors affecting it are approached. We hold that the structure suction are changeable along with the change of the saturation state in unsaturated soils. In view of this, the concept of intrinsic structure suction and variable structure suction are given and expounded, and this paper points out: What we should study is variable structure suction when studying the effective stress. By IIIy κHH's theory of structure strength of soils, the computer method for variable structure suction is analyzed, the measure method for variable structure suction is discussed, and it reach the conclusions: ①Besides saturation state, variable structure suction is affected by grain composition and packing patter of grains. ②The internal relations are present between structure parameter N in computing structure suction and structure parameter D in computing absorbed suction. We think that some problems exit in available principle of effective stress and shear strength theory for unsaturated soil. Based on the variable structure suction and absorbed suction, the classification of saturation in soil and a principle of narrow sense effective stress are proposed for unsaturated soils. Based on generalized suction, the generalized effective stress formula and a principle of generalized effective stress are proposed for unsaturated soils. The experience parameter χ in Bishop's effective stress formula is defined, and the principal factors influencing effective stress or χ. The primary factor affecting the effective stress in unsaturated soils, and the principle classifying unsaturated soils and its mechanics methods analyzing unsaturated soils are discussed, and this paper points out: The theory on studying unsaturated soil mechanics should adopt the micromechanics method, then raise it to macromechanics and to applying. Researching the mechanical effects of chemical action of water-soil on soil is of great importance to geoenvironmental hazard control. The texture of soil and the fabric of soil mass are set forth. The tests on physical and mechanical property are performed to investigate the mechanism of the positive and negative mechanical effects of different chemical property of aqueous solution. The test results make clear that the plastic limit, liquid limit and plasticity index are changed, and there exists both positive and negative effects on specimens in this test. Based on analyzing the mechanism of the mechanical effects of water-soil interaction on soil, author thinks that hydrochemical actions being provided with mechanical effects on soil comprise three kinds of dissolution, sedimentation or crystallization. The significance of these tests lie in which it is recognized for us that we may improve, adjust and control the quality of soils, and may achieve the goal geological hazard control and prevention.The present and the significance of the research on environmental effects of water-rock and soil interaction. Various living example on geoenvironmental hazard in this field are enumerated. Following above thinking, we have approached such ideals that: ①changing the intensity and distribution of source and sink in groundwater flow system can be used to control the water-rock and soil interaction. ②the chemical action of water-rock and soil can be used to ameliorate the physical and mechanical property of rocks and soils. Lastly, the research thinking and the research methods on mechanical effects and environmental effects of water-rock and soil interaction are put forward and detailed.

红枫湖溶解有机质的分离富集、地球化学特征和环境效应

作为全球碳循环的主要组成部分，溶解有机质在水生生态系统的各种物理、化学和生物过程中起着十分重要的作用：它是湖泊异养型生物所需能量的主要提供者；是湖泊水体pH的调节剂和控制因素；能够与金属离子或有机污染物相互作用，从而影响它们的迁移转化、毒性和生物可利用性；溶解有机质也是饮用水氯化工艺中生成具有致癌作用消毒副产品的主要前驱物质。溶解有机质组成和结构十分复杂，一般由腐殖质和非腐殖质物质组成，相应的环境地球化学特征和行为也各不相同。因此，研究溶解有机质各分离组分的结构特征和环境效应，将有助于我们对溶解有机质复杂化学结构、循环特征及行为特征的深入理解；有助于揭示溶解有机质对环境中微量污染物的迁移、转化、毒性和生物有效性的影响机理和贡献因素；为水环境评价、预测、控制和管理提供科学依据。 本论文选择云贵高原山区湖泊—红枫湖为研究对象，利用XAD树脂分离技术，把湖泊水体中溶解有机质按极性的不同分成了疏水性酸、碱、中性物质和亲水性酸、碱、中性物质等六种有机组分。主要运用元素分析、有机碳分析仪、傅立叶变换红外光谱、紫外－可见分光光度，高效液相体积排阻色谱、三维荧光光谱和稳定同位素质谱仪等现代分析方法和手段，对各有机组分的地球化学特征及来源的进行了表征和探讨。同时利用荧光猝灭滴定技术研究了溶解有机质分离组分与铜的相互作用，利用顶空气相色谱法测定了各分离组分与氯气反应活性的大小，并确立了生成消毒副产物的主要前驱物质。本论文的研究成果主要有以下几点： 1.改进了分离流程：在XAD－8树脂分离溶解有机质流程的基础上，引入XAD－4树脂，对贵州红枫湖水体中溶解有机质进行了富集分离，得腐殖酸、富里酸、疏水性中性物质、亲水性酸、亲水性碱、亲水性中性物质等六种有机组分，回收率为82%。各分离组分的组成与其它天然水体的组成接近，其中以富里酸为主，占分离组分的51%。 2.溶解有机质分离组分化学结构特征的研究：元素分析表明疏水性组分具有较高的碳和硫含量，而亲水性组分O/C比较高，含有较多的含氧官能团；傅立叶变换红外光谱表明各分离组分在3424－3434 cm-1具有O-H和N-H的吸收峰，腐殖酸组分主要为含氮和聚糖物质，富里酸和亲水性酸表现强的羧基吸收峰。高效体积排阻色谱表明各六种有机组分的分子量较小，重均(Mw)和数均(Mn)分子量分别集中在1688-2355Da和1338-1928Da之间，其中Mw和紫外吸收比值(E2/E3)之间呈负相关关系；三维荧光光谱显示六种有机组分表现了4种不同类型的荧光峰，紫外区类富里酸荧光峰peakA和可见区类富里酸荧光峰peakC；疏水性中性物质还表现了两种类蛋白荧光峰peakB和peakD。荧光强度与紫外吸光系数SUVA254之间呈显著正相关关系，说明了产生荧光和紫外的物质具有某些相似的官能团，其中芳香官能团和共轭双键在这两类光谱的产生中具有重要作用。本研究进一步揭示了溶解有机质不同有机组分的分子量分布、荧光光谱特征和紫外吸收特征之间的一致性，反映了各有机组分之间的亲水、疏水与分子量、光谱特征之间的内在联系，本研究有助于加我们深对溶解有机质复杂性和相似性及化学结构与行为的进一步认识。 3.溶解有机质分离组分来源问题的探讨：我们利用δ13C及C/N比值并结合荧光光谱特征来指示溶解有机质的来源。各分离组分的δ13C及C/N比值表明富里酸主要来自陆源C3植被形成的土壤有机质，而腐殖酸、疏水性中性物质、亲水性酸、亲水性碱、亲水性中性物质属于陆源和内源的混合来源，其中腐殖酸、亲水性酸、亲水性碱接近红枫湖藻类一端，而疏水性中性物质和亲水性中性物质接近陆源一端。荧光光谱表明疏水性中性物质中含有类蛋白荧光峰，可能暗示了该组分还与人类活动有关。该研究加深了对溶解有机质来源的多样性和影响因素复杂性的认识。 4.溶解有机质分离组分与铜离子的相互作用，利用荧光猝灭滴定技术研究了分离组分与铜离子的相互作用，结果表明溶解有机质滴加铜离子后荧光强调显著降低，同时发射波长Em发生蓝移，而激发波长Ex基本不变，说明了分离有机组分在与铜离子相互作用后，π电子减少，共轭性和芳香型降低，直线型分子向非直线型分子转变；溶解有机质分离组分与铜相互作用的滴定曲线与修正的Stern-Volmer模型十分吻合；分离组分的稳定常数logK介于4.73-5.16之间（C峰）和4.64-5.24之间（A峰），logKA与logKC与总酸度以及与酚羟基之间存在显著相关性, 与羧基含量之间也有弱相关关系，说明铜离子优先与配体中强配位点（酚羟基）络合，其次为弱配位基（羧基）。该研究揭示了云贵高原山区湖泊溶解有机质分离组分与金属离子相互作用的差异性和影响因素，为水环境中金属离子迁移转化和毒性的评价提供理论依据。 5.溶解有机质分离组分卤代活性的比较：我们运用顶空气相色谱法测定了红枫湖分离组分与消毒剂反应生成有机卤代物的情况。结果表明红枫湖分离组分氯化消毒副产物主要以三氯甲烷(CHCl3)和二溴一氯甲烷(CHBr2Cl)为主，富里酸是生成三卤甲烷的主要前驱物质，同时富里酸的卤代反应活性也最强。该研究揭示了云贵高原山区湖泊中富里酸是生成消毒副产物的主要前驱物质，该组分以陆源有机质输入为主。因此，该研究对饮用水消毒具有一定的现实意义。

Assessment of the potential impacts of coasteering on rocky intertidal habitats in Wales

The relatively new recreational pursuit of coasteering, which has developed in the St David's area of Pembrokeshire, appears to be expanding rapidly. The majority of local commercial recreation providers (outdoor pursuit centers etc.) now appear to offer this pursuit. The majority of the rocky coastlines where it takes place lie within Pembrokeshire Marine Special Area of Conservation (SAC), and are also Sites of Special Scientific Interest (SSSI). No assessment has yet been undertaken of coasteering's potential impact on the intertidal habitats. Therefore the Countryside Council for Wales (CCW) commissioned the Marine Life Information Network (MarLIN) to undertake a desk study of the likely environmental effects of coasteering on rocky intertidal habitats within the Pembrokeshire marine SAC. The desk study was based on a review of the available literature, and in particular the effects of trampling on rocky intertidal communities. Communities (as biotopes) within the Pembrokeshire marine SAC likely to be exposed to coasteering activities were identified from Phase I biotope data for the area, provided by CCW. Where possible, existing research by MarLIN into the intolerance, recoverability and sensitivity of the biotopes identified, was used to identify their potential vulnerability to trampling. The literature review revealed that: - foliose canopy forming algae (e.g. fucoids) were particularly intolerant and sensitive to trampling impacts; - trampling damaged erect coralline turfs, barnacles, and resulted in an increase in bare space; in some cases paths across the shore were visible; - on brown algae dominated shores, understorey algae could suffer due to increased desiccation but algal turf species, opportunists and gastropod grazers (e.g. limpets) could increase in abundance as an indirect effect of trampling, and that - trampling impacts resulted from physical contact and wear and were dependant on the intensity, duration, and frequency of trampling, and even the type of footwear used. A total of 19 intolerant rocky intertidal biotopes were identified as potentially vulnerable to trampling and hence coasteering within the Pembrokeshire marine SAC, of which six are of Welsh importance and eight are nationally rare or scarce. Trampling is a highly localized impact and it was not possible to identify biotopes, and hence communities, actually impacted by coasteering activities in the Pembrokeshire marine SAC. In addition, the majority of the literature addresses the impacts of trampling on wave sheltered or moderately exposed brown algal dominated shores, while coasteering occurs on more wave exposed, steeply inclined shores. Therefore, direct survey of the routes used by coasteering groups within the Pembrokeshire marine SAC is required to identify the intensity, duration and frequency of trampling impact, together with the communities impacted. Given the paucity of data concerning trampling effects in the rocky intertidal in the UK, a survey of the impacts of coasteering would provide an opportunity to examine the effects of trampling and visitor use in steep rocky, wave exposed shores. The report recognizes the potential to engage coasteerers in contributing to the development of strategies for minimizing adverse impacts, recording impacts and collecting information of use in identifying climate change and the occurrence of non-native species.