The effects of a trip wire and unsteadiness on a high speed highly loaded low-pressure turbine blade

This paper presents the effect of a single spanwise 2D wire upon the downstream position of boundary layer transition under steady and unsteady inflow conditions. The study is carried out on a high turning, high-speed, low pressure turbine (LPT) profile designed to take account of the unsteady flow conditions. The experiments were carried out in a transonic cascade wind tunnel to which a rotating bar system had been added. The range of Reynolds and Mach numbers studied includes realistic LPT engine conditions and extends up to the transonic regime. Losses are measured to quantify the influence of the roughness with and without wake passing. Time resolved measurements such as hot wire boundary layer surveys and surface unsteady pressure are used to explain the state of the boundary layer. The results suggest that the effect of roughness on boundary layer transition is a stability governed phenomena, even at high Mach numbers. The combination of the effect of the roughness elements with the inviscid Kelvin-Helmholtz instability responsible for the rolling up of the separated shear layer (Stieger [1]) is also examined. Wake traverses using pneumatic probes downstream of the cascade reveal that the use of roughness elements reduces the profile losses up to exit Mach numbers of 0.8. This occurs with both steady and unsteady inflow conditions.

Import substitution of combination wire rope. Part 1. Design, production and evaluation of a prototype combination wire rope

Model combination wire ropes with different covering materials were prepared and worked out specification for the prototype. A table model hand operated wire rope twisting machine was also developed for this. Prototype combination wire rope was twisted in collaboration with M/s South India Wire Ropes Ltd., Alwaye. Specification details, properties and field performance of the prototype studied are reported.

Import substitution of combination wire rope. Part 2. Production and standardisation of 17 mm dia combination wire rope.

The prototype combination wire rope (Cift-CWR 1) developed for deep sea trawling was further studied for improvement, optimisation of efficiency and standardization. A series of improved prototype combination wire ropes (Cift-CWR 2 to 6) were twisted and evaluated their mechanical properties and reported in this paper with recommendations for a standard 17mm dia combination wire rope of 6S (7C+8+1 Scr) + 6 Crs(6+1+1 Crc) construction.

Import substitution of combination wire rope. Part 3: Comparison of standard Cift-CWR and imported combination wire rope

Tensile and extension properties of standard Cift-CWR and imported combination wire ropes from Japan, Norway and Denmark are studied and the analysis is presented in the paper. Tensile and chemical properties of steel wire, tensile and abrasive properties of PP covering, effect of twist on material at different stages are worked out and reported.

Evaluation of external anchor tags for estimation of growth and survival in tilapia (Oreochromis shiranus chilwae Trewavas)

The effects of tagging with Roy FD-68B T-bar anchor tags on estimates of growth in Tilapia (Oreochromis shiranus chilwae) were investigated in a pond and in a field experiment. In the pond experiment, mean length increments of tagged and marked fish were compared. In the field experiment growth of tagged and "untouched" individual wild fish were compared by measuring scale circuli spacing (Circ.), which is correlated to instantaneous growth rate. Length increments of tagged and untagged/marked fish were not significantly different in either experiment. In the pond experiment, the total mortality rate in the small tagged fish was significantly higher than in the marked fish. The recoveries of tagged fish in the pond experiment increased with fish size. Recoveries exceeded 80% at lengths over 13 cm TL. The ratios of tagged to marked recoveries were 1.02 and 0.74 for large and small fish respectively. The study shows that tagging of Tilapia with Roy anchor tags does not in general alter the growth rates of the fish.

Mismatched shaping schemes for bit-interleaved coded modulation

We consider bit-interleaved coded modulation (BICM) schemes where, instead of the true bit or symbol probabilities and the constellation used at the transmitter, the decoder uses arbitrary probabilities or reference constellations. We study the corresponding low- and high- signal-to-noise-ratio regimes and show that even in the presence of this extra sources of mismatch, BICM has a negligible penalty with respect to coded modulation. © 2012 IEEE.